doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line
Fabio Estevam
reviewerPATCH 1/1 doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line
From: Fabio Estevam <[email protected]>
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export.
The ATF address is now passed via binman.
Remove the unneeded export ATF_LOAD_ADDR line.
Signed-off-by Fabio Estevam <[email protected]>
--- doc/imx/habv4/csf_examples/mx8m/csf.sh | 1 - 1 file changed, 1 deletion(-)
doc/imx/habv4/csf_examples/mx8m/csf.sh +0 -1
@@ -11,7 +11,6 @@ # 1) Build U-Boot (e.g. for i.MX8MM) # -# export ATF_LOAD_ADDR=0x920000 # cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin . # cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* . # make -j imx8mm_board_defconfig
Signature · 1 line
2.34.1
Quoted 11 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Originally, exporting the
ATF_LOAD_ADDRwas required, but since binman has been used to generate the flash.bin, it is no longer needed to do such manual export.The ATF address is now passed via binman.
Remove the unneeded export
ATF_LOAD_ADDRline.Signed-off-by Fabio Estevam <[email protected]>
Acked-by Peng Fan <[email protected]>