arm64: dts: qcom: sa8540p-ride: enable rtc
PATCH v3 1/1 arm64: dts: qcom: sa8540p-ride: enable rtc
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in:
https://lore.kernel.org/all/[email protected]/
Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations:
commit e67b45582c5e ("arm64: dts: qcom: sc8280xp-crd: enable rtc")On SA8540P-ride, the register bank SDAM6 of the first PMIC is not writable. Following recommendations provided during the review, use SDAM2 from the second PMIC at offset 0xa0 instead.
---
Changes in v3:
* Reserve rtc-offset@a0 in pmm8540c_sdam_2 instead of rtc-offset@ac in pmm8540a_sdam_7.
* v2: https://lore.kernel.org/linux-arm-msm/[email protected]/
Changes in v2:
* Default pmm8540a_sdam_7 status to "disabled" in sa8540p-pmics.dtsi.
* v1: https://lore.kernel.org/linux-arm-msm/[email protected]/
arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi | 11 ++++++++++- arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 15 +++++++++++++++ 2 files changed, 25 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi +10 -1
@@ -14,7 +14,7 @@ pmm8540a: pmic@0 { #address-cells = <1>; #size-cells = <0>; - rtc@6000 { + pmm8540a_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm";
@@ -39,6 +39,15 @@ pmm8540c: pmic@4 { #address-cells = <1>; #size-cells = <0>; + pmm8540c_sdam_2: nvram@b110 { + compatible = "qcom,spmi-sdam"; + reg = <0xb110>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xb110 0xb0>; + status = "disabled"; + }; + pmm8540c_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>;
arch/arm64/boot/dts/qcom/sa8540p-ride.dts +15 -0
@@ -407,6 +407,21 @@ &pcie3a_phy { status = "okay"; }; +&pmm8540a_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmm8540c_sdam_2 { + status = "okay"; + + rtc_offset: rtc-offset@a0 { + reg = <0xa0 0x4>; + }; +}; + &qup0 { status = "okay"; };
Signature · 1 line
2.41.0
Quoted 11 lines · Eric Chanudet
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in:
https://lore.kernel.org/all/[email protected]/Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations:
commit e67b45582c5e ("arm64: dts: qcom: sc8280xp-crd: enable rtc")[...]
Applied, thanks!
[1/1] arm64: dts: qcom: sa8540p-ride: enable rtc
commit: e85cbb34f3eabc27d6e77cfde6c9afbab3d70b4b
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>