Skip to contentSkip to conversation

arm: dts: Sync k3-am62 with upstream

PATCH Superseded Nishanth Menon 3 participants 7 messages Jul 26, 2023 – Jul 27, 2023

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover arm: dts: Sync k3-am62 with upstream

I have picked up part of Sjoerd's series[1] to keep it constrained just to dts sync at this point rather than adding newer functionality on top.

You can find the full series in [2].

Attempting am625 as a start of a series of clean ups for device tree for u-boot, but will love to get any review comments to improve this series up.

This series also depends on:
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]

baseline:
master 197aa22e6506 Merge branch 'master' of git://git.denx.de/u-boot-coldfire

Boot log: https://gist.github.com/nmenon/a1705c385189c2367d8cad1debcf8155

Changes since V1:
* Added dependency on CPSW cleanup patches.
* Dropped the hack done in u-boot.dtsi to use kernel dts as is for cpsw

V1: https://lore.kernel.org/all/[email protected]/

Changes since RFC:
* dependencies are all merged on master now.
* No new dependencies in this series, though the issue with uboot dtb not working for kernel is not a regression, it should probably be handled as a fixup part of RC Cycle.

RFC: https://lore.kernel.org/u-boot/[email protected]/

Nishanth Menon (1):
arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

Sjoerd Simons (2):
omap: timer: add ti,am654-timer compatibility
arm: mach-k3: am62: Add timer0 id to the dev list

 arch/arm/dts/k3-am62-main.dtsi       | 389 +++++++++++++++++++++++--
 arch/arm/dts/k3-am62-mcu.dtsi        |  66 +++++
 arch/arm/dts/k3-am62-thermal.dtsi    |  33 +++
 arch/arm/dts/k3-am62-wakeup.dtsi     |  33 ++-
 arch/arm/dts/k3-am62.dtsi            |  11 +-
 arch/arm/dts/k3-am625-r5-sk.dts      |  92 +-----
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |  33 +--
 arch/arm/dts/k3-am625-sk.dts         | 286 ++-----------------
 arch/arm/dts/k3-am625.dtsi           |  54 +++-
 arch/arm/dts/k3-am62x-sk-common.dtsi | 412 +++++++++++++++++++++++++++
 arch/arm/dts/k3-pinctrl.h            |  53 ++++
 arch/arm/mach-k3/am62x/dev-data.c    |   1 +
 drivers/timer/omap-timer.c           |   1 +
 13 files changed, 1066 insertions(+), 398 deletions(-)
 create mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
 create mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
 create mode 100644 arch/arm/dts/k3-pinctrl.h

[1] https://lore.kernel.org/all/[email protected]/
[2] https://github.com/nmenon/fix-k3-dt-u-boot/commits/fdt-fixup-s1-am625-rev3.2

Signature · 1 line
2.40.0
#1 lore raw

PATCH v2 1/3 omap: timer: add ti,am654-timer compatibility

From: Sjoerd Simons <[email protected]>

THe TI AM654 timer is compatible with the omap-timer implementation, so add it to the id list

---
No Changes since V1.

V1: https://lore.kernel.org/all/[email protected]/
Original Patch: https://lore.kernel.org/r/[email protected]

 drivers/timer/omap-timer.c | 1 +
 1 file changed, 1 insertion(+)
drivers/timer/omap-timer.c +1 -0
index aa2e4360c1bb..9b6d97dae677 100644
@@ -114,6 +114,7 @@ static const struct udevice_id omap_timer_ids[] = {
 	{ .compatible = "ti,am335x-timer" },
 	{ .compatible = "ti,am4372-timer" },
 	{ .compatible = "ti,omap5430-timer" },
+	{ .compatible = "ti,am654-timer" },
 	{}
 };
 
Signature · 1 line
2.40.0
#2 lore raw

Re: [PATCH V2 1/3] omap: timer: add ti,am654-timer compatibility

Quoted 3 lines · Nishanth Menon

From: Sjoerd Simons <[email protected]>

THe TI AM654 timer is compatible with the omap-timer implementation, so

s/THe/The

Quoted 1 line

add it to the id list

s/id list/compatible ID list.

