perf probe: Show correct error about @symbol for uprobe
Subsystems (2)
Masami Hiramatsu (Google)
maintainerPATCH 1/1 perf probe: Show correct error about @symbol for uprobe
From: Masami Hiramatsu (Google) <[email protected]>
Since @symbol variable access is not supported by uprobe event, it must be correctly warn user instead of kernel version update.
--- tools/perf/util/probe-event.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
tools/perf/util/probe-event.c +9 -4
@@ -2800,13 +2800,18 @@ static void warn_uprobe_event_compat(struct probe_trace_event *tev)if (!tev->uprobes || tev->nargs ==0 || !buf) goto out; -for (i =0 ; i < tev->nargs; i++) -if (strglobmatch (tev->args[i].value,"[$@+-]*" )) { -pr_warning ("Please upgrade your kernel to at least " -"3.14 to have access to feature %s\n" , +for (i =0 ; i < tev->nargs; i++) { +if (strchr (tev->args[i].value,'@' )) { +pr_warning ("%s accesses a variable by symbol name, but that is not supported for user application probe.\n" , + tev->args[i].value); +break ; + } +if (strglobmatch (tev->args[i].value,"[$+-]*" )) { +pr_warning ("Please upgrade your kernel to at least 3.14 to have access to feature %s\n" , tev->args[i].value);break ; } + } out:free (buf); }
Arnaldo Carvalho de Melo
maintainerEm Fri, Jul 28, 2023 at 11:19:30PM +0900, Masami Hiramatsu (Google) escreveu:
Quoted 4 lines
From: Masami Hiramatsu (Google) <[email protected]>
Since @symbol variable access is not supported by uprobe event, it must be correctly warn user instead of kernel version update.
Thanks, less cryptic now, applied.
But is that just a matter of writing code to support reading global variables from an uprobe?
- Arnaldo
Quoted 35 lines
Reported-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Masami Hiramatsu (Google) <[email protected]>--- tools/perf/util/probe-event.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)tools/perf/util/probe-event.c +9
-4@@ -2800,13 +2800,18 @@ static void warn_uprobe_event_compat(struct probe_trace_event *tev)if (!tev->uprobes || tev->nargs ==0 || !buf) goto out; -for (i =0 ; i < tev->nargs; i++) -if (strglobmatch (tev->args[i].value,"[$@+-]*" )) { -pr_warning ("Please upgrade your kernel to at least " -"3.14 to have access to feature %s\n" , +for (i =0 ; i < tev->nargs; i++) { +if (strchr (tev->args[i].value,'@' )) { +pr_warning ("%s accesses a variable by symbol name, but that is not supported for user application probe.\n" , + tev->args[i].value); +break ; + } +if (strglobmatch (tev->args[i].value,"[$+-]*" )) { +pr_warning ("Please upgrade your kernel to at least 3.14 to have access to feature %s\n" , tev->args[i].value);break ; } + } out:free (buf); }
Signature · 1 line
- Arnaldo
Masami Hiramatsu (Google)
maintainer(To: Oleg)
Quoted 10 lines · On Tue, 1 Aug 2023 09:55:07 -0300 Arnaldo Carvalho de Melo <[email protected]>…
Em Fri, Jul 28, 2023 at 11:19:30PM +0900, Masami Hiramatsu (Google) escreveu:
Quoted 4 lines
From: Masami Hiramatsu (Google) <[email protected]>
Since @symbol variable access is not supported by uprobe event, it must be correctly warn user instead of kernel version update.
Thanks, less cryptic now, applied.
But is that just a matter of writing code to support reading global variables from an uprobe?
Hm, maybe we can use "@+offset" for accessing symboled data, as far as it is loaded with the text section.
Oleg, what do you think about accessing symbols in data section from uprobes? Can we access it from user-land IP-relative address?
Thank you,
Quoted 43 lines
- Arnaldo
Quoted 35 lines
Reported-by Arnaldo Carvalho de Melo <[email protected]>Signed-off-by Masami Hiramatsu (Google) <[email protected]>--- tools/perf/util/probe-event.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)tools/perf/util/probe-event.c +9
-4@@ -2800,13 +2800,18 @@ static void warn_uprobe_event_compat(struct probe_trace_event *tev)if (!tev->uprobes || tev->nargs ==0 || !buf) goto out; -for (i =0 ; i < tev->nargs; i++) -if (strglobmatch (tev->args[i].value,"[$@+-]*" )) { -pr_warning ("Please upgrade your kernel to at least " -"3.14 to have access to feature %s\n" , +for (i =0 ; i < tev->nargs; i++) { +if (strchr (tev->args[i].value,'@' )) { +pr_warning ("%s accesses a variable by symbol name, but that is not supported for user application probe.\n" , + tev->args[i].value); +break ; + } +if (strglobmatch (tev->args[i].value,"[$+-]*" )) { +pr_warning ("Please upgrade your kernel to at least 3.14 to have access to feature %s\n" , tev->args[i].value);break ; } + } out:free (buf); }Signature · 1 line
- Arnaldo
Signature · 1 line
Masami Hiramatsu (Google) <[email protected]>
Hi Masami,
Quoted 3 lines · Masami Hiramatsu
Oleg, what do you think about accessing symbols in data section from uprobes? Can we access it from user-land IP-relative address?
