Skip to contentSkip to conversation

kconfig: port qconf to work with Qt6 in addition to Qt5

PATCH In review Boris Kolpackov 2 participants 3 messages Aug 9, 2023 – Aug 16, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover kconfig: port qconf to work with Qt6 in addition to Qt5

This patch ports qconf to work with Qt6 in addition to latest Qt5. Tested with Qt5 5.15 and Qt6 6.4. Note that earlier versions of Qt5 are no longer guaranteed to work.

Compared to the v1 patch version, v2 also changes qconf-cfg.sh to first look for Qt6 and fallback to Qt5.

Compared to the v2 patch version, v3 forces C++17 in qconf-cfg.sh for Qt6.

Boris Kolpackov (1):
kconfig: port qconf to work with Qt6 in addition to Qt5

 scripts/kconfig/qconf-cfg.sh | 25 +++++++++++++++-------
 scripts/kconfig/qconf.cc     | 40 +++++++++++++++++++++++-------------
 2 files changed, 44 insertions(+), 21 deletions(-)

--
2.40.1

#1 lore raw

PATCH v3 1/1 kconfig: port qconf to work with Qt6 in addition to Qt5

Tested with Qt5 5.15 and Qt6 6.4. Note that earlier versions of Qt5 are no longer guaranteed to work.

---
 scripts/kconfig/qconf-cfg.sh | 25 +++++++++++++++-------
 scripts/kconfig/qconf.cc     | 40 +++++++++++++++++++++++-------------
 2 files changed, 44 insertions(+), 21 deletions(-)
scripts/kconfig/qconf-cfg.sh +18 -7
index 117f36e56..0e113b0f2 100755
@@ -5,7 +5,8 @@ cflags=$1
 libs=$2
 bin=$3
 
-PKG="Qt5Core Qt5Gui Qt5Widgets"
+PKG5="Qt5Core Qt5Gui Qt5Widgets"
+PKG6="Qt6Core Qt6Gui Qt6Widgets"
 
 if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	echo >&2 "*"
@@ -14,16 +15,26 @@ if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
 	exit 1
 fi
 
-if ${HOSTPKG_CONFIG} --exists $PKG; then
-	${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags}
-	${HOSTPKG_CONFIG} --libs ${PKG} > ${libs}
+if ${HOSTPKG_CONFIG} --exists $PKG6; then
+	${HOSTPKG_CONFIG} --cflags ${PKG6} > ${cflags}
+	# Qt6 requires C++17.
+	echo -std=c++17 >> ${cflags}
+	${HOSTPKG_CONFIG} --libs ${PKG6} > ${libs}
+	${HOSTPKG_CONFIG} --variable=libexecdir Qt6Core > ${bin}
+	exit 0
+fi
+
+if ${HOSTPKG_CONFIG} --exists $PKG5; then
+	${HOSTPKG_CONFIG} --cflags ${PKG5} > ${cflags}
+	${HOSTPKG_CONFIG} --libs ${PKG5} > ${libs}
 	${HOSTPKG_CONFIG} --variable=host_bins Qt5Core > ${bin}
 	exit 0
 fi
 
 echo >&2 "*"
-echo >&2 "* Could not find Qt5 via ${HOSTPKG_CONFIG}."
-echo >&2 "* Please install Qt5 and make sure it's in PKG_CONFIG_PATH"
-echo >&2 "* You need $PKG"
+echo >&2 "* Could not find Qt6 or Qt5 via ${HOSTPKG_CONFIG}."
+echo >&2 "* Please install Qt6 or Qt5 and make sure it's in PKG_CONFIG_PATH"
+echo >&2 "* You need $PKG6 for Qt6"
+echo >&2 "* You need $PKG5 for Qt5"
 echo >&2 "*"
 exit 1
scripts/kconfig/qconf.cc +26 -14
index 78087b2d9..3a4d7a19e 100644
@@ -5,10 +5,11 @@
  */
 
 #include <QAction>
+#include <QActionGroup>
 #include <QApplication>
 #include <QCloseEvent>
 #include <QDebug>
-#include <QDesktopWidget>
+#include <QScreen>
 #include <QFileDialog>
 #include <QLabel>
 #include <QLayout>
@@ -17,6 +18,7 @@
 #include <QMenuBar>
 #include <QMessageBox>
 #include <QToolBar>
+#include <QRegularExpression>
 
 #include <stdlib.h>
 
@@ -1126,7 +1128,7 @@ QString ConfigInfoView::debug_info(struct symbol *sym)
 
 QString ConfigInfoView::print_filter(const QString &str)
 {
-	QRegExp re("[<>&\"\\n]");
+	QRegularExpression re("[<>&\"\\n]");
 	QString res = str;
 	for (int i = 0; (i = res.indexOf(re, i)) >= 0;) {
 		switch (res[i].toLatin1()) {
@@ -1322,15 +1324,15 @@ ConfigMainWindow::ConfigMainWindow(void)
 	int width, height;
 	char title[256];
 
-	QDesktopWidget *d = configApp->desktop();
 	snprintf(title, sizeof(title), "%s%s",
 		rootmenu.prompt->text,
 		""
 		);
 	setWindowTitle(title);
 
-	width = configSettings->value("/window width", d->width() - 64).toInt();
-	height = configSettings->value("/window height", d->height() - 64).toInt();
+	QRect g = configApp->primaryScreen()->geometry();
+	width = configSettings->value("/window width", g.width() - 64).toInt();
+	height = configSettings->value("/window height", g.height() - 64).toInt();
 	resize(width, height);
 	x = configSettings->value("/window x");
 	y = configSettings->value("/window y");
@@ -1379,17 +1381,17 @@ ConfigMainWindow::ConfigMainWindow(void)
 		this, &ConfigMainWindow::goBack);
 
 	QAction *quitAction = new QAction("&Quit", this);
-	quitAction->setShortcut(Qt::CTRL + Qt::Key_Q);
+	quitAction->setShortcut(Qt::CTRL | Qt::Key_Q);
 	connect(quitAction, &QAction::triggered,
 		this, &ConfigMainWindow::close);
 
 	QAction *loadAction = new QAction(QPixmap(xpm_load), "&Load", this);
-	loadAction->setShortcut(Qt::CTRL + Qt::Key_L);
+	loadAction->setShortcut(Qt::CTRL | Qt::Key_L);
 	connect(loadAction, &QAction::triggered,
 		this, &ConfigMainWindow::loadConfig);
 
 	saveAction = new QAction(QPixmap(xpm_save), "&Save", this);
-	saveAction->setShortcut(Qt::CTRL + Qt::Key_S);
+	saveAction->setShortcut(Qt::CTRL | Qt::Key_S);
 	connect(saveAction, &QAction::triggered,
 		this, &ConfigMainWindow::saveConfig);
 
@@ -1403,7 +1405,7 @@ ConfigMainWindow::ConfigMainWindow(void)
 	connect(saveAsAction, &QAction::triggered,
 		this, &ConfigMainWindow::saveConfigAs);
 	QAction *searchAction = new QAction("&Find", this);
-	searchAction->setShortcut(Qt::CTRL + Qt::Key_F);
+	searchAction->setShortcut(Qt::CTRL | Qt::Key_F);
 	connect(searchAction, &QAction::triggered,
 		this, &ConfigMainWindow::searchConfig);
 	singleViewAction = new QAction(QPixmap(xpm_single_view), "Single View", this);
@@ -1750,11 +1752,21 @@ void ConfigMainWindow::closeEvent(QCloseEvent* e)
 		e->accept();
 		return;
 	}
-	QMessageBox mb("qconf", "Save configuration?", QMessageBox::Warning,
-			QMessageBox::Yes | QMessageBox::Default, QMessageBox::No, QMessageBox::Cancel | QMessageBox::Escape);
-	mb.setButtonText(QMessageBox::Yes, "&Save Changes");
-	mb.setButtonText(QMessageBox::No, "&Discard Changes");
-	mb.setButtonText(QMessageBox::Cancel, "Cancel Exit");
+
+	QMessageBox mb(QMessageBox::Icon::Warning, "qconf",
+		       "Save configuration?");
+
+	QPushButton *yb = mb.addButton(QMessageBox::Yes);
+	QPushButton *db = mb.addButton(QMessageBox::No);
+	QPushButton *cb = mb.addButton(QMessageBox::Cancel);
+
+	yb->setText("&Save Changes");
+	db->setText("&Discard Changes");
+	cb->setText("Cancel Exit");
+
+	mb.setDefaultButton(yb);
+	mb.setEscapeButton(cb);
+
 	switch (mb.exec()) {
 	case QMessageBox::Yes:
 		if (saveConfig())
Signature · 1 line
2.40.1
#2 lore raw
Quoted 5 lines · Boris Kolpackov

Tested with Qt5 5.15 and Qt6 6.4. Note that earlier versions of Qt5 are no longer guaranteed to work.

Applied to linux-kbuild. Thanks.

I sorted the include directives alphabetically.

The following is the diff from your original patch.

scripts/kconfig/qconf.cc +2 -2
index 3a4d7a19e800..620a3527c767 100644
@@ -9,7 +9,6 @@
 #include <QApplication>
 #include <QCloseEvent>
 #include <QDebug>
-#include <QScreen>
 #include <QFileDialog>
 #include <QLabel>
 #include <QLayout>
@@ -17,8 +16,9 @@
 #include <QMenu>
 #include <QMenuBar>
 #include <QMessageBox>
-#include <QToolBar>
 #include <QRegularExpression>
+#include <QScreen>
+#include <QToolBar>
 
 #include <stdlib.h>
 

--
Best Regards
Masahiro Yamada