Skip to contentSkip to conversation

doc: ti: Clarify required file names for K3 platforms

PATCH In review Tom Rini 2 participants 2 messages Jul 25, 2023 – Jul 26, 2023

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

PATCH 1/1 doc: ti: Clarify required file names for K3 platforms

Now that we are using binman in all cases on these platforms, reword things to be clearer that for filesystem booting we need to use a specific name for each component.

---
Cc: Neha Malcom Francis <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>

---
 doc/board/ti/am62x_sk.rst  | 3 ++-
 doc/board/ti/am65x_evm.rst | 3 ++-
 doc/board/ti/j7200_evm.rst | 3 ++-
 doc/board/ti/j721e_evm.rst | 4 +++-
 4 files changed, 9 insertions(+), 4 deletions(-)
doc/board/ti/am62x_sk.rst +2 -1
index 3a122b075641..0721ee30749a 100644
@@ -169,7 +169,8 @@ Build procedure:
 
 Target Images
 --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, tispl.bin and u-boot.img.  Each SoC
+variant (GP, HS-FS, HS-SE) requires a different source for these files.
 
  - GP
 
doc/board/ti/am65x_evm.rst +2 -1
index 300cd3e9b960..82bae7c633ab 100644
@@ -170,7 +170,8 @@ Build procedure:
 
 Target Images
 --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img.
+Each SoC variant (GP and HS) requires a different source for these files.
 
 - GP
 
doc/board/ti/j7200_evm.rst +2 -1
index 5e3d75059ca5..d4af3f435349 100644
@@ -172,7 +172,8 @@ Build procedure:
 
 Target Images
 --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, tispl.bin and u-boot.img.  Each SoC
+variant (GP, HS-FS, HS-SE) requires a different source for these files.
 
  - GP
 
doc/board/ti/j721e_evm.rst +3 -1
index 46244197f346..a93160b77482 100644
@@ -183,7 +183,9 @@ Build procedure:
 
 Target Images
 --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img.
+Each SoC variant (GP, HS-FS and HS-SE) requires a different source for these
+files.
 
  - GP
 
Signature · 1 line
2.34.1
Reviewed-by on v1 1/1
#1 lore raw

Hi Tom,

Thanks for the patch!

Quoted 62 lines · Tom Rini

Now that we are using binman in all cases on these platforms, reword things to be clearer that for filesystem booting we need to use a specific name for each component.

---
Cc: Neha Malcom Francis <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>

---
  doc/board/ti/am62x_sk.rst  | 3 ++-
  doc/board/ti/am65x_evm.rst | 3 ++-
  doc/board/ti/j7200_evm.rst | 3 ++-
  doc/board/ti/j721e_evm.rst | 4 +++-
  4 files changed, 9 insertions(+), 4 deletions(-)
doc/board/ti/am62x_sk.rst +2 -1
index 3a122b075641..0721ee30749a 100644
@@ -169,7 +169,8 @@ Build procedure:
 
  Target Images
  --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, tispl.bin and u-boot.img.  Each SoC
+variant (GP, HS-FS, HS-SE) requires a different source for these files.
 
   - GP
 
doc/board/ti/am65x_evm.rst +2 -1
index 300cd3e9b960..82bae7c633ab 100644
@@ -170,7 +170,8 @@ Build procedure:
 
  Target Images
  --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img.
+Each SoC variant (GP and HS) requires a different source for these files.
 
  - GP
 
doc/board/ti/j7200_evm.rst +2 -1
index 5e3d75059ca5..d4af3f435349 100644
@@ -172,7 +172,8 @@ Build procedure:
 
  Target Images
  --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, tispl.bin and u-boot.img.  Each SoC
+variant (GP, HS-FS, HS-SE) requires a different source for these files.
 
   - GP
 
doc/board/ti/j721e_evm.rst +0 -0
index 46244197f346..a93160b77482 100644

doc/board/ti/j721e_evm.rst Build procedure: · line 191

Quoted 10 lines
doc/board/ti/j721e_evm.rst +3 -1
@@ -183,7 +183,9 @@ Build procedure:
 
  Target Images
  --------------
-Copy the below images to an SD card and boot:
+In order to boot we need tiboot3.bin, sysfw.itb, tispl.bin and u-boot.img.
+Each SoC variant (GP, HS-FS and HS-SE) requires a different source for these
+files.
 
   - GP
 
Signature · 2 lines
Thanking You
Neha Malcom Francis