DC Patches August 11, 2023
Subsystems (5)
cover DC Patches August 11, 2023
This DC patchset brings improvements in multiple areas. In summary, we have:
- Improve power saving feature
- Clean up for code clarity
- Fix MST issues in system resume
- Fix crashing bug
- Fix pipe allocation for older ASIC
- Fix for gamut remap
- Fix 8K 60Hz display in test cases
- Fix bug in clock gating
- Improve DP2 compliance
Alvin Lee (2):
drm/amd/display: Enable subvp high refresh up to 175hz drm/amd/display: PMFW to wait for DMCUB ack for FPO cases
Anthony Koo (1):
drm/amd/display: [FW Promotion] Release 0.0.179.0
Aric Cyr (1):
drm/amd/display: Promote DAL to 3.2.247
Aurabindo Pillai (3):
drm/amd/display: Add some missing register definitions drm/amd/display: enable low power mode for VGA memory drm/amd/display: Remove freesync video mode amdgpu parameter
Charlene Liu (1):
drm/amd/display: avoid crash and add z8_marks related in dml
Krunoslav Kovac (1):
drm/amd/display: Gamut remap only changes missed
Michael Strauss (1):
drm/amd/display: Support Compliance Test Pattern Generation with DP2
Retimer
Muhammad Ahmed (1):
drm/amd/display: disable clock gating logic reversed bug fix
Nicholas Susanto (1):
drm/amd/display: Enable 8k60hz mode on single display
Wayne Lin (1):
drm/amd/display: Adjust the resume flow
Wenjing Liu (2):
drm/amd/display: fix incorrect stream_res allocation for older ASIC drm/amd/display: implement pipe type definition and adding accessors
drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 - drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 27 -- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 185 +++++++---- .../display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 5 + .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c | 7 + .../dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h | 1 + drivers/gpu/drm/amd/display/dc/core/dc.c | 41 +-- .../gpu/drm/amd/display/dc/core/dc_resource.c | 194 ++++++----- .../gpu/drm/amd/display/dc/core/dc_stream.c | 2 +- drivers/gpu/drm/amd/display/dc/dc.h | 3 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 22 +- .../gpu/drm/amd/display/dc/dce/dce_hwseq.h | 69 ++-- .../amd/display/dc/dce100/dce100_resource.c | 2 +- .../amd/display/dc/dce110/dce110_resource.c | 2 +- .../amd/display/dc/dce112/dce112_resource.c | 4 +- .../drm/amd/display/dc/dcn10/dcn10_resource.c | 6 +- .../drm/amd/display/dc/dcn20/dcn20_hwseq.c | 1 + .../drm/amd/display/dc/dcn20/dcn20_resource.c | 41 ++- .../amd/display/dc/dcn201/dcn201_resource.c | 4 +- .../drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 + .../drm/amd/display/dc/dcn30/dcn30_resource.c | 3 +- .../drm/amd/display/dc/dcn31/dcn31_hubbub.c | 4 +- .../drm/amd/display/dc/dcn31/dcn31_resource.c | 4 +- .../amd/display/dc/dcn314/dcn314_resource.c | 8 +- .../drm/amd/display/dc/dcn32/dcn32_hubbub.c | 4 +- .../drm/amd/display/dc/dcn32/dcn32_hwseq.c | 12 +- .../drm/amd/display/dc/dcn32/dcn32_resource.c | 4 +- .../display/dc/dcn32/dcn32_resource_helpers.c | 12 +- .../drm/amd/display/dc/dml/calcs/dce_calcs.c | 2 +- .../drm/amd/display/dc/dml/calcs/dcn_calcs.c | 2 +- .../drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 2 +- .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 16 +- .../gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 2 + drivers/gpu/drm/amd/display/dc/inc/link.h | 4 + drivers/gpu/drm/amd/display/dc/inc/resource.h | 220 ++++++++++++- drivers/gpu/drm/amd/display/dc/link/Makefile | 3 +- .../display/dc/link/accessories/link_dp_cts.c | 6 +- .../amd/display/dc/link/hwss/link_hwss_dio.c | 2 +- .../amd/display/dc/link/hwss/link_hwss_dio.h | 3 + .../hwss/link_hwss_dio_fixed_vs_pe_retimer.c | 200 ++++++++++++ .../hwss/link_hwss_dio_fixed_vs_pe_retimer.h | 37 +++ .../display/dc/link/hwss/link_hwss_hpo_dp.c | 22 +- .../display/dc/link/hwss/link_hwss_hpo_dp.h | 28 +- .../link_hwss_hpo_fixed_vs_pe_retimer_dp.c | 229 +++++++++++++ .../link_hwss_hpo_fixed_vs_pe_retimer_dp.h | 33 ++ .../gpu/drm/amd/display/dc/link/link_dpms.c | 7 +- .../drm/amd/display/dc/link/link_factory.c | 1 + .../amd/display/dc/link/protocols/link_ddc.c | 82 +++++ .../amd/display/dc/link/protocols/link_ddc.h | 14 + .../link_dp_training_fixed_vs_pe_retimer.c | 305 +++++------------- .../gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 + .../include/asic_reg/dcn/dcn_3_0_0_offset.h | 5 + .../include/asic_reg/dcn/dcn_3_0_0_sh_mask.h | 5 + .../include/asic_reg/dcn/dcn_3_0_2_offset.h | 4 + .../include/asic_reg/dcn/dcn_3_0_2_sh_mask.h | 5 +- 55 files changed, 1356 insertions(+), 560 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.c create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.h create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.h
Signature · 1 line
2.41.0
PATCH 1/15 drm/amd/display: Support Compliance Test Pattern Generation with DP2 Retimer
From: Michael Strauss <[email protected]>
[WHY]
Certain retimer requires workarounds in order to correctly output test patterns.
[HOW]
Add vendor-specific aux sequences to program retimer's TX and pattern generator when specific compliance test patterns are requested by sink.
Note: SQ128 w/a in DPMF mode only works in one flip orientation currently
--- .../gpu/drm/amd/display/dc/core/dc_resource.c | 8 +- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/inc/link.h | 4 + drivers/gpu/drm/amd/display/dc/link/Makefile | 3 +- .../display/dc/link/accessories/link_dp_cts.c | 3 + .../amd/display/dc/link/hwss/link_hwss_dio.c | 2 +- .../amd/display/dc/link/hwss/link_hwss_dio.h | 3 + .../hwss/link_hwss_dio_fixed_vs_pe_retimer.c | 200 ++++++++++++ .../hwss/link_hwss_dio_fixed_vs_pe_retimer.h | 37 +++ .../display/dc/link/hwss/link_hwss_hpo_dp.c | 22 +- .../display/dc/link/hwss/link_hwss_hpo_dp.h | 28 +- .../link_hwss_hpo_fixed_vs_pe_retimer_dp.c | 229 +++++++++++++ .../link_hwss_hpo_fixed_vs_pe_retimer_dp.h | 33 ++ .../drm/amd/display/dc/link/link_factory.c | 1 + .../amd/display/dc/link/protocols/link_ddc.c | 82 +++++ .../amd/display/dc/link/protocols/link_ddc.h | 14 + .../link_dp_training_fixed_vs_pe_retimer.c | 305 +++++------------- 17 files changed, 738 insertions(+), 237 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.c create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.h create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c create mode 100644 drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.h
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +6 -2
@@ -45,6 +45,8 @@#include "link/hwss/link_hwss_dio.h" #include "link/hwss/link_hwss_dpia.h" #include "link/hwss/link_hwss_hpo_dp.h" +#include "link/hwss/link_hwss_dio_fixed_vs_pe_retimer.h" +#include "link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.h" #if defined(CONFIG_DRM_AMD_DC_SI )#include "dce60/dce60_resource.h"
@@ -4198,11 +4200,13 @@ const struct link_hwss *get_link_hwss(const struct dc_link *link,* with an hpo encoder. Or we can return a very dummy one that doesn't * do work for all functions */ -return get_hpo_dp_link_hwss (); +return (requires_fixed_vs_pe_retimer_hpo_link_hwss (link) ? +get_hpo_fixed_vs_pe_retimer_dp_link_hwss () :get_hpo_dp_link_hwss ()); else if (can_use_dpia_link_hwss(link, link_res)) return get_dpia_link_hwss(); else if (can_use_dio_link_hwss(link, link_res)) - return get_dio_link_hwss(); + return (requires_fixed_vs_pe_retimer_dio_link_hwss(link)) ? + get_dio_fixed_vs_pe_retimer_link_hwss() : get_dio_link_hwss(); else return get_virtual_link_hwss(); }
drivers/gpu/drm/amd/display/dc/dc.h +1 -0
@@ -1498,6 +1498,7 @@ struct dc_link {enum engine_id eng_id;bool test_pattern_enabled; +enum dp_test_pattern current_test_pattern;union compliance_test_state compliance_test_state;void *priv;
drivers/gpu/drm/amd/display/dc/inc/link.h +4 -0
@@ -179,6 +179,10 @@ struct link_service {int (*aux_transfer_raw)(struct ddc_service *ddc,struct aux_payload *payload,enum aux_return_code_type *operation_result); +bool (*configure_fixed_vs_pe_retimer)( +struct ddc_service *ddc, +const uint8_t *data, +uint32_t len);bool (*aux_transfer_with_retries_no_mutex)(struct ddc_service *ddc,struct aux_payload *payload);bool (*is_in_aux_transaction_mode)(struct ddc_service *ddc);
drivers/gpu/drm/amd/display/dc/link/Makefile +2 -1
@@ -42,7 +42,8 @@ AMD_DISPLAY_FILES += $(AMD_DAL_LINK_ACCESSORIES) ############################################################################### # hwss ############################################################################### -LINK_HWSS = link_hwss_dio.o link_hwss_dpia.o link_hwss_hpo_dp.o +LINK_HWSS = link_hwss_dio.o link_hwss_dpia.o link_hwss_hpo_dp.o \ +link_hwss_dio_fixed_vs_pe_retimer.o link_hwss_hpo_fixed_vs_pe_retimer_dp.o AMD_DAL_LINK_HWSS = $(addprefix $(AMDDALPATH)/dc/link/hwss/, \ $(LINK_HWSS))
drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c +3 -0
@@ -703,6 +703,7 @@ bool dp_set_test_pattern(/* Reset Test Pattern state */ link->test_pattern_enabled = false; + link->current_test_pattern = test_pattern;return true; }
@@ -740,6 +741,7 @@ bool dp_set_test_pattern(if (test_pattern !=DP_TEST_PATTERN_VIDEO_MODE ) {/* Set Test Pattern state */ link->test_pattern_enabled = true; + link->current_test_pattern = test_pattern;if (p_link_settings !=NULL )dpcd_set_link_settings (link, p_link_settings);
@@ -938,6 +940,7 @@ bool dp_set_test_pattern(/* Set Test Pattern state */ link->test_pattern_enabled = true; + link->current_test_pattern = test_pattern; }return true;
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.c +1 -1
@@ -166,7 +166,7 @@ void set_dio_dp_lane_settings(struct dc_link *link, link_enc->funcs->dp_set_lane_settings (link_enc, link_settings, lane_settings); } -static void update_dio_stream_allocation_table (struct dc_link *link, +void update_dio_stream_allocation_table (struct dc_link *link,const struct link_resource *link_res,const struct link_mst_stream_allocation_table *table) {
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h +3 -0
