bus: mhi: host: pci_generic: add support for Telit FE990
Subsystems (2)
PATCH 1/1 bus: mhi: host: pci_generic: add support for Telit FE990
Add support for Telit FE990 that has the same configuration than FN990:
$ lspci -vv
04:00.0 Unassigned class [ff00]: Qualcomm Device 0308
Subsystem: Device 1c5d:2015Signed-off-by Daniele Palmas <[email protected]>
--- drivers/bus/mhi/host/pci_generic.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/bus/mhi/host/pci_generic.c +3 -0
@@ -595,6 +595,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* Telit FN990 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, +/* Telit FE990, same configuration than FN990 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), + .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
Signature · 1 line
2.37.1
Quoted 1 line · Daniele Palmas
Add support for Telit FE990 that has the same configuration than FN990:
s/than/as
Quoted 6 lines
$ lspci -vv 04:00.0 Unassigned class [ff00]: Qualcomm Device 0308 Subsystem: Device 1c5d:2015Signed-off-by Daniele Palmas <[email protected]>
Reviewed-by Manivannan Sadhasivam <[email protected]>
drivers/bus/mhi/host/pci_generic.c static const struct pci_device_id mhi_pci_id_table[] = { · line 598
Quoted 13 lines
--- drivers/bus/mhi/host/pci_generic.c | 3 +++ 1 file changed, 3 insertions(+)drivers/bus/mhi/host/pci_generic.c +1
-0@@ -595,6 +595,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* Telit FN990 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, +/* Telit FE990, same configuration than FN990 */
No need to mention configuration here.
- Mani
Quoted 9 lines
drivers/bus/mhi/host/pci_generic.c +2
-0+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), + .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */Signature · 1 line
2.37.1
Signature · 1 line
மணிவண்ணன் சதாசிவம்
Quoted 7 lines · Daniele Palmas
Add support for Telit FE990 that has the same configuration than FN990:
$ lspci -vv 04:00.0 Unassigned class [ff00]: Qualcomm Device 0308 Subsystem: Device 1c5d:2015Signed-off-by Daniele Palmas <[email protected]>
Applied to mhi-next with suggested changes!
- Mani
Quoted 22 lines
--- drivers/bus/mhi/host/pci_generic.c | 3 +++ 1 file changed, 3 insertions(+)drivers/bus/mhi/host/pci_generic.c +3
-0@@ -595,6 +595,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* Telit FN990 */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010), .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, +/* Telit FE990, same configuration than FN990 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2015), + .driver_data = (kernel_ulong_t) &mhi_telit_fn990_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info }, { PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */Signature · 1 line
2.37.1
Signature · 1 line
மணிவண்ணன் சதாசிவம்