Fix StarFive JH7110 gmac TCP RX speed issue
Subsystems (3)
cover Fix StarFive JH7110 gmac TCP RX speed issue
This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been tested on VisionFive 2.
Here is the result of the test (iperf3):
Before:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47604
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
[ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
[ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
[ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
[ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
[ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
[ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
[ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverAfter:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47710
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec
[ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec
[ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
[ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec
[ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec
[ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec
[ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
[ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiverFor more information and support, you can visit RVspace wiki[1].
[1]: https://wiki.rvspace.org/
Samin Guo (1):
riscv: starfive: jh7110: Fix GMAC configuration
arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
--
2.17.1
PATCH 1/1 riscv: dts: starfive: jh7110: Fix GMAC configuration
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
After:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
--- arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/riscv/boot/dts/starfive/jh7110.dtsi +4 -4
@@ -318,8 +318,8 @@ stmmac_axi_setup: stmmac-axi-config { snps,lpi_en; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <4>; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; snps,blen = <256 128 64 32 0 0 0>; };
@@ -839,7 +839,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode;
@@ -870,7 +870,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode;
--
2.17.1
Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
Quoted 47 lines · Samin Guo
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverAfter:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
Quoted 2 lines
Reviewed-by Hal Feng <[email protected]>Signed-off-by Samin Guo <[email protected]>
This is
right?
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
Quoted 48 lines · Conor Dooley
Quoted 47 lines · Samin Guo
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverAfter:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
Quoted 6 lines
Quoted 2 lines
Reviewed-by Hal Feng <[email protected]>Signed-off-by Samin Guo <[email protected]>This is
Fixes 1ff166c97972 ("riscv: dts: starfive: jh7110: Add ethernet device nodes")right?
Hi Conor,
Yes. There is an issue with the configuration of the 1ff166c97972 that affects the speed of the GMAC TCP RX.
Best regards,
Samin
Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
In reply to Samin GuoQuoted 59 lines · Samin Guo
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverAfter:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiverReviewed-by Hal Feng <[email protected]>Signed-off-by Samin Guo <[email protected]>--- arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/riscv/boot/dts/starfive/jh7110.dtsi +0
-0
arch/riscv/boot/dts/starfive/jh7110.dtsi line 322
Quoted 7 lines
arch/riscv/boot/dts/starfive/jh7110.dtsi +2
-2@@ -318,8 +318,8 @@ stmmac_axi_setup: stmmac-axi-config { snps,lpi_en; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <4>; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>;
nit: this is a limit, so presumably counting things and not an address or bitmask, so I'd prefer decimal numbers here, eg <15>.
It works fine either way, so
Quoted 24 lines
arch/riscv/boot/dts/starfive/jh7110.dtsi +2
-3snps,blen = <256 128 64 32 0 0 0>; };@@ -839,7 +839,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode;@@ -870,7 +870,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode; --2.17.1
Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
Quoted 71 lines · Emil Renner Berthing
Quoted 59 lines · Samin Guo
Fixed configuration to improve the speed of TCP RX.
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverAfter:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiverReviewed-by Hal Feng <[email protected]>Signed-off-by Samin Guo <[email protected]>--- arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)arch/riscv/boot/dts/starfive/jh7110.dtsi +0
-0arch/riscv/boot/dts/starfive/jh7110.dtsi line 322
Quoted 7 lines
arch/riscv/boot/dts/starfive/jh7110.dtsi +2
-2@@ -318,8 +318,8 @@ stmmac_axi_setup: stmmac-axi-config { snps,lpi_en; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <4>; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>;nit: this is a limit, so presumably counting things and not an address or bitmask, so I'd prefer decimal numbers here, eg <15>.
Quoted 2 lines
It works fine either way, so
Reviewed-by Emil Renner Berthing <[email protected]>
Thanks Esmil, that's right.
I refer to examples of snps,dwmac.yaml, so I use 0xf...
Best regards,
Samin
Quoted 25 lines
Quoted 25 lines
arch/riscv/boot/dts/starfive/jh7110.dtsi +2
-3snps,blen = <256 128 64 32 0 0 0>; };@@ -839,7 +839,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode;@@ -870,7 +870,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode; --2.17.1
From: Conor Dooley <[email protected]>
Quoted 27 lines · Samin Guo
This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been tested on VisionFive 2.
Here is the result of the test (iperf3):
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
Quoted 1 line
[...]
Applied to riscv-dt-for-next with the conversion to decimal, thanks!
[1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
https://git.kernel.org/conor/c/1273f7e96a70
Thanks,
Conor.
Quoted 32 lines · Conor Dooley
From: Conor Dooley <[email protected]>
Quoted 27 lines · Samin Guo
This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been tested on VisionFive 2.
Here is the result of the test (iperf3):
Before:
# iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiverQuoted 1 line
[...]
Quoted 7 lines
Applied to riscv-dt-for-next with the conversion to decimal, thanks!
[1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration
https://git.kernel.org/conor/c/1273f7e96a70Thanks,
Conor.
Hi Conor,
Thank a lot for for merging into the next branch so promptly!
Best regards,
Samin