Skip to contentSkip to conversation

SDM670 CPU Frequency Scaling

PATCH In review Richard Acayan 2 participants 6 messages Aug 2, 2023 – Aug 10, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover SDM670 CPU Frequency Scaling

Changes since v1 ([email protected]):
- removed voltage documentation in device tree (3/4)
- amended commit message to mention bandwidth scaling (3/4)
- accumulated review tags (1-2/4)

This adds CPU frequency scaling and the OSM L3 cache controller to the SDM670 device tree.

Richard Acayan (4):
dt-bindings: interconnect: add SDM670 OSM L3 compatible
arm64: dts: qcom: sdm670: add osm l3
arm64: dts: qcom: sdm670: add cpu frequency scaling
arm64: dts: qcom: sdm670: add frequency profile

 .../bindings/interconnect/qcom,osm-l3.yaml    |   1 +
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 175 ++++++++++++++++++
 2 files changed, 176 insertions(+)
Signature · 1 line
2.41.0
#1 lore raw

PATCH v2 1/4 dt-bindings: interconnect: add SDM670 OSM L3 compatible

Add the compatible for the OSM L3 interconnect used in the Snapdragon 670.

---
 Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml +1 -0
index 9d0a98d77ae9..21dae0b92819 100644
@@ -21,6 +21,7 @@ properties:
           - enum:
               - qcom,sc7180-osm-l3
               - qcom,sc8180x-osm-l3
+              - qcom,sdm670-osm-l3
               - qcom,sdm845-osm-l3
               - qcom,sm6350-osm-l3
               - qcom,sm8150-osm-l3
Signature · 1 line
2.41.0
#2 lore raw

PATCH v2 2/4 arm64: dts: qcom: sdm670: add osm l3

In reply to Richard Acayan

Add the interconnect node for L3 cache on SDM670.

---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +10 -0
index a1c207c0266d..45f9633d2d2c 100644
@@ -1354,5 +1354,15 @@ intc: interrupt-controller@17a00000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <3>;
 		};
+
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm670-osm-l3", "qcom,osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
 	};
 };
Signature · 1 line
2.41.0
#3 lore raw

PATCH v2 3/4 arm64: dts: qcom: sdm670: add cpu frequency scaling

In reply to Richard Acayan

Add CPU frequency scaling, and also add the corresponding memory and cache bandwidths for each frequency.

---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 149 +++++++++++++++++++++++++++
 1 file changed, 149 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +149 -0
index 45f9633d2d2c..e1ef3fc2ace0 100644
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -35,6 +36,10 @@ CPU0: cpu@0 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD0>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_0>;
@@ -56,6 +61,10 @@ CPU1: cpu@100 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD1>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_100>;
@@ -72,6 +81,10 @@ CPU2: cpu@200 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD2>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_200>;
@@ -88,6 +101,10 @@ CPU3: cpu@300 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD3>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_300>;
@@ -104,6 +121,10 @@ CPU4: cpu@400 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD4>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_400>;
@@ -120,6 +141,10 @@ CPU5: cpu@500 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD5>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_500>;
@@ -136,6 +161,10 @@ CPU6: cpu@600 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD6>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_600>;
@@ -152,6 +181,10 @@ CPU7: cpu@700 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			power-domains = <&CPU_PD7>;
 			power-domain-names = "psci";
 			next-level-cache = <&L2_700>;
@@ -246,6 +279,111 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp3: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 22118400>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 23040000>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp5: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp8: opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp10: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 19046400>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1364,5 +1502,16 @@ osm_l3: interconnect@17d41000 {
 
 			#interconnect-cells = <1>;
 		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
 	};
 };
Signature · 1 line
2.41.0
#4 lore raw

PATCH v2 4/4 arm64: dts: qcom: sdm670: add frequency profile

In reply to Richard Acayan

Add the coefficients for the CPU frequencies to aid in frequency scaling.

Profiling setup:
- freqbench (https://github.com/kdrag0n/freqbench)
- LineageOS kernel, android_kernel_google_msm-4.9
- recommended configuration options by freqbench
- disabled options that require clang or 32-bit compilers
- mmc governor switched from simple_ondemand to powersave

    Frequency domains: cpu1 cpu6
    Offline CPUs: cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
    Sampling power every 1000 ms
    Baseline power usage: 445 mW

    ===== CPU 1 =====
    Frequencies: 300 576 748 998 1209 1324 1516 1612 1708

     300:  1114     3.7 C/MHz     43 mW   11.6 J   25.8 I/mJ   269.4 s
     576:  2138     3.7 C/MHz     51 mW    7.1 J   42.2 I/mJ   140.3 s
     748:  2780     3.7 C/MHz     67 mW    7.3 J   41.3 I/mJ   107.9 s
     998:  3706     3.7 C/MHz     73 mW    5.9 J   51.1 I/mJ    80.9 s
    1209:  4490     3.7 C/MHz     86 mW    5.7 J   52.2 I/mJ    66.8 s
    1324:  4918     3.7 C/MHz     90 mW    5.5 J   54.6 I/mJ    61.0 s
    1516:  5631     3.7 C/MHz    103 mW    5.5 J   54.9 I/mJ    53.3 s
    1612:  5987     3.7 C/MHz    109 mW    5.5 J   55.0 I/mJ    50.1 s
    1708:  6344     3.7 C/MHz    126 mW    5.9 J   50.5 I/mJ    47.3 s

