selftests: openvswitch: add flow programming cases
Subsystems (4)
Aaron Conole
maintainerv2 cover selftests: openvswitch: add flow programming cases
The openvswitch selftests currently contain a few cases for managing the datapath, which includes creating datapath instances, adding interfaces, and doing some basic feature / upcall tests. This is useful to validate the control path.
Add the ability to program some of the more common flows with actions. This can be improved overtime to include regression testing, etc.
Changes from original:
1. Fix issue when parsing ipv6 in the NAT action
2. Fix issue calculating length during ctact parsing
3. Fix error message when invalid bridge is passed
4. Fold in Adrian's patch to support key masks
Aaron Conole (4):
selftests: openvswitch: add an initial flow programming case
selftests: openvswitch: add a test for ipv4 forwarding
selftests: openvswitch: add basic ct test case parsing
selftests: openvswitch: add ct-nat test case with ipv4
Adrian Moreno (1):
selftests: openvswitch: support key masks
.../selftests/net/openvswitch/openvswitch.sh | 223 +++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 601 +++++++++++++++++- 2 files changed, 800 insertions(+), 24 deletions(-)
Signature · 1 line
2.40.1
Aaron Conole
maintainerPATCH v2 1/5 selftests: openvswitch: add an initial flow programming case
The openvswitch self-tests can test much of the control side of the module (ie: what a vswitchd implementation would process), but the actual packet forwarding cases aren't supported, making the testing of limited value.
Add some flow parsing and an initial ARP based test case using arping utility. This lets us display flows, add some basic output flows with simple matches, and test against a known good forwarding case.
---
NOTE: 3 lines flag the line-length checkpatch warning, but there didn't
seem to bea good way of breaking the lines smaller for 2 of them. The third would still flag, even if broken at what looks like a good point to break it.
.../selftests/net/openvswitch/openvswitch.sh | 51 +++ .../selftests/net/openvswitch/ovs-dpctl.py | 407 ++++++++++++++++++ 2 files changed, 458 insertions(+)
tools/testing/selftests/net/openvswitch/openvswitch.sh +51 -0
@@ -11,6 +11,7 @@ VERBOSE=0 TRACING=0 tests=" + arp_ping eth-arp: Basic arp ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"
@@ -127,6 +128,16 @@ ovs_add_netns_and_veths () { return 0 } +ovs_add_flow () { + info "Adding flow to DP: sbx:$1 br:$2 flow:$3 act:$4" + ovs_sbx "$1" python3 $ovs_base/ovs-dpctl.py add-flow "$2" "$3" "$4" + if [ $? -ne 0 ]; then + echo "Flow [ $3 : $4 ] failed" >> ${ovs_dir}/debug.log + return 1 + fi + return 0 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..."
@@ -141,6 +152,46 @@ usage() { exit 1 } +# arp_ping test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - send ARP ping between two ns +test_arp_ping () { + + which arping >/dev/null 2>&1 || return $ksft_skip + + sbx_add "test_arp_ping" || return $? + + ovs_add_dp "test_arp_ping" arpping || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_arp_ping" "arpping" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + # Setup client namespace + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + HW_CLIENT=`ip netns exec client ip link show dev c1 | grep -E 'link/ether [0-9a-f:]+' | awk '{print $2;}'` + info "Client hwaddr: $HW_CLIENT" + + # Setup server namespace + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + HW_SERVER=`ip netns exec server ip link show dev s1 | grep -E 'link/ether [0-9a-f:]+' | awk '{print $2;}'` + info "Server hwaddr: $HW_SERVER" + + ovs_add_flow "test_arp_ping" arpping \ + "in_port(1),eth(),eth_type(0x0806),arp(sip=172.31.110.10,tip=172.31.110.20,sha=$HW_CLIENT,tha=ff:ff:ff:ff:ff:ff)" '2' || return 1 + ovs_add_flow "test_arp_ping" arpping \ + "in_port(2),eth(),eth_type(0x0806),arp()" '1' || return 1 + + ovs_sbx "test_arp_ping" ip netns exec client arping -I c1 172.31.110.20 -c 1 || return 1 + + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulation
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +407 -0
469 lines not on this page · raw message
Signature · 1 line
2.40.1
Re: [ovs-dev] [PATCH v2 net-next 1/5] selftests: openvswitch: add an initial flow programming case
Quoted 11 lines · Aaron Conole
The openvswitch self-tests can test much of the control side of the module (ie: what a vswitchd implementation would process), but the actual packet forwarding cases aren't supported, making the testing of limited value.
Add some flow parsing and an initial ARP based test case using arping utility. This lets us display flows, add some basic output flows with simple matches, and test against a known good forwarding case.
Signed-off-by Aaron Conole <[email protected]>
Quoted 568 lines
---
NOTE: 3 lines flag the line-length checkpatch warning, but there didn't
seem to bea good way of breaking the lines smaller for 2 of them. The third would still flag, even if broken at what looks like a good point to break it..../selftests/net/openvswitch/openvswitch.sh | 51 +++ .../selftests/net/openvswitch/ovs-dpctl.py | 407 ++++++++++++++++++ 2 files changed, 458 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +51