Andrew

Quoted 29 lines

---
No Changes since V1.

V1: https://lore.kernel.org/all/[email protected]/
Original Patch: https://lore.kernel.org/r/[email protected]

  drivers/timer/omap-timer.c | 1 +
  1 file changed, 1 insertion(+)
drivers/timer/omap-timer.c +1 -0
index aa2e4360c1bb..9b6d97dae677 100644
@@ -114,6 +114,7 @@ static const struct udevice_id omap_timer_ids[] = {
  	{ .compatible = "ti,am335x-timer" },
  	{ .compatible = "ti,am4372-timer" },
  	{ .compatible = "ti,omap5430-timer" },
+	{ .compatible = "ti,am654-timer" },
  	{}
  };
 
#3 lore raw

PATCH v2 2/3 arm: mach-k3: am62: Add timer0 id to the dev list

In reply to Nishanth Menon

From: Sjoerd Simons <[email protected]>

Timer0 is used by u-boot as the tick timer; Add it to the soc devices list so it can be enabled via the k3 power controller.

---
No change since V1

V1: https://lore.kernel.org/all/[email protected]/
Original patch: https://lore.kernel.org/r/[email protected]

 arch/arm/mach-k3/am62x/dev-data.c | 1 +
 1 file changed, 1 insertion(+)
arch/arm/mach-k3/am62x/dev-data.c +1 -0
index 1a6f9e2ca03e..59c95df2a887 100644
@@ -58,6 +58,7 @@ static struct ti_dev soc_dev_list[] = {
 	PSC_DEV(161, &soc_lpsc_list[8]),
 	PSC_DEV(162, &soc_lpsc_list[9]),
 	PSC_DEV(75, &soc_lpsc_list[10]),
+	PSC_DEV(36, &soc_lpsc_list[11]),
 	PSC_DEV(102, &soc_lpsc_list[11]),
 	PSC_DEV(146, &soc_lpsc_list[11]),
 	PSC_DEV(13, &soc_lpsc_list[12]),
Signature · 1 line
2.40.0
#4 lore raw

PATCH v2 3/3 arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

In reply to Nishanth Menon

Update the am62 and am625 device-trees from linux v6.3-rc5 This needed the followin tweaks to the u-boot specific dtsi as well:
- Switch tick-timer to the main_timer as it's now defined in the main dtsi
- Secure proxies are defined in Soc dtsis
- Drop duplicate nodes - u-boot.dtsi is includes in r5-sk, no need for either the definitions from main.dtsi OR duplication from u-boot.dtsi

Cc Francesco Dolcini <[email protected]>
Cc Sjoerd Simons <[email protected]>
Cc Wadim Egorov <[email protected]>

---
Changes Since V1:
* Dependency on:
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
* Dropped the pinctrl hack and reg hacks on cpsw

V1: https://lore.kernel.org/all/[email protected]/

 arch/arm/dts/k3-am62-main.dtsi       | 389 +++++++++++++++++++++++--
 arch/arm/dts/k3-am62-mcu.dtsi        |  66 +++++
 arch/arm/dts/k3-am62-thermal.dtsi    |  33 +++
 arch/arm/dts/k3-am62-wakeup.dtsi     |  33 ++-
 arch/arm/dts/k3-am62.dtsi            |  11 +-
 arch/arm/dts/k3-am625-r5-sk.dts      |  92 +-----
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |  33 +--
 arch/arm/dts/k3-am625-sk.dts         | 286 ++-----------------
 arch/arm/dts/k3-am625.dtsi           |  54 +++-
 arch/arm/dts/k3-am62x-sk-common.dtsi | 412 +++++++++++++++++++++++++++
 arch/arm/dts/k3-pinctrl.h            |  53 ++++
 11 files changed, 1064 insertions(+), 398 deletions(-)
 create mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
 create mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
 create mode 100644 arch/arm/dts/k3-pinctrl.h
arch/arm/dts/k3-am62-main.dtsi +359 -30
index 4a42f1b2e314..2488e3a537fe 100644
@@ -54,6 +54,12 @@
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
 		};
+
+		epwm_tbclk: clock@4130 {
+			compatible = "ti,am62-epwm-tbclk", "syscon";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
 	};
 
