FAILED: patch "[PATCH] cpuidle: psci: Move enabling OSI mode after power domains" failed to apply to 6.1-stable tree
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 12acb348fa4528a4203edf1cce7a3be2c9af2279
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023081238-transform-anybody-0d1c@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
12acb348fa45 ("cpuidle: psci: Move enabling OSI mode after power domains creation") 668057b07db0 ("cpuidle: psci: Extend information in log about OSI/PC mode")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 12acb348fa4528a4203edf1cce7a3be2c9af2279 Mon Sep 17 00:00:00 2001
From: Maulik Shah <[email protected]>
Date: Mon, 3 Jul 2023 14:25:54 +0530
Subject: [PATCH] cpuidle: psci: Move enabling OSI mode after power domains
creation
A switch from OSI to PC mode is only possible if all CPUs other than the calling one are OFF, either through a call to CPU_OFF or not yet booted.
Currently OSI mode is enabled before power domains are created. In cases where CPUidle states are not using hierarchical CPU topology the bail out path tries to switch back to PC mode which gets denied by firmware since other CPUs are online at this point and creates inconsistent state as firmware is in OSI mode and Linux in PC mode.
This change moves enabling OSI mode after power domains are created, this would makes sure that hierarchical CPU topology is used before switching firmware to OSI mode.
drivers/cpuidle/cpuidle-psci-domain.c +13 -26
@@ -120,20 +120,6 @@ static void psci_pd_remove(void) } } -static bool psci_pd_try_set_osi_mode (void ) -{ -int ret; - -if (!psci_has_osi_support ()) -return false; - - ret =psci_set_osi_mode (true); -if (ret) -return false; - -return true; -} -static void psci_cpuidle_domain_sync_state (struct device *dev) {/*
@@ -152,15 +138,12 @@ static int psci_cpuidle_domain_probe(struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node;struct device_node *node; -bool use_osi; +bool use_osi =psci_has_osi_support ();int ret =0 , pd_count =0 ;if (!np)return -ENODEV ; -/* If OSI mode is supported, let's try to enable it. */ - use_osi =psci_pd_try_set_osi_mode (); -/* * Parse child nodes for the "#power-domain-cells" property and * initialize a genpd/genpd-of-provider pair when it's found.
@@ -170,33 +153,37 @@ static int psci_cpuidle_domain_probe(struct platform_device *pdev)continue ; ret =psci_pd_init (node, use_osi); -if (ret) - goto put_node; +if (ret) { +of_node_put (node); + goto exit; + } pd_count++; }/* Bail out if not using the hierarchical CPU topology. */ if (!pd_count) - goto no_pd; +return 0 ;/* Link genpd masters/subdomains to model the CPU topology. */ ret =dt_idle_pd_init_topology (np);if (ret) goto remove_pd; +/* let's try to enable OSI. */ + ret =psci_set_osi_mode (use_osi); +if (ret) + goto remove_pd; +pr_info ("Initialized CPU PM domain topology using %s mode\n" , use_osi ?"OSI" :"PC" );return 0 ; -put_node: -of_node_put (node); remove_pd: +dt_idle_pd_remove_topology (np);psci_pd_remove (); +exit:pr_err ("failed to create CPU PM domains ret=%d\n" , ret); -no_pd: -if (use_osi) -psci_set_osi_mode (false);return ret; }