@@ -55,5 +55,8 @@ void setup_dio_audio_output(struct pipe_ctx *pipe_ctx, struct audio_output *audio_output, uint32_t audio_inst);void enable_dio_audio_packet (struct pipe_ctx *pipe_ctx);void disable_dio_audio_packet (struct pipe_ctx *pipe_ctx); +void update_dio_stream_allocation_table (struct dc_link *link, +const struct link_resource *link_res, +const struct link_mst_stream_allocation_table *table);#endif /* __LINK_HWSS_DIO_H__ */
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.c new file +200 -0
200 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio_fixed_vs_pe_retimer.h new file +37 -0
@@ -0,0 +1,37 @@ +/* +* Copyright 2023 Advanced Micro Devices, Inc. +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: AMD +* +*/ +#ifndef __LINK_HWSS_DIO_FIXED_VS_PE_RETIMER_H__ +#define __LINK_HWSS_DIO_FIXED_VS_PE_RETIMER_H__ + +#include "link.h" + +uint32_t dp_dio_fixed_vs_pe_retimer_get_lttpr_write_address (struct dc_link *link); +uint8_t dp_dio_fixed_vs_pe_retimer_lane_cfg_to_hw_cfg (struct dc_link *link); +void dp_dio_fixed_vs_pe_retimer_exit_manual_automation (struct dc_link *link); +void enable_dio_fixed_vs_pe_retimer_program_4lane_output (struct dc_link *link); +bool requires_fixed_vs_pe_retimer_dio_link_hwss (const struct dc_link *link); +const struct link_hwss *get_dio_fixed_vs_pe_retimer_link_hwss (void ); + +#endif /* __LINK_HWSS_DIO_FIXED_VS_PE_RETIMER_H__ */
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c +11 -11
@@ -28,7 +28,7 @@#include "dccg.h" #include "clk_mgr.h" -static void set_hpo_dp_throttled_vcp_size (struct pipe_ctx *pipe_ctx, +void set_hpo_dp_throttled_vcp_size (struct pipe_ctx *pipe_ctx,struct fixed31_32 throttled_vcp_size) { struct hpo_dp_stream_encoder *hpo_dp_stream_encoder =
@@ -41,7 +41,7 @@ static void set_hpo_dp_throttled_vcp_size(struct pipe_ctx *pipe_ctx, throttled_vcp_size); } -static void set_hpo_dp_hblank_min_symbol_width (struct pipe_ctx *pipe_ctx, +void set_hpo_dp_hblank_min_symbol_width (struct pipe_ctx *pipe_ctx,const struct dc_link_settings *link_settings,struct fixed31_32 throttled_vcp_size) {
@@ -69,7 +69,7 @@ static void set_hpo_dp_hblank_min_symbol_width(struct pipe_ctx *pipe_ctx, hblank_min_symbol_width); } -static void setup_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx) +void setup_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx) {struct hpo_dp_stream_encoder *stream_enc = pipe_ctx->stream_res.hpo_dp_stream_enc;struct hpo_dp_link_encoder *link_enc = pipe_ctx->link_res.hpo_dp_link_enc;
@@ -78,14 +78,14 @@ static void setup_hpo_dp_stream_encoder(struct pipe_ctx *pipe_ctx) stream_enc->funcs->map_stream_to_link (stream_enc, stream_enc->inst, link_enc->inst); } -static void reset_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx) +void reset_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx) {struct hpo_dp_stream_encoder *stream_enc = pipe_ctx->stream_res.hpo_dp_stream_enc; stream_enc->funcs->disable (stream_enc); } -static void setup_hpo_dp_stream_attribute (struct pipe_ctx *pipe_ctx) +void setup_hpo_dp_stream_attribute (struct pipe_ctx *pipe_ctx) {struct hpo_dp_stream_encoder *stream_enc = pipe_ctx->stream_res.hpo_dp_stream_enc;struct dc_stream_state *stream = pipe_ctx->stream;
@@ -102,7 +102,7 @@ static void setup_hpo_dp_stream_attribute(struct pipe_ctx *pipe_ctx) DPCD_SOURCE_SEQ_AFTER_DP_STREAM_ATTR); } -static void enable_hpo_dp_link_output(struct dc_link *link, +void enable_hpo_dp_link_output(struct dc_link *link, const struct link_resource *link_res, enum signal_type signal, enum clock_source_id clock_source,
@@ -120,7 +120,7 @@ static void enable_hpo_dp_link_output(struct dc_link *link, link->link_enc->hpd_source); } -static void disable_hpo_dp_link_output (struct dc_link *link, +void disable_hpo_dp_link_output (struct dc_link *link,const struct link_resource *link_res,enum signal_type signal) {
@@ -154,7 +154,7 @@ static void set_hpo_dp_lane_settings(struct dc_link *link, lane_settings[0].FFE_PRESET.raw); } -static void update_hpo_dp_stream_allocation_table (struct dc_link *link, +void update_hpo_dp_stream_allocation_table (struct dc_link *link,const struct link_resource *link_res,const struct link_mst_stream_allocation_table *table) {
@@ -163,7 +163,7 @@ static void update_hpo_dp_stream_allocation_table(struct dc_link *link, table); } -static void setup_hpo_dp_audio_output (struct pipe_ctx *pipe_ctx, +void setup_hpo_dp_audio_output (struct pipe_ctx *pipe_ctx,struct audio_output *audio_output,uint32_t audio_inst) { pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_audio_setup(
@@ -172,13 +172,13 @@ static void setup_hpo_dp_audio_output(struct pipe_ctx *pipe_ctx, &pipe_ctx->stream->audio_info); } -static void enable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx) +void enable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx) { pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_audio_enable ( pipe_ctx->stream_res.hpo_dp_stream_enc); } -static void disable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx) +void disable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx) {if (pipe_ctx->stream_res.audio) pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_audio_disable(
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.h +27 -1
@@ -28,9 +28,35 @@#include "link_hwss.h" #include "link.h" +void set_hpo_dp_throttled_vcp_size (struct pipe_ctx *pipe_ctx, +struct fixed31_32 throttled_vcp_size); +void set_hpo_dp_hblank_min_symbol_width (struct pipe_ctx *pipe_ctx, +const struct dc_link_settings *link_settings, +struct fixed31_32 throttled_vcp_size); +void set_hpo_dp_hblank_min_symbol_width (struct pipe_ctx *pipe_ctx, +const struct dc_link_settings *link_settings, +struct fixed31_32 throttled_vcp_size); +void setup_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx); +void reset_hpo_dp_stream_encoder (struct pipe_ctx *pipe_ctx); +void setup_hpo_dp_stream_attribute (struct pipe_ctx *pipe_ctx); +void enable_hpo_dp_link_output (struct dc_link *link, +const struct link_resource *link_res, +enum signal_type signal, +enum clock_source_id clock_source, +const struct dc_link_settings *link_settings); +void disable_hpo_dp_link_output (struct dc_link *link, +const struct link_resource *link_res, +enum signal_type signal); +void update_hpo_dp_stream_allocation_table (struct dc_link *link, +const struct link_resource *link_res, +const struct link_mst_stream_allocation_table *table); +void setup_hpo_dp_audio_output (struct pipe_ctx *pipe_ctx, +struct audio_output *audio_output,uint32_t audio_inst); +void enable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx); +void disable_hpo_dp_audio_packet (struct pipe_ctx *pipe_ctx); +const struct link_hwss *get_hpo_dp_link_hwss (void );bool can_use_hpo_dp_link_hwss (const struct dc_link *link,const struct link_resource *link_res); -const struct link_hwss *get_hpo_dp_link_hwss (void );#endif /* __LINK_HWSS_HPO_DP_H__ */
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.c new file +229 -0
229 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_fixed_vs_pe_retimer_dp.h new file +33 -0
@@ -0,0 +1,33 @@ +/* +* Copyright 2023 Advanced Micro Devices, Inc. +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR +* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Authors: AMD +* +*/ +#ifndef __LINK_HWSS_HPO_FIXED_VS_PE_RETIMER_DP_H__ +#define __LINK_HWSS_HPO_FIXED_VS_PE_RETIMER_DP_H__ + +#include "link.h" + +bool requires_fixed_vs_pe_retimer_hpo_link_hwss (const struct dc_link *link); +const struct link_hwss *get_hpo_fixed_vs_pe_retimer_dp_link_hwss (void ); + +#endif /* __LINK_HWSS_HPO_FIXED_VS_PE_RETIMER_DP_H__ */
drivers/gpu/drm/amd/display/dc/link/link_factory.c +1 -0
@@ -132,6 +132,7 @@ static void construct_link_service_ddc(struct link_service *link_srv) link_srv->destroy_ddc_service = link_destroy_ddc_service; link_srv->query_ddc_data = link_query_ddc_data; link_srv->aux_transfer_raw = link_aux_transfer_raw; + link_srv->configure_fixed_vs_pe_retimer = link_configure_fixed_vs_pe_retimer; link_srv->aux_transfer_with_retries_no_mutex = link_aux_transfer_with_retries_no_mutex; link_srv->is_in_aux_transaction_mode = link_is_in_aux_transaction_mode;
drivers/gpu/drm/amd/display/dc/link/protocols/link_ddc.c +82 -0
88 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/link/protocols/link_ddc.h +14 -0
@@ -72,6 +72,20 @@ bool link_query_ddc_data(bool link_aux_transfer_with_retries_no_mutex (struct ddc_service *ddc,struct aux_payload *payload); +bool link_configure_fixed_vs_pe_retimer ( +struct ddc_service *ddc, +const uint8_t *data, +uint32_t length); + +bool link_query_fixed_vs_pe_retimer ( +struct ddc_service *ddc, +uint8_t *data, +uint32_t length); + +uint32_t link_get_fixed_vs_pe_retimer_read_address (struct dc_link *link); +uint32_t link_get_fixed_vs_pe_retimer_write_address (struct dc_link *link); + + void write_scdc_data( struct ddc_service *ddc_service, uint32_t pix_clk,
drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c +84 -221
462 lines not on this page · raw message
Signature · 1 line
2.41.0
PATCH 2/15 drm/amd/display: disable clock gating logic reversed bug fix
In reply to Stylon WangFrom: Muhammad Ahmed <[email protected]>
[Why]
disable clock gating logic reversed bug fix
--- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c +2 -2
@@ -1018,8 +1018,8 @@ void hubbub31_init(struct hubbub *hubbub)/*done in hwseq*/ /*REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);*/ REG_UPDATE_2 (DCHUBBUB_CLOCK_CNTL , -DISPCLK_R_DCHUBBUB_GATE_DIS ,0 , -DCFCLK_R_DCHUBBUB_GATE_DIS ,0 ); +DISPCLK_R_DCHUBBUB_GATE_DIS ,1 , +DCFCLK_R_DCHUBBUB_GATE_DIS ,1 ); }/*
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hubbub.c +2 -2
@@ -955,8 +955,8 @@ void hubbub32_init(struct hubbub *hubbub)/*REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);*/ REG_UPDATE_2 (DCHUBBUB_CLOCK_CNTL , -DISPCLK_R_DCHUBBUB_GATE_DIS ,0 , -DCFCLK_R_DCHUBBUB_GATE_DIS ,0 ); +DISPCLK_R_DCHUBBUB_GATE_DIS ,1 , +DCFCLK_R_DCHUBBUB_GATE_DIS ,1 ); }/* ignore the "df_pre_cstate_req" from the SDP port control.