-0@@ -11,6 +11,7 @@ VERBOSE=0 TRACING=0 tests=" + arp_ping eth-arp: Basic arp ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"@@ -127,6 +128,16 @@ ovs_add_netns_and_veths () { return 0 } +ovs_add_flow () { + info "Adding flow to DP: sbx:$1 br:$2 flow:$3 act:$4" + ovs_sbx "$1" python3 $ovs_base/ovs-dpctl.py add-flow "$2" "$3" "$4" + if [ $? -ne 0 ]; then + echo "Flow [ $3 : $4 ] failed" >> ${ovs_dir}/debug.log + return 1 + fi + return 0 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..."@@ -141,6 +152,46 @@ usage() { exit 1 } +# arp_ping test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - send ARP ping between two ns +test_arp_ping () { + + which arping >/dev/null 2>&1 || return $ksft_skip + + sbx_add "test_arp_ping" || return $? + + ovs_add_dp "test_arp_ping" arpping || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_arp_ping" "arpping" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + # Setup client namespace + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + HW_CLIENT=`ip netns exec client ip link show dev c1 | grep -E 'link/ether [0-9a-f:]+' | awk '{print $2;}'` + info "Client hwaddr: $HW_CLIENT" + + # Setup server namespace + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + HW_SERVER=`ip netns exec server ip link show dev s1 | grep -E 'link/ether [0-9a-f:]+' | awk '{print $2;}'` + info "Server hwaddr: $HW_SERVER" + + ovs_add_flow "test_arp_ping" arpping \ + "in_port(1),eth(),eth_type(0x0806),arp(sip=172.31.110.10,tip=172.31.110.20,sha=$HW_CLIENT,tha=ff:ff:ff:ff:ff:ff)" '2' || return 1 + ovs_add_flow "test_arp_ping" arpping \ + "in_port(2),eth(),eth_type(0x0806),arp()" '1' || return 1 + + ovs_sbx "test_arp_ping" ip netns exec client arping -I c1 172.31.110.20 -c 1 || return 1 + + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulationtools/testing/selftests/net/openvswitch/ovs-dpctl.py +407
-0@@ -9,9 +9,12 @@ import errno import ipaddress import logging import multiprocessing +import re import struct import sys import time +import types +import uuid try: from pyroute2 import NDB@@ -59,6 +62,104 @@ def macstr(mac): return outstr +def strspn(str1, str2): + tot = 0 + for char in str1: + if str2.find(char) == -1: + return tot + tot += 1 + return tot + + +def intparse(statestr, defmask="0xffffffff"): + totalparse = strspn(statestr, "0123456789abcdefABCDEFx/") + # scan until "/" + count = strspn(statestr, "x0123456789abcdefABCDEF") + + firstnum = statestr[:count] + if firstnum[-1] == "/": + firstnum = firstnum[:-1] + k = int(firstnum, 0) + + m = None + if defmask is not None: + secondnum = defmask + if statestr[count] == "/": + secondnum = statestr[count + 1 :] # this is wrong... + m = int(secondnum, 0) + + return statestr[totalparse + 1 :], k, m + + +def parse_flags(flag_str, flag_vals): + bitResult = 0 + maskResult = 0 + + if len(flag_str) == 0: + return flag_str, bitResult, maskResult + + if flag_str[0].isdigit(): + idx = 0 + while flag_str[idx].isdigit() or flag_str[idx] == "x": + idx += 1 + digits = flag_str[:idx] + flag_str = flag_str[idx:] + + bitResult = int(digits, 0) + maskResult = int(digits, 0) + + while len(flag_str) > 0 and (flag_str[0] == "+" or flag_str[0] == "-"): + if flag_str[0] == "+": + setFlag = True + elif flag_str[0] == "-": + setFlag = False + + flag_str = flag_str[1:] + + flag_len = 0 + while ( + flag_str[flag_len] != "+" + and flag_str[flag_len] != "-" + and flag_str[flag_len] != "," + and flag_str[flag_len] != ")" + ): + flag_len += 1 + + flag = flag_str[0:flag_len] + + if flag in flag_vals: + if maskResult & flag_vals[flag]: + raise KeyError( + "Flag %s set once, cannot be set in multiples" % flag + ) + + if setFlag: + bitResult |= flag_vals[flag] + + maskResult |= flag_vals[flag] + else: + raise KeyError("Missing flag value: %s" % flag) + + flag_str = flag_str[flag_len:] + + return flag_str, bitResult, maskResult + + +def parse_ct_state(statestr): + ct_flags = { + "new": 1 << 0, + "est": 1 << 1, + "rel": 1 << 2, + "rpl": 1 << 3, + "inv": 1 << 4, + "trk": 1 << 5, + "snat": 1 << 6, + "dnat": 1 << 7, + } + + return parse_flags(statestr, ct_flags) + + def convert_mac(mac_str, mask=False): if mac_str is None or mac_str == "": mac_str = "00:00:00:00:00:00"@@ -79,6 +180,62 @@ def convert_ipv4(ip, mask=False): return int(ipaddress.IPv4Address(ip)) +def parse_starts_block(block_str, scanstr, returnskipped, scanregex=False): + if scanregex: + m = re.search(scanstr, block_str) + if m is None: + if returnskipped: + return block_str + return False + if returnskipped: + block_str = block_str[len(m.group(0)) :] + return block_str + return True + + if block_str.startswith(scanstr): + if returnskipped: + block_str = block_str[len(scanstr) :] + else: + return True + + if returnskipped: + return block_str + + return False + + +def parse_extract_field( + block_str, fieldstr, scanfmt, convert, masked=False, defval=None +): + if fieldstr and not block_str.startswith(fieldstr): + return block_str, defval + + if fieldstr: + str_skiplen = len(fieldstr) + str_skipped = block_str[str_skiplen:] + if str_skiplen == 0: + return str_skipped, defval + else: + str_skiplen = 0 + str_skipped = block_str + + m = re.search(scanfmt, str_skipped) + if m is None: + raise ValueError("Bad fmt string") + + data = m.group(0) + if convert: + data = convert(m.group(0)) + + str_skipped = str_skipped[len(m.group(0)) :] + if masked: + if str_skipped[0] == "/": + raise ValueError("Masking support TBD...") + + str_skipped = str_skipped[strspn(str_skipped, ", ") :] + return str_skipped, data + + class ovs_dp_msg(genlmsg): # include the OVS version # We need a custom header rather than just being able to rely on@@ -278,6 +435,50 @@ class ovsactions(nla): return print_str + def parse(self, actstr): + while len(actstr) != 0: + parsed = False + if actstr.startswith("drop"): + # for now, drops have no explicit action, so we + # don't need to set any attributes. The final + # act of the processing chain will just drop the packet + return + + elif parse_starts_block(actstr, "^(\d+)", False, True): + actstr, output = parse_extract_field( + actstr, None, "(\d+)", lambda x: int(x), False, "0" + ) + self["attrs"].append(["OVS_ACTION_ATTR_OUTPUT", output]) + parsed = True + elif parse_starts_block(actstr, "recirc(", False): + actstr, recircid = parse_extract_field( + actstr, + "recirc(", + "([0-9a-fA-Fx]+)", + lambda x: int(x, 0), + False, + 0, + ) + self["attrs"].append(["OVS_ACTION_ATTR_RECIRC", recircid]) + parsed = True + + parse_flat_map = ( + ("ct_clear", "OVS_ACTION_ATTR_CT_CLEAR"), + ("pop_vlan", "OVS_ACTION_ATTR_POP_VLAN"), + ("pop_eth", "OVS_ACTION_ATTR_POP_ETH"), + ("pop_nsh", "OVS_ACTION_ATTR_POP_NSH"), + ) + + for flat_act in parse_flat_map: + if parse_starts_block(actstr, flat_act[0], False): + actstr += len(flat_act[0]) + self["attrs"].append([flat_act[1]]) + actstr = actstr[strspn(actstr, ", ") :] + parsed = True + + if not parsed: + raise ValueError("Action str: '%s' not supported" % actstr) + class ovskey(nla): nla_flags = NLA_F_NESTED@@ -347,6 +548,53 @@ class ovskey(nla): init=init, ) + def parse(self, flowstr, typeInst): + if not flowstr.startswith(self.proto_str): + return None, None + + k = typeInst() + m = typeInst() + + flowstr = flowstr[len(self.proto_str) :] + if flowstr.startswith("("): + flowstr = flowstr[1:] + + keybits = b"" + maskbits = b"" + for f in self.fields_map: + if flowstr.startswith(f[1]): + # the following assumes that the field looks + # something like 'field.' where '.' is a + # character that we don't exactly care about. + flowstr = flowstr[len(f[1]) + 1 :] + splitchar = 0 + for c in flowstr: + if c == "," or c == ")": + break + splitchar += 1 + data = flowstr[:splitchar] + flowstr = flowstr[splitchar:] + else: + data = None + + if len(f) > 4: + func = f[4] + else: + func = f[3] + k[f[0]] = func(data) + if len(f) > 4: + m[f[0]] = func(data, True) + else: + m[f[0]] = func(data) + + flowstr = flowstr[strspn(flowstr, ", ") :] + if len(flowstr) == 0: + return flowstr, k, m + + flowstr = flowstr[strspn(flowstr, "), ") :] + + return flowstr, k, m + def dpstr(self, masked=None, more=False): outstr = self.proto_str + "(" first = False@@ -810,6 +1058,71 @@ class ovskey(nla): class ovs_key_mpls(nla): fields = (("lse", ">I"),) + def parse(self, flowstr, mask=None): + for field in ( + ("OVS_KEY_ATTR_PRIORITY", "skb_priority", intparse), + ("OVS_KEY_ATTR_SKB_MARK", "skb_mark", intparse), + ("OVS_KEY_ATTR_RECIRC_ID", "recirc_id", intparse), + ("OVS_KEY_ATTR_DP_HASH", "dp_hash", intparse), + ("OVS_KEY_ATTR_CT_STATE", "ct_state", parse_ct_state), + ("OVS_KEY_ATTR_CT_ZONE", "ct_zone", intparse), + ("OVS_KEY_ATTR_CT_MARK", "ct_mark", intparse), + ("OVS_KEY_ATTR_IN_PORT", "in_port", intparse), + ( + "OVS_KEY_ATTR_ETHERNET", + "eth", + ovskey.ethaddr, + ), + ( + "OVS_KEY_ATTR_ETHERTYPE", + "eth_type", + lambda x: intparse(x, "0xffff"), + ), + ( + "OVS_KEY_ATTR_IPV4", + "ipv4", + ovskey.ovs_key_ipv4, + ), + ( + "OVS_KEY_ATTR_IPV6", + "ipv6", + ovskey.ovs_key_ipv6, + ), + ( + "OVS_KEY_ATTR_ARP", + "arp", + ovskey.ovs_key_arp, + ), + ( + "OVS_KEY_ATTR_TCP", + "tcp", + ovskey.ovs_key_tcp, + ), + ( + "OVS_KEY_ATTR_TCP_FLAGS", + "tcp_flags", + lambda x: parse_flags(x, None), + ), + ): + fld = field[1] + "(" + if not flowstr.startswith(fld): + continue + + if not isinstance(field[2], types.FunctionType): + nk = field[2]() + flowstr, k, m = nk.parse(flowstr, field[2]) + else: + flowstr = flowstr[len(fld) :] + flowstr, k, m = field[2](flowstr) + + if m and mask is not None: + mask["attrs"].append([field[0], m]) + self["attrs"].append([field[0], k]) + + flowstr = flowstr[strspn(flowstr, "),") :] + + return flowstr + def dpstr(self, mask=None, more=False): print_str = ""@@ -1358,11 +1671,92 @@ class OvsFlow(GenericNetlinkSocket): return print_str + def parse(self, flowstr, actstr, dpidx=0): + OVS_UFID_F_OMIT_KEY = 1 << 0 + OVS_UFID_F_OMIT_MASK = 1 << 1 + OVS_UFID_F_OMIT_ACTIONS = 1 << 2 + + self["cmd"] = 0 + self["version"] = 0 + self["reserved"] = 0 + self["dpifindex"] = 0 + + if flowstr.startswith("ufid:"): + count = 5 + while flowstr[count] != ",": + count += 1 + ufidstr = flowstr[5:count] + flowstr = flowstr[count + 1 :] + else: + ufidstr = str(uuid.uuid4()) + uuidRawObj = uuid.UUID(ufidstr).fields + + self["attrs"].append( + [ + "OVS_FLOW_ATTR_UFID", + [ + uuidRawObj[0], + uuidRawObj[1] << 16 | uuidRawObj[2], + uuidRawObj[3] << 24 + | uuidRawObj[4] << 16 + | uuidRawObj[5] & (0xFF << 32) >> 32, + uuidRawObj[5] & (0xFFFFFFFF), + ], + ] + ) + self["attrs"].append( + [ + "OVS_FLOW_ATTR_UFID_FLAGS", + int( + OVS_UFID_F_OMIT_KEY + | OVS_UFID_F_OMIT_MASK + | OVS_UFID_F_OMIT_ACTIONS + ), + ] + ) + + k = ovskey() + m = ovskey() + k.parse(flowstr, m) + self["attrs"].append(["OVS_FLOW_ATTR_KEY", k]) + self["attrs"].append(["OVS_FLOW_ATTR_MASK", m]) + + a = ovsactions() + a.parse(actstr) + self["attrs"].append(["OVS_FLOW_ATTR_ACTIONS", a]) + def __init__(self): GenericNetlinkSocket.__init__(self) self.bind(OVS_FLOW_FAMILY, OvsFlow.ovs_flow_msg) + def add_flow(self, dpifindex, flowmsg): + """ + Send a new flow message to the kernel. + + dpifindex should be a valid datapath obtained by calling + into the OvsDatapath lookup + + flowmsg is a flow object obtained by calling a dpparse + """ + + flowmsg["cmd"] = OVS_FLOW_CMD_NEW + flowmsg["version"] = OVS_DATAPATH_VERSION + flowmsg["reserved"] = 0 + flowmsg["dpifindex"] = dpifindex + + try: + reply = self.nlm_request( + flowmsg, + msg_type=self.prid, + msg_flags=NLM_F_REQUEST | NLM_F_ACK, + ) + reply = reply[0] + except NetlinkError as ne: + print(flowmsg) + raise ne + return reply + def dump(self, dpifindex, flowspec=None): """ Returns a list of messages containing flows.@@ -1514,6 +1908,11 @@ def main(argv): dumpflcmd = subparsers.add_parser("dump-flows") dumpflcmd.add_argument("dumpdp", help="Datapath Name") + addflcmd = subparsers.add_parser("add-flow") + addflcmd.add_argument("flbr", help="Datapath name") + addflcmd.add_argument("flow", help="Flow specification") + addflcmd.add_argument("acts", help="Flow actions") + args = parser.parse_args() if args.verbose > 0:@@ -1589,6 +1988,14 @@ def main(argv): rep = ovsflow.dump(rep["dpifindex"]) for flow in rep: print(flow.dpstr(True if args.verbose > 0 else False)) + elif hasattr(args, "flbr"): + rep = ovsdp.info(args.flbr, 0) + if rep is None: + print("DP '%s' not found." % args.flbr) + return 1 + flow = OvsFlow.ovs_flow_msg() + flow.parse(args.flow, args.acts, rep["dpifindex"]) + ovsflow.add_flow(rep["dpifindex"], flow) return 0
Signature · 1 line
Adrián Moreno
Aaron Conole
maintainerPATCH v2 2/5 selftests: openvswitch: support key masks
In reply to Aaron ConoleFrom: Adrian Moreno <[email protected]>
From: Adrian Moreno <[email protected]>
The default value for the mask actually depends on the value (e.g: if the value is non-null, the default is full-mask), so change the convert functions to accept the full, possibly masked string and let them figure out how to parse the differnt values.
Also, implement size-aware int parsing.
With this patch we can now express flows such as the following:
"eth(src=0a:ca:fe:ca:fe:0a/ff:ff:00:00:ff:00)" "eth(src=0a:ca:fe:ca:fe:0a)" -> mask = ff:ff:ff:ff:ff:ff "ipv4(src=192.168.1.1)" -> mask = 255.255.255.255 "ipv4(src=192.168.1.1/24)" "ipv4(src=192.168.1.1/255.255.255.0)"
"tcp(src=8080)" -> mask = 0xffff "tcp(src=8080/0xf0f0)"
--- .../selftests/net/openvswitch/ovs-dpctl.py | 96 ++++++++++++------- 1 file changed, 64 insertions(+), 32 deletions(-)
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +64 -32
@@ -160,25 +160,45 @@ def parse_ct_state(statestr): return parse_flags(statestr, ct_flags) -def convert_mac(mac_str, mask=False): - if mac_str is None or mac_str == "": - mac_str = "00:00:00:00:00:00" - if mask is True and mac_str != "00:00:00:00:00:00": - mac_str = "FF:FF:FF:FF:FF:FF" - mac_split = mac_str.split(":") - ret = bytearray([int(i, 16) for i in mac_split]) - return bytes(ret) +def convert_mac(data): + def to_bytes(mac): + mac_split = mac.split(":") + ret = bytearray([int(i, 16) for i in mac_split]) + return bytes(ret) + mac_str, _, mask_str = data.partition('/') -def convert_ipv4(ip, mask=False): - if ip is None: - ip = 0 - if mask is True: - if ip != 0: - ip = int(ipaddress.IPv4Address(ip)) & 0xFFFFFFFF + if not mac_str: + mac_str = mask_str = "00:00:00:00:00:00" + elif not mask_str: + mask_str = "FF:FF:FF:FF:FF:FF" - return int(ipaddress.IPv4Address(ip)) + return to_bytes(mac_str), to_bytes(mask_str) +def convert_ipv4(data): + ip, _, mask = data.partition('/') + + if not ip: + ip = mask = 0 + elif not mask: + mask = 0xFFFFFFFF + elif mask.isdigit(): + mask = (0xFFFFFFFF << (32 - int(mask))) & 0xFFFFFFFF + + return int(ipaddress.IPv4Address(ip)), int(ipaddress.IPv4Address(mask)) + +def convert_int(size): + def convert_int_sized(data): + value, _, mask = data.partition('/') + + if not value: + return 0, 0 + elif not mask: + return int(value, 0), pow(2, size) - 1 + else: + return int(value, 0), int(mask, 0) + + return convert_int_sized def parse_starts_block(block_str, scanstr, returnskipped, scanregex=False): if scanregex:
@@ -525,8 +545,10 @@ class ovskey(nla): ) fields_map = ( - ("src", "src", "%d", lambda x: int(x) if x is not None else 0), - ("dst", "dst", "%d", lambda x: int(x) if x is not None else 0), + ("src", "src", "%d", lambda x: int(x) if x else 0, + convert_int(16)), + ("dst", "dst", "%d", lambda x: int(x) if x else 0, + convert_int(16)), ) def __init__(
@@ -575,17 +597,13 @@ class ovskey(nla): data = flowstr[:splitchar] flowstr = flowstr[splitchar:] else: - data = None + data = "" if len(f) > 4: - func = f[4] - else: - func = f[3] - k[f[0]] = func(data) - if len(f) > 4: - m[f[0]] = func(data, True) + k[f[0]], m[f[0]] = f[4](data) else: - m[f[0]] = func(data) + k[f[0]] = f[3](data) + m[f[0]] = f[3](data) flowstr = flowstr[strspn(flowstr, ", ") :] if len(flowstr) == 0:
@@ -689,10 +707,14 @@ class ovskey(nla): int, convert_ipv4, ), - ("proto", "proto", "%d", lambda x: int(x) if x is not None else 0), - ("tos", "tos", "%d", lambda x: int(x) if x is not None else 0), - ("ttl", "ttl", "%d", lambda x: int(x) if x is not None else 0), - ("frag", "frag", "%d", lambda x: int(x) if x is not None else 0), + ("proto", "proto", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("tos", "tos", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("ttl", "ttl", "%d", lambda x: int(x) if x else 0, + convert_int(8)), + ("frag", "frag", "%d", lambda x: int(x) if x else 0, + convert_int(8)), ) def __init__(
@@ -828,8 +850,8 @@ class ovskey(nla): ) fields_map = ( - ("type", "type", "%d", int), - ("code", "code", "%d", int), + ("type", "type", "%d", lambda x: int(x) if x else 0), + ("code", "code", "%d", lambda x: int(x) if x else 0), ) def __init__(
@@ -894,7 +916,7 @@ class ovskey(nla): int, convert_ipv4, ), - ("op", "op", "%d", lambda x: int(x) if x is not None else 0), + ("op", "op", "%d", lambda x: int(x) if x else 0), ( "sha", "sha",
@@ -1098,6 +1120,16 @@ class ovskey(nla): "tcp", ovskey.ovs_key_tcp, ), + ( + "OVS_KEY_ATTR_UDP", + "udp", + ovskey.ovs_key_udp, + ), + ( + "OVS_KEY_ATTR_ICMP", + "icmp", + ovskey.ovs_key_icmp, + ), ( "OVS_KEY_ATTR_TCP_FLAGS", "tcp_flags",
Signature · 1 line
2.40.1
Simon Horman
reviewerRe: [ovs-dev] [PATCH v2 net-next 2/5] selftests: openvswitch: support key masks
Quoted 8 lines · Aaron Conole
From: Adrian Moreno <[email protected]>
From: Adrian Moreno <[email protected]>
The default value for the mask actually depends on the value (e.g: if the value is non-null, the default is full-mask), so change the convert functions to accept the full, possibly masked string and let them figure out how to parse the differnt values.
nit: differnt -> different
Aaron Conole
maintainerPATCH v2 3/5 selftests: openvswitch: add a test for ipv4 forwarding
In reply to Aaron ConoleThis is a simple ipv4 bidirectional connectivity test.
--- .../selftests/net/openvswitch/openvswitch.sh | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)
tools/testing/selftests/net/openvswitch/openvswitch.sh +40 -0
@@ -12,6 +12,7 @@ TRACING=0 tests=" arp_ping eth-arp: Basic arp ping between two NS + connect_v4 ip4-xon: Basic ipv4 ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"
@@ -192,6 +193,45 @@ test_arp_ping () { return 0 } +# connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +test_connect_v4 () { + + sbx_add "test_connect_v4" || return $? + + ovs_add_dp "test_connect_v4" cv4 || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_connect_v4" "cv4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + # Add forwarding for ARP and ip packets - completely wildcarded + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' '2' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(2),eth(),eth_type(0x0800),ipv4(src=172.31.110.20)' '1' || return 1 + + # do a ping + ovs_sbx "test_connect_v4" ip netns exec client ping 172.31.110.20 -c 3 || return 1 + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulation
Signature · 1 line
2.40.1
Re: [ovs-dev] [PATCH v2 net-next 3/5] selftests: openvswitch: add a test for ipv4 forwarding
Quoted 3 lines · Aaron Conole
This is a simple ipv4 bidirectional connectivity test.
Signed-off-by Aaron Conole <[email protected]>
Quoted 62 lines
--- .../selftests/net/openvswitch/openvswitch.sh | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +40
-0@@ -12,6 +12,7 @@ TRACING=0 tests=" arp_ping eth-arp: Basic arp ping between two NS + connect_v4 ip4-xon: Basic ipv4 ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"@@ -192,6 +193,45 @@ test_arp_ping () { return 0 } +# connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +test_connect_v4 () { + + sbx_add "test_connect_v4" || return $? + + ovs_add_dp "test_connect_v4" cv4 || return 1 + + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_connect_v4" "cv4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + # Add forwarding for ARP and ip packets - completely wildcarded + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' '2' || return 1 + ovs_add_flow "test_connect_v4" cv4 \ + 'in_port(2),eth(),eth_type(0x0800),ipv4(src=172.31.110.20)' '1' || return 1 + + # do a ping + ovs_sbx "test_connect_v4" ip netns exec client ping 172.31.110.20 -c 3 || return 1 + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulation
Signature · 1 line
Adrián Moreno
Aaron Conole
maintainerPATCH v2 4/5 selftests: openvswitch: add basic ct test case parsing
In reply to Aaron ConoleForwarding via ct() action is an important use case for openvswitch, but generally would require using a full ovs-vswitchd to get working. Add a ct action parser for basic ct test case.
---
NOTE: 3 lines flag the line-length checkpatch warning, but there didnt
seem to be a really good way of breaking the lines smaller.
.../selftests/net/openvswitch/openvswitch.sh | 68 +++++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++ 2 files changed, 107 insertions(+)
tools/testing/selftests/net/openvswitch/openvswitch.sh +68 -0
@@ -12,6 +12,7 @@ TRACING=0 tests=" arp_ping eth-arp: Basic arp ping between two NS + ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"
@@ -193,6 +194,73 @@ test_arp_ping () { return 0 } +# ct_connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_ct_connect_v4 () { + + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_ct_connect_v4" || return $? + + ovs_add_dp "test_ct_connect_v4" ct4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_ct_connect_v4" "ct4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + # Add forwarding for ARP and ip packets - completely wildcarded + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'ct_state(-trk),eth(),eth_type(0x0800),ipv4()' \ + 'ct(commit),recirc(0x1)' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+new),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ + '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+est),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ + '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+est),in_port(2),eth(),eth_type(0x0800),ipv4(dst=172.31.110.10)' \ + '1' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+inv),eth(),eth_type(0x0800),ipv4()' 'drop' || \ + return 1 + + # do a ping + ovs_sbx "test_ct_connect_v4" ip netns exec client ping 172.31.110.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_ct_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_ct_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "ct connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # connect_v4 test # - client has 1500 byte MTU # - server has 1500 byte MTU
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +39 -0
@@ -62,6 +62,15 @@ def macstr(mac): return outstr +def strcspn(str1, str2): + tot = 0 + for char in str1: + if str2.find(char) != -1: + return tot + tot += 1 + return tot + + def strspn(str1, str2): tot = 0 for char in str1:
@@ -496,6 +505,36 @@ class ovsactions(nla): actstr = actstr[strspn(actstr, ", ") :] parsed = True + if parse_starts_block(actstr, "ct(", False): + actstr = actstr[len("ct(") :] + ctact = ovsactions.ctact() + + for scan in ( + ("commit", "OVS_CT_ATTR_COMMIT", None), + ("force_commit", "OVS_CT_ATTR_FORCE_COMMIT", None), + ("zone", "OVS_CT_ATTR_ZONE", int), + ("mark", "OVS_CT_ATTR_MARK", int), + ("helper", "OVS_CT_ATTR_HELPER", lambda x, y: str(x)), + ("timeout", "OVS_CT_ATTR_TIMEOUT", lambda x, y: str(x)), + ): + if actstr.startswith(scan[0]): + actstr = actstr[len(scan[0]) :] + if scan[2] is not None: + if actstr[0] != "=": + raise ValueError("Invalid ct attr") + actstr = actstr[1:] + pos = strcspn(actstr, ",)") + datum = scan[2](actstr[:pos], 0) + ctact["attrs"].append([scan[1], datum]) + actstr = actstr[pos:] + else: + ctact["attrs"].append([scan[1], None]) + actstr = actstr[strspn(actstr, ", ") :] + + self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) + parsed = True + + actstr = actstr[strspn(actstr, "), ") :] if not parsed: raise ValueError("Action str: '%s' not supported" % actstr)
Signature · 1 line
2.40.1
Re: [ovs-dev] [PATCH v2 net-next 4/5] selftests: openvswitch: add basic ct test case parsing
Quoted 5 lines · Aaron Conole
Forwarding via
ct()action is an important use case for openvswitch, but generally would require using a full ovs-vswitchd to get working. Add a ct action parser for basic ct test case.Signed-off-by Aaron Conole <[email protected]>
