Skip to contentSkip to conversation

lpfc: Remove reftag check in DIF paths

PATCH Applied Justin Tee 2 participants 2 messages Aug 3, 2023 – Aug 8, 2023

Subsystems (2)
lore
Share & tools
lore

Justin Tee

author
#0 lore raw

PATCH 1/1 lpfc: Remove reftag check in DIF paths

When preparing protection DIF I/O for DMA, the driver obtains reference tags from scsi_prot_ref_tag. Previously, there was a wrong assumption that an all 0xffffffff value meant error and thus the driver failed the I/O. This patch removes the evaluation code and accepts whatever the upper layer returns.

---
 drivers/scsi/lpfc/lpfc_scsi.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)
drivers/scsi/lpfc/lpfc_scsi.c +3 -17
index a62e091894f6..d26941b131fd 100644
@@ -109,8 +109,6 @@ lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
 	}
 }
 
-#define LPFC_INVALID_REFTAG ((u32)-1)
-
 /**
  * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
  * @phba: The Hba for which this call is being executed.
@@ -978,8 +976,6 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	sgpe = scsi_prot_sglist(sc);
 	lba = scsi_prot_ref_tag(sc);
-	if (lba == LPFC_INVALID_REFTAG)
-		return 0;
 
 	/* First check if we need to match the LBA */
 	if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
@@ -1560,8 +1556,6 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1723,8 +1717,6 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	/* extract some info from the scsi command */
 	blksize = scsi_prot_interval(sc);
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -1953,8 +1945,6 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2154,8 +2144,6 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	/* extract some info from the scsi command */
 	blksize = scsi_prot_interval(sc);
 	reftag = scsi_prot_ref_tag(sc);
-	if (reftag == LPFC_INVALID_REFTAG)
-		goto out;
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	rc = lpfc_bg_err_inject(phba, sc, &reftag, NULL, 1);
@@ -2746,8 +2734,6 @@ lpfc_calc_bg_err(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
 
 		src = (struct scsi_dif_tuple *)sg_virt(sgpe);
 		start_ref_tag = scsi_prot_ref_tag(cmd);
-		if (start_ref_tag == LPFC_INVALID_REFTAG)
-			goto out;
 		start_app_tag = src->app_tag;
 		len = sgpe->length;
 		while (src && protsegcnt) {
@@ -3493,11 +3479,11 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
 			     scsi_cmnd->sc_data_direction);
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-			"9084 Cannot setup S/G List for HBA"
-			"IO segs %d/%d SGL %d SCSI %d: %d %d\n",
+			"9084 Cannot setup S/G List for HBA "
+			"IO segs %d/%d SGL %d SCSI %d: %d %d %d\n",
 			lpfc_cmd->seg_cnt, lpfc_cmd->prot_seg_cnt,
 			phba->cfg_total_seg_cnt, phba->cfg_sg_seg_cnt,
-			prot_group_type, num_sge);
+			prot_group_type, num_sge, ret);
 
 	lpfc_cmd->seg_cnt = 0;
 	lpfc_cmd->prot_seg_cnt = 0;
Signature · 1 line
2.38.0
#1 lore raw
Quoted 8 lines · Justin Tee

When preparing protection DIF I/O for DMA, the driver obtains reference tags from scsi_prot_ref_tag. Previously, there was a wrong assumption that an all 0xffffffff value meant error and thus the driver failed the I/O. This patch removes the evaluation code and accepts whatever the upper layer returns.

[...]

Applied to 6.5/scsi-fixes, thanks!

[1/1] lpfc: Remove reftag check in DIF paths

      https://git.kernel.org/mkp/scsi/c/8eebf0e84f06
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering