virtio-net: support the RSS context
PATCH 1/1 virtio-net: support the RSS context
Commit 84a1d9c48200 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") adds support for RSS context as a destination for receive flow filters (pls see https://lists.oasis-open. org/archives/virtio-comment/202308/msg00194.html).
An RSS context consists of configurable parameters specified by receive-side scaling.
Usecase:
When users want some data flows to be steered to specific multiple rxqs, they can set receive flow filter rules for these data flows to an RSS context with desired rxqs.
How to set/configure an RSS context:
Assuming no RSS context has been created before.
1. ethtool -X eth0 context new start 5 equal 8
This command creates an RSS context with an id=1 for eth0, and fills in the indirection table with rxq indexes 5-8 circularly. The hash key and hash types reuse the default RSS configuration.
Then, we can use 'ethtool -x eth0 context 1' to query the above configuration.
2. ethtool -X eth0 context new start 6 equal 7 \
hkey 8f:bf:dd:11:23:58:d2:8a:00:31:d0:32:a3:b5:1f:\
1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3
This command creates an RSS context with an id=2 for eth0, and fills in the indirection table with rxq indexes 6-7 circularly. The hash key is 8f:bf:dd:11:23:58:d2:8a:00:31:d0\
:32:a3:b5:1f:1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3. Hash types reuse the default RSS configuration.
3. ethtool -N eth0 rx-flow-hash tcp4 sdfn context 1
This command specifies the hash types for the RSS context whose id=1 on eth0. Now this RSS context only has the hash key to reuse the default RSS configuration.
4. ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 context 1
This command configures a receive flow filter rule for eth0, and the data flow matching this rule will continue to select the final rxq according to the RSS context configuration with id=1.
--- device-types/net/description.tex | 70 +++++++++++++++++++++++++ device-types/net/driver-conformance.tex | 1 + 2 files changed, 71 insertions(+)
device-types/net/description.tex +70 -0
@@ -88,6 +88,8 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control channel. +\item[VIRTIO_NET_F_RSS_CONTEXT(50)] Device supports multiple RSS contexts. + \item[VIRTIO_NET_F_HASH_TUNNEL(51)] Device supports inner header hash for encapsulated packets. \item[VIRTIO_NET_F_VQ_NOTF_COAL(52)] Device supports virtqueue notification coalescing.
@@ -150,6 +152,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device \item[VIRTIO_NET_F_RSS] Requires VIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_VQ_NOTF_COAL] Requires VIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_HASH_TUNNEL] Requires VIRTIO_NET_F_CTRL_VQ along with VIRTIO_NET_F_RSS or VIRTIO_NET_F_HASH_REPORT. +\item[VIRTIO_NET_F_RSS_CONTEXT] Requires VIRTIO_NET_F_CTRL_VQ and VIRTIO_NET_F_RSS. \end{description} \subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Network Device / Feature bits / Legacy Interface: Feature bits}
@@ -179,6 +182,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device le16 rss_max_indirection_table_length; le32 supported_hash_types; le32 supported_tunnel_types; + le16 max_rss_contexts; + le16 reserved; }; \end{lstlisting}
@@ -235,6 +240,12 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device Encapsulation types are defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets / Encapsulation types supported/enabled for inner header hash}. +Field \field{max_rss_contexts} only exists if VIRTIO_NET_F_RSS_CONTEXT is set. +This field specifies the maximum number of RSS contexts \ref{sec:Device Types / Network Device / +Device Operation / Control Virtqueue / RSS Context} supported by the device. + +Field \field{reserved} contains zeroes and is reserved. + \devicenormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout} The device MUST set \field{max_virtqueue_pairs} to between 1 and 0x8000 inclusive,
@@ -285,6 +296,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device The device SHOULD NOT offer VIRTIO_NET_F_CTRL_RX_EXTRA if it does not offer VIRTIO_NET_F_CTRL_VQ. +The device MUST set \field{max_rss_contexts} to at least 1 if it offers VIRTIO_NET_F_RSS_CONTEXT. + \drivernormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout} The driver MUST NOT write to any of the device configuration fields.
@@ -1606,6 +1619,63 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi \item If the destination receive queue is being reset (See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet. \end{itemize} +\paragraph{RSS Context}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context} + +An RSS context consists of configurable parameters specified by \ref{sec:Device Types / Network Device +/ Device Operation / Control Virtqueue / Receive-side scaling (RSS)}. + +The RSS configuration supported by the VIRTIO_NET_F_RSS feature is implicitly considered the default RSS context. + +The device offers the feature VIRTIO_NET_F_RSS_CONTEXT if it supports one or more RSS contexts (excluding the default RSS context +supported by VIRTIO_NET_F_RSS) and configurable parameters. + +\begin{lstlisting} +struct virtnet_rss_ctx_add_modify { + u8 rss_ctx_id; + u8 padding[3]; + struct virtio_net_rss_config rss; +}; + +struct virtnet_rss_ctx_del { + u8 rss_ctx_id; +}; + +#define VIRTNET_RSS_CTX_CTRL 8 + #define VIRTNET_RSS_CTX_CTRL_ADD 0 + #define VIRTNET_RSS_CTX_CTRL_MOD 1 + #define VIRTNET_RSS_CTX_CTRL_DEL 2 +\end{lstlisting} + +RSS context parameters: +\begin{itemize} +\item \field{rss_ctx_id}: ID of the specific RSS context. +\item \field{rss}: Configure the specific RSS context whose id is \field{rss_ctx_id}. +\end{itemize} + +\field{padding} is reserved and it is ignored by the device. + +If the feature VIRTIO_NET_F_RSS_CONTEXT has been negotiated, the driver can send the following +VIRTNET_RSS_CTX_CTRL class commands to configure a specific RSS context: +\begin{enumerate} +\item VIRTNET_RSS_CTX_CTRL_ADD: use the structure virtnet_rss_ctx_add_modify to + add an RSS context configured as \field{rss} and id as \field{rss_ctx_id} for the device. +\item VIRTNET_RSS_CTX_CTRL_MOD: use the structure virtnet_rss_ctx_add_modify to + configure parameters of the RSS context whose id is \field{rss_ctx_id} as \field{rss} for the device. +\item VIRTNET_RSS_CTX_CTRL_DEL: use the structure virtnet_rss_ctx_del to delete + the RSS context whose id is \field{rss_ctx_id} for the device. +\end{enumerate} + +For VIRTNET_RSS_CTX_CTRL_ADD and VIRTNET_RSS_CTX_CTRL_MOD commands, the structure virtnet_rss_ctx_add_modify is read-only for the device. +For the VIRTNET_RSS_CTX_CTRL_DEL command, the structure virtnet_rss_ctx_del is read-only for the device. + +\drivernormative{\subparagraph}{RSS Context}{Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context} + +The driver MUST have negotiated the VIRTIO_NET_F_RSS_CONTEXT feature when issuing the VIRTNET_RSS_CTX_CTRL class commands. + +The driver MUST set \field{rss_ctx_id} to between 1 and \field{max_rss_contexts} inclusive. + +The driver MUST NOT send the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command when the device has responded to the VIRTNET_RSS_CTX_CTRL_ADD command with VIRTIO_NET_OK. + \paragraph{Offloads State Configuration}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration} If the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature is negotiated, the driver can
device-types/net/driver-conformance.tex +1 -0
@@ -15,4 +15,5 @@ \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) } \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing} \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Inner Header Hash} +\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context} \end{itemize}
Signature · 18 lines
2.19.1.6.gb485710b This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC. In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting. Subscribe: [email protected] Unsubscribe: [email protected] List help: [email protected] List archive: https://lists.oasis-open.org/archives/virtio-comment/ Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists Committee: https://www.oasis-open.org/committees/virtio/ Join OASIS: https://www.oasis-open.org/join/
Probably worth to clarify: what is the expected persistency of the RSS
context: is it expected to survive device reset? powerdown cycle? If there is some level of persistency, how can external software know what contexts that the device contains?
Should the sub-command be defined to apply one of saved contexts?
Thanks,
Yuri
Quoted 260 lines · Heng Qi
Commit
84a1d9c48200("net: ethtool: extend RXNFC API to support RSS spreading of
filter matches") adds support for RSS context as a destination for receive flow filters
(pls see https://lists.oasis-open.
org/archives/virtio-comment/202308/msg00194.html).An RSS context consists of configurable parameters specified by receive-side scaling.
Usecase:
When users want some data flows to be steered to specific multiple rxqs, they can set
receive flow filter rules for these data flows to an RSS context with desired rxqs.How to set/configure an RSS context:
Assuming no RSS context has been created before.
1. ethtool -X eth0 context new start 5 equal 8This command creates an RSS context with an id=1 for eth0, and fills in the indirection
table with rxq indexes 5-8 circularly. The hash key and hash types reuse the default
RSS configuration.Then, we can use 'ethtool -x eth0 context 1' to query the above configuration.
2. ethtool -X eth0 context new start 6 equal 7 \ hkey 8f:bf:dd:11:23:58:d2:8a:00:31:d0:32:a3:b5:1f:\1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3
This command creates an RSS context with an id=2 for eth0, and fills in the indirection
table with rxq indexes 6-7 circularly. The hash key is 8f:bf:dd:11:23:58:d2:8a:00:31:d0\:32:a3:b5:1f:1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3. Hash types reuse the default RSS configuration.
3. ethtool -N eth0 rx-flow-hash tcp4 sdfn context 1
This command specifies the hash types for the RSS context whose id=1 on eth0.
Now this RSS context only has the hash key to reuse the default RSS configuration.4. ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 context 1
This command configures a receive flow filter rule for eth0, and the data flow matching
this rule will continue to select the final rxq according to the RSS context configuration
with id=1.Signed-off-by Heng Qi <[email protected]>--- device-types/net/description.tex | 70 +++++++++++++++++++++++++ device-types/net/driver-conformance.tex | 1 + 2 files changed, 71 insertions(+)device-types/net/description.tex +0
-0@@ -88,6 +88,8 @@ \subsection{Feature bits}\label{sec:Device Types /Network Device / Feature bits
\item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.+\item[VIRTIO_NET_F_RSS_CONTEXT(50)] Device supports multiple RSS contexts. +
\item[VIRTIO_NET_F_HASH_TUNNEL(51)] Device supports inner header hash for
encapsulated packets.\item[VIRTIO_NET_F_VQ_NOTF_COAL(52)] Device supports virtqueue
notification coalescing.device-types/net/description.tex +0
-0@@ -150,6 +152,7 @@ \subsubsection{Feature bitrequirements}\label{sec:Device Types / Network Device
\item[VIRTIO_NET_F_RSS] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_VQ_NOTF_COAL] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_HASH_TUNNEL] RequiresVIRTIO_NET_F_CTRL_VQalong withVIRTIO_NET_F_RSSorVIRTIO_NET_F_HASH_REPORT. +\item[VIRTIO_NET_F_RSS_CONTEXT] RequiresVIRTIO_NET_F_CTRL_VQandVIRTIO_NET_F_RSS.
\end{description}\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types /
Network Device / Feature bits / Legacy Interface: Feature bits}device-types/net/description.tex +0
-0@@ -179,6 +182,8 @@ \subsection{Device configurationlayout}\label{sec:Device Types / Network Device
le16 rss_max_indirection_table_length; le32 supported_hash_types; le32 supported_tunnel_types;device-types/net/description.tex +2
-0+ le16 max_rss_contexts; + le16 reserved; }; \end{lstlisting}@@ -235,6 +240,12 @@ \subsection{Device configurationlayout}\label{sec:Device Types / Network Device
Encapsulation types are defined in \ref{sec:Device Types / Network Device
/ Device Operation / Processing of Incoming Packets /
Hash calculation for incoming packets / Encapsulation types
supported/enabled for inner header hash}.+Field \field{max_rss_contexts} only exists if
VIRTIO_NET_F_RSS_CONTEXTis set.
+This field specifies the maximum number of RSS contexts \ref{sec:Device Types / Network Device /
+Device Operation / Control Virtqueue / RSS Context} supported by the device.device-types/net/description.tex +3
-0+ +Field \field{reserved} contains zeroes and is reserved. + \devicenormative{\subsubsection}{Device configuration layout}{DeviceTypes / Network Device / Device configuration layout}
The device MUST set \field{max_virtqueue_pairs} to between 1 and
0x8000
inclusive,device-types/net/description.tex +0
-0@@ -285,6 +296,8 @@ \subsection{Device configurationlayout}\label{sec:Device Types / Network Device
The device SHOULD NOT offerVIRTIO_NET_F_CTRL_RX_EXTRAif it does not offerVIRTIO_NET_F_CTRL_VQ.+The device MUST set \field{max_rss_contexts} to at least 1 if it offers
VIRTIO_NET_F_RSS_CONTEXT.
+
\drivernormative{\subsubsection}{Device configuration layout}{Device
Types / Network Device / Device configuration layout}The driver MUST NOT write to any of the device configuration fields.
device-types/net/description.tex +0
-0@@ -1606,6 +1619,63 @@ \subsubsection{Control Virtqueue}\label{sec:DeviceTypes / Network Device / Devi
\item If the destination receive queue is being reset (See \ref{sec:Basic
Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet.
\end{itemize}+\paragraph{RSS Context}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context}
device-types/net/description.tex +2
-0+ +An RSS context consists of configurable parameters specified by\ref{sec:Device Types / Network Device
device-types/net/description.tex +3
-0+/ Device Operation / Control Virtqueue / Receive-side scaling (RSS)}. + +The RSS configuration supported by the VIRTIO_NET_F_RSS feature isimplicitly considered the default RSS context.
device-types/net/description.tex +2
-0+ +The device offers the feature VIRTIO_NET_F_RSS_CONTEXT if it supports oneor more RSS contexts (excluding the default RSS context
device-types/net/description.tex +23
-0+supported by VIRTIO_NET_F_RSS) and configurable parameters. + +\begin{lstlisting} +struct virtnet_rss_ctx_add_modify { + u8 rss_ctx_id; + u8 padding[3]; + struct virtio_net_rss_config rss; +}; + +struct virtnet_rss_ctx_del { + u8 rss_ctx_id; +}; + +#define VIRTNET_RSS_CTX_CTRL 8 + #define VIRTNET_RSS_CTX_CTRL_ADD 0 + #define VIRTNET_RSS_CTX_CTRL_MOD 1 + #define VIRTNET_RSS_CTX_CTRL_DEL 2 +\end{lstlisting} + +RSS context parameters: +\begin{itemize} +\item \field{rss_ctx_id}: ID of the specific RSS context. +\item \field{rss}: Configure the specific RSS context whose id is\field{rss_ctx_id}.
+\end{itemize}device-types/net/description.tex +4
-0+ +\field{padding} is reserved and it is ignored by the device. + +If the feature VIRTIO_NET_F_RSS_CONTEXT has been negotiated, the drivercan send the following
+VIRTNET_RSS_CTX_CTRL class commands to configure a specific RSS context:
+\begin{enumerate}
+\itemVIRTNET_RSS_CTX_CTRL_ADD: use the structurevirtnet_rss_ctx_add_modifyto
+ add an RSS context configured as \field{rss} and id as
\field{rss_ctx_id} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_MOD: use the structurevirtnet_rss_ctx_add_modifyto
+ configure parameters of the RSS context whose id is
\field{rss_ctx_id} as \field{rss} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_DEL: use the structurevirtnet_rss_ctx_delto deletedevice-types/net/description.tex +4
-0+ the RSS context whose id is \field{rss_ctx_id} for the device. +\end{enumerate} + +For VIRTNET_RSS_CTX_CTRL_ADD and VIRTNET_RSS_CTX_CTRL_MOD commands, thestructure
virtnet_rss_ctx_add_modifyis read-only for the device. +For theVIRTNET_RSS_CTX_CTRL_DELcommand, the structurevirtnet_rss_ctx_delis read-only for the device.
+
+\drivernormative{\subparagraph}{RSS Context}{Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context}device-types/net/description.tex +2
-0+ +The driver MUST have negotiated the VIRTIO_NET_F_RSS_CONTEXT feature whenissuing the
VIRTNET_RSS_CTX_CTRLclass commands.device-types/net/description.tex +2
-0+ +The driver MUST set \field{rss_ctx_id} to between 1 and\field{max_rss_contexts} inclusive.
device-types/net/description.tex +2
-0+ +The driver MUST NOT send the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command whenthe device has responded to the
VIRTNET_RSS_CTX_CTRL_ADDcommand withVIRTIO_NET_OK.
+
\paragraph{Offloads State Configuration}\label{sec:Device Types / Network
Device / Device Operation / Control Virtqueue / Offloads State Configuration}If the
VIRTIO_NET_F_CTRL_GUEST_OFFLOADSfeature is negotiated, the driver
candevice-types/net/driver-conformance.tex +0
-0@@ -15,4 +15,5 @@ \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) } \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing} \item \ref{drivernormative:Device Types / Network Device / DeviceOperation / Control Virtqueue / Inner Header Hash} +\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context}
\end{itemize}
--
2.19.1.6.gb485710bThis publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected] List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines:
https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
Quoted 1 line · Yuri Benditovich
Probably worth to clarify: what is the expected persistency of the RSS context:
Ok.
Quoted 1 line
is it expected to survive device reset?
No, after device reset, rss contexts are cleared.
Quoted 1 line
powerdown cycle?
Do you mean the host?
If yes, there is no rss context anymore because the host ram is reset. If no, I think this is the same as the device reset.
Thanks.
Quoted 261 lines
If there is some level of persistency, how can external software know what contexts that the device contains? Should the sub-command be defined to apply one of saved contexts?
Thanks,
YuriOn Tue, Aug 15, 2023 at 3:36 PM Heng Qi <[email protected]> wrote:
Commit
84a1d9c48200("net: ethtool: extend RXNFC API to support RSS spreading of
filter matches") adds support for RSS context as a destination for receive flow filters
(pls see https://lists.oasis-open.
org/archives/virtio-comment/202308/msg00194.html).An RSS context consists of configurable parameters specified by receive-side scaling.
Usecase:
When users want some data flows to be steered to specific multiple rxqs, they can set
receive flow filter rules for these data flows to an RSS context with desired rxqs.How to set/configure an RSS context:
Assuming no RSS context has been created before.
1. ethtool -X eth0 context new start 5 equal 8This command creates an RSS context with an id=1 for eth0, and fills in the indirection
table with rxq indexes 5-8 circularly. The hash key and hash types reuse the default
RSS configuration.Then, we can use 'ethtool -x eth0 context 1' to query the above configuration.
2. ethtool -X eth0 context new start 6 equal 7 \
hkey 8f:bf:dd:11:23:58:d2:8a:00:31:d0:32:a3:b5:1f:\
1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3This command creates an RSS context with an id=2 for eth0, and
fills in the indirection
table with rxq indexes 6-7 circularly. The hash key is 8f:bf:dd:11:23:58:d2:8a:00:31:d0\
:32:a3:b5:1f:1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3. Hash types reuse the default RSS configuration.3. ethtool -N eth0 rx-flow-hash tcp4 sdfn context 1
This command specifies the hash types for the RSS context whose id=1 on eth0.
Now this RSS context only has the hash key to reuse the default RSS configuration.4. ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 context 1
This command configures a receive flow filter rule for eth0, and the data flow matching
this rule will continue to select the final rxq according to the RSS context configuration
with id=1.Signed-off-by Heng Qi <[email protected]>---
device-types/net/description.tex | 70
+++++++++++++++++++++++++
device-types/net/driver-conformance.tex | 1 + 2 files changed, 71 insertions(+)diff --git a/device-types/net/description.tex b/device-types/net/description.tex
index 76585b0..2deb060 100644
--- a/device-types/net/description.tex
+++ b/device-types/net/description.tex
@@ -88,6 +88,8 @@ \subsection{Feature bits}\label{sec:Device Types / Network Device / Feature bits \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control channel.+\item[VIRTIO_NET_F_RSS_CONTEXT(50)] Device supports multiple RSS contexts.
+
\item[VIRTIO_NET_F_HASH_TUNNEL(51)] Device supports inner header hash for encapsulated packets.\item[VIRTIO_NET_F_VQ_NOTF_COAL(52)] Device supports virtqueue notification coalescing.
@@ -150,6 +152,7 @@ \subsubsection{Feature bit requirements}\label{sec:Device Types / Network Device \item[VIRTIO_NET_F_RSS] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_VQ_NOTF_COAL] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_HASH_TUNNEL] RequiresVIRTIO_NET_F_CTRL_VQalong withVIRTIO_NET_F_RSSorVIRTIO_NET_F_HASH_REPORT. +\item[VIRTIO_NET_F_RSS_CONTEXT] RequiresVIRTIO_NET_F_CTRL_VQandVIRTIO_NET_F_RSS.
\end{description}\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types / Network Device / Feature bits / Legacy Interface: Feature bits}
@@ -179,6 +182,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
le16rss_max_indirection_table_length;
le32supported_hash_types;
le32supported_tunnel_types;
+ le16max_rss_contexts;
+ le16 reserved;
};
\end{lstlisting}@@ -235,6 +240,12 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device Encapsulation types are defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets / Encapsulation types supported/enabled for inner header hash}.
+Field \field{max_rss_contexts} only exists if
VIRTIO_NET_F_RSS_CONTEXTis set.
+This field specifies the maximum number of RSS contexts \ref{sec:Device Types / Network Device /
+Device Operation / Control Virtqueue / RSS Context} supported by the device.
+
+Field \field{reserved} contains zeroes and is reserved. +
\devicenormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout}The device MUST set \field{max_virtqueue_pairs} to between 1 and
0x8000inclusive,
@@ -285,6 +296,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device
The device SHOULD NOT offerVIRTIO_NET_F_CTRL_RX_EXTRAif it does not offerVIRTIO_NET_F_CTRL_VQ.+The device MUST set \field{max_rss_contexts} to at least 1 if it offers
VIRTIO_NET_F_RSS_CONTEXT.
+
\drivernormative{\subsubsection}{Device configuration layout}{Device Types / Network Device / Device configuration layout}The driver MUST NOT write to any of the device configuration fields. @@ -1606,6 +1619,63 @@ \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi \item If the destination receive queue is being reset (See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet. \end{itemize}
+\paragraph{RSS Context}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context}
+
+An RSS context consists of configurable parameters specified by \ref{sec:Device Types / Network Device
+/ Device Operation / Control Virtqueue / Receive-side scaling (RSS)}. +
+The RSS configuration supported by theVIRTIO_NET_F_RSSfeature is implicitly considered the default RSS context.
+
+The device offers the featureVIRTIO_NET_F_RSS_CONTEXTif it supports one or more RSS contexts (excluding the default RSS context +supported byVIRTIO_NET_F_RSS) and configurable parameters. +
+\begin{lstlisting}
+structvirtnet_rss_ctx_add_modify{
+ u8rss_ctx_id;
+ u8 padding[3];
+ structvirtio_net_rss_configrss;
+};
+
+structvirtnet_rss_ctx_del{
+ u8rss_ctx_id;
+};
+
+#defineVIRTNET_RSS_CTX_CTRL8
+ #define VIRTNET_RSS_CTX_CTRL_ADD 0
+ #define VIRTNET_RSS_CTX_CTRL_MOD 1
+ #define VIRTNET_RSS_CTX_CTRL_DEL 2
+\end{lstlisting}
+
+RSS context parameters:
+\begin{itemize}
+\item \field{rss_ctx_id}: ID of the specific RSS context. +\item \field{rss}: Configure the specific RSS context whose id is \field{rss_ctx_id}.
+\end{itemize}
+
+\field{padding} is reserved and it is ignored by the device. +
+If the featureVIRTIO_NET_F_RSS_CONTEXThas been negotiated, the driver can send the following
+VIRTNET_RSS_CTX_CTRL class commands to configure a specific RSS context:
+\begin{enumerate}
+\itemVIRTNET_RSS_CTX_CTRL_ADD: use the structurevirtnet_rss_ctx_add_modifyto
+ add an RSS context configured as \field{rss} and id as \field{rss_ctx_id} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_MOD: use the structurevirtnet_rss_ctx_add_modifyto
+ configure parameters of the RSS context whose id is \field{rss_ctx_id} as \field{rss} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_DEL: use the structurevirtnet_rss_ctx_delto delete
+ the RSS context whose id is \field{rss_ctx_id} for the device. +\end{enumerate}
+
+ForVIRTNET_RSS_CTX_CTRL_ADDandVIRTNET_RSS_CTX_CTRL_MODcommands, the structurevirtnet_rss_ctx_add_modifyis read-only for the device.
+For theVIRTNET_RSS_CTX_CTRL_DELcommand, the structurevirtnet_rss_ctx_delis read-only for the device.
+
+\drivernormative{\subparagraph}{RSS Context}{Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context} +
+The driver MUST have negotiated theVIRTIO_NET_F_RSS_CONTEXTfeature when issuing theVIRTNET_RSS_CTX_CTRLclass commands. +
+The driver MUST set \field{rss_ctx_id} to between 1 and \field{max_rss_contexts} inclusive.
+
+The driver MUST NOT send theVIRTIO_NET_CTRL_MQ_VQ_PAIRS_SETcommand when the device has responded to theVIRTNET_RSS_CTX_CTRL_ADDcommand withVIRTIO_NET_OK.
+
\paragraph{Offloads State Configuration}\label{sec:Device Types / Network Device / Device Operation / Control Virtqueue / Offloads State Configuration}If the
VIRTIO_NET_F_CTRL_GUEST_OFFLOADSfeature is negotiated, the driver can
diff --git a/device-types/net/driver-conformance.tex b/device-types/net/driver-conformance.tex
index 9d853d9..22ff5c3 100644
--- a/device-types/net/driver-conformance.tex
+++ b/device-types/net/driver-conformance.tex
@@ -15,4 +15,5 @@
\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Receive-side scaling (RSS) } \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Notifications Coalescing} \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Inner Header Hash} +\item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / RSS Context} \end{itemize}
--
2.19.1.6.gb485710bThis publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Quoted 11 lines
Subscribe: [email protected]
Unsubscribe: [email protected] List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License:
https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines:
https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
Quoted 91 lines
From: Heng Qi <[email protected]>
Sent: Tuesday, August 15, 2023 6:07 PMCommit
84a1d9c48200("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") adds support for RSS context as a destination for receive flow filters (pls see https://lists.oasis-open. org/archives/virtio- comment/202308/msg00194.html).An RSS context consists of configurable parameters specified by receive-side scaling.
Usecase:
When users want some data flows to be steered to specific multiple rxqs, they can set receive flow filter rules for these data flows to an RSS context with desired rxqs.How to set/configure an RSS context:
Assuming no RSS context has been created before.
1. ethtool -X eth0 context new start 5 equal 8This command creates an RSS context with an id=1 for eth0, and fills in the indirection table with rxq indexes 5-8 circularly. The hash key and hash types reuse the default RSS configuration.
Then, we can use 'ethtool -x eth0 context 1' to query the above configuration.
2. ethtool -X eth0 context new start 6 equal 7 \ hkey 8f:bf:dd:11:23:58:d2:8a:00:31:d0:32:a3:b5:1f:\ 1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3This command creates an RSS context with an id=2 for eth0, and fills in the indirection table with rxq indexes 6-7 circularly. The hash key is 8f:bf:dd:11:23:58:d2:8a:00:31:d0\
:32:a3:b5:1f:1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4 d:c8:f3.
Hash types reuse the default RSS configuration.3. ethtool -N eth0 rx-flow-hash tcp4 sdfn context 1
This command specifies the hash types for the RSS context whose id=1 on eth0. Now this RSS context only has the hash key to reuse the default RSS configuration.
4. ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 context 1
This command configures a receive flow filter rule for eth0, and the data flow matching this rule will continue to select the final rxq according to the RSS context configuration with id=1.
Signed-off-by Heng Qi <[email protected]>--- device-types/net/description.tex | 70 +++++++++++++++++++++++++ device-types/net/driver-conformance.tex | 1 + 2 files changed, 71 insertions(+)device-types/net/description.tex +0
-0@@ -88,6 +88,8 @@ \subsection{Feature bits}\label{sec:Device Types /Network Device / Feature bits \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.+\item[VIRTIO_NET_F_RSS_CONTEXT(50)] Device supports multiple RSS contexts.
+
\item[VIRTIO_NET_F_HASH_TUNNEL(51)] Device supports inner header hash
for encapsulated packets.\item[VIRTIO_NET_F_VQ_NOTF_COAL(52)] Device supports virtqueue
notification coalescing.device-types/net/description.tex +0
-0@@ -150,6 +152,7 @@ \subsubsection{Feature bitrequirements}\label{sec:Device Types / Network Device \item[VIRTIO_NET_F_RSS] Requires
VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_VQ_NOTF_COAL] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_HASH_TUNNEL] RequiresVIRTIO_NET_F_CTRL_VQalong
withVIRTIO_NET_F_RSSorVIRTIO_NET_F_HASH_REPORT. +\item[VIRTIO_NET_F_RSS_CONTEXT] RequiresVIRTIO_NET_F_CTRL_VQandVIRTIO_NET_F_RSS.
\end{description}\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types /
Network Device / Feature bits / Legacy Interface: Feature bits} @@ -179,6 +182,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Devicele16 rss_max_indirection_table_length; le32 supported_hash_types; le32 supported_tunnel_types;
device-types/net/description.tex \subsection{Device configuration layout}\label{sec:Device Types / Network Device · line 186
Quoted 2 lines
device-types/net/description.tex +2
-0+ le16 max_rss_contexts; + le16 reserved;
As we discussed in past, virtio net device do not need to keep expanding (a) one time read fields and (b) which are used very late in driver life or sometime never read. They are supposed to be queried over dma interface, which is cvq for net.
Lets please revise this as base line
Quoted 51 lines
};
\end{lstlisting}device-types/net/description.tex +0
-0@@ -235,6 +240,12 @@ \subsection{Device configurationlayout}\label{sec:Device Types / Network Device Encapsulation types are defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets / Encapsulation types supported/enabled for inner header hash}.
+Field \field{max_rss_contexts} only exists if
VIRTIO_NET_F_RSS_CONTEXTis set.device-types/net/description.tex +2
-0+This field specifies the maximum number of RSS contexts \ref{sec:Device +Types / Network Device / Device Operation / Control Virtqueue / RSS Context}supported by the device.
device-types/net/description.tex +3
-0+ +Field \field{reserved} contains zeroes and is reserved. + \devicenormative{\subsubsection}{Device configuration layout}{Device Types /Network Device / Device configuration layout}
The device MUST set \field{max_virtqueue_pairs} to between 1 and
0x8000
inclusive, @@ -285,6 +296,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device The device SHOULD NOT offerVIRTIO_NET_F_CTRL_RX_EXTRAif it does not offerVIRTIO_NET_F_CTRL_VQ.+The device MUST set \field{max_rss_contexts} to at least 1 if it offers
VIRTIO_NET_F_RSS_CONTEXT.
+
\drivernormative{\subsubsection}{Device configuration layout}{Device Types /
Network Device / Device configuration layout}The driver MUST NOT write to any of the device configuration fields.
device-types/net/description.tex +0
-0@@ -1606,6 +1619,63 @@ \subsubsection{Control Virtqueue}\label{sec:DeviceTypes / Network Device / Devi \item If the destination receive queue is being reset (See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet.
\end{itemize}+\paragraph{RSS Context}\label{sec:Device Types / Network Device /
device-types/net/description.tex +4
-0+Device Operation / Control Virtqueue / RSS Context} + +An RSS context consists of configurable parameters specified by +\ref{sec:Device Types / Network Device / Device Operation / ControlVirtqueue / Receive-side scaling (RSS)}.
device-types/net/description.tex +2
-0+ +The RSS configuration supported by the VIRTIO_NET_F_RSS feature isimplicitly considered the default RSS context.
device-types/net/description.tex +3
-0+ +The device offers the feature VIRTIO_NET_F_RSS_CONTEXT if it supports +one or more RSS contexts (excluding the default RSS context supported by
VIRTIO_NET_F_RSS) and configurable parameters.
device-types/net/description.tex \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi · line 1634
Quoted 4 lines
device-types/net/description.tex +4
-0+ +\begin{lstlisting} +struct virtnet_rss_ctx_add_modify { + u8 rss_ctx_id;
Please double check if this can be le16, even though current may be limited to 256.
Quoted 72 lines
device-types/net/description.tex +18
-0+ u8 padding[3]; + struct virtio_net_rss_config rss; +}; + +struct virtnet_rss_ctx_del { + u8 rss_ctx_id; +}; + +#define VIRTNET_RSS_CTX_CTRL 8 + #define VIRTNET_RSS_CTX_CTRL_ADD 0 + #define VIRTNET_RSS_CTX_CTRL_MOD 1 + #define VIRTNET_RSS_CTX_CTRL_DEL 2 +\end{lstlisting} + +RSS context parameters: +\begin{itemize} +\item \field{rss_ctx_id}: ID of the specific RSS context. +\item \field{rss}: Configure the specific RSS context whose id is\field{rss_ctx_id}.
+\end{itemize}device-types/net/description.tex +5
-0+ +\field{padding} is reserved and it is ignored by the device. + +If the feature VIRTIO_NET_F_RSS_CONTEXT has been negotiated, the driver +can send the following VIRTNET_RSS_CTX_CTRL class commands to configurea specific RSS context:
+\begin{enumerate}
+\itemVIRTNET_RSS_CTX_CTRL_ADD: use the structurevirtnet_rss_ctx_add_modifyto
+ add an RSS context configured as \field{rss} and id as \field{rss_ctx_id} for
the device.
+\itemVIRTNET_RSS_CTX_CTRL_MOD: use the structurevirtnet_rss_ctx_add_modifyto
+ configure parameters of the RSS context whose id is \field{rss_ctx_id} as
\field{rss} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_DEL: use the structurevirtnet_rss_ctx_delto deletedevice-types/net/description.tex +4
-0+ the RSS context whose id is \field{rss_ctx_id} for the device. +\end{enumerate} + +For VIRTNET_RSS_CTX_CTRL_ADD and VIRTNET_RSS_CTX_CTRL_MODcommands, the structure
virtnet_rss_ctx_add_modifyis read-only for the device.
+For theVIRTNET_RSS_CTX_CTRL_DELcommand, the structurevirtnet_rss_ctx_delis read-only for the device.device-types/net/description.tex +5
-0+ +\drivernormative{\subparagraph}{RSS Context}{Device Types / Network +Device / Device Operation / Control Virtqueue / RSS Context} + +The driver MUST have negotiated the VIRTIO_NET_F_RSS_CONTEXT featurewhen issuing the
VIRTNET_RSS_CTX_CTRLclass commands.device-types/net/description.tex +2
-0+ +The driver MUST set \field{rss_ctx_id} to between 1 and\field{max_rss_contexts} inclusive.
device-types/net/description.tex +2
-0+ +The driver MUST NOT send the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SETcommand when the device has responded to the
VIRTNET_RSS_CTX_CTRL_ADDcommand withVIRTIO_NET_OK.
+
\paragraph{Offloads State Configuration}\label{sec:Device Types / Network
Device / Device Operation / Control Virtqueue / Offloads State Configuration}If the
VIRTIO_NET_F_CTRL_GUEST_OFFLOADSfeature is negotiated, the driver
can diff --git a/device-types/net/driver-conformance.tex b/device- types/net/driver-conformance.tex
index 9d853d9..22ff5c3 100644device-types/net/driver-conformance.tex +0
-0@@ -15,4 +15,5 @@ \item \ref{drivernormative:Device Types / Network Device / Device Operation /Control Virtqueue / Receive-side scaling (RSS) } \item \ref{drivernormative:Device Types / Network Device / Device Operation /
Quoted 8 lines
Control Virtqueue / Notifications Coalescing} \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Inner Header Hash}
+\item \ref{drivernormative:Device Types / Network Device / Device +Operation / Control Virtqueue / RSS Context}
\end{itemize}
--
2.19.1.6.gb485710b
This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/
Quoted 83 lines · Parav Pandit
Quoted 83 lines
From: Heng Qi <[email protected]>
Sent: Tuesday, August 15, 2023 6:07 PMCommit
84a1d9c48200("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") adds support for RSS context as a destination for receive flow filters (pls see https://lists.oasis-open. org/archives/virtio- comment/202308/msg00194.html).An RSS context consists of configurable parameters specified by receive-side scaling.
Usecase:
When users want some data flows to be steered to specific multiple rxqs, they can set receive flow filter rules for these data flows to an RSS context with desired rxqs.How to set/configure an RSS context:
Assuming no RSS context has been created before.
1. ethtool -X eth0 context new start 5 equal 8This command creates an RSS context with an id=1 for eth0, and fills in the indirection table with rxq indexes 5-8 circularly. The hash key and hash types reuse the default RSS configuration.
Then, we can use 'ethtool -x eth0 context 1' to query the above configuration.
2. ethtool -X eth0 context new start 6 equal 7 \ hkey 8f:bf:dd:11:23:58:d2:8a:00:31:d0:32:a3:b5:1f:\ 1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4d:c8:f3This command creates an RSS context with an id=2 for eth0, and fills in the indirection table with rxq indexes 6-7 circularly. The hash key is 8f:bf:dd:11:23:58:d2:8a:00:31:d0\
:32:a3:b5:1f:1f:e4:d1:fe:47:7f:64:42:fd:d0:61:16:b8:b0:f9:71:e8:2d:36:7f:18:dd:4 d:c8:f3.
Hash types reuse the default RSS configuration.3. ethtool -N eth0 rx-flow-hash tcp4 sdfn context 1
This command specifies the hash types for the RSS context whose id=1 on eth0. Now this RSS context only has the hash key to reuse the default RSS configuration.
4. ethtool -N eth0 flow-type udp4 src-ip 1.1.1.1 context 1
This command configures a receive flow filter rule for eth0, and the data flow matching this rule will continue to select the final rxq according to the RSS context configuration with id=1.
Signed-off-by Heng Qi <[email protected]>--- device-types/net/description.tex | 70 +++++++++++++++++++++++++ device-types/net/driver-conformance.tex | 1 + 2 files changed, 71 insertions(+)device-types/net/description.tex +0
-0@@ -88,6 +88,8 @@ \subsection{Feature bits}\label{sec:Device Types /Network Device / Feature bits \item[VIRTIO_NET_F_CTRL_MAC_ADDR(23)] Set MAC address through control
channel.+\item[VIRTIO_NET_F_RSS_CONTEXT(50)] Device supports multiple RSS contexts.
+
\item[VIRTIO_NET_F_HASH_TUNNEL(51)] Device supports inner header hash
for encapsulated packets.\item[VIRTIO_NET_F_VQ_NOTF_COAL(52)] Device supports virtqueue
notification coalescing.device-types/net/description.tex +0
-0@@ -150,6 +152,7 @@ \subsubsection{Feature bitrequirements}\label{sec:Device Types / Network Device \item[VIRTIO_NET_F_RSS] Requires
VIRTIO_NET_F_CTRL_VQ.
\item[VIRTIO_NET_F_VQ_NOTF_COAL] RequiresVIRTIO_NET_F_CTRL_VQ. \item[VIRTIO_NET_F_HASH_TUNNEL] RequiresVIRTIO_NET_F_CTRL_VQalong
withVIRTIO_NET_F_RSSorVIRTIO_NET_F_HASH_REPORT. +\item[VIRTIO_NET_F_RSS_CONTEXT] RequiresVIRTIO_NET_F_CTRL_VQandVIRTIO_NET_F_RSS.
\end{description}
Quoted 12 lines
device-types/net/description.tex \subsection{Device configuration layout}\label{sec:Device Types / Network Device · line 186
Quoted 9 lines
\subsubsection{Legacy Interface: Feature bits}\label{sec:Device Types /
Network Device / Feature bits / Legacy Interface: Feature bits} @@ -179,6 +182,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Devicele16 rss_max_indirection_table_length; le32 supported_hash_types; le32 supported_tunnel_types;device-types/net/description.tex +2
-0+ le16 max_rss_contexts; + le16 reserved;As we discussed in past, virtio net device do not need to keep expanding (a) one time read fields and (b) which are used very late in driver life or sometime never read. They are supposed to be queried over dma interface, which is cvq for net.
Lets please revise this as base line
I see. Will modify this.
Quoted 49 lines
Quoted 49 lines
}; \end{lstlisting}device-types/net/description.tex +0
-0@@ -235,6 +240,12 @@ \subsection{Device configurationlayout}\label{sec:Device Types / Network Device Encapsulation types are defined in \ref{sec:Device Types / Network Device / Device Operation / Processing of Incoming Packets / Hash calculation for incoming packets / Encapsulation types supported/enabled for inner header hash}.
+Field \field{max_rss_contexts} only exists if
VIRTIO_NET_F_RSS_CONTEXTis set.device-types/net/description.tex +2
-0+This field specifies the maximum number of RSS contexts \ref{sec:Device +Types / Network Device / Device Operation / Control Virtqueue / RSS Context}supported by the device.
device-types/net/description.tex +3
-0+ +Field \field{reserved} contains zeroes and is reserved. + \devicenormative{\subsubsection}{Device configuration layout}{Device Types /Network Device / Device configuration layout}
The device MUST set \field{max_virtqueue_pairs} to between 1 and
0x8000
inclusive, @@ -285,6 +296,8 @@ \subsection{Device configuration layout}\label{sec:Device Types / Network Device The device SHOULD NOT offerVIRTIO_NET_F_CTRL_RX_EXTRAif it does not offerVIRTIO_NET_F_CTRL_VQ.+The device MUST set \field{max_rss_contexts} to at least 1 if it offers
VIRTIO_NET_F_RSS_CONTEXT.
+
\drivernormative{\subsubsection}{Device configuration layout}{Device Types /
Network Device / Device configuration layout}The driver MUST NOT write to any of the device configuration fields.
device-types/net/description.tex +0
-0@@ -1606,6 +1619,63 @@ \subsubsection{Control Virtqueue}\label{sec:DeviceTypes / Network Device / Devi \item If the destination receive queue is being reset (See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}), the device MUST drop the packet.
\end{itemize}+\paragraph{RSS Context}\label{sec:Device Types / Network Device /
device-types/net/description.tex +4
-0+Device Operation / Control Virtqueue / RSS Context} + +An RSS context consists of configurable parameters specified by +\ref{sec:Device Types / Network Device / Device Operation / ControlVirtqueue / Receive-side scaling (RSS)}.
device-types/net/description.tex +2
-0+ +The RSS configuration supported by the VIRTIO_NET_F_RSS feature isimplicitly considered the default RSS context.
+
Quoted 8 lines
device-types/net/description.tex \subsubsection{Control Virtqueue}\label{sec:Device Types / Network Device / Devi · line 1634
Quoted 7 lines
device-types/net/description.tex +2
-0+The device offers the feature VIRTIO_NET_F_RSS_CONTEXT if it supports +one or more RSS contexts (excluding the default RSS context supported by
VIRTIO_NET_F_RSS) and configurable parameters.device-types/net/description.tex +4
-0+ +\begin{lstlisting} +struct virtnet_rss_ctx_add_modify { + u8 rss_ctx_id;Please double check if this can be le16, even though current may be limited to 256.
Good catch! Here is le16. Aligned with field max_rss_contexts.
Thanks!
Quoted 72 lines
Quoted 72 lines
device-types/net/description.tex +18
-0+ u8 padding[3]; + struct virtio_net_rss_config rss; +}; + +struct virtnet_rss_ctx_del { + u8 rss_ctx_id; +}; + +#define VIRTNET_RSS_CTX_CTRL 8 + #define VIRTNET_RSS_CTX_CTRL_ADD 0 + #define VIRTNET_RSS_CTX_CTRL_MOD 1 + #define VIRTNET_RSS_CTX_CTRL_DEL 2 +\end{lstlisting} + +RSS context parameters: +\begin{itemize} +\item \field{rss_ctx_id}: ID of the specific RSS context. +\item \field{rss}: Configure the specific RSS context whose id is\field{rss_ctx_id}.
+\end{itemize}device-types/net/description.tex +5
-0+ +\field{padding} is reserved and it is ignored by the device. + +If the feature VIRTIO_NET_F_RSS_CONTEXT has been negotiated, the driver +can send the following VIRTNET_RSS_CTX_CTRL class commands to configurea specific RSS context:
+\begin{enumerate}
+\itemVIRTNET_RSS_CTX_CTRL_ADD: use the structurevirtnet_rss_ctx_add_modifyto
+ add an RSS context configured as \field{rss} and id as \field{rss_ctx_id} for
the device.
+\itemVIRTNET_RSS_CTX_CTRL_MOD: use the structurevirtnet_rss_ctx_add_modifyto
+ configure parameters of the RSS context whose id is \field{rss_ctx_id} as
\field{rss} for the device.
+\itemVIRTNET_RSS_CTX_CTRL_DEL: use the structurevirtnet_rss_ctx_delto deletedevice-types/net/description.tex +4
-0+ the RSS context whose id is \field{rss_ctx_id} for the device. +\end{enumerate} + +For VIRTNET_RSS_CTX_CTRL_ADD and VIRTNET_RSS_CTX_CTRL_MODcommands, the structure
virtnet_rss_ctx_add_modifyis read-only for the device.
+For theVIRTNET_RSS_CTX_CTRL_DELcommand, the structurevirtnet_rss_ctx_delis read-only for the device.device-types/net/description.tex +5
-0+ +\drivernormative{\subparagraph}{RSS Context}{Device Types / Network +Device / Device Operation / Control Virtqueue / RSS Context} + +The driver MUST have negotiated the VIRTIO_NET_F_RSS_CONTEXT featurewhen issuing the
VIRTNET_RSS_CTX_CTRLclass commands.device-types/net/description.tex +2
-0+ +The driver MUST set \field{rss_ctx_id} to between 1 and\field{max_rss_contexts} inclusive.
device-types/net/description.tex +2
-0+ +The driver MUST NOT send the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SETcommand when the device has responded to the
VIRTNET_RSS_CTX_CTRL_ADDcommand withVIRTIO_NET_OK.
+
\paragraph{Offloads State Configuration}\label{sec:Device Types / Network
Device / Device Operation / Control Virtqueue / Offloads State Configuration}If the
VIRTIO_NET_F_CTRL_GUEST_OFFLOADSfeature is negotiated, the driver
can diff --git a/device-types/net/driver-conformance.tex b/device- types/net/driver-conformance.tex
index 9d853d9..22ff5c3 100644device-types/net/driver-conformance.tex +0
-0@@ -15,4 +15,5 @@ \item \ref{drivernormative:Device Types / Network Device / Device Operation /Control Virtqueue / Receive-side scaling (RSS) } \item \ref{drivernormative:Device Types / Network Device / Device Operation /
Quoted 8 lines
Quoted 8 lines
Control Virtqueue / Notifications Coalescing} \item \ref{drivernormative:Device Types / Network Device / Device Operation / Control Virtqueue / Inner Header Hash}
+\item \ref{drivernormative:Device Types / Network Device / Device +Operation / Control Virtqueue / RSS Context}
\end{itemize}
--
2.19.1.6.gb485710b
This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC.
In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting.
Subscribe: [email protected]
Unsubscribe: [email protected]
List help: [email protected]
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/