Skip to contentSkip to conversation

mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I

PATCH In review Chevron Li 2 participants 4 messages Aug 11, 2023

Subsystems (2)
lore
Share & tools
lore

Chevron Li

author
#0 lore raw

PATCH v3 1/2 mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I

From: Chevron Li <[email protected]>

Add Bayhub new chip GG8 support for UHS-I function

---
Change in V1:
1.Add GG8 chip IDs in sdhci-pci-core.c and sdhci-pci.h 2.Add GG8 chip initialization flow at sdhci-pci-o2micro.c

Change in V2:
1.updated typo description for the patch title. 2.updated patch format according to reviewer's comments.

Change in V3:
Updated patch format according to reviewer's comments.

---
 drivers/mmc/host/sdhci-pci-core.c    |   4 +
 drivers/mmc/host/sdhci-pci-o2micro.c | 148 ++++++++++++++++++++-------
 drivers/mmc/host/sdhci-pci.h         |   4 +
 3 files changed, 120 insertions(+), 36 deletions(-)
drivers/mmc/host/sdhci-pci-core.c +4 -0
index 1c2572c0f012..7c14feb5db77 100644
@@ -1898,6 +1898,10 @@ static const struct pci_device_id pci_ids[] = {
 	SDHCI_PCI_DEVICE(O2, SDS1,     o2),
 	SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
 	SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
+	SDHCI_PCI_DEVICE(O2, GG8_9860, o2),
+	SDHCI_PCI_DEVICE(O2, GG8_9861, o2),
+	SDHCI_PCI_DEVICE(O2, GG8_9862, o2),
+	SDHCI_PCI_DEVICE(O2, GG8_9863, o2),
 	SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
 	SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
 	SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
drivers/mmc/host/sdhci-pci-o2micro.c +112 -36

222 lines not on this page · raw message

drivers/mmc/host/sdhci-pci.h +4 -0
index 9c8863956381..153704f812ed 100644
@@ -11,6 +11,10 @@
 #define PCI_DEVICE_ID_O2_FUJIN2		0x8520
 #define PCI_DEVICE_ID_O2_SEABIRD0	0x8620
 #define PCI_DEVICE_ID_O2_SEABIRD1	0x8621
+#define PCI_DEVICE_ID_O2_GG8_9860	0x9860
+#define PCI_DEVICE_ID_O2_GG8_9861	0x9861
+#define PCI_DEVICE_ID_O2_GG8_9862	0x9862
+#define PCI_DEVICE_ID_O2_GG8_9863	0x9863
 
 #define PCI_DEVICE_ID_INTEL_PCH_SDIO0	0x8809
 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1	0x880a

base-commit: 25aa0bebba72b318e71fe205bfd1236550cc9534

Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v3 2/2 mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for express card

From: Chevron Li <[email protected]>

Add Bayhub new chip GG8 support for SD express card. This patch depends on patch 1/2.

---
Change in V1:
1.Implement the SD express card callback routine. 2.Add SD express card support for Bayhub GG8 chip.

Change in V2:
1.updated some typo in patch and modified title.
2.updated patch format according to reviewer's comments. 3.updated the logical to try UHSI when express card initializatio failed.

Change in V3:
Fix the redefine issue.

---
 drivers/mmc/host/sdhci-pci-o2micro.c | 65 +++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-o2micro.c +64 -1
index ae2707fbd119..7bfee28116af 100644
@@ -21,6 +21,7 @@
  * O2Micro device registers
  */
 
+#define O2_SD_PCIE_SWITCH	0x54
 #define O2_SD_MISC_REG5		0x64
 #define O2_SD_LD0_CTRL		0x68
 #define O2_SD_DEV_CTRL		0x88
@@ -631,6 +632,67 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_o2_enable_clk(host, clk);
 }
 
+static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct sdhci_pci_chip *chip = slot->chip;
+	u8 scratch8;
+	u16 scratch16;
+	int ret;
+
+	/* Disable clock */
+	sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
+
+	/* Set VDD2 voltage*/
+	scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
+	scratch8 &= 0x0F;
+	if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V &&
+	    host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) {
+		scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120;
+	} else {
+		scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180;
+	}
+
+	sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
+
+	/* UnLock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
+	scratch8 &= 0x7f;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
+
+	/* Wait for express card clkreqn assert */
+	ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)),
+				1, 30000, false, host, O2_SD_EXP_INT_REG);
+
+	if (!ret) {
+		/* Switch to PCIe mode */
+		scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH);
+		scratch16 |= BIT(8);
+		sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH);
+	} else {
+		/* Power off VDD2 voltage*/
+		scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
+		scratch8 &= 0x0F;
+		sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
+
+		/* Keep mode as UHSI */
+		pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
+		scratch16 &= ~BIT(11);
+		pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
+
+		host->mmc->ios.timing = MMC_TIMING_LEGACY;
+		pr_info("%s: Express card initialization failed, falling back to Legacy\n",
+			mmc_hostname(host->mmc));
+	}
+	/* Lock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
+	scratch8 |= 0x80;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
+
+	return 0;
+}
+
 static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_pci_chip *chip;
@@ -703,10 +765,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 	case PCI_DEVICE_ID_O2_GG8_9861:
 	case PCI_DEVICE_ID_O2_GG8_9862:
 	case PCI_DEVICE_ID_O2_GG8_9863:
-		host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+		host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
 		host->mmc->caps |= MMC_CAP_HW_RESET;
 		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
 		slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
+		host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express;
 		break;
 	default:
 		break;
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH V3 2/2] mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for express card

Quoted 8 lines · Chevron Li

From: Chevron Li <[email protected]>

Add Bayhub new chip GG8 support for SD express card. This patch depends on patch 1/2.

Applied for next, thanks!

Kind regards
Uffe

Quoted 112 lines

---
Change in V1:
1.Implement the SD express card callback routine. 2.Add SD express card support for Bayhub GG8 chip.

Change in V2:
1.updated some typo in patch and modified title.
2.updated patch format according to reviewer's comments. 3.updated the logical to try UHSI when express card initializatio failed.

Change in V3:
Fix the redefine issue.

---
 drivers/mmc/host/sdhci-pci-o2micro.c | 65 +++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-o2micro.c +64 -2
index ae2707fbd119..7bfee28116af 100644
@@ -21,6 +21,7 @@
  * O2Micro device registers
  */
 
+#define O2_SD_PCIE_SWITCH      0x54
 #define O2_SD_MISC_REG5                0x64
 #define O2_SD_LD0_CTRL         0x68
 #define O2_SD_DEV_CTRL         0x88
@@ -631,6 +632,67 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
        sdhci_o2_enable_clk(host, clk);
 }
 
+static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+       struct sdhci_host *host = mmc_priv(mmc);
+       struct sdhci_pci_slot *slot = sdhci_priv(host);
+       struct sdhci_pci_chip *chip = slot->chip;
+       u8 scratch8;
+       u16 scratch16;
+       int ret;
+
+       /* Disable clock */
+       sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
+
+       /* Set VDD2 voltage*/
+       scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
+       scratch8 &= 0x0F;
+       if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V &&
+           host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) {
+               scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120;
+       } else {
+               scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180;
+       }
+
+       sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
+
+       /* UnLock WP */
+       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
+       scratch8 &= 0x7f;
+       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
+
+       /* Wait for express card clkreqn assert */
+       ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)),
+                               1, 30000, false, host, O2_SD_EXP_INT_REG);
+
+       if (!ret) {
+               /* Switch to PCIe mode */
+               scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH);
+               scratch16 |= BIT(8);
+               sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH);
+       } else {
+               /* Power off VDD2 voltage*/
+               scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
+               scratch8 &= 0x0F;
+               sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
+
+               /* Keep mode as UHSI */
+               pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
+               scratch16 &= ~BIT(11);
+               pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
+
+               host->mmc->ios.timing = MMC_TIMING_LEGACY;
+               pr_info("%s: Express card initialization failed, falling back to Legacy\n",
+                       mmc_hostname(host->mmc));
+       }
+       /* Lock WP */
+       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
+       scratch8 |= 0x80;
+       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
+
+       return 0;
+}
+
 static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
        struct sdhci_pci_chip *chip;
@@ -703,10 +765,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
        case PCI_DEVICE_ID_O2_GG8_9861:
        case PCI_DEVICE_ID_O2_GG8_9862:
        case PCI_DEVICE_ID_O2_GG8_9863:
-               host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+               host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
                host->mmc->caps |= MMC_CAP_HW_RESET;
                host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
                slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
+               host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express;
                break;
        default:
                break;
--

2.25.1

#3 lore raw
In reply to Chevron Li
Quoted 7 lines · Chevron Li

From: Chevron Li <[email protected]>

Add Bayhub new chip GG8 support for UHS-I function

Applied for next, thanks!

Kind regards
Uffe

Quoted 288 lines

---
Change in V1:
1.Add GG8 chip IDs in sdhci-pci-core.c and sdhci-pci.h 2.Add GG8 chip initialization flow at sdhci-pci-o2micro.c

Change in V2:
1.updated typo description for the patch title. 2.updated patch format according to reviewer's comments.

Change in V3:
Updated patch format according to reviewer's comments.

---
 drivers/mmc/host/sdhci-pci-core.c    |   4 +
 drivers/mmc/host/sdhci-pci-o2micro.c | 148 ++++++++++++++++++++-------
 drivers/mmc/host/sdhci-pci.h         |   4 +
 3 files changed, 120 insertions(+), 36 deletions(-)
drivers/mmc/host/sdhci-pci-core.c +4 -0
index 1c2572c0f012..7c14feb5db77 100644
@@ -1898,6 +1898,10 @@ static const struct pci_device_id pci_ids[] = {
        SDHCI_PCI_DEVICE(O2, SDS1,     o2),
        SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
        SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
+       SDHCI_PCI_DEVICE(O2, GG8_9860, o2),
+       SDHCI_PCI_DEVICE(O2, GG8_9861, o2),
+       SDHCI_PCI_DEVICE(O2, GG8_9862, o2),
+       SDHCI_PCI_DEVICE(O2, GG8_9863, o2),
        SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
        SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
        SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
drivers/mmc/host/sdhci-pci-o2micro.c +112 -36
index 620f52ad9667..ae2707fbd119 100644
@@ -36,6 +36,7 @@
 #define O2_SD_INF_MOD          0xF1
 #define O2_SD_MISC_CTRL4       0xFC
 #define O2_SD_MISC_CTRL                0x1C0
+#define O2_SD_EXP_INT_REG      0x1E0
 #define O2_SD_PWR_FORCE_L0     0x0002
 #define O2_SD_TUNING_CTRL      0x300
 #define O2_SD_PLL_SETTING      0x304
@@ -49,6 +50,9 @@
 #define O2_SD_UHS2_L1_CTRL     0x35C
 #define O2_SD_FUNC_REG3                0x3E0
 #define O2_SD_FUNC_REG4                0x3E4
+#define O2_SD_PARA_SET_REG1    0x444
+#define O2_SD_VDDX_CTRL_REG    0x508
+#define O2_SD_GPIO_CTRL_REG1   0x510
 #define O2_SD_LED_ENABLE       BIT(6)
 #define O2_SD_FREG0_LEDOFF     BIT(13)
 #define O2_SD_SEL_DLL          BIT(16)
@@ -334,33 +338,45 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
        scratch |= O2_SD_PWR_FORCE_L0;
        sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
 
-       /* Stop clk */
-       reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-       reg_val &= ~SDHCI_CLOCK_CARD_EN;
-       sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
-
-       if ((host->timing == MMC_TIMING_MMC_HS200) ||
-               (host->timing == MMC_TIMING_UHS_SDR104)) {
-               /* UnLock WP */
-               pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
-               scratch_8 &= 0x7f;
-               pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
-
-               /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
-               pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
-               reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
-               reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
-               pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+       /* Update output phase */
+       switch (chip->pdev->device) {
+       case PCI_DEVICE_ID_O2_SDS0:
+       case PCI_DEVICE_ID_O2_SEABIRD0:
+       case PCI_DEVICE_ID_O2_SEABIRD1:
+       case PCI_DEVICE_ID_O2_SDS1:
+       case PCI_DEVICE_ID_O2_FUJIN2:
+               /* Stop clk */
+               reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+               reg_val &= ~SDHCI_CLOCK_CARD_EN;
+               sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
+               if (host->timing == MMC_TIMING_MMC_HS200 ||
+                   host->timing == MMC_TIMING_UHS_SDR104) {
+                       /* UnLock WP */
+                       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+                       scratch_8 &= 0x7f;
+                       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+                       /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
+                       pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
+                       reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+                       reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
+                       pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+
+                       /* Lock WP */
+                       pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+                       scratch_8 |= 0x80;
+                       pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+               }
 
-               /* Lock WP */
-               pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
-               scratch_8 |= 0x80;
-               pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+               /* Start clk */
+               reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+               reg_val |= SDHCI_CLOCK_CARD_EN;
+               sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+               break;
+       default:
+               break;
        }
-       /* Start clk */
-       reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-       reg_val |= SDHCI_CLOCK_CARD_EN;
-       sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
 
        /* wait DLL lock, timeout value 5ms */
        if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
@@ -563,6 +579,7 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
        u16 clk;
        u8 scratch;
        u32 scratch_32;
+       u32 dmdn_208m, dmdn_200m;
        struct sdhci_pci_slot *slot = sdhci_priv(host);
        struct sdhci_pci_chip *chip = slot->chip;
 
@@ -578,16 +595,27 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
        scratch &= 0x7f;
        pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
+       if (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860 ||
+           chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861 ||
+           chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862 ||
+           chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863) {
+               dmdn_208m = 0x2c500000;
+               dmdn_200m = 0x25200000;
+       } else {
+               dmdn_208m = 0x2c280000;
+               dmdn_200m = 0x25100000;
+       }
+
        if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
                pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
 
-               if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
-                       o2_pci_set_baseclk(chip, 0x2c280000);
+               if ((scratch_32 & 0xFFFF0000) != dmdn_208m)
+                       o2_pci_set_baseclk(chip, dmdn_208m);
        } else {
                pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
 
-               if ((scratch_32 & 0xFFFF0000) != 0x25100000)
-                       o2_pci_set_baseclk(chip, 0x25100000);
+               if ((scratch_32 & 0xFFFF0000) != dmdn_200m)
+                       o2_pci_set_baseclk(chip, dmdn_200m);
        }
 
        pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
@@ -624,6 +652,11 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
        if (caps & SDHCI_CAN_DO_8BIT)
                host->mmc->caps |= MMC_CAP_8_BIT_DATA;
 
+       host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
+
+       sdhci_pci_o2_enable_msi(chip, host);
+
+       host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
        switch (chip->pdev->device) {
        case PCI_DEVICE_ID_O2_SDS0:
        case PCI_DEVICE_ID_O2_SEABIRD0:
@@ -634,10 +667,6 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
                if (reg & 0x1)
                        host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
 
-               host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
-
-               sdhci_pci_o2_enable_msi(chip, host);
-
                if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
                        ret = pci_read_config_dword(chip->pdev,
                                                    O2_SD_MISC_SETTING, &reg);
@@ -663,15 +692,21 @@ static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
                        host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
                }
 
-               host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
-
                if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
                        break;
                /* set dll watch dog timer */
                reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
                reg |= (1 << 12);
                sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
-
+               break;
+       case PCI_DEVICE_ID_O2_GG8_9860:
+       case PCI_DEVICE_ID_O2_GG8_9861:
+       case PCI_DEVICE_ID_O2_GG8_9862:
+       case PCI_DEVICE_ID_O2_GG8_9863:
+               host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+               host->mmc->caps |= MMC_CAP_HW_RESET;
+               host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+               slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
                break;
        default:
                break;
@@ -684,6 +719,7 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 {
        int ret;
        u8 scratch;
+       u16 scratch16;
        u32 scratch_32;
 
        switch (chip->pdev->device) {
@@ -893,6 +929,46 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
                scratch |= 0x80;
                pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
                break;
+       case PCI_DEVICE_ID_O2_GG8_9860:
+       case PCI_DEVICE_ID_O2_GG8_9861:
+       case PCI_DEVICE_ID_O2_GG8_9862:
+       case PCI_DEVICE_ID_O2_GG8_9863:
+               /* UnLock WP */
+               ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+               if (ret)
+                       return ret;
+               scratch &= 0x7f;
+               pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+               /* Select mode switch source as software control */
+               pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
+               scratch16 &= 0xF8FF;
+               scratch16 |= BIT(9);
+               pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
+
+               /* set VDD1 supply source */
+               pci_read_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, &scratch16);
+               scratch16 &= 0xFFE3;
+               scratch16 |= BIT(3);
+               pci_write_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, scratch16);
+
+               /* Set host drive strength*/
+               scratch16 = 0x0025;
+               pci_write_config_word(chip->pdev, O2_SD_PLL_SETTING, scratch16);
+
+               /* Set output delay*/
+               pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+               scratch_32 &= 0xFF0FFF00;
+               scratch_32 |= 0x00B0003B;
+               pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
+
+               /* Lock WP */
+               ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+               if (ret)
+                       return ret;
+               scratch |= 0x80;
+               pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+               break;
        }
 
        return 0;
drivers/mmc/host/sdhci-pci.h +4 -0
index 9c8863956381..153704f812ed 100644
@@ -11,6 +11,10 @@
 #define PCI_DEVICE_ID_O2_FUJIN2                0x8520
 #define PCI_DEVICE_ID_O2_SEABIRD0      0x8620
 #define PCI_DEVICE_ID_O2_SEABIRD1      0x8621
+#define PCI_DEVICE_ID_O2_GG8_9860      0x9860
+#define PCI_DEVICE_ID_O2_GG8_9861      0x9861
+#define PCI_DEVICE_ID_O2_GG8_9862      0x9862
+#define PCI_DEVICE_ID_O2_GG8_9863      0x9863
 
 #define PCI_DEVICE_ID_INTEL_PCH_SDIO0  0x8809
 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1  0x880a

base-commit: 25aa0bebba72b318e71fe205bfd1236550cc9534 --
2.25.1