Sorry, I don't I understand... I don't even understand the context, can't find the whole thread on lore.kernel.org/lkml. Plus I forgot EVERYTHING I knew about tracing/uprobes anyway ;)
but when I look at traceprobe_parse_probe_arg() paths it seems to me that uprobe can fetch the IP-relative address, not sure about the syntax but perhaps something like xxx=+OFFSET(%ip). The question is how tools/perf can calculate this OFFSET. But I am sure you understand this all much better than me.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
tools/perf/util/probe-event.c +0
-0@@ -2800,13 +2800,18 @@ static void warn_uprobe_event_compat(struct probe_trace_event *tev)if (!tev->uprobes || tev->nargs ==0 || !buf) goto out;
Quoted 9 lines
Quoted 9 lines
tools/perf/util/probe-event.c static void warn_uprobe_event_compat(struct probe_trace_event *tev) · line 2807
Quoted 9 lines
tools/perf/util/probe-event.c +5
-4-for (i =0 ; i < tev->nargs; i++) -if (strglobmatch (tev->args[i].value,"[$@+-]*" )) { - pr_warning("Please upgrade your kernel to at least " - "3.14 to have access to feature %s\n", +for (i =0 ; i < tev->nargs; i++) { +if (strchr (tev->args[i].value,'@' )) { +pr_warning ("%s accesses a variable by symbol name, but that is not supported for user application probe.\n" , + tev->args[i].value); +break ;
IIUC without this change @symbol will trigger the
/* uprobes don't support symbols */
if (!(ctx->flags & TPARG_FL_KERNEL)) {
trace_probe_log_err(ctx->offset, SYM_ON_UPROBE);
return -EINVAL;
}in parse_probe_arg(), right?
So FWIW the patch looks fine to me, but as you have mentioned tools/perf could probably (try to) turn @symbol into @+symbol_offset_in_file...
In short, sorry for spam, I can't help ;)
And just in case, I am on PTO till Aug 14, won't be able to read emails till then.
Oleg.
Masami Hiramatsu (Google)
maintainerQuoted 10 lines · On Thu, 3 Aug 2023 19:31:06 +0200 Oleg Nesterov <[email protected]> wrote:
Hi Masami,
Quoted 3 lines · Masami Hiramatsu
Oleg, what do you think about accessing symbols in data section from uprobes? Can we access it from user-land IP-relative address?
Sorry, I don't I understand... I don't even understand the context, can't find the whole thread on lore.kernel.org/lkml. Plus I forgot EVERYTHING I knew about tracing/uprobes anyway ;)
Oh, but thank you for replying :)
Quoted 6 lines
but when I look at
traceprobe_parse_probe_arg()paths it seems to me that uprobe can fetch the IP-relative address, not sure about the syntax but perhaps something like xxx=+OFFSET(%ip). The question is howtools/perfcan calculate this OFFSET. But I am sure you understand this all much better than me.
Yes, var=@+offset is the syntax. That will access the data in same file (and maybe in the same section?)
Quoted 19 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
tools/perf/util/probe-event.c +0
-0@@ -2800,13 +2800,18 @@ static void warn_uprobe_event_compat(struct probe_trace_event *tev)if (!tev->uprobes || tev->nargs ==0 || !buf) goto out;Quoted 9 lines
Quoted 9 lines
tools/perf/util/probe-event.c static void warn_uprobe_event_compat(struct probe_trace_event *tev) · line 2807
Quoted 9 lines
tools/perf/util/probe-event.c +5
-4-for (i =0 ; i < tev->nargs; i++) -if (strglobmatch (tev->args[i].value,"[$@+-]*" )) { - pr_warning("Please upgrade your kernel to at least " - "3.14 to have access to feature %s\n", +for (i =0 ; i < tev->nargs; i++) { +if (strchr (tev->args[i].value,'@' )) { +pr_warning ("%s accesses a variable by symbol name, but that is not supported for user application probe.\n" , + tev->args[i].value); +break ;IIUC without this change @symbol will trigger the
Quoted 7 lines
/* uprobes don't support symbols */ if (!(ctx->flags & TPARG_FL_KERNEL)) { trace_probe_log_err(ctx->offset, SYM_ON_UPROBE); return -EINVAL; }in
parse_probe_arg(), right?
Yes, that's right.
Quoted 3 lines
So FWIW the patch looks fine to me, but as you have mentioned
tools/perfcould probably (try to) turn @symbol into @+symbol_offset_in_file...
Yeah, that's a good point. Maybe I should try to find the data symbol and find the offset. One thing I'm not sure is the address in the data section maybe different from the address in the code section, and @+addr seems to point the data in the code section because it calculate the offset from the ip address.
Quoted 2 lines
In short, sorry for spam, I can't help ;)
No problem and thanks for your reply.
Quoted 6 lines
And just in case, I am on PTO till Aug 14, won't be able to read emails till then.
Oleg.
Thank you!
Signature · 1 line
Masami Hiramatsu (Google) <[email protected]>