 	dmss: bus@48000000 {
@@ -144,8 +150,8 @@
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
-		mboxes= <&secure_proxy_main 12>,
-			<&secure_proxy_main 13>;
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
 		reg-names = "debug_messages";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
 
@@ -178,6 +184,21 @@
 		dma-names = "tx", "rx1", "rx2";
 	};
 
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
 	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2ac>;
@@ -186,6 +207,108 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am64-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -193,6 +316,7 @@
 		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 146 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart1: serial@2810000 {
@@ -202,6 +326,7 @@
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 152 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart2: serial@2820000 {
@@ -211,6 +336,7 @@
 		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 153 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart3: serial@2830000 {
@@ -220,6 +346,7 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 154 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart4: serial@2840000 {
@@ -229,6 +356,7 @@
 		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 155 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart5: serial@2850000 {
@@ -238,6 +366,7 @@
 		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 156 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_uart6: serial@2860000 {
@@ -247,6 +376,7 @@
 		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 158 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	main_i2c0: i2c@20000000 {
@@ -258,6 +388,7 @@
 		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 102 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c1: i2c@20010000 {
@@ -269,6 +400,7 @@
 		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 103 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@20020000 {
@@ -280,6 +412,7 @@
 		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 104 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@20030000 {
@@ -291,6 +424,7 @@
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 2>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi@20100000 {
@@ -300,7 +434,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 172 0>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
 	};
 
 	main_spi1: spi@20110000 {
@@ -310,7 +445,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 173 0>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
 	};
 
 	main_spi2: spi@20120000 {
@@ -320,7 +456,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
-		clocks = <&k3_clks 174 0>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
 	};
 
 	main_gpio_intr: interrupt-controller@a00000 {
@@ -345,7 +482,7 @@
 			     <193>, <194>, <195>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <87>;
+		ti,ngpio = <92>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 77 0>;
@@ -362,7 +499,7 @@
 			     <183>, <184>, <185>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		ti,ngpio = <88>;
+		ti,ngpio = <52>;
 		ti,davinci-gpio-unbanked = <0>;
 		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 78 0>;
@@ -385,8 +522,11 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
-		ti,otap-del-sel-ddr52 = <0x9>;
-		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -397,19 +537,20 @@
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
 		bus-width = <4>;
+		status = "disabled";
 	};
 
 	sdhci2: mmc@fa20000 {
@@ -420,18 +561,65 @@
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
-		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
-		ti,otap-del-sel-sdr12 = <0xf>;
-		ti,otap-del-sel-sdr25 = <0xf>;
-		ti,otap-del-sel-sdr50 = <0xc>;
-		ti,otap-del-sel-sdr104 = <0x6>;
-		ti,otap-del-sel-ddr50 = <0x9>;
-		ti,itap-del-sel-legacy = <0x0>;
-		ti,itap-del-sel-sd-hs = <0x0>;
-		ti,itap-del-sel-sdr12 = <0x0>;
-		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0xa>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg =<0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg =<0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
 	};
 
 	fss: bus@fc00000 {
@@ -456,6 +644,7 @@
 			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 
@@ -514,12 +703,13 @@
 			clocks = <&k3_clks 13 0>;
 			clock-names = "fck";
 			bus_freq = <1000000>;
+			status = "disabled";
 		};
 
