Skip to contentSkip to conversation

TI-Nspire cleanups

PATCH In review Andrew Davis 3 participants 12 messages Aug 2, 2023 – Aug 12, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v8 cover TI-Nspire cleanups

Hello all,

This series is an extended version of the series started here[0] and here[1].

We break out what was the first patch into one for DTS change and one for code changes as suggested by Krzysztof. Those are now patches 1 and 8 of this series (I kept the ACKs, hope that is okay).

While I was adding that, I noticed some other dtbs_check issues, so while here fixed some of those up too (patches 2-6).

Thanks,
Andrew

[0] https://lore.kernel.org/lkml/[email protected]/
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/

Changes from v7:
- Rebase on latest with new dts dirs

Changes from v6:
- Old first patch was taken, remove from series
- Add new patch 7/9, should be trivial enough

Changes from v5:
- Rebase on latest master
- Fix DT binding comments from Rob and add ACK

Changes from v4:
- Rebase on latest master

Changes from v3:
- Add Reviewed-by
- Make new binding for patch #1

Changes from v2:
- See cover letter message

Changes from v1:
- Add ACKs
- Rebase on latest

Andrew Davis (9):
ARM: dts: nspire: Use syscon-reboot to handle restart
ARM: dts: nspire: Fix cpu node to conform with DT binding
ARM: dts: nspire: Fix sram node to conform with DT binding
ARM: dts: nspire: Fix vbus_reg node to conform with DT binding
ARM: dts: nspire: Fix uart node to conform with DT binding
ARM: dts: nspire: Use MATRIX_KEY macro for linux,keymap
ARM: dts: nspire: Remove file name from the files themselves
ARM: nspire: Use syscon-reboot to handle restart
ARM: nspire: Remove unused header file mmio.h

 arch/arm/boot/dts/nspire/nspire-classic.dtsi |  2 -
 arch/arm/boot/dts/nspire/nspire-clp.dts      | 93 ++++++++++++++-----
 arch/arm/boot/dts/nspire/nspire-cx.dts       | 95 ++++++++++++++------
 arch/arm/boot/dts/nspire/nspire-tp.dts       | 93 ++++++++++++++-----
 arch/arm/boot/dts/nspire/nspire.dtsi         | 26 ++++--
 arch/arm/mach-nspire/Kconfig                 |  2 +
 arch/arm/mach-nspire/mmio.h                  | 16 ----
 arch/arm/mach-nspire/nspire.c                | 24 -----
 8 files changed, 231 insertions(+), 120 deletions(-)
 delete mode 100644 arch/arm/mach-nspire/mmio.h
Signature · 1 line
2.39.2
#1 lore raw

PATCH v8 1/9 ARM: dts: nspire: Use syscon-reboot to handle restart

Writing this bit can be handled by the syscon-reboot driver. Add this node to DT.

---
 arch/arm/boot/dts/nspire/nspire.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/boot/dts/nspire/nspire.dtsi +7 -0
index bb240e6a3a6f1..48fbc9d533c39 100644
@@ -172,7 +172,14 @@ rtc: rtc@90090000 {
 			};
 
 			misc: misc@900a0000 {
+				compatible = "ti,nspire-misc", "syscon", "simple-mfd";
 				reg = <0x900a0000 0x1000>;
+
+				reboot {
+					compatible = "syscon-reboot";
+					offset = <0x08>;
+					value = <0x02>;
+				};
 			};
 
 			pwr: pwr@900b0000 {
Signature · 1 line
2.39.2
#2 lore raw

PATCH v8 2/9 ARM: dts: nspire: Fix cpu node to conform with DT binding

In reply to Andrew Davis

This node does not follow the DT binding schema, correct this. Should result in no functional change.

---
 arch/arm/boot/dts/nspire/nspire.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
arch/arm/boot/dts/nspire/nspire.dtsi +5 -0
index 48fbc9d533c39..cb72370515126 100644
@@ -11,8 +11,13 @@ / {
 	interrupt-parent = <&intc>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
Signature · 1 line
2.39.2
#3 lore raw

PATCH v8 3/9 ARM: dts: nspire: Fix sram node to conform with DT binding

In reply to Andrew Davis

This node does not follow the DT binding schema, correct this. Should result in no functional change.

---
 arch/arm/boot/dts/nspire/nspire.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
arch/arm/boot/dts/nspire/nspire.dtsi +9 -2
index cb72370515126..f979b28e2576e 100644
@@ -26,8 +26,15 @@ bootrom: bootrom@0 {
 	};
 
 	sram: sram@a4000000 {
-		device = "memory";
-		reg = <0xa4000000 0x20000>;
+		compatible = "mmio-sram";
+		reg = <0xa4000000 0x20000>; /* 128k */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa4000000 0x20000>;
+
+		sram@0 {
+			reg = <0x0 0x20000>;
+		};
 	};
 
 	timer_clk: timer_clk {
Signature · 1 line
2.39.2
#4 lore raw

PATCH v8 4/9 ARM: dts: nspire: Fix vbus_reg node to conform with DT binding

In reply to Andrew Davis

This node does not follow the DT binding schema, correct this. All "regulator-fixed" are voltage type, so drop "regulator-type". Should result in no functional change.

---
 arch/arm/boot/dts/nspire/nspire.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/nspire/nspire.dtsi +0 -1
index f979b28e2576e..9587e1ebeb931 100644
@@ -71,7 +71,6 @@ vbus_reg: vbus_reg {
 		compatible = "regulator-fixed";
 
 		regulator-name = "USB VBUS output";
-		regulator-type = "voltage";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
Signature · 1 line
2.39.2
#5 lore raw

PATCH v8 5/9 ARM: dts: nspire: Fix uart node to conform with DT binding

In reply to Andrew Davis

This node does not follow the DT binding schema, correct this. The arm,pl011 binding requires the first clock to be named "uartclk". Should result in no functional change.

---
 arch/arm/boot/dts/nspire/nspire-cx.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/nspire/nspire-cx.dts +1 -1
index 590b7dff6ae50..837dbdd9af552 100644
@@ -24,7 +24,7 @@ &uart {
 	compatible = "arm,pl011", "arm,primecell";
 
 	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
+	clock-names = "uartclk", "apb_pclk";
 };
 
 &timer0 {
Signature · 1 line
2.39.2
#6 lore raw

PATCH v8 6/9 ARM: dts: nspire: Use MATRIX_KEY macro for linux,keymap

In reply to Andrew Davis

This looks better and allows us to see the row and column numbers more easily. Switch to this macro here.

---
 arch/arm/boot/dts/nspire/nspire-clp.dts | 90 +++++++++++++++++++------
 arch/arm/boot/dts/nspire/nspire-cx.dts  | 90 +++++++++++++++++++------
 arch/arm/boot/dts/nspire/nspire-tp.dts  | 90 +++++++++++++++++++------
 3 files changed, 204 insertions(+), 66 deletions(-)
arch/arm/boot/dts/nspire/nspire-clp.dts +68 -22
index f52f38c615886..916ede0c2499c 100644
@@ -6,32 +6,78 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
+
 /include/ "nspire-classic.dtsi"
 
 &keypad {
 	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
+		MATRIX_KEY(0,  0, 0x1c)
+		MATRIX_KEY(0,  1, 0x1c)
+		MATRIX_KEY(0,  2, 0x39)
+		MATRIX_KEY(0,  4, 0x2c)
+		MATRIX_KEY(0,  5, 0x34)
+		MATRIX_KEY(0,  6, 0x15)
+		MATRIX_KEY(0,  7, 0x0b)
+		MATRIX_KEY(0,  8, 0x2d)
+		MATRIX_KEY(1,  0, 0x33)
+		MATRIX_KEY(1,  1, 0x4e)
+		MATRIX_KEY(1,  2, 0x11)
+		MATRIX_KEY(1,  3, 0x04)
+		MATRIX_KEY(1,  4, 0x2f)
+		MATRIX_KEY(1,  5, 0x03)
+		MATRIX_KEY(1,  6, 0x16)
+		MATRIX_KEY(1,  7, 0x02)
+		MATRIX_KEY(1,  8, 0x14)
+		MATRIX_KEY(2,  0, 0x62)
+		MATRIX_KEY(2,  1, 0x0c)
+		MATRIX_KEY(2,  2, 0x1f)
+		MATRIX_KEY(2,  3, 0x07)
+		MATRIX_KEY(2,  4, 0x13)
+		MATRIX_KEY(2,  5, 0x06)
+		MATRIX_KEY(2,  6, 0x10)
+		MATRIX_KEY(2,  7, 0x05)
+		MATRIX_KEY(2,  8, 0x19)
+		MATRIX_KEY(3,  0, 0x27)
+		MATRIX_KEY(3,  1, 0x37)
+		MATRIX_KEY(3,  2, 0x18)
+		MATRIX_KEY(3,  3, 0x0a)
+		MATRIX_KEY(3,  4, 0x31)
+		MATRIX_KEY(3,  5, 0x09)
+		MATRIX_KEY(3,  6, 0x32)
+		MATRIX_KEY(3,  7, 0x08)
+		MATRIX_KEY(3,  8, 0x26)
+		MATRIX_KEY(4,  0, 0x28)
+		MATRIX_KEY(4,  1, 0x35)
+		MATRIX_KEY(4,  2, 0x25)
+		MATRIX_KEY(4,  4, 0x24)
+		MATRIX_KEY(4,  6, 0x17)
+		MATRIX_KEY(4,  8, 0x23)
+		MATRIX_KEY(5,  0, 0x28)
+		MATRIX_KEY(5,  2, 0x22)
+		MATRIX_KEY(5,  3, 0x1b)
+		MATRIX_KEY(5,  4, 0x21)
+		MATRIX_KEY(5,  5, 0x1a)
+		MATRIX_KEY(5,  6, 0x12)
+		MATRIX_KEY(5,  7, 0x6f)
+		MATRIX_KEY(5,  8, 0x20)
+		MATRIX_KEY(5,  9, 0x2a)
+		MATRIX_KEY(6,  1, 0x1c)
+		MATRIX_KEY(6,  2, 0x2e)
+		MATRIX_KEY(6,  3, 0x68)
+		MATRIX_KEY(6,  4, 0x30)
+		MATRIX_KEY(6,  5, 0x6d)
+		MATRIX_KEY(6,  6, 0x1e)
+		MATRIX_KEY(6,  7, 0x01)
+		MATRIX_KEY(6,  8, 0x2b)
+		MATRIX_KEY(6,  9, 0x0f)
+		MATRIX_KEY(7,  0, 0x67)
+		MATRIX_KEY(7,  2, 0x6a)
+		MATRIX_KEY(7,  4, 0x6c)
+		MATRIX_KEY(7,  6, 0x69)
+		MATRIX_KEY(7,  7, 0x0e)
+		MATRIX_KEY(7,  8, 0x1d)
+		MATRIX_KEY(7, 10, 0x0d)
 	>;
 };
 
arch/arm/boot/dts/nspire/nspire-cx.dts +68 -22

102 lines not on this page · raw message

arch/arm/boot/dts/nspire/nspire-tp.dts +68 -22

100 lines not on this page · raw message

Signature · 1 line
2.39.2
#7 lore raw

PATCH v8 7/9 ARM: dts: nspire: Remove file name from the files themselves

In reply to Andrew Davis

File names inside the file does not add much and just makes it difficult to move the files, often the file name is not updated and becomes wrong. Remove them.

---
 arch/arm/boot/dts/nspire/nspire-classic.dtsi | 2 --
 arch/arm/boot/dts/nspire/nspire-clp.dts      | 3 +--
 arch/arm/boot/dts/nspire/nspire-cx.dts       | 3 +--
 arch/arm/boot/dts/nspire/nspire-tp.dts       | 3 +--
 arch/arm/boot/dts/nspire/nspire.dtsi         | 2 --
 5 files changed, 3 insertions(+), 10 deletions(-)
arch/arm/boot/dts/nspire/nspire-classic.dtsi +0 -2
index 01e1bb7c3c6cb..a6e9cbf51524d 100644
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
  *  Copyright (C) 2013 Daniel Tang <[email protected]>
  */
 
arch/arm/boot/dts/nspire/nspire-clp.dts +1 -2
index 916ede0c2499c..c5773f770fd49 100644
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
  *  Copyright (C) 2013 Daniel Tang <[email protected]>
  */
+
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
arch/arm/boot/dts/nspire/nspire-cx.dts +1 -2
index 96c48fc522035..29f0181e5b385 100644
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
  *  Copyright (C) 2013 Daniel Tang <[email protected]>
  */
+
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
arch/arm/boot/dts/nspire/nspire-tp.dts +1 -2
index 235cd4264da79..3f0107f1c2c7b 100644
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
  *  Copyright (C) 2013 Daniel Tang <[email protected]>
  */
+
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
arch/arm/boot/dts/nspire/nspire.dtsi +0 -2
index 9587e1ebeb931..aecaca5ee1ebb 100644
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/boot/nspire.dtsi
- *
  *  Copyright (C) 2013 Daniel Tang <[email protected]>
  */
 
Signature · 1 line
2.39.2
#8 lore raw

PATCH v8 8/9 ARM: nspire: Use syscon-reboot to handle restart

In reply to Andrew Davis

Writing this bit can be handled by the DT syscon-reboot driver. Enable that driver and remove the machine_desc version.

---
 arch/arm/mach-nspire/Kconfig  |  2 ++
 arch/arm/mach-nspire/mmio.h   |  3 ---
 arch/arm/mach-nspire/nspire.c | 10 ----------
 3 files changed, 2 insertions(+), 13 deletions(-)
arch/arm/mach-nspire/Kconfig +2 -0
index b7a3871876d75..0ffdcaca1e6b4 100644
@@ -9,5 +9,7 @@ config ARCH_NSPIRE
 	select ARM_VIC
 	select ARM_TIMER_SP804
 	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
 	help
 	  This enables support for systems using the TI-NSPIRE CPU
arch/arm/mach-nspire/mmio.h +0 -3
index 48e32f13f3119..2ce0656139ece 100644
@@ -5,9 +5,6 @@
  *	Copyright (C) 2013 Daniel Tang <[email protected]>
  */
 
-#define NSPIRE_MISC_PHYS_BASE		0x900A0000
-#define NSPIRE_MISC_HWRESET		0x08
-
 #define NSPIRE_PWR_PHYS_BASE		0x900B0000
 #define NSPIRE_PWR_VIRT_BASE		0xFEEB0000
 #define NSPIRE_PWR_BUS_DISABLE1		0x18
arch/arm/mach-nspire/nspire.c +0 -10
index 2d4abb0288b9d..1e13337972dd5 100644
@@ -27,16 +27,6 @@ static const char *const nspire_dt_match[] __initconst = {
 	NULL,
 };
 
-static void nspire_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
-	if (!base)
-		return;
-
-	writel(2, base + NSPIRE_MISC_HWRESET);
-}
-
 DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
 	.dt_compat	= nspire_dt_match,
-	.restart	= nspire_restart,
 MACHINE_END
Signature · 1 line
2.39.2
#9 lore raw

PATCH v8 9/9 ARM: nspire: Remove unused header file mmio.h

In reply to Andrew Davis

The Nspire boardfile platform drivers have all been converted. None of the definitions in this header are used anymore. Remove it.

While here lets remove all the other unused headers and the file name from in the file itself.

---
 arch/arm/mach-nspire/mmio.h   | 13 -------------
 arch/arm/mach-nspire/nspire.c | 14 --------------
 2 files changed, 27 deletions(-)
 delete mode 100644 arch/arm/mach-nspire/mmio.h
arch/arm/mach-nspire/mmio.h deleted +0 -13
deleted file mode 100644
index 2ce0656139ece..0000000000000
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *	linux/arch/arm/mach-nspire/mmio.h
- *
- *	Copyright (C) 2013 Daniel Tang <[email protected]>
- */
-
-#define NSPIRE_PWR_PHYS_BASE		0x900B0000
-#define NSPIRE_PWR_VIRT_BASE		0xFEEB0000
-#define NSPIRE_PWR_BUS_DISABLE1		0x18
-#define NSPIRE_PWR_BUS_DISABLE2		0x20
-
-#define NSPIRE_LCD_PHYS_BASE		0xC0000000
arch/arm/mach-nspire/nspire.c +0 -14
index 1e13337972dd5..2fbfc23237ffe 100644
@@ -1,23 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *	linux/arch/arm/mach-nspire/nspire.c
- *
  *	Copyright (C) 2013 Daniel Tang <[email protected]>
  */
-#include <linux/init.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/clkdev.h>
-#include <linux/amba/bus.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include "mmio.h"
 
 static const char *const nspire_dt_match[] __initconst = {
 	"ti,nspire",
Signature · 1 line
2.39.2
Tested-by on the v8 series
#10 lore raw
In reply to Andrew Davis

Hi,

Am Mittwoch, 2. August 2023, 17:33:24 CEST schrieb Andrew Davis:

Quoted 11 lines

Hello all,

This series is an extended version of the series started here[0] and here[1].

We break out what was the first patch into one for DTS change and one for code changes as suggested by Krzysztof. Those are now patches 1 and 8 of this series (I kept the ACKs, hope that is okay).

While I was adding that, I noticed some other dtbs_check issues, so while here fixed some of those up too (patches 2-6).

Whole series applied on top of cacc6e22932f and confirmed to work:

Thanks,
Fabian

Quoted 52 lines

Thanks,
Andrew

[0] https://lore.kernel.org/lkml/[email protected]/
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/

Changes from v7:
- Rebase on latest with new dts dirs

Changes from v6:
- Old first patch was taken, remove from series
- Add new patch 7/9, should be trivial enough

Changes from v5:
- Rebase on latest master
- Fix DT binding comments from Rob and add ACK

Changes from v4:
- Rebase on latest master

Changes from v3:
- Add Reviewed-by
- Make new binding for patch #1

Changes from v2:
- See cover letter message

Changes from v1:
- Add ACKs
- Rebase on latest

Andrew Davis (9):
ARM: dts: nspire: Use syscon-reboot to handle restart
ARM: dts: nspire: Fix cpu node to conform with DT binding
ARM: dts: nspire: Fix sram node to conform with DT binding
ARM: dts: nspire: Fix vbus_reg node to conform with DT binding
ARM: dts: nspire: Fix uart node to conform with DT binding
ARM: dts: nspire: Use MATRIX_KEY macro for linux,keymap
ARM: dts: nspire: Remove file name from the files themselves
ARM: nspire: Use syscon-reboot to handle restart
ARM: nspire: Remove unused header file mmio.h

 arch/arm/boot/dts/nspire/nspire-classic.dtsi |  2 -
 arch/arm/boot/dts/nspire/nspire-clp.dts      | 93 ++++++++++++++-----
 arch/arm/boot/dts/nspire/nspire-cx.dts       | 95 ++++++++++++++------
 arch/arm/boot/dts/nspire/nspire-tp.dts       | 93 ++++++++++++++-----
 arch/arm/boot/dts/nspire/nspire.dtsi         | 26 ++++--
 arch/arm/mach-nspire/Kconfig                 |  2 +
 arch/arm/mach-nspire/mmio.h                  | 16 ----
 arch/arm/mach-nspire/nspire.c                | 24 -----
 8 files changed, 231 insertions(+), 120 deletions(-)
 delete mode 100644 arch/arm/mach-nspire/mmio.h
#11 lore raw
Quoted 12 lines · Fabian Vogt

Hi,

Am Mittwoch, 2. August 2023, 17:33:24 CEST schrieb Andrew Davis:

Quoted 9 lines

Hello all,

This series is an extended version of the series started here[0] and here[1].

We break out what was the first patch into one for DTS change and one for code changes as suggested by Krzysztof. Those are now patches 1 and 8 of this series (I kept the ACKs, hope that is okay).

Quoted 6 lines
Quoted 2 lines

While I was adding that, I noticed some other dtbs_check issues, so while here fixed some of those up too (patches 2-6).

Whole series applied on top of cacc6e22932f and confirmed to work:

I've added all 9 patches to the soc tree now, the first seven in the soc/dt branch, the other two in the soc/arm branch.

This does mean that the soc/arm branch has a minor regression when tested by itself, as it won't be able to restart the system, which is a regression we'd still get with old dtb files, but I think this is acceptable here since it does not impact normal operation, and there is a very small user base that is affected by this.

Thanks,

Arnd