arm64: dts: imx8mp-evk: Add HDMI support
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/2 arm64: dts: imx8mp-evk: Add HDMI support
From: Fabio Estevam <[email protected]>
imx8mp-evk has a MIPI DSI port that can be used with a ADV7535 MIPI DSI to HDMI bridge.
Add support for it.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 66 ++++++++++++++++++++ 1 file changed, 66 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp-evk.dts +66 -0
@@ -16,6 +16,18 @@ chosen { stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default";
@@ -378,6 +390,40 @@ &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; + reg-names = "main", "cec", "edid", "packet"; + adi,dsi-lanes = <4>; + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + + }; + }; }; &i2c3 {
@@ -443,6 +489,26 @@ &i2c5 { */ }; +&lcdif1 { + status = "okay"; +}; + +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&adv7533_in>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; clocks = <&pcie0_refclk>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 2/2 arm64: defconfig: Enable CONFIG_DRM_IMX_LCDIF
From: Fabio Estevam <[email protected]>
Enable CONFIG_DRM_IMX_LCDIF so that display output can be functional by default on the imx8mp-evk board.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -865,6 +865,7 @@ CONFIG_DRM_MEDIATEK=m CONFIG_DRM_MEDIATEK_HDMI=m CONFIG_DRM_MXSFB=m CONFIG_DRM_MESON=m +CONFIG_DRM_IMX_LCDIF=m CONFIG_DRM_PL111=m CONFIG_DRM_LIMA=m CONFIG_DRM_PANFROST=m
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
imx8mp-evk has a MIPI DSI port that can be used with a ADV7535 MIPI DSI to HDMI bridge.
Add support for it.
Signed-off-by Fabio Estevam <[email protected]>
Applied both, thanks!
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel