net: mdio: mdio-bitbang: Fix C45 read/write protocol
Subsystems (3)
PATCH 1/1 net: mdio: mdio-bitbang: Fix C45 read/write protocol
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit 002dd3de097c ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address command.
--- drivers/net/mdio/mdio-bitbang.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/mdio/mdio-bitbang.c +2 -2
@@ -186,7 +186,7 @@ int mdiobb_read_c45(struct mii_bus *bus, int phy, int devad, int reg)struct mdiobb_ctrl *ctrl = bus->priv;mdiobb_cmd_addr (ctrl, phy, devad, reg); -mdiobb_cmd (ctrl,MDIO_C45_READ , phy, reg); +mdiobb_cmd (ctrl,MDIO_C45_READ , phy, devad);return mdiobb_read_common (bus, phy); }
@@ -222,7 +222,7 @@ int mdiobb_write_c45(struct mii_bus *bus, int phy, int devad, int reg, u16 val)struct mdiobb_ctrl *ctrl = bus->priv;mdiobb_cmd_addr (ctrl, phy, devad, reg); -mdiobb_cmd (ctrl,MDIO_C45_WRITE , phy, reg); +mdiobb_cmd (ctrl,MDIO_C45_WRITE , phy, devad);return mdiobb_write_common (bus, val); }
Signature · 1 line
2.41.0
Quoted 10 lines · Serge Semin
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit
002dd3de097c("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address command.
I'm actually surprised we have not got more reports of me breaking MDIO with this patchset. I did test bit-banging, but only for C22.
Quoted 2 lines
Fixes 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")Signed-off-by Serge Semin <[email protected]>
Andrew
Quoted 13 lines · Andrew Lunn
Quoted 10 lines · Serge Semin
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit
002dd3de097c("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address command.
Quoted 2 lines
I'm actually surprised we have not got more reports of me breaking MDIO with this patchset. I did test bit-banging, but only for C22.
Yeah, I was also surprised not to find any fixes or reports for more than a half of year in the mailing list or in the commits log. I was sitting on 6.4-rc1 when the problem was discovered. Seeing the problem was easily reproducible I decided to get to the latest kernel before get to debugging it. It didn't help. The problem remained in 6.5-rc4 too.
Quoted 5 lines
Quoted 3 lines
Fixes 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")Signed-off-by Serge Semin <[email protected]>Reviewed-by Andrew Lunn <[email protected]>
Thanks.
-Serge(y)
Quoted 2 lines
Andrew
This patch was applied to netdev/net.git (main) by David S. Miller <[email protected]>:
Hello:
This patch was applied to netdev/net.git (main)
by David S. Miller <[email protected]>:
Quoted 11 lines · On Wed, 16 Aug 2023 21:06:52 +0300 you wrote:
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit
002dd3de097c("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address command.
Quoted 1 line
[...]
Here is the summary with links:
- [net] net: mdio: mdio-bitbang: Fix C45 read/write protocol
https://git.kernel.org/netdev/net/c/2572ce62415c
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html