Skip to contentSkip to conversation

Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C

PATCH Superseded [email protected] 3 participants 3 messages Aug 4, 2023

Subsystems (3)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C

From: Max Chou <[email protected]>

In the commit of linux-firmware project, rtl8852cu_fw.bin is updated as FW v2 format[1]. Consider the case that if driver did not be updated for FW v2 supported[2], it can not use FW v2.
By Canonical's suggestion, older driver should be able to load FW v1, so rtl8852cu_fw.bin will be revert to the previous commit as FW v1 and add rtl8852cu_fw_v2.bin as FW v2. This item will be started on linux-firmware project.

In this commit, the driver prefers to load FW v2 if available. Fallback to FW v1 otherwise.

Note that the driver has supported to extract the data for v1 and v2 since the commit[1].
The previous FW format of RTL8852C is v1. After the commit[2], the FW format was changed to v2. Only RTL8852C suffered the different FW formats, so we will use rtl8852cu_fw.bin for the original commit as FW v1 and rtl8852cu_fw_v2.bin for the future maintained as FW v2. Other Realtek chips will not been impacted by this patch.

To do on linux-firmware project after this commit.
1. revert '55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225")'
=> rtl_bt/rtl8852cu_fw.bin: FW v1 (stay at ver. 0xD7B8_FABF)
2. Add a new commit for rtl8852cu_fw_v2.bin =>rtl_bt/rtl8852cu_fw_v2.bin: FW v2 (to be maintained)

Reference:
[1]'9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")' [2]'55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware

    to 0x040D_7225")'
Fixes 9a24ce5e29b ("Bluetooth: btrtl: Firmware format v2 support")

---
Changes in v2:
- Tuning the code for more readable. Thanks Juerg!
- Modify the commit log.

---
 drivers/bluetooth/btrtl.c | 70 +++++++++++++++++++++++++--------------
 1 file changed, 45 insertions(+), 25 deletions(-)
drivers/bluetooth/btrtl.c +45 -25
index ddae6524106d..84c2c2e1122f 100644
@@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
 	  .config_needed = false,
 	  .has_rom_version = false,
-	  .fw_name = "rtl_bt/rtl8723a_fw.bin",
+	  .fw_name = "rtl_bt/rtl8723a_fw",
 	  .cfg_name = NULL,
 	  .hw_info = "rtl8723au" },
 
@@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723bs_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723bs_fw",
 	  .cfg_name = "rtl_bt/rtl8723bs_config",
 	  .hw_info  = "rtl8723bs" },
 
@@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
 	  .config_needed = false,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723b_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723b_fw",
 	  .cfg_name = "rtl_bt/rtl8723b_config",
 	  .hw_info  = "rtl8723bu" },
 
@@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
 	  .hci_bus = HCI_UART,
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723cs_cg_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723cs_cg_fw",
 	  .cfg_name = "rtl_bt/rtl8723cs_cg_config",
 	  .hw_info  = "rtl8723cs-cg" },
 
@@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
 	  .hci_bus = HCI_UART,
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723cs_vf_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723cs_vf_fw",
 	  .cfg_name = "rtl_bt/rtl8723cs_vf_config",
 	  .hw_info  = "rtl8723cs-vf" },
 
@@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
 	  .hci_bus = HCI_UART,
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723cs_xx_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723cs_xx_fw",
 	  .cfg_name = "rtl_bt/rtl8723cs_xx_config",
 	  .hw_info  = "rtl8723cs" },
 
@@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723d_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723d_fw",
 	  .cfg_name = "rtl_bt/rtl8723d_config",
 	  .hw_info  = "rtl8723du" },
 
@@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
 	  .config_needed = true,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8723ds_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8723ds_fw",
 	  .cfg_name = "rtl_bt/rtl8723ds_config",
 	  .hw_info  = "rtl8723ds" },
 
@@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
 	  .config_needed = false,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8821a_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8821a_fw",
 	  .cfg_name = "rtl_bt/rtl8821a_config",
 	  .hw_info  = "rtl8821au" },
 
@@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8821c_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8821c_fw",
 	  .cfg_name = "rtl_bt/rtl8821c_config",
 	  .hw_info  = "rtl8821cu" },
 
@@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = true,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8821cs_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8821cs_fw",
 	  .cfg_name = "rtl_bt/rtl8821cs_config",
 	  .hw_info  = "rtl8821cs" },
 
@@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
 	  .config_needed = false,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8761a_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8761a_fw",
 	  .cfg_name = "rtl_bt/rtl8761a_config",
 	  .hw_info  = "rtl8761au" },
 
@@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8761b_fw",
 	  .cfg_name = "rtl_bt/rtl8761b_config",
 	  .hw_info  = "rtl8761btv" },
 
@@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
 	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
 	  .config_needed = false,
 	  .has_rom_version = true,
-	  .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8761bu_fw",
 	  .cfg_name = "rtl_bt/rtl8761bu_config",
 	  .hw_info  = "rtl8761bu" },
 
@@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = true,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8822cs_fw",
 	  .cfg_name = "rtl_bt/rtl8822cs_config",
 	  .hw_info  = "rtl8822cs" },
 
@@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = true,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8822cs_fw",
 	  .cfg_name = "rtl_bt/rtl8822cs_config",
 	  .hw_info  = "rtl8822cs" },
 
@@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8822cu_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8822cu_fw",
 	  .cfg_name = "rtl_bt/rtl8822cu_config",
 	  .hw_info  = "rtl8822cu" },
 
@@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = true,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8822b_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8822b_fw",
 	  .cfg_name = "rtl_bt/rtl8822b_config",
 	  .hw_info  = "rtl8822bu" },
 
@@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8852au_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8852au_fw",
 	  .cfg_name = "rtl_bt/rtl8852au_config",
 	  .hw_info  = "rtl8852au" },
 
@@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = true,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8852bs_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8852bs_fw",
 	  .cfg_name = "rtl_bt/rtl8852bs_config",
 	  .hw_info  = "rtl8852bs" },
 
@@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8852bu_fw",
 	  .cfg_name = "rtl_bt/rtl8852bu_config",
 	  .hw_info  = "rtl8852bu" },
 
@@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = true,
-	  .fw_name  = "rtl_bt/rtl8852cu_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8852cu_fw",
 	  .cfg_name = "rtl_bt/rtl8852cu_config",
 	  .hw_info  = "rtl8852cu" },
 
@@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
 	  .config_needed = false,
 	  .has_rom_version = true,
 	  .has_msft_ext = false,
-	  .fw_name  = "rtl_bt/rtl8851bu_fw.bin",
+	  .fw_name  = "rtl_bt/rtl8851bu_fw",
 	  .cfg_name = "rtl_bt/rtl8851bu_config",
 	  .hw_info  = "rtl8851bu" },
 	};
@@ -1045,6 +1045,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	struct sk_buff *skb;
 	struct hci_rp_read_local_version *resp;
 	struct hci_command_hdr *cmd;
+	char fw_name[40];
 	char cfg_name[40];
 	u16 hci_rev, lmp_subver;
 	u8 hci_ver, lmp_ver, chip_type = 0;
@@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 			goto err_free;
 	}
 
-	btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
-					  &btrtl_dev->fw_data);
+	if (!btrtl_dev->ic_info->fw_name) {
+		ret = -ENOMEM;
+		goto err_free;
+	}
+
+	btrtl_dev->fw_len = -EIO;
+	if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) {
+		snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
+				btrtl_dev->ic_info->fw_name);
+		btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+				&btrtl_dev->fw_data);
+	}
+
+	if (btrtl_dev->fw_len < 0) {
+		snprintf(fw_name, sizeof(fw_name), "%s.bin",
+				btrtl_dev->ic_info->fw_name);
+		btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+				&btrtl_dev->fw_data);
+	}
+
 	if (btrtl_dev->fw_len < 0) {
 		rtl_dev_err(hdev, "firmware file %s not found",
 			    btrtl_dev->ic_info->fw_name);
@@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
Signature · 1 line
2.34.1
#1 lore raw
FYI: kernel test robot notices the stable kernel rule is not satisfied.

Hi,

Thanks for your patch.

FYI: kernel test robot notices the stable kernel rule is not satisfied.

Rule: 'Cc: [email protected]' or 'commit <sha1> upstream.'
Subject: [PATCH v2] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C

The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#2 lore raw
In reply to [email protected]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=773049

---Test result---

Test Summary:

CheckPatch                    FAIL      1.07 seconds
GitLint                       PASS      0.27 seconds
SubjectPrefix                 PASS      0.07 seconds
BuildKernel                   PASS      46.44 seconds
CheckAllWarning               PASS      50.56 seconds
CheckSparse                   PASS      56.03 seconds
CheckSmatch                   PASS      150.02 seconds
BuildKernel32                 PASS      44.31 seconds
TestRunnerSetup               PASS      676.10 seconds
TestRunner_l2cap-tester       PASS      34.63 seconds
TestRunner_iso-tester         PASS      91.63 seconds
TestRunner_bnep-tester        PASS      15.60 seconds
TestRunner_mgmt-tester        PASS      280.65 seconds
TestRunner_rfcomm-tester      PASS      23.38 seconds
TestRunner_sco-tester         PASS      23.01 seconds
TestRunner_ioctl-tester       PASS      26.18 seconds
TestRunner_mesh-tester        PASS      19.82 seconds
TestRunner_smp-tester         PASS      20.83 seconds
TestRunner_userchan-tester    PASS      16.29 seconds
IncrementalBuild              PASS      41.38 seconds

Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v2] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line) #89:
The previous FW format of RTL8852C is v1. After the commit[2], the FW format

WARNING: Please use correct Fixes: style 'Fixes: <12 chars of sha1> ("<title line>")' - ie: 'Fixes: ("Bluetooth: btrtl: Firmware format v2 support")' #107:

Fixes 9a24ce5e29b ("Bluetooth: btrtl: Firmware format v2 support")

total: 0 errors, 2 warnings, 224 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.

/github/workspace/src/src/13341662.patch has style problems, please review.

NOTE: Ignored message types: UNKNOWN_COMMIT_ID

NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Use of uninitialized value $cid in concatenation (.) or string at /github/workspace/src/src/scripts/checkpatch.pl line 3226.

---
Regards,
Linux Bluetooth