    ===== CPU 6 =====
    Frequencies: 300 652 825 979 1132 1363 1536 1747 1843 1996

     300:  1868     6.2 C/MHz     53 mW    8.5 J   35.2 I/mJ   160.6 s
     652:  4073     6.2 C/MHz     96 mW    7.1 J   42.4 I/mJ    73.7 s
     825:  5132     6.2 C/MHz    117 mW    6.9 J   43.7 I/mJ    58.5 s
     979:  6099     6.2 C/MHz    151 mW    7.4 J   40.4 I/mJ    49.2 s
    1132:  7071     6.2 C/MHz    207 mW    8.8 J   34.1 I/mJ    42.4 s
    1363:  8482     6.2 C/MHz    235 mW    8.3 J   36.1 I/mJ    35.4 s
    1536:  9578     6.2 C/MHz    287 mW    9.0 J   33.3 I/mJ    31.3 s
    1747: 10892     6.2 C/MHz    340 mW    9.4 J   32.0 I/mJ    27.6 s
    1843: 11471     6.2 C/MHz    368 mW    9.6 J   31.1 I/mJ    26.2 s
    1996: 12425     6.2 C/MHz    438 mW   10.6 J   28.3 I/mJ    24.2 s
---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +16 -0
index e1ef3fc2ace0..0ac39d3d68ca 100644
@@ -36,6 +36,8 @@ CPU0: cpu@0 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -61,6 +63,8 @@ CPU1: cpu@100 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -81,6 +85,8 @@ CPU2: cpu@200 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -101,6 +107,8 @@ CPU3: cpu@300 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -121,6 +129,8 @@ CPU4: cpu@400 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x400>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -141,6 +151,8 @@ CPU5: cpu@500 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x500>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -161,6 +173,8 @@ CPU6: cpu@600 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x600>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
@@ -181,6 +195,8 @@ CPU7: cpu@700 {
 			compatible = "qcom,kryo360";
 			reg = <0x0 0x700>;
 			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu6_opp_table>;
 			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
Signature · 1 line
2.41.0
#5 lore raw

Re: [PATCH v2 4/4] arm64: dts: qcom: sdm670: add frequency profile

Quoted 42 lines · Richard Acayan

Add the coefficients for the CPU frequencies to aid in frequency scaling.

Profiling setup:
- freqbench (https://github.com/kdrag0n/freqbench)
- LineageOS kernel, android_kernel_google_msm-4.9
- recommended configuration options by freqbench
- disabled options that require clang or 32-bit compilers
- mmc governor switched from simple_ondemand to powersave

    Frequency domains: cpu1 cpu6
    Offline CPUs: cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
    Sampling power every 1000 ms
    Baseline power usage: 445 mW

    ===== CPU 1 =====
    Frequencies: 300 576 748 998 1209 1324 1516 1612 1708

     300:  1114     3.7 C/MHz     43 mW   11.6 J   25.8 I/mJ   269.4 s
     576:  2138     3.7 C/MHz     51 mW    7.1 J   42.2 I/mJ   140.3 s
     748:  2780     3.7 C/MHz     67 mW    7.3 J   41.3 I/mJ   107.9 s
     998:  3706     3.7 C/MHz     73 mW    5.9 J   51.1 I/mJ    80.9 s
    1209:  4490     3.7 C/MHz     86 mW    5.7 J   52.2 I/mJ    66.8 s
    1324:  4918     3.7 C/MHz     90 mW    5.5 J   54.6 I/mJ    61.0 s
    1516:  5631     3.7 C/MHz    103 mW    5.5 J   54.9 I/mJ    53.3 s
    1612:  5987     3.7 C/MHz    109 mW    5.5 J   55.0 I/mJ    50.1 s
    1708:  6344     3.7 C/MHz    126 mW    5.9 J   50.5 I/mJ    47.3 s

    ===== CPU 6 =====
    Frequencies: 300 652 825 979 1132 1363 1536 1747 1843 1996

     300:  1868     6.2 C/MHz     53 mW    8.5 J   35.2 I/mJ   160.6 s
     652:  4073     6.2 C/MHz     96 mW    7.1 J   42.4 I/mJ    73.7 s
     825:  5132     6.2 C/MHz    117 mW    6.9 J   43.7 I/mJ    58.5 s
     979:  6099     6.2 C/MHz    151 mW    7.4 J   40.4 I/mJ    49.2 s
    1132:  7071     6.2 C/MHz    207 mW    8.8 J   34.1 I/mJ    42.4 s
    1363:  8482     6.2 C/MHz    235 mW    8.3 J   36.1 I/mJ    35.4 s
    1536:  9578     6.2 C/MHz    287 mW    9.0 J   33.3 I/mJ    31.3 s
    1747: 10892     6.2 C/MHz    340 mW    9.4 J   32.0 I/mJ    27.6 s
    1843: 11471     6.2 C/MHz    368 mW    9.6 J   31.1 I/mJ    26.2 s
    1996: 12425     6.2 C/MHz    438 mW   10.6 J   28.3 I/mJ    24.2 s
Quoted 2 lines

---

I've looked into this a bit and upstream handling of dynamic power seems broken on qcom.. Trying to resolve this

Konrad