Add FREESCALE_IMX_PLATFORM_IMX8DXL
v2 cover Add FREESCALE_IMX_PLATFORM_IMX8DXL
From: Stefan Nickl <[email protected]>
Quoted 2 lines
Also, please run "make legal-info", to make sure the license information is still correct.
I updated the licenses as well. The actual content changes appear inconsequential, but I am not a lawyer.
Quoted 2 lines
Are these firmware files new in 1.15.0, or were they already present in 1.8.0 ?
mx8dxl-evk-scfw-tcm.bin was already present in 1.8.0. Interestingly the one from 1.15.0 is only a quarter the size.
Quoted 1 line
How can this work if
BR2_PACKAGE_IMX_SECO_MX8DXLB0is not defined?
I reckon it gets defined from this line, which I adapted from the MX8QXC0 line just above it:
default BR2_PACKAGE_IMX_SECO_MX8DXLB0 if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL
Stefan Nickl (5):
package/freescale-imx/firmware-imx: bump version to 8.20 package/freescale-imx/imx-seco: bump version to 5.9.0 package/freescale-imx/imx-sc-firmware: bump version to 1.15.0 configs/freescale_imx8dxlevk: new defconfig
Add BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL
.../common/imx/imx8-bootloader-prepare.sh | 2 + board/freescale/common/imx/post-image.sh | 2 + board/freescale/imx8dxlevk/readme.txt | 69 +++++++++++++++++++ configs/freescale_imx8dxlevk_defconfig | 39 +++++++++++ package/freescale-imx/Config.in | 7 +- package/freescale-imx/firmware-imx/Config.in | 1 + .../firmware-imx/firmware-imx.hash | 6 +- .../firmware-imx/firmware-imx.mk | 2 +- .../freescale-imx/imx-sc-firmware/Config.in | 3 +- .../imx-sc-firmware/imx-sc-firmware.hash | 6 +- .../imx-sc-firmware/imx-sc-firmware.mk | 6 +- package/freescale-imx/imx-seco/Config.in | 6 +- package/freescale-imx/imx-seco/imx-seco.hash | 6 +- package/freescale-imx/imx-seco/imx-seco.mk | 2 +- 14 files changed, 141 insertions(+), 16 deletions(-) create mode 100644 board/freescale/imx8dxlevk/readme.txt create mode 100644 configs/freescale_imx8dxlevk_defconfig
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 1/5 package/freescale-imx/firmware-imx: bump version to 8.20
From: Stefan Nickl <[email protected]>
--- package/freescale-imx/firmware-imx/firmware-imx.hash | 6 +++--- package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
package/freescale-imx/firmware-imx/firmware-imx.hash +3 -3
@@ -1,5 +1,5 @@ # Locally calculated -sha256 937e196476b8e95b4b7f2501a14c8326d8a0649f8a3f9228b72373770a08deb3 firmware-imx-8.15.bin -sha256 35188e65dbb9c7da4bbcb77c7726e835607f9f41b8b44149806ea51429ca9a31 COPYING -sha256 30f61825583b4c26d29a798ad7e4c8ef2f2f390b1e964af302d2dc40e93cb0a4 EULA +sha256 f6dc6a5c8fd9b913a15360d3ccd53d188db05a08a8594c518e57622478c72383 firmware-imx-8.20.bin +sha256 913ba38d4be97361c3d0fa9bf2f6dbe7b1c0c41213dd268fb6738db9704dbe32 COPYING +sha256 4fd8bb45a2ec22117d20cfea84370e2a3a2cd99e8e177138bed0938137b1aeb3 EULA sha256 40d02f6d6b4e94d9307529408f372f5a9908cf3d156ec533a4e54274b40f271e SCR.txt
package/freescale-imx/firmware-imx/firmware-imx.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -FIRMWARE_IMX_VERSION = 8.15 +FIRMWARE_IMX_VERSION = 8.20 FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE) FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).bin
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2 1/5] package/freescale-imx/firmware-imx: bump version to 8.20
Stefan, All,
On 2023-07-24 21:16 +0200, [email protected] spake thusly:
Quoted 13 lines
From: Stefan Nickl <[email protected]>
Signed-off-by Stefan Nickl <[email protected]>--- package/freescale-imx/firmware-imx/firmware-imx.hash | 6 +++--- package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)package/freescale-imx/firmware-imx/firmware-imx.hash +0
-0
package/freescale-imx/firmware-imx/firmware-imx.hash line 4
Quoted 7 lines
package/freescale-imx/firmware-imx/firmware-imx.hash +3
-3@@ -1,5 +1,5 @@ # Locally calculated -sha256 937e196476b8e95b4b7f2501a14c8326d8a0649f8a3f9228b72373770a08deb3 firmware-imx-8.15.bin -sha256 35188e65dbb9c7da4bbcb77c7726e835607f9f41b8b44149806ea51429ca9a31 COPYING -sha256 30f61825583b4c26d29a798ad7e4c8ef2f2f390b1e964af302d2dc40e93cb0a4 EULA +sha256 f6dc6a5c8fd9b913a15360d3ccd53d188db05a08a8594c518e57622478c72383 firmware-imx-8.20.bin +sha256 913ba38d4be97361c3d0fa9bf2f6dbe7b1c0c41213dd268fb6738db9704dbe32 COPYING +sha256 4fd8bb45a2ec22117d20cfea84370e2a3a2cd99e8e177138bed0938137b1aeb3 EULA
I see Thomas already inquired about the license changes, and that you mentioned on your cover letter that it "appears inconsequential".
However, we need the explanations to be in the commit log, not the cover letter, so that they appear in the history (the cover letter does not end up in the repository).
And we need the explanations to be explicit, even if terse. In this case, the bulk of the changes are:
- update to copyright years (2022 -> 2023)
- switch from ASCCI double quotes to fancy Unicode ones ("" -> “”)
- reflow the license text
- identify new third-parties and their conditions
It does not look like it is changing much.
Care to check the other packages, please?
Regards,
Yann E. MORIN.
Quoted 21 lines
package/freescale-imx/firmware-imx/firmware-imx.hash +0
-0sha256 40d02f6d6b4e94d9307529408f372f5a9908cf3d156ec533a4e54274b40f271e SCR.txtpackage/freescale-imx/firmware-imx/firmware-imx.mk +1
-1@@ -4,7 +4,7 @@ # ################################################################################ -FIRMWARE_IMX_VERSION = 8.15 +FIRMWARE_IMX_VERSION = 8.20 FIRMWARE_IMX_SITE = $(FREESCALE_IMX_SITE) FIRMWARE_IMX_SOURCE = firmware-imx-$(FIRMWARE_IMX_VERSION).binSignature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 2/5 package/freescale-imx/imx-seco: bump version to 5.9.0
In reply to [email protected]From: Stefan Nickl <[email protected]>
--- package/freescale-imx/imx-seco/imx-seco.hash | 6 +++--- package/freescale-imx/imx-seco/imx-seco.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
package/freescale-imx/imx-seco/imx-seco.hash +3 -3
@@ -1,4 +1,4 @@ # Locally calculated -sha256 08cf25a4be6841ca7264a50b29c311b386eae1c02fced8a3b55fd04213acb4bc imx-seco-3.7.5.bin -sha256 72edc2072c86d93aa1993d15d4d19d96270af3749b0108995ad50c81d1461f52 EULA -sha256 9c16421e7c702f56756650b8ac954d34556327e598a8666e6e8f4eb3a1aa95f1 COPYING +sha256 c3bd761f457e939035b01a0ab36e79064a2a1bc6c3cdb3cd847f7f38df0964df imx-seco-5.9.0.bin +sha256 654f0c4ce6d08f9a6d74e29c58206742cb7469a6a7c25413028a9bdbe647aa13 EULA +sha256 5bd7aab9dc380a6f9577443b2e90bd5ca73d9528175fad04b6d17da43a05a48e COPYING
package/freescale-imx/imx-seco/imx-seco.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -IMX_SECO_VERSION = 3.7.5 +IMX_SECO_VERSION = 5.9.0 IMX_SECO_SITE = $(FREESCALE_IMX_SITE) IMX_SECO_SOURCE = imx-seco-$(IMX_SECO_VERSION).bin
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 3/5 package/freescale-imx/imx-sc-firmware: bump version to 1.15.0
In reply to [email protected]From: Stefan Nickl <[email protected]>
--- package/freescale-imx/imx-sc-firmware/imx-sc-firmware.hash | 6 +++--- package/freescale-imx/imx-sc-firmware/imx-sc-firmware.mk | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
package/freescale-imx/imx-sc-firmware/imx-sc-firmware.hash +3 -3
@@ -1,4 +1,4 @@ # Locally calculated -sha256 24a647237c0077ce0172563d67fcbc5e8f231bad7cf55a2436848c89579c5a06 imx-sc-firmware-1.8.0.bin -sha256 a07e8df685161553d7e0b78b8b93ebe9086d95bb8635abff0ed3247992181e85 EULA -sha256 4f3cc2dcbe3b7369bd4a51df749f432b69d8189fc2bde88f9fadbec73c686683 COPYING +sha256 1272ac5c31a88017ef548721f3acf930a7eda6ac73aa9f41b5f0cade9d5c0e5f imx-sc-firmware-1.15.0.bin +sha256 654f0c4ce6d08f9a6d74e29c58206742cb7469a6a7c25413028a9bdbe647aa13 EULA +sha256 5bd7aab9dc380a6f9577443b2e90bd5ca73d9528175fad04b6d17da43a05a48e COPYING
package/freescale-imx/imx-sc-firmware/imx-sc-firmware.mk +1 -1
@@ -4,7 +4,7 @@ # ################################################################################ -IMX_SC_FIRMWARE_VERSION = 1.8.0 +IMX_SC_FIRMWARE_VERSION = 1.15.0 IMX_SC_FIRMWARE_SITE = $(FREESCALE_IMX_SITE) IMX_SC_FIRMWARE_SOURCE = imx-sc-firmware-$(IMX_SC_FIRMWARE_VERSION).bin
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 4/5 configs/freescale_imx8dxlevk: new defconfig
In reply to [email protected]From: Stefan Nickl <[email protected]>
--- board/freescale/imx8dxlevk/readme.txt | 69 ++++++++++++++++++++++++++ configs/freescale_imx8dxlevk_defconfig | 39 +++++++++++++++ 2 files changed, 108 insertions(+) create mode 100644 board/freescale/imx8dxlevk/readme.txt create mode 100644 configs/freescale_imx8dxlevk_defconfig
board/freescale/imx8dxlevk/readme.txt new file +69 -0
@@ -0,0 +1,69 @@ +****************************** +Freescale i.MX8DXL WEVK board +****************************** + +This file documents the Buildroot support for the Freescale i.MX8DXL WEVK +board. + +Build +===== + +First, configure Buildroot for the i.MX8DXL WEVK board: + + make freescale_imx8dxlevk_defconfig + +Build all components: + + make + +You will find in output/images/ the following files: + - ahab-container.img + - bl31.bin + - boot.vfat + - Image + - imx8-boot-sd.bin + - imx8dxl-evk.dtb + - mkimg.commit + - mx8dxl-ddr3-evk-scfw-tcm.bin + - mx8dxl-evk-scfw-tcm.bin + - mx8dxl-phantom-mek-scfw-tcm.bin + - mx8dxl-val-scfw-tcm.bin + - rootfs.ext2 + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - u-boot-atf.bin + - u-boot.bin + - u-boot-hash.bin + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=output/images/sdcard.img of=/dev/<your-sd-device> + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/freescale/common/imx/genimage.cfg.template_imx8. + +Boot the i.MX8DXL WEVK board +============================ + +To boot your newly created system: +- insert the SD card in the SD slot of the board; +- Configure the boot switch as follows: +SW1: ON ON OFF OFF +- put a micro USB cable into the Debug USB Port and connect using a terminal + emulator at 115200 bps, 8n1; +- power on the board. + +Enjoy!
configs/freescale_imx8dxlevk_defconfig new file +39 -0
@@ -0,0 +1,39 @@ +BR2_aarch64=y +BR2_cortex_a35=y +BR2_ARM_FPU_VFPV3=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/freescale/common/imx/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/fsl-imx8dxl-evk.dtb" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.1.22-2.0.0)/linux-imx-lf-6.1.22-2.0.0.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v8" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8dxl-evk" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_IMX_SC_FIRMWARE=y +BR2_PACKAGE_IMX_SECO=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.1.22-2.0.0)/imx-atf-lf-6.1.22-2.0.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8dxl" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.1.22-2.0.0)/uboot-imx-lf-6.1.22-2.0.0.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8dxl_evk" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_IMX_MKIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 5/5 Add BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL
In reply to [email protected]From: Stefan Nickl <[email protected]>
--- board/freescale/common/imx/imx8-bootloader-prepare.sh | 2 ++ board/freescale/common/imx/post-image.sh | 2 ++ package/freescale-imx/Config.in | 7 ++++++- package/freescale-imx/firmware-imx/Config.in | 1 + package/freescale-imx/imx-sc-firmware/Config.in | 3 ++- package/freescale-imx/imx-sc-firmware/imx-sc-firmware.mk | 4 ++++ package/freescale-imx/imx-seco/Config.in | 6 ++++-- 7 files changed, 21 insertions(+), 4 deletions(-)
board/freescale/common/imx/imx8-bootloader-prepare.sh +2 -0
@@ -63,6 +63,8 @@ main () dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128 if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then ${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin + elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then + ${HOST_DIR}/bin/mkimage_imx8 -soc DXL -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8dxl-evk-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin else ${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin fi
board/freescale/common/imx/post-image.sh +2 -0
@@ -46,6 +46,8 @@ genimage_type() echo "genimage.cfg.template_imx8" elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_imx8" + elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL=y$" ${BR2_CONFIG}; then + echo "genimage.cfg.template_imx8" elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then echo "genimage.cfg.template_no_boot_part_spl"
package/freescale-imx/Config.in +6 -1
@@ -57,6 +57,10 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MP config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X bool "imx8x" + +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL + bool "imx8dxl" + endchoice config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
@@ -100,7 +104,8 @@ config BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN || \ BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MP || \ - BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X || \ + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL source "package/freescale-imx/imx-alsa-plugins/Config.in" source "package/freescale-imx/imx-codec/Config.in"
package/freescale-imx/firmware-imx/Config.in +1 -0
@@ -34,6 +34,7 @@ config BR2_PACKAGE_FIRMWARE_IMX_VPU_FW_NAME default "imx6" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q default "imx8" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 default "imx8" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + default "imx8" if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW bool
package/freescale-imx/imx-sc-firmware/Config.in +2 -1
@@ -1,7 +1,8 @@ config BR2_PACKAGE_IMX_SC_FIRMWARE bool "imx-sc-firmware" depends on BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 || \ - BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X || \ + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL help System Control Unit Firmware blobs for the Freescale i.MX8 SoCs.
package/freescale-imx/imx-sc-firmware/imx-sc-firmware.mk +4 -0
@@ -25,6 +25,10 @@ define IMX_SC_FIRMWARE_INSTALL_IMAGES_CMDS cp $(@D)/mx8qx-mek-scfw-tcm.bin $(BINARIES_DIR)/mx8qx-mek-scfw-tcm.bin cp $(@D)/mx8qx-val-scfw-tcm.bin $(BINARIES_DIR)/mx8qx-val-scfw-tcm.bin endef +else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL),y) +define IMX_SC_FIRMWARE_INSTALL_IMAGES_CMDS + cp $(@D)/mx8dxl-evk-scfw-tcm.bin $(BINARIES_DIR)/ +endef else ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8),y) define IMX_SC_FIRMWARE_INSTALL_IMAGES_CMDS cp $(@D)/mx8qm-*-scfw-tcm.bin $(BINARIES_DIR)/
package/freescale-imx/imx-seco/Config.in +4 -2
@@ -1,7 +1,8 @@ config BR2_PACKAGE_IMX_SECO bool "imx-seco" depends on BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 || \ - BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X || \ + BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL help Firmware file for the i.MX8 and i.MX8X Security Controller.
@@ -14,6 +15,7 @@ choice prompt "i.MX Seco Firmware Release" default BR2_PACKAGE_IMX_SECO_MX8QMB0 if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8 default BR2_PACKAGE_IMX_SECO_MX8QXC0 if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + default BR2_PACKAGE_IMX_SECO_MX8DXLB0 if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL help Select the appropriate ahab container image to install to match the iMX asics revision.
@@ -30,7 +32,7 @@ config BR2_PACKAGE_IMX_SECO_MX8DXLA1 config BR2_PACKAGE_IMX_SECO_MX8DXLB0 bool "imx-seco-mx8dxlb0" - depends on BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X + depends on BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL config BR2_PACKAGE_IMX_SECO_MX8QMB0 bool "imx-seco-mx8qmb0"
Signature · 6 lines
2.41.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Stefan,
Quoted 6 lines · On Mon, 24 Jul 2023 21:16:33 +0200 [email protected] wrote:
Stefan Nickl (5):
package/freescale-imx/firmware-imx: bump version to 8.20 package/freescale-imx/imx-seco: bump version to 5.9.0 package/freescale-imx/imx-sc-firmware: bump version to 1.15.0 configs/freescale_imx8dxlevk: new defconfig
AddBR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL
Thanks, series applied, after some changes:
- Add explanations about license file hash changes in PATCH 1/5, 2/5 and 3/5
- Invert patch 4/5 and 5/5, otherwise you add the defconfig that uses BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8DXL before the option exists
- Add entries in the DEVELOPERS file for the defconfig and readme.txt files. This way you will be notified if there are build failures affecting this defconfig.
Thanks for this contribution!
Thomas Petazzoni
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot