Skip to contentSkip to conversation

ALSA: hda: cs35l41: Support systems with missing _DSD properties

PATCH In review Stefan Binding 3 participants 3 messages Aug 15, 2023 – Aug 17, 2023 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hda: cs35l41: Support systems with missing _DSD properties

Some systems using CS35L41 with HDA were released without some required _DSD properties in ACPI. To support these special cases, add an api to configure the correct properties for systems with this issue.

This initial commit moves the no _DSD support for Lenovo Legion Laptops (CLSA0100, CLSA0101) into a new framework which can be extended to support additional laptops in the future.

---
 sound/pci/hda/Makefile               |  2 +-
 sound/pci/hda/cs35l41_hda.c          | 65 ++++++-------------------
 sound/pci/hda/cs35l41_hda.h          |  1 +
 sound/pci/hda/cs35l41_hda_property.c | 73 ++++++++++++++++++++++++++++
 sound/pci/hda/cs35l41_hda_property.h | 18 +++++++
 5 files changed, 108 insertions(+), 51 deletions(-)
 create mode 100644 sound/pci/hda/cs35l41_hda_property.c
 create mode 100644 sound/pci/hda/cs35l41_hda_property.h
sound/pci/hda/Makefile +1 -1
index c6e6509e7b8e..5506255be895 100644
@@ -28,7 +28,7 @@ snd-hda-codec-via-objs :=	patch_via.o
 snd-hda-codec-hdmi-objs :=	patch_hdmi.o hda_eld.o
 
 # side codecs
-snd-hda-scodec-cs35l41-objs :=		cs35l41_hda.o
+snd-hda-scodec-cs35l41-objs :=		cs35l41_hda.o cs35l41_hda_property.o
 snd-hda-scodec-cs35l41-i2c-objs :=	cs35l41_hda_i2c.o
 snd-hda-scodec-cs35l41-spi-objs :=	cs35l41_hda_spi.o
 snd-hda-scodec-cs35l56-objs :=		cs35l56_hda.o
sound/pci/hda/cs35l41_hda.c +15 -50

97 lines not on this page · raw message

sound/pci/hda/cs35l41_hda.h +1 -0
index bdb35f3be68a..b93bf762976e 100644
@@ -83,5 +83,6 @@ extern const struct dev_pm_ops cs35l41_hda_pm_ops;
 int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int irq,
 		      struct regmap *regmap);
 void cs35l41_hda_remove(struct device *dev);
+int cs35l41_get_speaker_id(struct device *dev, int amp_index, int num_amps, int fixed_gpio_id);
 
 #endif /*__CS35L41_HDA_H__*/
sound/pci/hda/cs35l41_hda_property.c new file +73 -0

73 lines not on this page · raw message

sound/pci/hda/cs35l41_hda_property.h new file +18 -0
new file mode 100644
index 000000000000..fd834042e2fd
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS35L41 ALSA HDA Property driver
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: Stefan Binding <[email protected]>
+ */
+
+#ifndef CS35L41_HDA_PROP_H
+#define CS35L41_HDA_PROP_H
+
+#include <linux/device.h>
+#include "cs35l41_hda.h"
+
+int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+			       const char *hid);
+#endif /* CS35L41_HDA_PROP_H */
Signature · 1 line
2.34.1
#1 lore raw
Quoted 11 lines · Stefan Binding

Some systems using CS35L41 with HDA were released without some required _DSD properties in ACPI. To support these special cases, add an api to configure the correct properties for systems with this issue.

This initial commit moves the no _DSD support for Lenovo Legion Laptops (CLSA0100, CLSA0101) into a new framework which can be extended to support additional laptops in the future.

OK, we need to give up and accept the bitter reality :) Now applied. Thanks.

Takashi

#2 lore raw
In reply to Stefan Binding
Quoted 288 lines · Stefan Binding

Some systems using CS35L41 with HDA were released without some required _DSD properties in ACPI. To support these special cases, add an api to configure the correct properties for systems with this issue.

This initial commit moves the no _DSD support for Lenovo Legion Laptops (CLSA0100, CLSA0101) into a new framework which can be extended to support additional laptops in the future.

---
 sound/pci/hda/Makefile               |  2 +- sound/pci/hda/cs35l41_hda.c          | 65 ++++++------------------- sound/pci/hda/cs35l41_hda.h          |  1 + sound/pci/hda/cs35l41_hda_property.c | 73
++++++++++++++++++++++++++++
 sound/pci/hda/cs35l41_hda_property.h | 18 +++++++

 5 files changed, 108 insertions(+), 51 deletions(-)

 create mode 100644 sound/pci/hda/cs35l41_hda_property.c create mode 100644 sound/pci/hda/cs35l41_hda_property.h

sound/pci/hda/Makefile +0 -0
index c6e6509e7b8e..5506255be895 100644
@@ -28,7 +28,7 @@ snd-hda-codec-via-objs :=     patch_via.o

 snd-hda-codec-hdmi-objs :=     patch_hdmi.o hda_eld.o

 # side codecs
sound/pci/hda/Makefile +1 -1
-snd-hda-scodec-cs35l41-objs :=         cs35l41_hda.o
+snd-hda-scodec-cs35l41-objs :=         cs35l41_hda.o

cs35l41_hda_property.o snd-hda-scodec-cs35l41-i2c-objs :=     cs35l41_hda_i2c.o snd-hda-scodec-cs35l41-spi-objs :=     cs35l41_hda_spi.o snd-hda-scodec-cs35l56-objs :=         cs35l56_hda.o

sound/pci/hda/cs35l41_hda.c +1 -0
index 825e551be9bb..f9b77353c266 100644
@@ -19,6 +19,7 @@
  #include "hda_component.h"
  #include "cs35l41_hda.h"
  #include "hda_cs_dsp_ctl.h"
+#include "cs35l41_hda_property.h"


 #define CS35L41_FIRMWARE_ROOT "cirrus/"
 #define CS35L41_PART "cs35l41"

sound/pci/hda/cs35l41_hda.c +0 -0
@@ -1315,8 +1316,7 @@ static int cs35l41_hda_apply_properties(struct
 cs35l41_hda *cs35l41)
         return cs35l41_hda_channel_map(cs35l41->dev, 0, NULL, 1,
 &hw_cfg->spk_pos);
  }

sound/pci/hda/cs35l41_hda.c +1 -2
-static int cs35l41_get_speaker_id(struct device *dev, int amp_index,
-                                 int num_amps, int fixed_gpio_id)
+int cs35l41_get_speaker_id(struct device *dev, int amp_index, int

num_amps, int fixed_gpio_id)
 {
        struct gpio_desc *speaker_id_desc;
        int speaker_id = -ENODEV;

sound/pci/hda/cs35l41_hda.c +0 -0
@@ -1370,49 +1370,6 @@ static int cs35l41_get_speaker_id(struct
 device *dev, int amp_index,
         return speaker_id;
  }


-/*
- * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
- * And devices created by serial-multi-instantiate don't have their device struct
- * pointing to the correct fwnode, so acpi_dev must be used here.
- * And devm functions expect that the device requesting the resource has the correct
- * fwnode.
- */
-static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
-                              const char *hid)

sound/pci/hda/cs35l41_hda.c +0 -7
-{
-       struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
-
-       /* check I2C address to assign the index */
-       cs35l41->index = id == 0x40 ? 0 : 1;
-       cs35l41->channel_index = 0;
-       cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0,

GPIOD_OUT_HIGH);
-       cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
-       hw_cfg->spk_pos = cs35l41->index;
-       hw_cfg->gpio2.func = CS35L41_INTERRUPT;
-       hw_cfg->gpio2.valid = true;
-       hw_cfg->valid = true;
-
-       if (strncmp(hid, "CLSA0100", 8) == 0) {
-               hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH; -       } else if (strncmp(hid, "CLSA0101", 8) == 0) {
-               hw_cfg->bst_type = CS35L41_EXT_BOOST;
-               hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH; -               hw_cfg->gpio1.valid = true;
-       } else {
-               /*
-                * Note: CLSA010(0/1) are special cases which use a slightly different design.
-                * All other HIDs e.g. CSC3551 require valid ACPI _DSD properties to be supported.
-                */
-               dev_err(cs35l41->dev, "Error: ACPI _DSD Properties are missing for HID %s.\n", hid);
-               hw_cfg->valid = false;
-               hw_cfg->gpio1.valid = false;
-               hw_cfg->gpio2.valid = false;
-               return -EINVAL;
-       }

sound/pci/hda/cs35l41_hda.c +0 -4
-
-       return 0;
-}
-

 static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, int id)
 {
        struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;

sound/pci/hda/cs35l41_hda.c +0 -0
@@ -1438,12 +1395,17 @@ static int cs35l41_hda_read_acpi(struct

cs35l41_hda *cs35l41, const char *hid, i
                sub = NULL;
        cs35l41->acpi_subsystem_id = sub;

+       ret = cs35l41_add_dsd_properties(cs35l41, physdev, id, hid); +       if (!ret) {
+               dev_info(cs35l41->dev, "Using extra _DSD properties, bypassing _DSD in ACPI\n");
+               goto put_physdev;
+       }
+
        property = "cirrus,dev-index";
        ret = device_property_count_u32(physdev, property); -       if (ret <= 0) {
-               ret = cs35l41_no_acpi_dsd(cs35l41, physdev, id, hid); -               goto err_put_physdev;
-       }
+       if (ret <= 0)
+               goto err;
+
        if (ret > ARRAY_SIZE(values)) {
                ret = -EINVAL;
                goto err;

sound/pci/hda/cs35l41_hda.c +0 -0
@@ -1533,7 +1495,10 @@ static int cs35l41_hda_read_acpi(struct

cs35l41_hda *cs35l41, const char *hid, i

 err:
        dev_err(cs35l41->dev, "Failed property %s: %d\n", property, ret);

sound/pci/hda/cs35l41_hda.c +4 -1
-err_put_physdev:
+       hw_cfg->valid = false;
+       hw_cfg->gpio1.valid = false;
+       hw_cfg->gpio2.valid = false;
+put_physdev:

        put_device(physdev);

        return ret;

sound/pci/hda/cs35l41_hda.h +1 -0
index bdb35f3be68a..b93bf762976e 100644
@@ -83,5 +83,6 @@ extern const struct dev_pm_ops cs35l41_hda_pm_ops;
  int cs35l41_hda_probe(struct device *dev, const char *device_name,
 int id, int irq,
                       struct regmap *regmap);
  void cs35l41_hda_remove(struct device *dev);
+int cs35l41_get_speaker_id(struct device *dev, int amp_index, int
 num_amps, int fixed_gpio_id);


 #endif /*__CS35L41_HDA_H__*/

sound/pci/hda/cs35l41_hda_property.c new file +14 -0
new file mode 100644
index 000000000000..673f23257a09
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// CS35L41 ALSA HDA Property driver
+//
+// Copyright 2023 Cirrus Logic, Inc.
+//
+// Author: Stefan Binding <[email protected]>
+
+#include <linux/gpio/consumer.h>
+#include <linux/string.h>
+#include "cs35l41_hda_property.h"
+
+/*
+ * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label

reset won't work.
+ * And devices created by serial-multi-instantiate don't have their device struct
+ * pointing to the correct fwnode, so acpi_dev must be used here.
+ * And devm functions expect that the device requesting the resource has the correct
+ * fwnode.
+ */
+static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+                                const char *hid)

sound/pci/hda/cs35l41_hda_property.c new file +7 -0
+{
+       struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
+
+       /* check I2C address to assign the index */
+       cs35l41->index = id == 0x40 ? 0 : 1;
+       cs35l41->channel_index = 0;
+       cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0,

GPIOD_OUT_HIGH);
+       cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
+       hw_cfg->spk_pos = cs35l41->index;
+       hw_cfg->gpio2.func = CS35L41_INTERRUPT;
+       hw_cfg->gpio2.valid = true;
+       hw_cfg->valid = true;

sound/pci/hda/cs35l41_hda_property.c new file +16 -0
+
+       if (strcmp(hid, "CLSA0100") == 0) {
+               hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
+       } else if (strcmp(hid, "CLSA0101") == 0) {
+               hw_cfg->bst_type = CS35L41_EXT_BOOST;
+               hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
+               hw_cfg->gpio1.valid = true;
+       }
+
+       return 0;
+}
+
+struct cs35l41_prop_model {
+       const char *hid;
+       const char *ssid;
+       int (*add_prop)(struct cs35l41_hda *cs35l41, struct device

*physdev, int id,
+                       const char *hid);

sound/pci/hda/cs35l41_hda_property.c new file +9 -0
+};
+
+const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
+       { "CLSA0100", NULL, lenovo_legion_no_acpi },
+       { "CLSA0101", NULL, lenovo_legion_no_acpi },
+       {}
+};
+
+int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct

device *physdev, int id,
+                              const char *hid)

sound/pci/hda/cs35l41_hda_property.c new file +4 -0
+{
+       const struct cs35l41_prop_model *model;
+
+       for (model = cs35l41_prop_model_table; model->hid > 0;

model++) {
+               if (!strcmp(model->hid, hid) && +                   (!model->ssid ||
+                    (cs35l41->acpi_subsystem_id && +                     !strcmp(model->ssid, cs35l41-

Quoted 1 line

acpi_subsystem_id))))

+                       return model->add_prop(cs35l41, physdev, id, hid);
+       }

sound/pci/hda/cs35l41_hda_property.c new file +3 -0
+
+       return -ENOENT;
+}
sound/pci/hda/cs35l41_hda_property.h new file +16 -0
new file mode 100644
index 000000000000..fd834042e2fd
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS35L41 ALSA HDA Property driver
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: Stefan Binding <[email protected]>
+ */
+
+#ifndef CS35L41_HDA_PROP_H
+#define CS35L41_HDA_PROP_H
+
+#include <linux/device.h>
+#include "cs35l41_hda.h"
+
+int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct
Quoted 3 lines

device *physdev, int id,
+                              const char *hid);
+#endif /* CS35L41_HDA_PROP_H */

Hi Stefan,

It's great to see progress here. I've had only a brief look and I haven't applied the patch as of yet since I have only SPI connected devices, so I must ask - are you planning any kind of extra support for the SPI connected devices?

My understanding of these SPI devs are that they are still missing the "cs-gpios" block in the ACPI and that they likely won't wok without it even with this patch.

Cheers,
Luke.