Signature · 1 line
2.41.0
PATCH 3/15 drm/amd/display: Enable 8k60hz mode on single display
In reply to Stylon WangFrom: Nicholas Susanto <[email protected]>
[Why]
8k60hz compliace test failing because we restrict it single memory channels. Workaround by not restricting it on single displays.
[How]
Adding an additional check to DCN314 to restrict 8k60hz mode if it has more than 1 display connected.
--- drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c +3 -1
@@ -1689,7 +1689,9 @@ static bool filter_modes_for_single_channel_workaround(struct dc *dc, struct dc_state *context) {// Filter 2K@240Hz+8K@24fps above combination timing if memory only has single dimm LPDDR -if (dc->clk_mgr->bw_params->vram_type ==34 && dc->clk_mgr->bw_params->num_channels <2 ) { +if (dc->clk_mgr->bw_params->vram_type ==34 && + dc->clk_mgr->bw_params->num_channels <2 && + context->stream_count >1 ) {int total_phy_pix_clk =0 ;for (int i =0 ; i < context->stream_count; i++)
Signature · 1 line
2.41.0
PATCH 4/15 drm/amd/display: Gamut remap only changes missed
In reply to Stylon WangFrom: Krunoslav Kovac <[email protected]>
[WHY&HOW]
If surface format is dynamically changed within app without changing timing / whole plane, we don't reprogram gamut remap matrix.
Issue example:
Linear FP16 scRGB going to PQ+BT.2020 monitor.
Remap = scRGB->BT.2020
App switches swapchain format to 10-bit PQ+BT.2020.
SW calculates correctly that new Remap = bypass (in=-out=BT.2020). But update not applied in HW.
--- drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c +1 -0
@@ -1638,6 +1638,7 @@ static void dcn20_update_dchubp_dpp(if (pipe_ctx->update_flags.bits.enable || pipe_ctx->update_flags.bits.opp_changed || pipe_ctx->update_flags.bits.plane_changed || pipe_ctx->stream->update_flags.bits.gamut_remap + || plane_state->update_flags.bits.gamut_remap_change || pipe_ctx->stream->update_flags.bits.out_csc) {/* dpp/cm gamut remap*/ dc->hwss.program_gamut_remap (pipe_ctx);
Signature · 1 line
2.41.0
PATCH 5/15 drm/amd/display: Enable subvp high refresh up to 175hz
In reply to Stylon WangFrom: Alvin Lee <[email protected]>
[Description]
Expand the SubVP policy to include up to 175hz displays for better power saving on more display configs.
--- drivers/gpu/drm/amd/display/dc/core/dc_stream.c | 2 +- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc_stream.c +1 -1
@@ -322,7 +322,7 @@ static bool is_subvp_high_refresh_candidate(struct dc_stream_state *stream)* remain in HW cursor mode if there's no cursor update which will * then cause corruption. */ - if ((refresh_rate >= 120 && refresh_rate <= 165 && + if ((refresh_rate >= 120 && refresh_rate <= 175 && stream->timing.v_addressable >= 1440 && stream->timing.v_addressable <= 2160) && (dc->current_state->stream_count > 1 ||
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +3 -2
@@ -37,7 +37,7 @@static const struct subvp_high_refresh_list subvp_high_refresh_list = { .min_refresh =120 , - .max_refresh =165 , + .max_refresh =175 , .res = { {.width =3840 , .height =2160 , }, {.width =3440 , .height =1440 , },
@@ -1064,7 +1064,8 @@ static bool subvp_subvp_admissable(struct dc *dc, }if (subvp_count ==2 && ((min_refresh <120 && max_refresh <120 ) || - (min_refresh >=120 && max_refresh <=165 ))) + (min_refresh >= subvp_high_refresh_list.min_refresh && + max_refresh <= subvp_high_refresh_list.max_refresh))) result = true;return result;
Signature · 1 line
2.41.0
PATCH 6/15 drm/amd/display: PMFW to wait for DMCUB ack for FPO cases
In reply to Stylon WangFrom: Alvin Lee <[email protected]>
[Description]
We want PMFW to wait for DMCUB to ACK the MCLK end message for FPO cases as well.
--- .../gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c | 5 +++++ .../amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c | 7 +++++++ .../amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h | 1 + 3 files changed, 13 insertions(+)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr.c +5 -0
@@ -555,6 +555,11 @@ static void dcn32_update_clocks(struct clk_mgr *clk_mgr_base, } } +if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) +dcn32_smu_wait_for_dmub_ack_mclk (clk_mgr, true); +else +dcn32_smu_wait_for_dmub_ack_mclk (clk_mgr, false); +/* Always update saved value, even if new value not set due to P-State switching unsupported. Also check safe_to_lower for FCLK */ if (safe_to_lower && (clk_mgr_base->clks.fclk_p_state_change_support != clk_mgr_base->clks.fclk_prev_p_state_change_support)) { update_fclk = true;
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.c +7 -0
@@ -139,3 +139,10 @@ unsigned int dcn32_smu_set_hard_min_by_freq(struct clk_mgr_internal *clk_mgr, uireturn response; } + +void dcn32_smu_wait_for_dmub_ack_mclk (struct clk_mgr_internal *clk_mgr,bool enable) +{ +smu_print ("PMFW to wait for DMCUB ack for MCLK : %d\n" , enable); + +dcn32_smu_send_msg_with_param (clk_mgr,0x14 , enable ?1 :0 ,NULL ); +}
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn32/dcn32_clk_mgr_smu_msg.h +1 -0
@@ -43,5 +43,6 @@ void dcn32_smu_set_pme_workaround(struct clk_mgr_internal *clk_mgr);void dcn32_smu_send_cab_for_uclk_message (struct clk_mgr_internal *clk_mgr,unsigned int num_ways);void dcn32_smu_transfer_wm_table_dram_2_smu (struct clk_mgr_internal *clk_mgr);unsigned int dcn32_smu_set_hard_min_by_freq (struct clk_mgr_internal *clk_mgr,uint32_t clk,uint16_t freq_mhz); +void dcn32_smu_wait_for_dmub_ack_mclk (struct clk_mgr_internal *clk_mgr,bool enable);#endif /* __DCN32_CLK_MGR_SMU_MSG_H_ */
Signature · 1 line
2.41.0
PATCH 7/15 drm/amd/display: fix incorrect stream_res allocation for older ASIC
In reply to Stylon WangFrom: Wenjing Liu <[email protected]>
[why]
There is a recent work for developing a new pipe resource allocation policy used for new ASIC. The new code change needs to modify asic independent pipe resource allocation flow and hook up the new allocation policy in asic dependent layer. Unfortunately this change revealed a hidden bug in the old pipe resource allocation sequence used for older asics. In the older version of acquiring pipe for layer, we are always assigning otg master's opp and tg to the newly allocated secondary dpp pipe. This logic is incorrect when the secodnary dpp
pipe is connected to a secondary opp head pipe in ODM combine configuration. Before the recent change, we will overwrite this wrong assignement in asic independent layer again. This covers up the issue. With the recent change, we will no longer cover up this in upper layer and therefore causes wrong tg and opp assignement to the secondary dpp pipe connected to a secondary opp head.
[how]
Always assign tg and opp from its own opp head instead of otg master.
--- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 27 +++++++++---------- 1 file changed, 13 insertions(+), 14 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +13 -14
@@ -2151,28 +2151,27 @@ struct pipe_ctx *dcn20_acquire_free_pipe_for_layer(const struct dc_state *cur_ctx, struct dc_state *new_ctx, const struct resource_pool *pool, - const struct pipe_ctx *opp_head_pipe) + const struct pipe_ctx *opp_head) { struct resource_context *res_ctx = &new_ctx->res_ctx; -struct pipe_ctx *head_pipe =resource_get_head_pipe_for_stream (res_ctx, opp_head_pipe->stream); -struct pipe_ctx *idle_pipe =find_free_secondary_pipe_legacy (res_ctx, pool, head_pipe); +struct pipe_ctx *otg_master =resource_get_head_pipe_for_stream (res_ctx, opp_head->stream); +struct pipe_ctx *sec_dpp_pipe =find_free_secondary_pipe_legacy (res_ctx, pool, otg_master); -if (!head_pipe) -ASSERT (0 ); +ASSERT (otg_master); -if (!idle_pipe) +if (!sec_dpp_pipe)return NULL ; - idle_pipe->stream = head_pipe->stream; - idle_pipe->stream_res.tg = head_pipe->stream_res.tg; - idle_pipe->stream_res.opp = head_pipe->stream_res.opp; + sec_dpp_pipe->stream = opp_head->stream; + sec_dpp_pipe->stream_res.tg = opp_head->stream_res.tg; + sec_dpp_pipe->stream_res.opp = opp_head->stream_res.opp; - idle_pipe->plane_res.hubp = pool->hubps[idle_pipe->pipe_idx]; - idle_pipe->plane_res.ipp = pool->ipps[idle_pipe->pipe_idx]; - idle_pipe->plane_res.dpp = pool->dpps[idle_pipe->pipe_idx]; - idle_pipe->plane_res.mpcc_inst = pool->dpps[idle_pipe->pipe_idx]->inst; + sec_dpp_pipe->plane_res.hubp = pool->hubps[sec_dpp_pipe->pipe_idx]; + sec_dpp_pipe->plane_res.ipp = pool->ipps[sec_dpp_pipe->pipe_idx]; + sec_dpp_pipe->plane_res.dpp = pool->dpps[sec_dpp_pipe->pipe_idx]; + sec_dpp_pipe->plane_res.mpcc_inst = pool->dpps[sec_dpp_pipe->pipe_idx]->inst; -return idle_pipe; +return sec_dpp_pipe; } bool dcn20_get_dcc_compression_cap(const struct dc *dc,
Signature · 1 line
2.41.0
PATCH 8/15 drm/amd/display: Adjust the resume flow
In reply to Stylon WangFrom: Wayne Lin <[email protected]>
[Why]
In current dm_resume, dm->cached_state is restored after link get detected and updated which will cause problems especially for MST case.
In drm_dp_mst_topology_mgr_resume() today, it will resume the mst branch to be ready handling mst mode and also consecutively do the mst topology probing. Which will cause the dirver have chance to fire hotplug event before restoring the old state. Then Userspace will react to the hotplug event based on a wrong state.
[How]
Adjust the resume flow as:
1. restore old state first
2. link detect/topology probing and notify userspace
3. userspace commits new state
For drm_dp_mst_topology_mgr_resume(), it's better to adjust it to pull out topology probing work into a 2nd part procedure of the mst resume. Will have a follow up patch in drm.
--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 185 +++++++++++++----- 1 file changed, 131 insertions(+), 54 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +131 -54
@@ -2334,14 +2334,62 @@ static int dm_late_init(void *handle)return detect_mst_link_for_all_connectors (adev_to_drm (adev)); } +static void resume_mst_branch_status (struct drm_dp_mst_topology_mgr *mgr) +{ +int ret; +u8 guid[16 ]; +u64 tmp64; + +mutex_lock (&mgr->lock); +if (!mgr->mst_primary) + goto out_fail; + +if (drm_dp_read_dpcd_caps (mgr->aux, mgr->dpcd) <0 ) { +drm_dbg_kms (mgr->dev,"dpcd read failed - undocked during suspend?\n" ); + goto out_fail; + } + + ret =drm_dp_dpcd_writeb (mgr->aux,DP_MSTM_CTRL , +DP_MST_EN | +DP_UP_REQ_EN | +DP_UPSTREAM_IS_SRC ); +if (ret <0 ) { +drm_dbg_kms (mgr->dev,"mst write failed - undocked during suspend?\n" ); + goto out_fail; + } + +/* Some hubs forget their guids after they resume */ + ret =drm_dp_dpcd_read (mgr->aux,DP_GUID , guid,16 ); +if (ret !=16 ) { +drm_dbg_kms (mgr->dev,"dpcd read failed - undocked during suspend?\n" ); + goto out_fail; + } + +if (memchr_inv (guid,0 ,16 ) ==NULL ) { + tmp64 =get_jiffies_64 (); +memcpy (&guid[0 ], &tmp64,sizeof (u64)); +memcpy (&guid[8 ], &tmp64,sizeof (u64)); + + ret =drm_dp_dpcd_write (mgr->aux,DP_GUID , guid,16 ); + +if (ret !=16 ) { +drm_dbg_kms (mgr->dev,"check mstb guid failed - undocked during suspend?\n" ); + goto out_fail; + } + } + +memcpy (mgr->mst_primary->guid, guid,16 ); + +out_fail: +mutex_unlock (&mgr->lock); +} +static void s3_handle_mst (struct drm_device *dev,bool suspend) {struct amdgpu_dm_connector *aconnector;struct drm_connector *connector;struct drm_connector_list_iter iter;struct drm_dp_mst_topology_mgr *mgr; -int ret; -bool need_hotplug = false;drm_connector_list_iter_begin (dev, &iter);drm_for_each_connector_iter (connector, &iter) {
@@ -2363,18 +2411,15 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)if (!dp_is_lttpr_present (aconnector->dc_link))try_to_configure_aux_timeout (aconnector->dc_link->ddc,LINK_AUX_DEFAULT_TIMEOUT_PERIOD ); - ret =drm_dp_mst_topology_mgr_resume (mgr, true); -if (ret <0 ) { -dm_helpers_dp_mst_stop_top_mgr (aconnector->dc_link->ctx, - aconnector->dc_link); - need_hotplug = true; - } +/* TODO: move resume_mst_branch_status() into drm mst resume again +* once topology probing work is pulled out from mst resume into mst +* resume 2nd step. mst resume 2nd step should be called after old +* state getting restored (i.e. drm_atomic_helper_resume()). +*/ +resume_mst_branch_status (mgr); } }drm_connector_list_iter_end (&iter); - -if (need_hotplug) -drm_kms_helper_hotplug_event (dev); }static int amdgpu_dm_smu_write_watermarks_table (struct amdgpu_device *adev)
@@ -2751,14 +2796,80 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state,kfree (bundle); } +static void link_detect_and_update_connectors (struct amdgpu_device *adev) +{ +struct drm_device *dev =adev_to_drm (adev); +struct amdgpu_dm_connector *aconnector; +struct drm_connector *connector; +struct drm_connector_list_iter iter; +struct drm_dp_mst_topology_mgr *mgr; +struct amdgpu_display_manager *dm = &adev->dm; +enum dc_connection_type new_connection_type = dc_connection_none; +int ret; + +/* link detection and update. Skip those MST end sink connectors but do +* detection for mst root connectors +*/ +drm_connector_list_iter_begin (dev, &iter); +drm_for_each_connector_iter (connector, &iter) { + aconnector =to_amdgpu_dm_connector (connector); + +if (!aconnector->dc_link) +continue ; + +/* +* this is the case when traversing through created end sink +* MST connectors, should be skipped +*/ +if (aconnector && aconnector->mst_root) +continue ; + +mutex_lock (&aconnector->hpd_lock); +if (!dc_link_detect_connection_type (aconnector->dc_link, &new_connection_type)) +DRM_ERROR ("KMS: Failed to detect connector\n" ); + +if (aconnector->base.force && new_connection_type == dc_connection_none) { +emulated_link_detect (aconnector->dc_link); + }else { +mutex_lock (&dm->dc_lock); +dc_link_detect (aconnector->dc_link,DETECT_REASON_HPD ); +mutex_unlock (&dm->dc_lock); + } + +if (aconnector->fake_enable && aconnector->dc_link->local_sink) + aconnector->fake_enable = false; + +if (aconnector->dc_sink) +dc_sink_release (aconnector->dc_sink); + aconnector->dc_sink =NULL ; +amdgpu_dm_update_connector_after_detect (aconnector); +mutex_unlock (&aconnector->hpd_lock); + } +drm_connector_list_iter_end (&iter); + +/* MST topology probing*/ +drm_connector_list_iter_begin (dev, &iter); +drm_for_each_connector_iter (connector, &iter) { + aconnector =to_amdgpu_dm_connector (connector); +if (aconnector->dc_link->type != dc_connection_mst_branch || + aconnector->mst_root) +continue ; + + mgr = &aconnector->mst_mgr; + + ret =drm_dp_mst_topology_mgr_resume (mgr, true); +if (ret <0 ) +dm_helpers_dp_mst_stop_top_mgr (aconnector->dc_link->ctx, + aconnector->dc_link); + } +drm_connector_list_iter_end (&iter); +} +static int dm_resume (void *handle) {struct amdgpu_device *adev = handle;struct drm_device *ddev =adev_to_drm (adev);struct amdgpu_display_manager *dm = &adev->dm; -struct amdgpu_dm_connector *aconnector; -struct drm_connector *connector; -struct drm_connector_list_iter iter;struct drm_crtc *crtc;struct drm_crtc_state *new_crtc_state;struct dm_crtc_state *dm_new_crtc_state;
@@ -2766,7 +2877,6 @@ static int dm_resume(void *handle)struct drm_plane_state *new_plane_state;struct dm_plane_state *dm_new_plane_state;struct dm_atomic_state *dm_state =to_dm_atomic_state (dm->atomic_obj.state); -enum dc_connection_type new_connection_type = dc_connection_none;struct dc_state *dc_state;int i, r, j;
@@ -2857,44 +2967,6 @@ static int dm_resume(void *handle)/* On resume we need to rewrite the MSTM control bits to enable MST*/ s3_handle_mst (ddev, false); -/* Do detection*/ -drm_connector_list_iter_begin (ddev, &iter); -drm_for_each_connector_iter (connector, &iter) { - aconnector =to_amdgpu_dm_connector (connector); - -if (!aconnector->dc_link) -continue ; - -/* -* this is the case when traversing through already created -* MST connectors, should be skipped -*/ -if (aconnector && aconnector->mst_root) -continue ; - -mutex_lock (&aconnector->hpd_lock); -if (!dc_link_detect_connection_type (aconnector->dc_link, &new_connection_type)) -DRM_ERROR ("KMS: Failed to detect connector\n" ); - -if (aconnector->base.force && new_connection_type == dc_connection_none) { -emulated_link_detect (aconnector->dc_link); - }else { -mutex_lock (&dm->dc_lock); -dc_link_detect (aconnector->dc_link,DETECT_REASON_HPD ); -mutex_unlock (&dm->dc_lock); - } - -if (aconnector->fake_enable && aconnector->dc_link->local_sink) - aconnector->fake_enable = false; - -if (aconnector->dc_sink) -dc_sink_release (aconnector->dc_sink); - aconnector->dc_sink =NULL ; -amdgpu_dm_update_connector_after_detect (aconnector); -mutex_unlock (&aconnector->hpd_lock); - } -drm_connector_list_iter_end (&iter); -/* Force mode set in atomic commit */ for_each_new_crtc_in_state (dm->cached_state, crtc, new_crtc_state, i) new_crtc_state->active_changed = true;
@@ -2926,10 +2998,15 @@ static int dm_resume(void *handle) dm->cached_state =NULL ; +/* Do link detection and update to upper layer */ +link_detect_and_update_connectors (adev); + +/* Fire hotplug event anyway */ +drm_kms_helper_hotplug_event (ddev); +amdgpu_dm_irq_resume_late (adev);amdgpu_dm_smu_write_watermarks_table (adev); -return 0 ; }
Signature · 1 line
2.41.0
PATCH 9/15 drm/amd/display: avoid crash and add z8_marks related in dml
In reply to Stylon WangFrom: Charlene Liu <[email protected]>
[why]
add dml1 used calculate_wm_and_dlg function pointer check to prevent crash. add z8 watermarks to struct for later asic use
--- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c | 3 ++- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c | 4 ++-- drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h | 2 ++ 4 files changed, 8 insertions(+), 5 deletions(-)
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_resource.c +2 -1
@@ -2063,7 +2063,8 @@ bool dcn30_validate_bandwidth(struct dc *dc, }DC_FP_START (); - dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel); +if (dc->res_pool->funcs->calculate_wm_and_dlg) + dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel);DC_FP_END ();BW_VAL_TRACE_END_WATERMARKS ();
drivers/gpu/drm/amd/display/dc/dcn31/dcn31_resource.c +2 -2
@@ -1781,8 +1781,8 @@ bool dcn31_validate_bandwidth(struct dc *dc,BW_VAL_TRACE_SKIP (fast); goto validate_out; } - - dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel); +if (dc->res_pool->funcs->calculate_wm_and_dlg) + dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel);BW_VAL_TRACE_END_WATERMARKS ();
drivers/gpu/drm/amd/display/dc/dcn314/dcn314_resource.c +2 -2
@@ -1740,8 +1740,8 @@ bool dcn314_validate_bandwidth(struct dc *dc,BW_VAL_TRACE_SKIP (fast); goto validate_out; } - - dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel); +if (dc->res_pool->funcs->calculate_wm_and_dlg) + dc->res_pool->funcs->calculate_wm_and_dlg (dc, context, pipes, pipe_cnt, vlevel);BW_VAL_TRACE_END_WATERMARKS ();
drivers/gpu/drm/amd/display/dc/inc/hw/dchubbub.h +2 -0
@@ -49,6 +49,8 @@ struct dcn_hubbub_wm_set {uint32_t dram_clk_change;uint32_t usr_retrain;uint32_t fclk_pstate_change; +uint32_t sr_enter_exit_Z8; +uint32_t sr_enter_Z8; };struct dcn_hubbub_wm {
Signature · 1 line
2.41.0
PATCH 10/15 drm/amd/display: implement pipe type definition and adding accessors
In reply to Stylon WangFrom: Wenjing Liu <[email protected]>
[why]
There is a lack of encapsulation of pipe connection representation in pipe context. This has caused many challenging bugs and coding errors with repeated logic to identify the same pipe type.
[how]
Formally define pipe types and provide getters to identify a pipe type and find a pipe based on specific requirements. Update existing logic in non dcn specific files and dcn32 and future versions to use the new accessors.
--- drivers/gpu/drm/amd/display/dc/core/dc.c | 41 +--- .../gpu/drm/amd/display/dc/core/dc_resource.c | 186 ++++++++------- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 22 +- .../amd/display/dc/dce100/dce100_resource.c | 2 +- .../amd/display/dc/dce110/dce110_resource.c | 2 +- .../amd/display/dc/dce112/dce112_resource.c | 4 +- .../drm/amd/display/dc/dcn10/dcn10_resource.c | 6 +- .../drm/amd/display/dc/dcn20/dcn20_resource.c | 18 +- .../amd/display/dc/dcn201/dcn201_resource.c | 4 +- .../drm/amd/display/dc/dcn32/dcn32_hwseq.c | 12 +- .../drm/amd/display/dc/dcn32/dcn32_resource.c | 4 +- .../display/dc/dcn32/dcn32_resource_helpers.c | 12 +- .../drm/amd/display/dc/dml/calcs/dce_calcs.c | 2 +- .../drm/amd/display/dc/dml/calcs/dcn_calcs.c | 2 +- .../drm/amd/display/dc/dml/dcn20/dcn20_fpu.c | 2 +- .../drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 11 +- drivers/gpu/drm/amd/display/dc/inc/resource.h | 220 ++++++++++++++++-- .../display/dc/link/accessories/link_dp_cts.c | 3 +- .../gpu/drm/amd/display/dc/link/link_dpms.c | 7 +- 19 files changed, 375 insertions(+), 185 deletions(-)
drivers/gpu/drm/amd/display/dc/core/dc.c +12 -29
@@ -586,18 +586,15 @@ dc_stream_forward_crc_window(struct dc_stream_state *stream,bool dc_stream_configure_crc (struct dc *dc,struct dc_stream_state *stream,struct crc_params *crc_window,bool enable,bool continuous) { -int i;struct pipe_ctx *pipe;struct crc_params param;struct timing_generator *tg; -for (i =0 ; i <MAX_PIPES ; i++) { - pipe = &dc->current_state->res_ctx.pipe_ctx[i]; -if (pipe->stream == stream && !pipe->top_pipe && !pipe->prev_odm_pipe) -break ; - } + pipe =resource_get_otg_master_for_stream ( + &dc->current_state->res_ctx, stream); +/* Stream not found */ -if (i ==MAX_PIPES ) +if (pipe ==NULL )return false;/* By default, capture the full frame */
@@ -1064,7 +1061,7 @@ static void apply_ctx_interdependent_lock(struct dc *dc,// Copied conditions that were previously in dce110_apply_ctx_for_surface if (stream == pipe_ctx->stream) { -if (!pipe_ctx->top_pipe && +if (resource_is_pipe_type (pipe_ctx,OPP_HEAD ) && (pipe_ctx->plane_state || old_pipe_ctx->plane_state)) dc->hwss.pipe_control_lock (dc, pipe_ctx, lock); }
@@ -3164,7 +3161,7 @@ static void commit_planes_do_stream_update(struct dc *dc,for (j =0 ; j < dc->res_pool->pipe_count; j++) {struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[j]; -if (!pipe_ctx->top_pipe && !pipe_ctx->prev_odm_pipe && pipe_ctx->stream == stream) { +if (resource_is_pipe_type (pipe_ctx,OTG_MASTER ) && pipe_ctx->stream == stream) {if (stream_update->periodic_interrupt && dc->hwss.setup_periodic_interrupt) dc->hwss.setup_periodic_interrupt (dc, pipe_ctx);
@@ -3443,16 +3440,9 @@ static void commit_planes_for_stream_fast(struct dc *dc,struct pipe_ctx *top_pipe_to_program =NULL ;dc_z10_restore (dc); -for (j =0 ; j < dc->res_pool->pipe_count; j++) { -struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[j]; - -if (!pipe_ctx->top_pipe && - !pipe_ctx->prev_odm_pipe && - pipe_ctx->stream && - pipe_ctx->stream == stream) { - top_pipe_to_program = pipe_ctx; - } - } + top_pipe_to_program =resource_get_otg_master_for_stream ( + &context->res_ctx, + stream);if (dc->debug.visual_confirm) {for (i =0 ; i < dc->res_pool->pipe_count; i++) {
@@ -3557,16 +3547,9 @@ static void commit_planes_for_stream(struct dc *dc,context_clock_trace (dc, context); } -for (j =0 ; j < dc->res_pool->pipe_count; j++) { -struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[j]; - -if (!pipe_ctx->top_pipe && - !pipe_ctx->prev_odm_pipe && - pipe_ctx->stream && - pipe_ctx->stream == stream) { - top_pipe_to_program = pipe_ctx; - } - } + top_pipe_to_program =resource_get_otg_master_for_stream ( + &context->res_ctx, + stream);for (i =0 ; i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *old_pipe = &dc->current_state->res_ctx.pipe_ctx[i];
drivers/gpu/drm/amd/display/dc/core/dc_resource.c +100 -86
318 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +12 -10
@@ -31,6 +31,7 @@#include "core_types.h" #include "../basics/conversion.h" #include "cursor_reg_cache.h" +#include "resource.h" #define CTX dc_dmub_srv->ctx#define DC_LOGGER CTX->logger
@@ -356,7 +357,7 @@ bool dc_dmub_srv_p_state_delegate(struct dc *dc, bool should_manage_pstate, strufor (i =0 , k =0 ; context && i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; -if (!pipe->top_pipe && !pipe->prev_odm_pipe && pipe->stream && pipe->stream->fpo_in_use) { +if (resource_is_pipe_type (pipe,OTG_MASTER ) && pipe->stream->fpo_in_use) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];uint8_t min_refresh_in_hz = (pipe->stream->timing.min_refresh_in_uhz +999999 ) /1000000 ;
@@ -531,7 +532,8 @@ static void populate_subvp_cmd_vblank_pipe_info(struct dc *dc,// We check for master pipe, but it shouldn't matter since we only need // the pipe for timing info (stream should be same for any pipe splits) -if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe) +if (!resource_is_pipe_type (pipe,OTG_MASTER ) || + !resource_is_pipe_type (pipe,DPP_PIPE ))continue ;// Find the SubVP pipe
@@ -728,12 +730,10 @@ void dc_dmub_setup_subvp_dmub_command(struct dc *dc,for (i =0 ; i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; -if (!pipe->stream) -continue ; -/* For SubVP pipe count, only count the top most (ODM / MPC) pipe */ -if (pipe->plane_state && !pipe->top_pipe && !pipe->prev_odm_pipe && +if (resource_is_pipe_type (pipe,OTG_MASTER ) && +resource_is_pipe_type (pipe,DPP_PIPE ) && pipe->stream->mall_stream_config.type ==SUBVP_MAIN ) subvp_pipes[subvp_count++] = pipe; }
@@ -750,12 +750,14 @@ void dc_dmub_setup_subvp_dmub_command(struct dc *dc,* Any ODM or MPC splits being used in SubVP will be handled internally in * populate_subvp_cmd_pipe_info */ -if (pipe->plane_state && pipe->stream->mall_stream_config.paired_stream && - !pipe->top_pipe && !pipe->prev_odm_pipe && +if (resource_is_pipe_type (pipe,OTG_MASTER ) && +resource_is_pipe_type (pipe,DPP_PIPE ) && + pipe->stream->mall_stream_config.paired_stream && pipe->stream->mall_stream_config.type ==SUBVP_MAIN ) {populate_subvp_cmd_pipe_info (dc, context, &cmd, pipe, cmd_pipe_index++); - }else if (pipe->plane_state && pipe->stream->mall_stream_config.type ==SUBVP_NONE && - !pipe->top_pipe && !pipe->prev_odm_pipe) { + }else if (resource_is_pipe_type (pipe,OTG_MASTER ) && +resource_is_pipe_type (pipe,DPP_PIPE ) && + pipe->stream->mall_stream_config.type ==SUBVP_NONE ) {// Don't need to check for ActiveDRAMClockChangeMargin < 0, not valid in cases where // we run through DML without calculating "natural" P-state support populate_subvp_cmd_vblank_pipe_info (dc, context, &cmd, pipe, cmd_pipe_index++);
drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c +1 -1
@@ -824,7 +824,7 @@ static enum dc_status build_mapped_resource(struct dc_state *context, struct dc_stream_state *stream) { - struct pipe_ctx *pipe_ctx = resource_get_head_pipe_for_stream(&context->res_ctx, stream); + struct pipe_ctx *pipe_ctx = resource_get_otg_master_for_stream(&context->res_ctx, stream);if (!pipe_ctx)return DC_ERROR_UNEXPECTED ;
drivers/gpu/drm/amd/display/dc/dce110/dce110_resource.c +1 -1
@@ -942,7 +942,7 @@ static enum dc_status build_mapped_resource(struct dc_state *context, struct dc_stream_state *stream) { - struct pipe_ctx *pipe_ctx = resource_get_head_pipe_for_stream(&context->res_ctx, stream); + struct pipe_ctx *pipe_ctx = resource_get_otg_master_for_stream(&context->res_ctx, stream);if (!pipe_ctx)return DC_ERROR_UNEXPECTED ;
drivers/gpu/drm/amd/display/dc/dce112/dce112_resource.c +2 -2
@@ -873,7 +873,7 @@ static enum dc_status build_mapped_resource(struct dc_state *context, struct dc_stream_state *stream) { - struct pipe_ctx *pipe_ctx = resource_get_head_pipe_for_stream(&context->res_ctx, stream); + struct pipe_ctx *pipe_ctx = resource_get_otg_master_for_stream(&context->res_ctx, stream);if (!pipe_ctx)return DC_ERROR_UNEXPECTED ;
@@ -964,7 +964,7 @@ enum dc_status resource_map_phy_clock_resources( {/* acquire new resources */ -struct pipe_ctx *pipe_ctx =resource_get_head_pipe_for_stream ( +struct pipe_ctx *pipe_ctx =resource_get_otg_master_for_stream ( &context->res_ctx, stream);if (!pipe_ctx)
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c +3 -3
@@ -1055,7 +1055,7 @@ static enum dc_status build_mapped_resource(struct dc_state *context, struct dc_stream_state *stream) { - struct pipe_ctx *pipe_ctx = resource_get_head_pipe_for_stream(&context->res_ctx, stream); + struct pipe_ctx *pipe_ctx = resource_get_otg_master_for_stream(&context->res_ctx, stream);if (!pipe_ctx)return DC_ERROR_UNEXPECTED ;
@@ -1090,8 +1090,8 @@ static struct pipe_ctx *dcn10_acquire_free_pipe_for_layer( const struct pipe_ctx *opp_head_pipe) {struct resource_context *res_ctx = &new_ctx->res_ctx; -struct pipe_ctx *head_pipe =resource_get_head_pipe_for_stream (res_ctx, opp_head_pipe->stream); -struct pipe_ctx *idle_pipe =find_free_secondary_pipe_legacy (res_ctx, pool, head_pipe); +struct pipe_ctx *head_pipe =resource_get_otg_master_for_stream (res_ctx, opp_head_pipe->stream); +struct pipe_ctx *idle_pipe =resource_find_free_secondary_pipe_legacy (res_ctx, pool, head_pipe);if (!head_pipe) {ASSERT (0 );
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c +9 -9
@@ -1294,7 +1294,7 @@ static enum dc_status build_pipe_hw_param(struct pipe_ctx *pipe_ctx)enum dc_status dcn20_build_mapped_resource (const struct dc *dc,struct dc_state *context,struct dc_stream_state *stream) {enum dc_status status =DC_OK ; -struct pipe_ctx *pipe_ctx =resource_get_head_pipe_for_stream (&context->res_ctx, stream); +struct pipe_ctx *pipe_ctx =resource_get_otg_master_for_stream (&context->res_ctx, stream);if (!pipe_ctx)return DC_ERROR_UNEXPECTED ;
@@ -1948,7 +1948,7 @@ int dcn20_validate_apply_pipe_split_flags( v->ODMCombineEnablePerState[vlevel][pipe_plane];if (v->ODMCombineEnabled[pipe_plane] == dm_odm_combine_mode_disabled) { -if (get_num_mpc_splits (pipe) ==1 ) { +if (resource_get_num_mpc_splits (pipe) ==1 ) {/*If need split for mpc but 2 way split already*/ if (split[i] ==4 ) split[i] =2 ;/* 2 -> 4 MPC */
@@ -1956,7 +1956,7 @@ int dcn20_validate_apply_pipe_split_flags( split[i] =0 ;/* 2 -> 2 MPC */ else if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state) merge[i] = true;/* 2 -> 1 MPC */ - }else if (get_num_mpc_splits (pipe) ==3 ) { + }else if (resource_get_num_mpc_splits (pipe) ==3 ) {/*If need split for mpc but 4 way split already*/ if (split[i] ==2 && ((pipe->top_pipe && !pipe->top_pipe->top_pipe) || !pipe->bottom_pipe)) {
@@ -1965,7 +1965,7 @@ int dcn20_validate_apply_pipe_split_flags( pipe->top_pipe->plane_state == pipe->plane_state) merge[i] = true; /* 4 -> 1 MPC */ split[i] =0 ; - }else if (get_num_odm_splits (pipe)) { + }else if (resource_get_num_odm_splits (pipe)) {/* ODM -> MPC transition */ if (pipe->prev_odm_pipe) { split[i] =0 ;
@@ -1973,7 +1973,7 @@ int dcn20_validate_apply_pipe_split_flags( } } }else { -if (get_num_odm_splits (pipe) ==1 ) { +if (resource_get_num_odm_splits (pipe) ==1 ) {/*If need split for odm but 2 way split already*/ if (split[i] ==4 ) split[i] =2 ;/* 2 -> 4 ODM */
@@ -1983,7 +1983,7 @@ int dcn20_validate_apply_pipe_split_flags(ASSERT (0 );/* NOT expected yet */ merge[i] = true;/* exit ODM */ } - }else if (get_num_odm_splits (pipe) ==3 ) { + }else if (resource_get_num_odm_splits (pipe) ==3 ) {/*If need split for odm but 4 way split already*/ if (split[i] ==2 && ((pipe->prev_odm_pipe && !pipe->prev_odm_pipe->prev_odm_pipe) || !pipe->next_odm_pipe)) {
@@ -1993,7 +1993,7 @@ int dcn20_validate_apply_pipe_split_flags( merge[i] = true;/* exit ODM */ } split[i] =0 ; - }else if (get_num_mpc_splits (pipe)) { + }else if (resource_get_num_mpc_splits (pipe)) {/* MPC -> ODM transition */ ASSERT (0 );/* NOT expected yet */ if (pipe->top_pipe && pipe->top_pipe->plane_state == pipe->plane_state) {
@@ -2154,8 +2154,8 @@ struct pipe_ctx *dcn20_acquire_free_pipe_for_layer( const struct pipe_ctx *opp_head) {struct resource_context *res_ctx = &new_ctx->res_ctx; -struct pipe_ctx *otg_master =resource_get_head_pipe_for_stream (res_ctx, opp_head->stream); -struct pipe_ctx *sec_dpp_pipe =find_free_secondary_pipe_legacy (res_ctx, pool, otg_master); +struct pipe_ctx *otg_master =resource_get_otg_master_for_stream (res_ctx, opp_head->stream); +struct pipe_ctx *sec_dpp_pipe =resource_find_free_secondary_pipe_legacy (res_ctx, pool, otg_master);ASSERT (otg_master);
drivers/gpu/drm/amd/display/dc/dcn201/dcn201_resource.c +2 -2
@@ -999,8 +999,8 @@ static struct pipe_ctx *dcn201_acquire_free_pipe_for_layer( const struct pipe_ctx *opp_head_pipe) {struct resource_context *res_ctx = &new_ctx->res_ctx; -struct pipe_ctx *head_pipe =resource_get_head_pipe_for_stream (res_ctx, opp_head_pipe->stream); -struct pipe_ctx *idle_pipe =find_free_secondary_pipe_legacy (res_ctx, pool, head_pipe); +struct pipe_ctx *head_pipe =resource_get_otg_master_for_stream (res_ctx, opp_head_pipe->stream); +struct pipe_ctx *idle_pipe =resource_find_free_secondary_pipe_legacy (res_ctx, pool, head_pipe);if (!head_pipe)ASSERT (0 );
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c +6 -6
@@ -567,7 +567,7 @@ bool dcn32_set_output_transfer_func(struct dc *dc,bool ret = false;/* program OGAM or 3DLUT only for the top pipe*/ -if (pipe_ctx->top_pipe ==NULL ) { +if (resource_is_pipe_type (pipe_ctx,OPP_HEAD )) {/*program shaper and 3dlut in MPC*/ ret =dcn32_set_mpc_shaper_3dlut (pipe_ctx, stream);if (ret == false && mpc->funcs->set_output_gamma && stream->out_transfer_func) {
@@ -1202,10 +1202,10 @@ void dcn32_resync_fifo_dccg_dio(struct dce_hwseq *hws, struct dc *dc, struct dc_for (i =0 ; i < dc->res_pool->pipe_count; i++) { pipe = &dc->current_state->res_ctx.pipe_ctx[i]; -if (pipe->top_pipe || pipe->prev_odm_pipe) +if (!resource_is_pipe_type (pipe,OTG_MASTER ))continue ; -if (pipe->stream && (pipe->stream->dpms_off ||dc_is_virtual_signal (pipe->stream->signal)) +if ((pipe->stream->dpms_off ||dc_is_virtual_signal (pipe->stream->signal)) && pipe->stream->mall_stream_config.type !=SUBVP_PHANTOM ) { pipe->stream_res.tg->funcs->disable_crtc (pipe->stream_res.tg);reset_sync_context_for_pipe (dc, context, i);
@@ -1299,7 +1299,7 @@ static void apply_symclk_on_tx_off_wa(struct dc_link *link)if (link->phy_state.symclk_ref_cnts.otg >0 ) {for (i =0 ; i <MAX_PIPES ; i++) { pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i]; -if (pipe_ctx->stream && pipe_ctx->stream->link == link && pipe_ctx->top_pipe ==NULL ) { +if (resource_is_pipe_type (pipe_ctx,OPP_HEAD ) && pipe_ctx->stream->link == link) { pipe_ctx->clock_source->funcs->program_pix_clk( pipe_ctx->clock_source, &pipe_ctx->stream_res.pix_clk_params,
@@ -1382,7 +1382,7 @@ void dcn32_apply_update_flags_for_phantom(struct pipe_ctx *phantom_pipe) { phantom_pipe->update_flags.raw =0 ;if (phantom_pipe->stream && phantom_pipe->stream->mall_stream_config.type ==SUBVP_PHANTOM ) { -if (phantom_pipe->stream && phantom_pipe->plane_state) { +if (resource_is_pipe_type (phantom_pipe,DPP_PIPE )) { phantom_pipe->update_flags.bits.enable =1 ; phantom_pipe->update_flags.bits.mpcc =1 ; phantom_pipe->update_flags.bits.dppclk =1 ;
@@ -1392,7 +1392,7 @@ void dcn32_apply_update_flags_for_phantom(struct pipe_ctx *phantom_pipe) phantom_pipe->update_flags.bits.scaler =1 ; phantom_pipe->update_flags.bits.viewport =1 ; phantom_pipe->update_flags.bits.det_size =1 ; -if (!phantom_pipe->top_pipe && !phantom_pipe->prev_odm_pipe) { +if (resource_is_pipe_type (phantom_pipe,OTG_MASTER )) { phantom_pipe->update_flags.bits.odm =1 ; phantom_pipe->update_flags.bits.global_sync =1 ; }
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource.c +2 -2
@@ -1709,8 +1709,8 @@ void dcn32_retain_phantom_pipes(struct dc *dc, struct dc_state *context)for (i =0 ; i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; -if (!pipe->top_pipe && !pipe->prev_odm_pipe && - pipe->plane_state && pipe->stream && +if (resource_is_pipe_type (pipe,OTG_MASTER ) && +resource_is_pipe_type (pipe,DPP_PIPE ) && pipe->stream->mall_stream_config.type ==SUBVP_PHANTOM ) { phantom_plane = pipe->plane_state; phantom_stream = pipe->stream;
drivers/gpu/drm/amd/display/dc/dcn32/dcn32_resource_helpers.c +4 -8
@@ -646,10 +646,8 @@ bool dcn32_subvp_drr_admissable(struct dc *dc, struct dc_state *context)for (i =0 ; i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; -if (!pipe->stream) -continue ; - -if (pipe->plane_state && !pipe->top_pipe) { +if (resource_is_pipe_type (pipe,OPP_HEAD ) && +resource_is_pipe_type (pipe,DPP_PIPE )) {if (pipe->stream->mall_stream_config.type ==SUBVP_MAIN ) { subvp_count++;
@@ -706,10 +704,8 @@ bool dcn32_subvp_vblank_admissable(struct dc *dc, struct dc_state *context, intfor (i =0 ; i < dc->res_pool->pipe_count; i++) {struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; -if (!pipe->stream) -continue ; - -if (pipe->plane_state && !pipe->top_pipe) { +if (resource_is_pipe_type (pipe,OPP_HEAD ) && +resource_is_pipe_type (pipe,DPP_PIPE )) {if (pipe->stream->mall_stream_config.type ==SUBVP_MAIN ) { subvp_count++;
drivers/gpu/drm/amd/display/dc/dml/calcs/dce_calcs.c +1 -1
@@ -3015,7 +3015,7 @@ static bool all_displays_in_sync(const struct pipe_ctx pipe[],int i, num_active_pipes =0 ;for (i =0 ; i < pipe_count; i++) { -if (!pipe[i].stream || pipe[i].top_pipe) +if (!resource_is_pipe_type (&pipe[i],OPP_HEAD ))continue ; active_pipes[num_active_pipes++] = &pipe[i];
drivers/gpu/drm/amd/display/dc/dml/calcs/dcn_calcs.c +1 -1
@@ -1258,7 +1258,7 @@ bool dcn_validate_bandwidth( hsplit_pipe->pipe_dlg_param.vblank_end = pipe->pipe_dlg_param.vblank_end; }else {/* pipe not split previously needs split */ - hsplit_pipe =find_free_secondary_pipe_legacy (&context->res_ctx, pool, pipe); + hsplit_pipe =resource_find_free_secondary_pipe_legacy (&context->res_ctx, pool, pipe);ASSERT (hsplit_pipe);split_stream_across_pipes (&context->res_ctx, pool, pipe, hsplit_pipe); }
drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c +1 -1
@@ -1305,7 +1305,7 @@ int dcn20_populate_dml_pipes_from_context(struct dc *dc, pipes[pipe_cnt].dout.is_virtual =0 ; pipes[pipe_cnt].pipe.dest.vtotal_min = res_ctx->pipe_ctx[i].stream->adjust.v_total_min; pipes[pipe_cnt].pipe.dest.vtotal_max = res_ctx->pipe_ctx[i].stream->adjust.v_total_max; -switch (get_num_odm_splits (&res_ctx->pipe_ctx[i])) { +switch (resource_get_num_odm_splits (&res_ctx->pipe_ctx[i])) {case 1 : pipes[pipe_cnt].pipe.dest.odm_combine = dm_odm_combine_mode_2to1;break ;
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +7 -4
@@ -756,7 +756,7 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *contextstruct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];// Find the minimum pipe split count for non SubVP pipes -if (pipe->stream && !pipe->top_pipe && +if (resource_is_pipe_type (pipe,OPP_HEAD ) && pipe->stream->mall_stream_config.type ==SUBVP_NONE ) { split_cnt =0 ;while (pipe) {
@@ -886,7 +886,8 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context)// We check for master pipe, but it shouldn't matter since we only need // the pipe for timing info (stream should be same for any pipe splits) -if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe) +if (!resource_is_pipe_type (pipe,OTG_MASTER ) || + !resource_is_pipe_type (pipe,DPP_PIPE ))continue ;// Find the SubVP pipe
@@ -899,7 +900,8 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context) drr_pipe = &context->res_ctx.pipe_ctx[i];// We check for master pipe only -if (!drr_pipe->stream || !drr_pipe->plane_state || drr_pipe->top_pipe || drr_pipe->prev_odm_pipe) +if (!resource_is_pipe_type (pipe,OTG_MASTER ) || + !resource_is_pipe_type (pipe,DPP_PIPE ))continue ; if (drr_pipe->stream->mall_stream_config.type == SUBVP_NONE && drr_pipe->stream->ignore_msa_timing_param &&
@@ -980,7 +982,8 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)// We check for master pipe, but it shouldn't matter since we only need // the pipe for timing info (stream should be same for any pipe splits) -if (!pipe->stream || !pipe->plane_state || pipe->top_pipe || pipe->prev_odm_pipe) +if (!resource_is_pipe_type (pipe,OTG_MASTER ) || + !resource_is_pipe_type (pipe,DPP_PIPE ))continue ;if (!found && pipe->stream->mall_stream_config.type ==SUBVP_NONE ) {
drivers/gpu/drm/amd/display/dc/inc/resource.h +207 -13
263 lines not on this page · raw message
drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c +2 -1
@@ -675,7 +675,8 @@ bool dp_set_test_pattern(if (pipes[i].stream ==NULL )continue ; -if (pipes[i].stream->link == link && !pipes[i].top_pipe && !pipes[i].prev_odm_pipe) { +if (resource_is_pipe_type (&pipes[i],OTG_MASTER ) && + pipes[i].stream->link == link) { pipe_ctx = &pipes[i];break ; }
drivers/gpu/drm/amd/display/dc/link/link_dpms.c +2 -5
@@ -182,11 +182,8 @@ void link_resume(struct dc_link *link)static bool is_master_pipe_for_link (const struct dc_link *link,const struct pipe_ctx *pipe) { -return (pipe->stream && - pipe->stream->link && - pipe->stream->link == link && - pipe->top_pipe ==NULL && - pipe->prev_odm_pipe ==NULL ); +return resource_is_pipe_type (pipe,OTG_MASTER ) && + pipe->stream->link == link; }/*
Signature · 1 line
2.41.0
PATCH 11/15 drm/amd/display: Add some missing register definitions
In reply to Stylon WangFrom: Aurabindo Pillai <[email protected]>
[Why&How]
Add some missing register definitions and rearrange some others to maintain consistency with related definitions.
--- .../gpu/drm/amd/display/dc/dce/dce_hwseq.h | 69 +++++++++++-------- .../include/asic_reg/dcn/dcn_3_0_0_offset.h | 5 ++ .../include/asic_reg/dcn/dcn_3_0_0_sh_mask.h | 5 ++ .../include/asic_reg/dcn/dcn_3_0_2_offset.h | 4 ++ .../include/asic_reg/dcn/dcn_3_0_2_sh_mask.h | 5 +- 5 files changed, 58 insertions(+), 30 deletions(-)
drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h +40 -29
@@ -98,6 +98,29 @@SRII (PHYPLL_PIXEL_RATE_CNTL , blk,4 ), \ SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 5) +#define HWSEQ_PIXEL_RATE_REG_LIST_302 (blk) \ + SRII(PIXEL_RATE_CNTL, blk, 0), \ + SRII(PIXEL_RATE_CNTL, blk, 1),\ + SRII(PIXEL_RATE_CNTL, blk, 2),\ + SRII(PIXEL_RATE_CNTL, blk, 3), \ + SRII(PIXEL_RATE_CNTL, blk, 4) + +#define HWSEQ_PHYPLL_REG_LIST_302 (blk) \ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 0), \ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 1),\ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 2),\ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 3), \ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 4) + +#define HWSEQ_PIXEL_RATE_REG_LIST_303 (blk) \ + SRII(PIXEL_RATE_CNTL, blk, 0), \ + SRII(PIXEL_RATE_CNTL, blk, 1) + +#define HWSEQ_PHYPLL_REG_LIST_303 (blk) \ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 0), \ + SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 1) + +#define HWSEQ_PHYPLL_REG_LIST_201 (blk) \ SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 0), \ SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 1)
@@ -387,7 +410,11 @@SR (MPC_CRC_RESULT_C ), \SR (MPC_CRC_RESULT_AR ), \SR (AZALIA_AUDIO_DTO ), \ - SR(AZALIA_CONTROLLER_CLOCK_GATING) +SR (AZALIA_CONTROLLER_CLOCK_GATING ), \ +SR (HPO_TOP_CLOCK_CONTROL ), \ +SR (ODM_MEM_PWR_CTRL3 ), \ +SR (DMU_MEM_PWR_CNTL ), \ + SR(MMHUBBUB_MEM_PWR_CNTL)#define HWSEQ_DCN301_REG_LIST ()\ SR(REFCLK_CNTL), \
@@ -508,8 +535,11 @@SR (D5VGA_CONTROL ), \SR (D6VGA_CONTROL ), \SR (DC_IP_REQUEST_CNTL ), \ +HWSEQ_PIXEL_RATE_REG_LIST_302 (OTG ), \ +HWSEQ_PHYPLL_REG_LIST_302 (OTG ), \SR (AZALIA_AUDIO_DTO ), \ - SR(AZALIA_CONTROLLER_CLOCK_GATING) +SR (AZALIA_CONTROLLER_CLOCK_GATING ), \ + SR(HPO_TOP_CLOCK_CONTROL)#define HWSEQ_DCN303_REG_LIST () \ HWSEQ_DCN_REG_LIST(), \
@@ -540,28 +570,6 @@SR (AZALIA_CONTROLLER_CLOCK_GATING ), \SR (HPO_TOP_CLOCK_CONTROL ) -#define HWSEQ_PIXEL_RATE_REG_LIST_302 (blk) \ - SRII(PIXEL_RATE_CNTL, blk, 0), \ - SRII(PIXEL_RATE_CNTL, blk, 1),\ - SRII(PIXEL_RATE_CNTL, blk, 2),\ - SRII(PIXEL_RATE_CNTL, blk, 3), \ - SRII(PIXEL_RATE_CNTL, blk, 4) - -#define HWSEQ_PHYPLL_REG_LIST_302 (blk) \ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 0), \ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 1),\ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 2),\ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 3), \ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 4) - -#define HWSEQ_PIXEL_RATE_REG_LIST_303 (blk) \ - SRII(PIXEL_RATE_CNTL, blk, 0), \ - SRII(PIXEL_RATE_CNTL, blk, 1) - -#define HWSEQ_PHYPLL_REG_LIST_303 (blk) \ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 0), \ - SRII(PHYPLL_PIXEL_RATE_CNTL, blk, 1) - struct dce_hwseq_registers { uint32_t DCFE_CLOCK_CONTROL[6];uint32_t DCFEV_CLOCK_CONTROL ;
@@ -663,14 +671,15 @@ struct dce_hwseq_registers {uint32_t MC_VM_XGMI_LFB_CNTL ;uint32_t AZALIA_AUDIO_DTO ;uint32_t AZALIA_CONTROLLER_CLOCK_GATING ; +/* MMHUB VM */ +uint32_t MC_VM_FB_LOCATION_BASE ; +uint32_t MC_VM_FB_LOCATION_TOP ; +uint32_t MC_VM_FB_OFFSET ; +uint32_t MMHUBBUB_MEM_PWR_CNTL ;uint32_t HPO_TOP_CLOCK_CONTROL ;uint32_t ODM_MEM_PWR_CTRL3 ;uint32_t DMU_MEM_PWR_CNTL ; -uint32_t MMHUBBUB_MEM_PWR_CNTL ;uint32_t DCHUBBUB_ARB_HOSTVM_CNTL ; -uint32_t MC_VM_FB_LOCATION_BASE ; -uint32_t MC_VM_FB_LOCATION_TOP ; -uint32_t MC_VM_FB_OFFSET ;uint32_t HPO_TOP_HW_CONTROL ; };/* set field name */
@@ -915,6 +924,7 @@ struct dce_hwseq_registers {#define HWSEQ_DCN30_MASK_SH_LIST (mask_sh)\ HWSEQ_DCN2_MASK_SH_LIST(mask_sh), \ HWS_SF(, AZALIA_AUDIO_DTO, AZALIA_AUDIO_DTO_MODULE, mask_sh), \ + HWS_SF(, HPO_TOP_CLOCK_CONTROL, HPO_HDMISTREAMCLK_GATE_DIS, mask_sh), \ HWS_SF(, ODM_MEM_PWR_CTRL3, ODM_MEM_UNASSIGNED_PWR_MODE, mask_sh), \ HWS_SF(, ODM_MEM_PWR_CTRL3, ODM_MEM_VBLANK_PWR_MODE, mask_sh), \ HWS_SF(, DMU_MEM_PWR_CNTL, DMCU_ERAM_MEM_PWR_FORCE, mask_sh), \
@@ -1012,7 +1022,8 @@ struct dce_hwseq_registers { HWS_SF(, DOMAIN19_PG_STATUS, DOMAIN19_PGFSM_PWR_STATUS, mask_sh), \ HWS_SF(, DOMAIN20_PG_STATUS, DOMAIN20_PGFSM_PWR_STATUS, mask_sh), \ HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \ - HWS_SF(, AZALIA_AUDIO_DTO, AZALIA_AUDIO_DTO_MODULE, mask_sh) + HWS_SF(, AZALIA_AUDIO_DTO, AZALIA_AUDIO_DTO_MODULE, mask_sh), \ + HWS_SF(, HPO_TOP_CLOCK_CONTROL, HPO_HDMISTREAMCLK_GATE_DIS, mask_sh)#define HWSEQ_DCN303_MASK_SH_LIST (mask_sh) \ HWSEQ_DCN_MASK_SH_LIST(mask_sh), \
drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_3_0_0_offset.h +5 -0
@@ -15805,6 +15805,11 @@#define mmDME6_DME_MEMORY_CONTROL 0x093d#define mmDME6_DME_MEMORY_CONTROL_BASE_IDX 3 +// addressBlock: dce_dc_hpo_hpo_top_dispdec +// base address: 0x0 +#define mmHPO_TOP_CLOCK_CONTROL 0x0e43 +#define mmHPO_TOP_CLOCK_CONTROL_BASE_IDX 3 +// base address: 0x1a698 #define mmDC_PERFMON29_PERFCOUNTER_CNTL 0x0e66#define mmDC_PERFMON29_PERFCOUNTER_CNTL_BASE_IDX 3
drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_3_0_0_sh_mask.h +5 -0
@@ -60666,7 +60666,12 @@#define DME6_DME_MEMORY_CONTROL__DME_MEM_PWR_STATE_MASK 0x00000300L#define DME6_DME_MEMORY_CONTROL__DME_MEM_DEFAULT_MEM_LOW_POWER_STATE_MASK 0x00003000L +// addressBlock: dce_dc_hpo_hpo_top_dispdec +//HPO_TOP_CLOCK_CONTROL +#define HPO_TOP_CLOCK_CONTROL__HPO_HDMISTREAMCLK_GATE_DIS__SHIFT 0x9 +#define HPO_TOP_CLOCK_CONTROL__HPO_HDMISTREAMCLK_GATE_DIS_MASK 0x00000200L +// addressBlock: dce_dc_hpo_hpo_dcperfmon_dc_perfmon_dispdec //DC_PERFMON29_PERFCOUNTER_CNTL #define DC_PERFMON29_PERFCOUNTER_CNTL__PERFCOUNTER_EVENT_SEL__SHIFT 0x0#define DC_PERFMON29_PERFCOUNTER_CNTL__PERFCOUNTER_CVALUE_SEL__SHIFT 0x9
drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_3_0_2_offset.h +4 -0
@@ -14205,6 +14205,10 @@ +// addressBlock: dce_dc_hpo_hpo_top_dispdec +// base address: 0x0 +#define mmHPO_TOP_CLOCK_CONTROL 0x0e43 +#define mmHPO_TOP_CLOCK_CONTROL_BASE_IDX 3// base address: 0x1a698 #define mmDC_PERFMON26_PERFCOUNTER_CNTL 0x0e66
drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_3_0_2_sh_mask.h +4 -1
@@ -52401,7 +52401,10 @@#define DC_PERFMON25_PERFMON_LOW__PERFMON_LOW__SHIFT 0x0#define DC_PERFMON25_PERFMON_LOW__PERFMON_LOW_MASK 0xFFFFFFFFL - +// addressBlock: dce_dc_hpo_hpo_top_dispdec +//HPO_TOP_CLOCK_CONTROL +#define HPO_TOP_CLOCK_CONTROL__HPO_HDMISTREAMCLK_GATE_DIS__SHIFT 0x9 +#define HPO_TOP_CLOCK_CONTROL__HPO_HDMISTREAMCLK_GATE_DIS_MASK 0x00000200L// addressBlock: dce_dc_hpo_hpo_dcperfmon_dc_perfmon_dispdec //DC_PERFMON26_PERFCOUNTER_CNTL
Signature · 1 line
2.41.0
PATCH 12/15 drm/amd/display: enable low power mode for VGA memory
In reply to Stylon WangFrom: Aurabindo Pillai <[email protected]>
[Why]
When unused, all memory blocks should be put in a low power state
[How]
Check the value of enable_mem_low_power.bits.vga and set corresponding bit in the hardware register
--- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +5 -0
@@ -461,6 +461,11 @@ void dcn30_init_hw(struct dc *dc)REG_SET_2 (ODM_MEM_PWR_CTRL3 ,0 ,ODM_MEM_UNASSIGNED_PWR_MODE ,3 ,ODM_MEM_VBLANK_PWR_MODE ,1 ); } +if (dc->debug.enable_mem_low_power.bits.vga) { +// Power down VGA memory +REG_UPDATE (MMHUBBUB_MEM_PWR_CNTL ,VGA_MEM_PWR_FORCE ,1 ); + } +if (dc->ctx->dc_bios->fw_info_valid) { res_pool->ref_clocks.xtalin_clock_inKhz = dc->ctx->dc_bios->fw_info.pll_info.crystal_frequency;
