regulator: aw37503: add regulator driver for Awinic AW37503
Subsystems (2)
v4 cover regulator: aw37503: add regulator driver for Awinic AW37503
From: Alec Li <[email protected]>
Add regulator driver for the device Awinic AW37503 which is single inductor - dual output power supply device. AW37503 device is designed to support general positive/negative driven applications like TFT display panels.
v3->v4: Correct yamllint warnings/errors
Alec Li (2):
regulator: aw37503: add regulator driver for Awinic AW37503
regulator: dt-bindings: Add Awinic AW37503
.../bindings/regulator/awinic,aw37503.yaml | 80 ++++++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/aw37503-regulator.c | 240 ++++++++++++++++++ 4 files changed, 329 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml create mode 100644 drivers/regulator/aw37503-regulator.c
base-commit: 4853c74bd7ab7fdb83f319bd9ace8a08c031e9b6
Signature · 1 line
2.41.0
PATCH v4 1/2 regulator: aw37503: add regulator driver for Awinic AW37503
From: Alec Li <[email protected]>
Add regulator driver for the device Awinic AW37503 which is single inductor - dual output power supply device. AW37503 device is designed to support general positive/negative driven applications like TFT display panels.
AW37503 regulator driver supports to enable/disable and set voltage on its output.
--- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/aw37503-regulator.c | 240 ++++++++++++++++++++++++++ 3 files changed, 249 insertions(+) create mode 100644 drivers/regulator/aw37503-regulator.c
drivers/regulator/Kconfig +8 -0
@@ -178,6 +178,14 @@ config REGULATOR_ATC260X ATC260x PMICs. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_AW37503 + tristate "AWINIC AW37503 Dual Output Power regulators" + depends on I2C && GPIOLIB + select REGMAP_I2C + help + This driver supports AW37503 single inductor - dual output + power supply specifically designed for display panels. + config REGULATOR_AXP20X tristate "X-POWERS AXP20X PMIC Regulators" depends on MFD_AXP20X
drivers/regulator/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o +obj-$(CONFIG_REGULATOR_AW37503) += aw37503-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o
drivers/regulator/aw37503-regulator.c new file +240 -0
240 lines not on this page · raw message
Signature · 1 line
2.41.0
PATCH v4 2/2 regulator: dt-bindings: Add Awinic AW37503
In reply to [email protected]From: Alec Li <[email protected]>
Add aw37503 regulator device-tree binding documentation.
--- .../bindings/regulator/awinic,aw37503.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +80 -0
@@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li <[email protected]> + +description: | + The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503 + + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Properties for single regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + enable-gpio: + maxItems: 1 + description: | + GPIO specifier to enable the GPIO control (on/off) for regulator. + + required: + - regulator-name + +required: + - compatible + - reg + - outp + - outn + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3e { + compatible = "awinic,aw37503"; + reg = <0x3e>; + + outp { + regulator-name = "outp"; + regulator-boot-on; + regulator-always-on; + enable-gpio = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + outn { + regulator-name = "outn"; + regulator-boot-on; + regulator-always-on; + enable-gpio = <&gpio 27 GPIO_ACTIVE_LOW>; + }; + }; + }; +...
Signature · 1 line
2.41.0
Re: [PATCH v4 2/2] regulator: dt-bindings: Add Awinic AW37503
Quoted 18 lines · On 16/08/2023 10:17, [email protected] wrote:
From: Alec Li <[email protected]>
Add aw37503 regulator device-tree binding documentation.
Signed-off-by Alec Li <[email protected]>--- .../bindings/regulator/awinic,aw37503.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yamlDocumentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +2
-0@@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml line 12
Quoted 10 lines
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +10
-0+--- +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW37503 Voltage Regulator + +maintainers: + - Alec Li <[email protected]> + +description: |
Do not need '|' unless you need to preserve formatting.
Quoted 8 lines
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +8
-0+ The AW37503 are dual voltage regulator, designed to support positive/negative + supply for driving TFT-LCD panels. It support software-configurable output + switching and monitoring. The output voltages can be programmed via an I2C + compatible interface. + +properties: + compatible: + const: awinic,aw37503
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml line 30
Quoted 10 lines
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +10
-0+ + reg: + maxItems: 1 + +patternProperties: + "^out[pn]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: |
Do not need '|' unless you need to preserve formatting.
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml line 36
Quoted 6 lines
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +6
-0+ Properties for single regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true
Drop all three above. They are not needed, because you use unevaluatedProperties:false.
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml line 37
Quoted 1 line
Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml new file +1
-0+ enable-gpio:
I believe the name *everywhere* is enable-gpios.
Best regards,
Krzysztof