arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
Subsystems (2)
Nishanth Menon
maintainerPATCH 1/1 arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
Fix up outstanding pingroup node names to be compliant with the upcoming pinctrl-single schema.
--- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 2 +- arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++-- arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 4 ++-- 5 files changed, 7 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +1 -1
@@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ >; }; - gbe_pmx_obsclk: gbe-pmx-clk-default { + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { pinctrl-single,pins = < AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */ >;
arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +1 -1
@@ -10,7 +10,7 @@ */ &main_pmx0 { - cp2102n_reset_pin_default: cp2102n-reset-pin-default { + cp2102n_reset_pin_default: cp2102n-reset-default-pins { pinctrl-single,pins = < /* (AF12) GPIO1_24, used as cp2102 reset */ AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
arch/arm64/boot/dts/ti/k3-am654-base-board.dts +1 -1
@@ -192,7 +192,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ >; }; - wkup_pca554_default: wkup-pca554-default { + wkup_pca554_default: wkup-pca554-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ >;
arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +2 -2
@@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ >; }; - main_bkey_pcie_reset: main-bkey-pcie-reset { + main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */ >;
@@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7) /* (AD13) GPIO1_19 */ >; }; - main_m2_pcie_mux_control: main-m2-pcie-mux-control { + main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7) /* (AG22) GPIO0_82 */ AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7) /* (AE20) GPIO0_88 */
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +2 -2
@@ -273,7 +273,7 @@ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ >; }; - mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default { + mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 { pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */ J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
@@ -289,7 +289,7 @@ J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */ }; &wkup_pmx3 { - mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default { + mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 { pinctrl-single,pins = < J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */ >;
Signature · 1 line
2.40.0
Quoted 2 lines · Nishanth Menon
Fix up outstanding pingroup node names to be compliant with the upcoming pinctrl-single schema.
Thanks looks good to me:
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Nishanth Menon,
Quoted 4 lines · Nishanth Menon
Fix up outstanding pingroup node names to be compliant with the upcoming pinctrl-single schema.
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
commit: 7a649518c13bc6cbbc83f27eda9d1b05b45fe3ac
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D