clk: imx: imx6sx: Allow a different LCDIF1 clock parent
Subsystems (3)
Fabio Estevam
reviewerPATCH v4 1/1 clk: imx: imx6sx: Allow a different LCDIF1 clock parent
From: Fabio Estevam <[email protected]>
It is not a good idea to hardcode the LCDIF1 parent inside the clock driver because some users may want to use a different clock parent for LCDIF1. One of the reasons could be related to EMI tests.
Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described via devicetree.
Old dtb's that do not describe the LCDIF1 parent via devicetree will use the same PLL5 clock as parent to keep the original behavior.
---
Changes since v3:
- Check for the presence of 'assigned-clock-parents'. (Stephen)
drivers/clk/imx/clk-imx6sx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
drivers/clk/imx/clk-imx6sx.c +11 -3
@@ -121,6 +121,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) {struct device_node *np;void __iomem *base; +bool lcdif1_assigned_clk; clk_hw_data =kzalloc (struct_size (clk_hw_data, hws,IMX6SX_CLK_CLK_END ),GFP_KERNEL );
@@ -498,9 +499,16 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)clk_set_parent (hws[IMX6SX_CLK_EIM_SLOW_SEL ]->clk, hws[IMX6SX_CLK_PLL2_PFD2 ]->clk);clk_set_rate (hws[IMX6SX_CLK_EIM_SLOW ]->clk,132000000 ); -/* set parent clock for LCDIF1 pixel clock */ -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + np =of_find_node_by_path ("/soc/bus@2200000/spba-bus@2240000/lcdif@2220000" ); + lcdif1_assigned_clk =of_find_property (np,"assigned-clock-parents" ,NULL ); + +/* Set parent clock for LCDIF1 pixel clock if not done via devicetree */ +if (!lcdif1_assigned_clk) { +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, + hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, + hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + }/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ if (clk_set_parent (hws[IMX6SX_CLK_LVDS1_SEL ]->clk, hws[IMX6SX_CLK_PCIE_REF_125M ]->clk))
Signature · 1 line
2.34.1
Fabio Estevam
reviewerHi Abel,
Gentle ping.
Quoted 56 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
It is not a good idea to hardcode the LCDIF1 parent inside the clock driver because some users may want to use a different clock parent for LCDIF1. One of the reasons could be related to EMI tests.
Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described via devicetree.
Old dtb's that do not describe the LCDIF1 parent via devicetree will use the same PLL5 clock as parent to keep the original behavior.
Signed-off-by Fabio Estevam <[email protected]>---
Changes since v3:
- Check for the presence of 'assigned-clock-parents'. (Stephen)drivers/clk/imx/clk-imx6sx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)drivers/clk/imx/clk-imx6sx.c +11
-4@@ -121,6 +121,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) {struct device_node *np;void __iomem *base; +bool lcdif1_assigned_clk; clk_hw_data =kzalloc (struct_size (clk_hw_data, hws,IMX6SX_CLK_CLK_END ),GFP_KERNEL );@@ -498,9 +499,16 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)clk_set_parent (hws[IMX6SX_CLK_EIM_SLOW_SEL ]->clk, hws[IMX6SX_CLK_PLL2_PFD2 ]->clk);clk_set_rate (hws[IMX6SX_CLK_EIM_SLOW ]->clk,132000000 ); -/* set parent clock for LCDIF1 pixel clock */ -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + np =of_find_node_by_path ("/soc/bus@2200000/spba-bus@2240000/lcdif@2220000" ); + lcdif1_assigned_clk =of_find_property (np,"assigned-clock-parents" ,NULL ); + +/* Set parent clock for LCDIF1 pixel clock if not done via devicetree */ +if (!lcdif1_assigned_clk) { +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, + hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, + hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + }/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ if (clk_set_parent (hws[IMX6SX_CLK_LVDS1_SEL ]->clk, hws[IMX6SX_CLK_PCIE_REF_125M ]->clk)) --2.34.1
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
It is not a good idea to hardcode the LCDIF1 parent inside the clock driver because some users may want to use a different clock parent for LCDIF1. One of the reasons could be related to EMI tests.
Quoted 7 lines
Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described via devicetree.
Old dtb's that do not describe the LCDIF1 parent via devicetree will use the same PLL5 clock as parent to keep the original behavior.
Signed-off-by Fabio Estevam <[email protected]>
Sorry, this hasn't made it to my clk-imx inbox due to linux-imx ML not being CC'ed. My clk-imx inbox filters on my kernel.org email, the linux-clk ML and the linux-imx ML.
Please use get_maintainer.pl script since that will also point to Peng Fan who is a reviewer.
Patch looks good to me.
Quoted 43 lines
---
Changes since v3:
- Check for the presence of 'assigned-clock-parents'. (Stephen)drivers/clk/imx/clk-imx6sx.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)drivers/clk/imx/clk-imx6sx.c +11
-3@@ -121,6 +121,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) {struct device_node *np;void __iomem *base; +bool lcdif1_assigned_clk; clk_hw_data =kzalloc (struct_size (clk_hw_data, hws,IMX6SX_CLK_CLK_END ),GFP_KERNEL );@@ -498,9 +499,16 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)clk_set_parent (hws[IMX6SX_CLK_EIM_SLOW_SEL ]->clk, hws[IMX6SX_CLK_PLL2_PFD2 ]->clk);clk_set_rate (hws[IMX6SX_CLK_EIM_SLOW ]->clk,132000000 ); -/* set parent clock for LCDIF1 pixel clock */ -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); -clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + np =of_find_node_by_path ("/soc/bus@2200000/spba-bus@2240000/lcdif@2220000" ); + lcdif1_assigned_clk =of_find_property (np,"assigned-clock-parents" ,NULL ); + +/* Set parent clock for LCDIF1 pixel clock if not done via devicetree */ +if (!lcdif1_assigned_clk) { +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_PRE_SEL ]->clk, + hws[IMX6SX_CLK_PLL5_VIDEO_DIV ]->clk); +clk_set_parent (hws[IMX6SX_CLK_LCDIF1_SEL ]->clk, + hws[IMX6SX_CLK_LCDIF1_PODF ]->clk); + }/* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ if (clk_set_parent (hws[IMX6SX_CLK_LVDS1_SEL ]->clk, hws[IMX6SX_CLK_PCIE_REF_125M ]->clk))Signature · 1 line
2.34.1
Abel Vesa
AppliedQuoted 8 lines · Fabio Estevam
It is not a good idea to hardcode the LCDIF1 parent inside the clock driver because some users may want to use a different clock parent for LCDIF1. One of the reasons could be related to EMI tests.
Remove the harcoded LCDIF1 parent when the LCDIF1 parent is described via devicetree.
[...]
Applied, thanks!
[1/1] clk: imx: imx6sx: Allow a different LCDIF1 clock parent
commit: 0a22b3a6f446223aff5bcdcc06003ef6e412bfd8
Best regards,
Signature · 1 line
Abel Vesa <[email protected]>