Add Support for the FriendlyElec NanoPC T6
Subsystems (2)
v2 cover Add Support for the FriendlyElec NanoPC T6
Hello,
This adds support for the RK3588-based NanoPC T6 single board computer. Note this series is dependent on the PCIe 3 support [0] being upstreamed. The NanoPC T6 uses PCIe3x4 like the Rock 5B and EVB1.
[0] https://lore.kernel.org/all/[email protected]/
v2:
- remove unnecessary "okay" status from sound
- add '-regulator' suffix on 2 regulators that were missing them
- use generic node name for rtc
- remove extra lines
- fix alignment in I2S entry
v1: https://lore.kernel.org/all/[email protected]/
Thomas McKahan (2):
dt-bindings: arm: rockchip: Add NanoPC T6
arm64: dts: rockchip: Add NanoPC T6
.../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588-nanopc-t6.dts | 842 ++++++++++++++++++ 3 files changed, 848 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
Signature · 1 line
2.34.1
PATCH RESEND v2 1/2 dt-bindings: arm: rockchip: Add NanoPC T6
Add the NanoPC T6, a single board computer from FriendlyElec
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -227,6 +227,11 @@ properties: - friendlyarm,nanopi-r5s - const: rockchip,rk3568 + - description: FriendlyElec NanoPC T6 + items: + - const: friendlyarm,nanopc-t6 + - const: rockchip,rk3588 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox
Signature · 1 line
2.34.1
PATCH RESEND v2 2/2 arm64: dts: rockchip: Add NanoPC T6
In reply to Thomas McKahanAdd the NanoPC T6, a single board computer from FriendlyElec based on the RK3588.
Initial device tree supports debug UART, SD, eMMC, PCIe 3, PMIC, and 40 pin GPIO assignments.
--- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3588-nanopc-t6.dts | 842 ++++++++++++++++++ 2 files changed, 843 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts new file +842 -0
842 lines not on this page · raw message
Signature · 1 line
2.34.1
Quoted 6 lines · Thomas McKahan
This adds support for the RK3588-based NanoPC T6 single board computer. Note this series is dependent on the PCIe 3 support [0] being upstreamed. The NanoPC T6 uses PCIe3x4 like the Rock 5B and EVB1.
Quoted 8 lines
v2:
- remove unnecessary "okay" status from sound
- add '-regulator' suffix on 2 regulators that were missing them
- use generic node name for rtc
- remove extra lines
- fix alignment in I2S entry[...]
Applied, thanks!
[1/2] dt-bindings: arm: rockchip: Add NanoPC T6
commit: 99c81c127408e6b2e4725303fc2e0a09616877ce
[2/2] arm64: dts: rockchip: Add NanoPC T6
commit: 893c17716d0cf68f5ff4dc71c90e0c2bd1f7da46Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>