Quoted 151 lines
---
NOTE: 3 lines flag the line-length checkpatch warning, but there didnt
seem to be a really good way of breaking the lines smaller..../selftests/net/openvswitch/openvswitch.sh | 68 +++++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 39 +++++++++++ 2 files changed, 107 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +68
-0@@ -12,6 +12,7 @@ TRACING=0 tests=" arp_ping eth-arp: Basic arp ping between two NS + ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"@@ -193,6 +194,73 @@ test_arp_ping () { return 0 } +# ct_connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_ct_connect_v4 () { + + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_ct_connect_v4" || return $? + + ovs_add_dp "test_ct_connect_v4" ct4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_ct_connect_v4" "ct4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + # Add forwarding for ARP and ip packets - completely wildcarded + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'ct_state(-trk),eth(),eth_type(0x0800),ipv4()' \ + 'ct(commit),recirc(0x1)' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+new),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ + '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+est),in_port(1),eth(),eth_type(0x0800),ipv4(src=172.31.110.10)' \ + '2' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+est),in_port(2),eth(),eth_type(0x0800),ipv4(dst=172.31.110.10)' \ + '1' || return 1 + ovs_add_flow "test_ct_connect_v4" ct4 \ + 'recirc_id(0x1),ct_state(+trk+inv),eth(),eth_type(0x0800),ipv4()' 'drop' || \ + return 1 + + # do a ping + ovs_sbx "test_ct_connect_v4" ip netns exec client ping 172.31.110.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_ct_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_ct_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_ct_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "ct connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # connect_v4 test # - client has 1500 byte MTU # - server has 1500 byte MTUtools/testing/selftests/net/openvswitch/ovs-dpctl.py +39
-0@@ -62,6 +62,15 @@ def macstr(mac): return outstr +def strcspn(str1, str2): + tot = 0 + for char in str1: + if str2.find(char) != -1: + return tot + tot += 1 + return tot + + def strspn(str1, str2): tot = 0 for char in str1:@@ -496,6 +505,36 @@ class ovsactions(nla): actstr = actstr[strspn(actstr, ", ") :] parsed = True + if parse_starts_block(actstr, "ct(", False): + actstr = actstr[len("ct(") :] + ctact = ovsactions.ctact() + + for scan in ( + ("commit", "OVS_CT_ATTR_COMMIT", None), + ("force_commit", "OVS_CT_ATTR_FORCE_COMMIT", None), + ("zone", "OVS_CT_ATTR_ZONE", int), + ("mark", "OVS_CT_ATTR_MARK", int), + ("helper", "OVS_CT_ATTR_HELPER", lambda x, y: str(x)), + ("timeout", "OVS_CT_ATTR_TIMEOUT", lambda x, y: str(x)), + ): + if actstr.startswith(scan[0]): + actstr = actstr[len(scan[0]) :] + if scan[2] is not None: + if actstr[0] != "=": + raise ValueError("Invalid ct attr") + actstr = actstr[1:] + pos = strcspn(actstr, ",)") + datum = scan[2](actstr[:pos], 0) + ctact["attrs"].append([scan[1], datum]) + actstr = actstr[pos:] + else: + ctact["attrs"].append([scan[1], None]) + actstr = actstr[strspn(actstr, ", ") :] + + self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) + parsed = True + + actstr = actstr[strspn(actstr, "), ") :] if not parsed: raise ValueError("Action str: '%s' not supported" % actstr)
Signature · 1 line
Adrián Moreno
Aaron Conole
maintainerPATCH v2 5/5 selftests: openvswitch: add ct-nat test case with ipv4
In reply to Aaron ConoleBuilding on the previous work, add a very simplistic NAT case using ipv4. This just tests dnat transformation
--- .../selftests/net/openvswitch/openvswitch.sh | 64 ++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 75 +++++++++++++++++++ 2 files changed, 139 insertions(+)
tools/testing/selftests/net/openvswitch/openvswitch.sh +64 -0
@@ -14,6 +14,7 @@ tests=" arp_ping eth-arp: Basic arp ping between two NS ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS + nat_connect_v4 ip4-nat-xon: Basic ipv4 tcp connection via NAT netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"
@@ -300,6 +301,69 @@ test_connect_v4 () { return 0 } +# nat_connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_nat_connect_v4 () { + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_nat_connect_v4" || return $? + + ovs_add_dp "test_nat_connect_v4" nat4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_nat_connect_v4" "nat4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + ip netns exec client ip route add default via 172.31.110.20 + + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.0.20)" \ + "ct(commit,nat(dst=172.31.110.20)),recirc(0x1)" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \ + "ct(commit,nat),recirc(0x2)" + + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),eth_type(0x0800),ipv4()" "2" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),eth_type(0x0800),ipv4()" "1" + + # do a ping + ovs_sbx "test_nat_connect_v4" ip netns exec client ping 192.168.0.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 192.168.0.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulation
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +75 -0
81 lines not on this page · raw message
Signature · 1 line
2.40.1
Re: [PATCH v2 net-next 5/5] selftests: openvswitch: add ct-nat test case with ipv4
Quoted 131 lines · Aaron Conole
Building on the previous work, add a very simplistic NAT case using ipv4. This just tests dnat transformation
Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/openvswitch.sh | 64 ++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 75 +++++++++++++++++++ 2 files changed, 139 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +64
