Skip to contentSkip to conversation

FAILED: patch "[PATCH] scsi: qedf: Fix firmware halt over suspend and resume" failed to apply to 4.14-stable tree

PATCH [email protected] 1 participant 1 message Aug 13, 2023

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y
git checkout FETCH_HEAD
git cherry-pick -x ef222f551e7c4e2008fc442ffc9edcd1a7fd8f63
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023081353-arguably-darkness-ec85@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^..

Possible dependencies:

ef222f551e7c ("scsi: qedf: Fix firmware halt over suspend and resume") f6b172f21999 ("scsi: qedf: Add schedule recovery handler")
6e7c8eea929e ("scsi: qedf: Implement callback for bw_update")
31696204c44c ("scsi: qedf: Add shutdown callback handler")
5f85942c2ea2 ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From ef222f551e7c4e2008fc442ffc9edcd1a7fd8f63 Mon Sep 17 00:00:00 2001
From: Nilesh Javali <[email protected]>
Date: Mon, 7 Aug 2023 15:07:24 +0530
Subject: [PATCH] scsi: qedf: Fix firmware halt over suspend and resume

While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However the hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware.

To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode.

Fixes 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
drivers/scsi/qedf/qedf_main.c +18 -0
index 2a31ddc99dde..7825765c936c 100644
@@ -31,6 +31,7 @@ static void qedf_remove(struct pci_dev *pdev);
 static void qedf_shutdown(struct pci_dev *pdev);
 static void qedf_schedule_recovery_handler(void *dev);
 static void qedf_recovery_handler(struct work_struct *work);
+static int qedf_suspend(struct pci_dev *pdev, pm_message_t state);
 
 /*
  * Driver module parameters.
@@ -3271,6 +3272,7 @@ static struct pci_driver qedf_pci_driver = {
 	.probe = qedf_probe,
 	.remove = qedf_remove,
 	.shutdown = qedf_shutdown,
+	.suspend = qedf_suspend,
 };
 
 static int __qedf_probe(struct pci_dev *pdev, int mode)
@@ -4000,6 +4002,22 @@ static void qedf_shutdown(struct pci_dev *pdev)
 	__qedf_remove(pdev, QEDF_MODE_NORMAL);
 }
 
+static int qedf_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct qedf_ctx *qedf;
+
+	if (!pdev) {
+		QEDF_ERR(NULL, "pdev is NULL.\n");
+		return -ENODEV;
+	}
+
+	qedf = pci_get_drvdata(pdev);
+
+	QEDF_ERR(&qedf->dbg_ctx, "%s: Device does not support suspend operation\n", __func__);
+
+	return -EPERM;
+}
+
 /*
  * Recovery handler code
  */