Signature · 1 line
2.41.0
PATCH 13/15 drm/amd/display: Remove freesync video mode amdgpu parameter
In reply to Stylon WangFrom: Aurabindo Pillai <[email protected]>
[Why&How]
Freesync Video mode was enabled by default. Hence no need for the module parameter, so remove it completely
--- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 - drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 27 ------------------------- 2 files changed, 28 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu.h +0 -1
@@ -193,7 +193,6 @@ extern int amdgpu_emu_mode;extern uint amdgpu_smu_memory_pool_size;extern int amdgpu_smu_pptable_id;extern uint amdgpu_dc_feature_mask; -extern uint amdgpu_freesync_vid_mode;extern uint amdgpu_dc_debug_mask;extern uint amdgpu_dc_visual_confirm;extern uint amdgpu_dm_abm_level;
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +0 -27
@@ -187,7 +187,6 @@ int amdgpu_mes_kiq;int amdgpu_noretry =-1 ;int amdgpu_force_asic_type =-1 ;int amdgpu_tmz =-1 ;/* auto */ -uint amdgpu_freesync_vid_mode;int amdgpu_reset_method =-1 ;/* auto */ int amdgpu_num_kcq =-1 ;int amdgpu_smartshift_bias;
@@ -885,32 +884,6 @@ module_param_named(backlight, amdgpu_backlight, bint, 0444);MODULE_PARM_DESC (tmz,"Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)" );module_param_named (tmz, amdgpu_tmz, int,0444 ); -/** -* DOC: freesync_video (uint) -* Enable the optimization to adjust front porch timing to achieve seamless -* mode change experience when setting a freesync supported mode for which full -* modeset is not needed. -* -* The Display Core will add a set of modes derived from the base FreeSync -* video mode into the corresponding connector's mode list based on commonly -* used refresh rates and VRR range of the connected display, when users enable -* this feature. From the userspace perspective, they can see a seamless mode -* change experience when the change between different refresh rates under the -* same resolution. Additionally, userspace applications such as Video playback -* can read this modeset list and change the refresh rate based on the video -* frame rate. Finally, the userspace can also derive an appropriate mode for a -* particular refresh rate based on the FreeSync Mode and add it to the -* connector's mode list. -* -* Note: This is an experimental feature. -* -* The default value: 0 (off). -*/ -MODULE_PARM_DESC ( - freesync_video, -"Enable freesync modesetting optimization feature (0 = off (default), 1 = on)" ); -module_param_named (freesync_video, amdgpu_freesync_vid_mode, uint,0444 ); -/** * DOC: reset_method (int) * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
Signature · 1 line
2.41.0
Re: [PATCH 13/15] drm/amd/display: Remove freesync video mode amdgpu parameter
[AMD Official Use Only - General]
Hi Stylon,
Sorry, the title is misleading. This doesn't touch display. Could you please remove display from the title and make it drm/amd:
--
Regards,
Jay
________________________________
From: Wang, Chao-kai (Stylon) <[email protected]>
Sent: Wednesday, August 9, 2023 11:05 AM
To: [email protected] <[email protected]>
Cc: Wentland, Harry <[email protected]>; Li, Sun peng (Leo) <[email protected]>; Lakha, Bhawanpreet <[email protected]>; Siqueira, Rodrigo <[email protected]>; Pillai, Aurabindo <[email protected]>; Zhuo, Qingqing (Lillian) <[email protected]>; Li, Roman <[email protected]>; Lin, Wayne <[email protected]>; Wang, Chao-kai (Stylon) <[email protected]>; Chiu, Solomon <[email protected]>; Kotarac, Pavle <[email protected]>; Gutierrez, Agustin <[email protected]>; Pillai, Aurabindo <[email protected]>
Subject: [PATCH 13/15] drm/amd/display: Remove freesync video mode amdgpu parameter
From: Aurabindo Pillai <[email protected]>
[Why&How]
Freesync Video mode was enabled by default. Hence no need for the module parameter, so remove it completely
--- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 - drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 27 ------------------------- 2 files changed, 28 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu.h +0 -1
@@ -193,7 +193,6 @@ extern int amdgpu_emu_mode;extern uint amdgpu_smu_memory_pool_size;extern int amdgpu_smu_pptable_id;extern uint amdgpu_dc_feature_mask; -extern uint amdgpu_freesync_vid_mode;extern uint amdgpu_dc_debug_mask;extern uint amdgpu_dc_visual_confirm;extern uint amdgpu_dm_abm_level;
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +0 -27
@@ -187,7 +187,6 @@ int amdgpu_mes_kiq;int amdgpu_noretry =-1 ;int amdgpu_force_asic_type =-1 ;int amdgpu_tmz =-1 ;/* auto */ -uint amdgpu_freesync_vid_mode;int amdgpu_reset_method =-1 ;/* auto */ int amdgpu_num_kcq =-1 ;int amdgpu_smartshift_bias;
@@ -885,32 +884,6 @@ module_param_named(backlight, amdgpu_backlight, bint, 0444);MODULE_PARM_DESC (tmz,"Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)" );module_param_named (tmz, amdgpu_tmz, int,0444 ); -/** -* DOC: freesync_video (uint) -* Enable the optimization to adjust front porch timing to achieve seamless -* mode change experience when setting a freesync supported mode for which full -* modeset is not needed. -* -* The Display Core will add a set of modes derived from the base FreeSync -* video mode into the corresponding connector's mode list based on commonly -* used refresh rates and VRR range of the connected display, when users enable -* this feature. From the userspace perspective, they can see a seamless mode -* change experience when the change between different refresh rates under the -* same resolution. Additionally, userspace applications such as Video playback -* can read this modeset list and change the refresh rate based on the video -* frame rate. Finally, the userspace can also derive an appropriate mode for a -* particular refresh rate based on the FreeSync Mode and add it to the -* connector's mode list. -* -* Note: This is an experimental feature. -* -* The default value: 0 (off). -*/ -MODULE_PARM_DESC ( - freesync_video, -"Enable freesync modesetting optimization feature (0 = off (default), 1 = on)" ); -module_param_named (freesync_video, amdgpu_freesync_vid_mode, uint,0444 ); -/** * DOC: reset_method (int) * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
--
2.41.0
PATCH 14/15 drm/amd/display: [FW Promotion] Release 0.0.179.0
In reply to Stylon WangFrom: Anthony Koo <[email protected]>
- Add defines to specify new PHY power states
--- drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +4 -0
@@ -2144,6 +2144,10 @@ enum dmub_phy_fsm_state {DMUB_PHY_FSM_PLL_EN ,DMUB_PHY_FSM_TX_EN ,DMUB_PHY_FSM_FAST_LP , +DMUB_PHY_FSM_P2_PLL_OFF_CPM , +DMUB_PHY_FSM_P2_PLL_OFF_PG , +DMUB_PHY_FSM_P2_PLL_OFF , + DMUB_PHY_FSM_P2_PLL_ON, };/**
Signature · 1 line
2.41.0
PATCH 15/15 drm/amd/display: Promote DAL to 3.2.247
In reply to Stylon WangFrom: Aric Cyr <[email protected]>
This version brings along following fixes:
- Improve power saving feature
- Clean up for code clarity
- Fix MST issues in system resume
- Fix crashing bug
- Fix pipe allocation for older ASIC
- Fix for gamut remap
- Fix 8K 60Hz display in test cases
- Fix bug in clock gating
- Improve DP2 compliance
--- drivers/gpu/drm/amd/display/dc/dc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dc.h +1 -1
@@ -47,7 +47,7 @@ struct aux_payload;struct set_config_cmd_payload ;struct dmub_notification ; -#define DC_VER "3.2.246" +#define DC_VER "3.2.247"#define MAX_SURFACES 3#define MAX_PLANES 6
Signature · 1 line
2.41.0