dt-bindings: arm: Add Gateworks i.MX8M Plus gw71xx-2x board
Subsystems (2)
PATCH v2 1/2 dt-bindings: arm: Add Gateworks i.MX8M Plus gw71xx-2x board
Add DT compatible string for a Gateworks GW71xx-2x board based on the i.MX8M Plus SoC from NXP.
---
v2:
- fix commit message: s/Mini/Plus/
- add Krzysztof's tag
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -1032,6 +1032,7 @@ properties: - beacon,imx8mp-beacon-kit # i.MX8MP Beacon Development Kit - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board - polyhex,imx8mp-debix # Polyhex Debix boards
Signature · 1 line
2.25.1
PATCH v2 2/2 arm64: dts: freescale: Add imx8mp-venice-gw71xx-2x
The Gateworks imx8mp-venice-gw71xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW71xx Baseboard contains the following:
- GPS
- RJ45 GbE (eQoS)
- off-board I/O connector with UART, I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- USB Type-C with USB 2.0 host and peripheral support
- Wide range DC input supply
---
v2:
- change clock name from pcie0-refclk to clock-pcie0
- start properties with compatible then reg with pinctrl following
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mp-venice-gw71xx-2x.dts | 19 ++ .../dts/freescale/imx8mp-venice-gw71xx.dtsi | 236 ++++++++++++++++++ 3 files changed, 256 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts new file +19 -0
@@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Gateworks Corporation + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include "imx8mp-venice-gw702x.dtsi" +#include "imx8mp-venice-gw71xx.dtsi" + +/ { + model = "Gateworks Venice GW71xx-2x i.MX8MP Development Kit"; + compatible = "gateworks,imx8mp-gw71xx-2x", "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; +};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi new file +236 -0
236 lines not on this page · raw message
Signature · 1 line
2.25.1
Shawn Guo
AppliedQuoted 5 lines · Tim Harvey
Add DT compatible string for a Gateworks GW71xx-2x board based on the i.MX8M Plus SoC from NXP.
Signed-off-by Tim Harvey <[email protected]>
Applied both, thanks!