 		cpts@3d000 {
 			compatible = "ti,j721e-cpts";
 			reg = <0x00 0x3d000 0x00 0x400>;
-			clocks = <&k3_clks 13 1>;
+			clocks = <&k3_clks 13 3>;
 			clock-names = "cpts";
 			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cpts";
@@ -551,6 +741,7 @@
 		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 51 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap1: pwm@23110000 {
@@ -560,6 +751,7 @@
 		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 52 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	ecap2: pwm@23120000 {
@@ -569,6 +761,7 @@
 		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 53 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -583,5 +776,141 @@
 			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 };
arch/arm/dts/k3-am62-mcu.dtsi +66 -0

100 lines not on this page · raw message

arch/arm/dts/k3-am62-thermal.dtsi new file +33 -0
new file mode 100644
index 000000000000..a358757e26f0
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
arch/arm/dts/k3-am62-wakeup.dtsi +32 -1
index 4090134676cf..eae052887186 100644
@@ -26,16 +26,47 @@
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "fclk";
+		status = "disabled";
 	};
 
 	wkup_i2c0: i2c@2b200000 {
 		compatible = "ti,am64-i2c", "ti,omap4-i2c";
-		reg = <0x00 0x02b200000 0x00 0x100>;
+		reg = <0x00 0x2b200000 0x00 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
 	};
 };
arch/arm/dts/k3-am62.dtsi +8 -3
index 37fcbe7a3c33..5e72c445f37a 100644
@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM625 SoC";
 	compatible = "ti,am625";
@@ -80,6 +81,7 @@
 			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
 
 			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
@@ -90,14 +92,17 @@
 			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
 		};
 
-		cbass_wakeup: bus@2b000000 {
+		cbass_wakeup: bus@b00000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
 				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 		};
 	};
+
+	#include "k3-am62-thermal.dtsi"
 };
 
 /* Now include the peripherals for each bus segments */
arch/arm/dts/k3-am625-r5-sk.dts +15 -77

133 lines not on this page · raw message

arch/arm/dts/k3-am625-sk-u-boot.dtsi +6 -27
index a60c37f1dbf0..c1685bc9ca39 100644
@@ -9,7 +9,7 @@
 / {
 	chosen {
 		stdout-path = "serial2:115200n8";
-		tick-timer = &timer1;
+		tick-timer = &main_timer0;
 	};
 
 	aliases {
@@ -21,16 +21,13 @@
 	};
 };
 
-&cbass_main{
+&cbass_main {
 	bootph-pre-ram;
+};
 
-	timer1: timer@2400000 {
-		compatible = "ti,omap5430-timer";
-		reg = <0x00 0x2400000 0x00 0x80>;
-		ti,timer-alwon;
-		clock-frequency = <25000000>;
-		bootph-pre-ram;
-	};
+&main_timer0 {
+	clock-frequency = <25000000>;
+	bootph-pre-ram;
 };
 
 &dmss {
@@ -77,10 +74,6 @@
 	bootph-pre-ram;
 };
 
-&main_uart1 {
-	bootph-pre-ram;
-};
-
 &cbass_mcu {
 	bootph-pre-ram;
 };
@@ -93,10 +86,6 @@
 	bootph-pre-ram;
 };
 
-&wkup_uart0 {
-	bootph-pre-ram;
-};
-
 &sdhci1 {
 	bootph-pre-ram;
 };
@@ -130,17 +119,7 @@
 };
 
 &cpsw3g {
-	reg = <0x0 0x8000000 0x0 0x200000>,
-	      <0x0 0x43000200 0x0 0x8>;
-	reg-names = "cpsw_nuss", "mac_efuse";
-	/delete-property/ ranges;
 	bootph-pre-ram;
-
-	cpsw-phy-sel@04044 {
-		compatible = "ti,am64-phy-gmii-sel";
-		reg = <0x0 0x00104044 0x0 0x8>;
-		bootph-pre-ram;
-	};
 };
 
 &cpsw_port1 {
arch/arm/dts/k3-am625-sk.dts +27 -259

371 lines not on this page · raw message

arch/arm/dts/k3-am625.dtsi +53 -1

84 lines not on this page · raw message

arch/arm/dts/k3-am62x-sk-common.dtsi new file +412 -0

412 lines not on this page · raw message

arch/arm/dts/k3-pinctrl.h new file +53 -0

53 lines not on this page · raw message

Signature · 1 line
2.40.0
#5 lore raw

Re: [PATCH V2 3/3] arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

Quoted 1 line · Nishanth Menon

Update the am62 and am625 device-trees from linux v6.3-rc5 This needed the followin

Bit of a typo in there :( s/v6.3-rc5/v6.5-rc1 and s/followin/following

I can respin if there are additional comments or if Tom is ok to do a local fixup..

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
Reviewed-by on the v2 series
#6 lore raw
In reply to Nishanth Menon
Quoted 58 lines · Nishanth Menon

I have picked up part of Sjoerd's series[1] to keep it constrained just to dts sync at this point rather than adding newer functionality on top.

You can find the full series in [2].

Attempting am625 as a start of a series of clean ups for device tree for u-boot, but will love to get any review comments to improve this series up.

This series also depends on:
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]

baseline:
master 197aa22e6506 Merge branch 'master' of git://git.denx.de/u-boot-coldfire

Boot log: https://gist.github.com/nmenon/a1705c385189c2367d8cad1debcf8155

Changes since V1:
* Added dependency on CPSW cleanup patches.
* Dropped the hack done in u-boot.dtsi to use kernel dts as is for cpsw

V1: https://lore.kernel.org/all/[email protected]/

Changes since RFC:
* dependencies are all merged on master now.
* No new dependencies in this series, though the issue with uboot dtb not working for kernel is not a regression, it should probably be handled as a fixup part of RC Cycle.

RFC: https://lore.kernel.org/u-boot/[email protected]/

Nishanth Menon (1):
arm: dts: k3-am62: Bump dtsi from linux v6.5-rc1

Sjoerd Simons (2):
omap: timer: add ti,am654-timer compatibility
arm: mach-k3: am62: Add timer0 id to the dev list

 arch/arm/dts/k3-am62-main.dtsi       | 389 +++++++++++++++++++++++--
 arch/arm/dts/k3-am62-mcu.dtsi        |  66 +++++
 arch/arm/dts/k3-am62-thermal.dtsi    |  33 +++
 arch/arm/dts/k3-am62-wakeup.dtsi     |  33 ++-
 arch/arm/dts/k3-am62.dtsi            |  11 +-
 arch/arm/dts/k3-am625-r5-sk.dts      |  92 +-----
 arch/arm/dts/k3-am625-sk-u-boot.dtsi |  33 +--
 arch/arm/dts/k3-am625-sk.dts         | 286 ++-----------------
 arch/arm/dts/k3-am625.dtsi           |  54 +++-
 arch/arm/dts/k3-am62x-sk-common.dtsi | 412 +++++++++++++++++++++++++++
 arch/arm/dts/k3-pinctrl.h            |  53 ++++
 arch/arm/mach-k3/am62x/dev-data.c    |   1 +
 drivers/timer/omap-timer.c           |   1 +
 13 files changed, 1066 insertions(+), 398 deletions(-)
 create mode 100644 arch/arm/dts/k3-am62-thermal.dtsi
 create mode 100644 arch/arm/dts/k3-am62x-sk-common.dtsi
 create mode 100644 arch/arm/dts/k3-pinctrl.h
Quoted 2 lines

[1] https://lore.kernel.org/all/[email protected]/
[2] https://github.com/nmenon/fix-k3-dt-u-boot/commits/fdt-fixup-s1-am625-rev3.2

For this series: