arm64: dts: ti: k3-j784s4: Add UFS support
Subsystems (2)
v2 cover arm64: dts: ti: k3-j784s4: Add UFS support
This patch series adds UFS support for J784S4 SOC, UFS is kept disabled at SOC level, and enabled in EVM where UFS flash is present.
This patch is tested by enabling below configs on top of defconfig CONFIG_SCSI_UFS_BSG=yCONFIG_SCSI_UFS_CDNS_PLATFORM=y CONFIG_SCSI_UFS_TI_J721E=y
Change log:
Changes in v2
v1: https://lore.kernel.org/all/[email protected]/
Add DT node for UFS:
Corrected typo
Added 0x00 instead of 0x0 to align with test of file
Added Tested by
Add Support for UFS peripheral
Added Tested by
Test logs of v1 patch
https://gist.github.com/uditkumarti/ab188e4b433058ae86734cd46eff7d94
Udit Kumar (2):
arm64: dts: ti: k3-j784s4-main: Add DT node for UFS
arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 24 ++++++++++++++++++++++ 2 files changed, 28 insertions(+)
Signature · 1 line
2.34.1
PATCH v2 1/2 arm64: dts: ti: k3-j784s4-main: Add DT node for UFS
Add UFS support present in J784S4 SOC.
UFS is documented in J784S4 TRM[1]
Section 12.3.7 'Universal Flash Storage (UFS) Interface'
[1] http://www.ti.com/lit/zip/spruj52
--- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +24 -0
@@ -1370,6 +1370,30 @@ main_spi7: spi@2170000 { status = "disabled"; }; + ufs_wrapper: ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x00 0x4e80000 0x00 0x100>; + power-domains = <&k3_pds 387 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 387 3>; + assigned-clocks = <&k3_clks 387 3>; + assigned-clock-parents = <&k3_clks 387 6>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + ufs@4e84000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x00 0x4e84000 0x00 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <250000000 250000000>, <19200000 19200000>, + <19200000 19200000>; + clocks = <&k3_clks 387 1>, <&k3_clks 387 3>, <&k3_clks 387 3>; + clock-names = "core_clk", "phy_clk", "ref_clk"; + dma-coherent; + }; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j721s2-r5fss"; ti,cluster-mode = <1>;
Signature · 1 line
2.34.1
PATCH v2 2/2 arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral
In reply to Udit KumarJ784S4 EVM board has 32GB Non-Volatile UFS Memory. So enabling UFS at board level.
UFS flash details are documented in board data sheet[1] Section 1.2 Key Features and Interfaces.
[1] https://www.ti.com/lit/pdf/spruj62
--- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +4 -0
@@ -430,6 +430,10 @@ &main_uart8 { pinctrl-0 = <&main_uart8_pins_default>; }; +&ufs_wrapper { + status = "okay"; +}; + &fss { status = "okay"; };
Signature · 1 line
2.34.1
Quoted 25 lines · Udit Kumar
This patch series adds UFS support for J784S4 SOC, UFS is kept disabled at SOC level, and enabled in EVM where UFS flash is present.
This patch is tested by enabling below configs on top of defconfig
CONFIG_SCSI_UFS_BSG=yCONFIG_SCSI_UFS_CDNS_PLATFORM=yCONFIG_SCSI_UFS_TI_J721E=yChange log:
Changes in v2
v1: https://lore.kernel.org/all/[email protected]/
Add DT node for UFS:
Corrected typo
Added0x00instead of0x0to align with test of file
Added Tested byAdd Support for UFS peripheral
Added Tested byTest logs of v1 patch
https://gist.github.com/uditkumarti/ab188e4b433058ae86734cd46eff7d94
Quoted 8 lines
Udit Kumar (2):
arm64: dts: ti: k3-j784s4-main: Add DT node for UFS
arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheralarch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 24 ++++++++++++++++++++++ 2 files changed, 28 insertions(+)
Signature · 7 lines
Regards Vignesh _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Udit Kumar,
Quoted 10 lines · Udit Kumar
This patch series adds UFS support for J784S4 SOC, UFS is kept disabled at SOC level, and enabled in EVM where UFS flash is present.
This patch is tested by enabling below configs on top of defconfig
CONFIG_SCSI_UFS_BSG=yCONFIG_SCSI_UFS_CDNS_PLATFORM=yCONFIG_SCSI_UFS_TI_J721E=y[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/2] arm64: dts: ti: k3-j784s4-main: Add DT node for UFS
commit: f33f5e4c801b7f1838f05aae81eaed8189a1eac4
[2/2] arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral
commit: 5d55545cc2da8ad320b73705b26a5c0a837b20daAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D