-0@@ -14,6 +14,7 @@ tests=" arp_ping eth-arp: Basic arp ping between two NS ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS + nat_connect_v4 ip4-nat-xon: Basic ipv4 tcp connection via NAT netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces"@@ -300,6 +301,69 @@ test_connect_v4 () { return 0 } +# nat_connect_v4 test +# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_nat_connect_v4 () { + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_nat_connect_v4" || return $? + + ovs_add_dp "test_nat_connect_v4" nat4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_nat_connect_v4" "nat4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + ip netns exec client ip route add default via 172.31.110.20 + + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.0.20)" \ + "ct(commit,nat(dst=172.31.110.20)),recirc(0x1)" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \ + "ct(commit,nat),recirc(0x2)" + + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),eth_type(0x0800),ipv4()" "2" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),eth_type(0x0800),ipv4()" "1" + + # do a ping + ovs_sbx "test_nat_connect_v4" ip netns exec client ping 192.168.0.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 192.168.0.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulationtools/testing/selftests/net/openvswitch/ovs-dpctl.py +32
-0@@ -530,6 +530,81 @@ class ovsactions(nla): else: ctact["attrs"].append([scan[1], None]) actstr = actstr[strspn(actstr, ", ") :] + # it seems strange to put this here, but nat() is a complex + # sub-action and this lets it sit anywhere in the ct() action + if actstr.startswith("nat"): + actstr = actstr[3:] + natact = ovsactions.ctact.natattr() + + if actstr.startswith("("): + t = None + actstr = actstr[1:] + if actstr.startswith("src"): + t = "OVS_NAT_ATTR_SRC" + actstr = actstr[3:] + elif actstr.startswith("dst"): + t = "OVS_NAT_ATTR_DST" + actstr = actstr[3:] + + actstr, ip_block_min = parse_extract_field( + actstr, "=", "([0-9a-fA-F:\.\[]+)", str, False + ) + actstr, ip_block_max = parse_extract_field( + actstr, "-", "([0-9a-fA-F:\.\[]+)", str, False + ) + + # [XXXX:YYY::Z]:123 + # following RFC 3986 + # More complete parsing, ala RFC5952 isn't + # supported. + if actstr.startswith("]"): + actstr = actstr[1:] + if ip_block_min is not None and \ + ip_block_min.startswith("["): + ip_block_min = ip_block_min[1:]
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovsactions(nla): · line 574
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ if ip_block_max is not None and \ + ip_block_max.startswith("["): + ip_block_max = ip_block_max[1:] + + actstr, proto_min = parse_extract_field( + actstr, ":", "(\d+)", int, False + ) + actstr, proto_max = parse_extract_field( + actstr, "-", "(\d+)", int, False + )
I'm still struggling to make this part work:
On the one hand, ipv6 seems not fully supported by ovs-dpctl.py. If I try adding an ipv6 flow I end up needing to add a function such as as the following and use it to parse "ipv6()" field:
def convert_ipv6(data):
ip, _, mask = data.partition('/')
max_ip = pow(2, 128) - 1
if not ip:
ip = mask = 0
elif not mask:
mask = max
elif mask.isdigit():
mask = (max_ip << (128 - int(mask))) & max_ip
return ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed
OTOH, trying to support ipv6 makes ct ip/port range parsing more complex, for instance, this action: "ct(nat(src=10.0.0.240-10.0.0.254:32768-65535))"
fails, because it's parsed as:ip_block_min = 10.0.0.240ip_block_max = 10.0.0.254:32768proto_min = Noneproto_max = 65535
I would say we could drop ipv6 support for nat() action, making it simpler to parse or first detect if we're parsing ipv4 or ipv6 and use appropriate regexp on each case. E.g: https://github.com/openvswitch/ovs/blob/d460c473ebf9e9ab16da44cbfbb13a4911352195/python/ovs/flow/decoders.py#L430-L486
Another approach would be to stop trying to be human friendly and use an easier to parse syntax, something closer to key-value, e.g: "ct(ip_block_min=10.0.0.240, ip_block_max=10.0.0.254, proto_min=32768, proto_max=65535)". It'd be more verbose and not compatible with ovs tooling but this is a testing tool afterall. WDYT?
Quoted 13 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +13
-0+ + if t is not None: + natact["attrs"].append([t, None]) + + if ip_block_min is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MIN", ip_block_min] + ) + if ip_block_max is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MAX", ip_block_max] + ) + if proto_min is not None:
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovsactions(nla): · line 597
Quoted 10 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ natact["attrs"].append( + ["OVS_NAT_ATTR_PROTO_MIN", proto_min] + ) + if proto_max is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_PROTO_MAX", proto_max] + ) + + for natscan in ( + ("persist", "OVS_NAT_ATTR_PERSISTENT"),
odp-util.c defines this flag as "persistent", not sure if you intend to keep it compatible at all.
Quoted 13 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ ("hash", "OVS_NAT_ATTR_PROTO_HASH"), + ("random", "OVS_NAT_ATTR_PROTO_RANDOM"), + ): + if actstr.startswith(natscan[0]): + actstr = actstr[len(natscan[0]) :] + natact["attrs"].append([natscan[1], None]) + actstr = actstr[strspn(actstr, ", ") :] + + ctact["attrs"].append(["OVS_CT_ATTR_NAT", natact]) + actstr = actstr[strspn(actstr, ",) ") :] self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) parsed = True
Signature · 1 line
Adrián Moreno
Aaron Conole
maintainerRe: [PATCH v2 net-next 5/5] selftests: openvswitch: add ct-nat test case with ipv4
Quoted 136 lines · Adrian Moreno
Quoted 135 lines · Aaron Conole
Building on the previous work, add a very simplistic NAT case using ipv4. This just tests dnat transformation
Signed-off-by Aaron Conole <[email protected]>--- .../selftests/net/openvswitch/openvswitch.sh | 64 ++++++++++++++++ .../selftests/net/openvswitch/ovs-dpctl.py | 75 +++++++++++++++++++ 2 files changed, 139 insertions(+)tools/testing/selftests/net/openvswitch/openvswitch.sh +1
-0@@ -14,6 +14,7 @@ tests=" arp_ping eth-arp: Basic arp ping between two NS ct_connect_v4 ip4-ct-xon: Basic ipv4 tcp connection using ct connect_v4 ip4-xon: Basic ipv4 ping between two NS + nat_connect_v4 ip4-nat-xon: Basic ipv4 tcp connection via NAT netlink_checks ovsnl: validate netlink attrs and settings upcall_interfaces ovs: test the upcall interfaces" @@ -300,6 +301,69 @@ test_connect_v4 () {return 0 } +# nat_connect_v4 testtools/testing/selftests/net/openvswitch/openvswitch.sh +62
-0+# - client has 1500 byte MTU +# - server has 1500 byte MTU +# - use ICMP to ping in each direction +# - only allow CT state stuff to pass through new in c -> s +test_nat_connect_v4 () { + which nc >/dev/null 2>/dev/null || return $ksft_skip + + sbx_add "test_nat_connect_v4" || return $? + + ovs_add_dp "test_nat_connect_v4" nat4 || return 1 + info "create namespaces" + for ns in client server; do + ovs_add_netns_and_veths "test_nat_connect_v4" "nat4" "$ns" \ + "${ns:0:1}0" "${ns:0:1}1" || return 1 + done + + ip netns exec client ip addr add 172.31.110.10/24 dev c1 + ip netns exec client ip link set c1 up + ip netns exec server ip addr add 172.31.110.20/24 dev s1 + ip netns exec server ip link set s1 up + + ip netns exec client ip route add default via 172.31.110.20 + + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(1),eth(),eth_type(0x0806),arp()' '2' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + 'in_port(2),eth(),eth_type(0x0806),arp()' '1' || return 1 + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(1),eth(),eth_type(0x0800),ipv4(dst=192.168.0.20)" \ + "ct(commit,nat(dst=172.31.110.20)),recirc(0x1)" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "ct_state(-trk),in_port(2),eth(),eth_type(0x0800),ipv4()" \ + "ct(commit,nat),recirc(0x2)" + + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x1),ct_state(+trk-inv),in_port(1),eth(),eth_type(0x0800),ipv4()" "2" + ovs_add_flow "test_nat_connect_v4" nat4 \ + "recirc_id(0x2),ct_state(+trk-inv),in_port(2),eth(),eth_type(0x0800),ipv4()" "1" + + # do a ping + ovs_sbx "test_nat_connect_v4" ip netns exec client ping 192.168.0.20 -c 3 || return 1 + + # create an echo server in 'server' + echo "server" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "server" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 192.168.0.20 4443 || return 1 + + # Now test in the other direction (should fail) + echo "client" | \ + ovs_netns_spawn_daemon "test_nat_connect_v4" "client" \ + nc -lvnp 4443 + ovs_sbx "test_nat_connect_v4" ip netns exec client nc -i 1 -zv 172.31.110.10 4443 + if [ $? == 0 ]; then + info "connect to client was successful" + return 1 + fi + + info "done..." + return 0 +} + # netlink_validation # - Create a dp # - check no warning with "old version" simulationtools/testing/selftests/net/openvswitch/ovs-dpctl.py +39
-0@@ -530,6 +530,81 @@ class ovsactions(nla): else: ctact["attrs"].append([scan[1], None]) actstr = actstr[strspn(actstr, ", ") :] + # it seems strange to put this here, but nat() is a complex + # sub-action and this lets it sit anywhere in the ct() action + if actstr.startswith("nat"): + actstr = actstr[3:] + natact = ovsactions.ctact.natattr() + + if actstr.startswith("("): + t = None + actstr = actstr[1:] + if actstr.startswith("src"): + t = "OVS_NAT_ATTR_SRC" + actstr = actstr[3:] + elif actstr.startswith("dst"): + t = "OVS_NAT_ATTR_DST" + actstr = actstr[3:] + + actstr, ip_block_min = parse_extract_field( + actstr, "=", "([0-9a-fA-F:\.\[]+)", str, False + ) + actstr, ip_block_max = parse_extract_field( + actstr, "-", "([0-9a-fA-F:\.\[]+)", str, False + ) + + # [XXXX:YYY::Z]:123 + # following RFC 3986 + # More complete parsing, ala RFC5952 isn't + # supported. + if actstr.startswith("]"): + actstr = actstr[1:] + if ip_block_min is not None and \ + ip_block_min.startswith("["): + ip_block_min = ip_block_min[1:] + if ip_block_max is not None and \ + ip_block_max.startswith("["): + ip_block_max = ip_block_max[1:] + + actstr, proto_min = parse_extract_field( + actstr, ":", "(\d+)", int, False + )
Quoted 8 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovsactions(nla): · line 574
Quoted 3 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +3
-0+ actstr, proto_max = parse_extract_field( + actstr, "-", "(\d+)", int, False + )I'm still struggling to make this part work:
On the one hand, ipv6 seems not fully supported byovs-dpctl.py. If I try adding an ipv6 flow I end up needing to add a function such as as the following and use it to parse "ipv6()" field:
Let's just drop the ipv6 stuff from the NAT action support, and we can add it later when I address the flow key side of it.
Quoted 23 lines
def
convert_ipv6(data):
ip, _, mask =data.partition('/')
max_ip=pow(2, 128)- 1if not ip:
ip = mask = 0
elif not mask:
mask = max
elifmask.isdigit():
mask = (max_ip<< (128 - int(mask))) &max_ipreturn ipaddress.IPv6Address(ip).packed, ipaddress.IPv6Address(mask).packed
OTOH, trying to support ipv6 makes ct ip/port range parsing more complex, for instance, this action:
"ct(nat(src=10.0.0.240-10.0.0.254:32768-65535))"fails, because it's parsed as:
ip_block_min= 10.0.0.240ip_block_max= 10.0.0.254:32768proto_min= Noneproto_max= 65535
Quoted 4 lines
I would say we could drop ipv6 support for
nat()action, making it simpler to parse or first detect if we're parsing ipv4 or ipv6 and use appropriate regexp on each case. E.g:
https://github.com/openvswitch/ovs/blob/d460c473ebf9e9ab16da44cbfbb13a4911352195/python/ovs/flow/decoders.py#L430-L486
ACK
Quoted 5 lines
Another approach would be to stop trying to be human friendly and use an easier to parse syntax, something closer to key-value, e.g:
"ct(ip_block_min=10.0.0.240, ip_block_max=10.0.0.254, proto_min=32768, proto_max=65535)". It'd be more verbose and not compatible with ovs tooling but this is a testing tool afterall. WDYT?
I do like that we can use the flow output from the running ovs-vswitchd to generate test cases. I'd like, as much as possible, to try and keep it compatible.
Quoted 18 lines
Quoted 18 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +18
-0+ + if t is not None: + natact["attrs"].append([t, None]) + + if ip_block_min is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MIN", ip_block_min] + ) + if ip_block_max is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_IP_MAX", ip_block_max] + ) + if proto_min is not None: + natact["attrs"].append( + ["OVS_NAT_ATTR_PROTO_MIN", proto_min] + ) + if proto_max is not None: + natact["attrs"].append(
Quoted 8 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py class ovsactions(nla): · line 597
Quoted 5 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +5
-0+ ["OVS_NAT_ATTR_PROTO_MAX", proto_max] + ) + + for natscan in ( + ("persist", "OVS_NAT_ATTR_PERSISTENT"),
odp-util.cdefines this flag as "persistent", not sure if you intend to keep it compatible at all.
I will adjust when I resubmit.
Quoted 13 lines
Quoted 13 lines
tools/testing/selftests/net/openvswitch/ovs-dpctl.py +10
-0+ ("hash", "OVS_NAT_ATTR_PROTO_HASH"), + ("random", "OVS_NAT_ATTR_PROTO_RANDOM"), + ): + if actstr.startswith(natscan[0]): + actstr = actstr[len(natscan[0]) :] + natact["attrs"].append([natscan[1], None]) + actstr = actstr[strspn(actstr, ", ") :] + + ctact["attrs"].append(["OVS_CT_ATTR_NAT", natact]) + actstr = actstr[strspn(actstr, ",) ") :] self["attrs"].append(["OVS_ACTION_ATTR_CT", ctact]) parsed = True