arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
Subsystems (2)
PATCH RESEND v2 1/1 arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow
From: Hsin-Te Yuan <[email protected]>
The external output reset signal was originally disabled and sent from firmware. However, an unfixed bug in the firmware on tomato prevents the signal from being sent, causing the device to fail to boot. To fix this, enable external output reset signal to allow the device to reboot normally.
Signed-off-by Hsin-Te Yuan <[email protected]>
---
Changes in v2:
- Limit the effect only on tomato.
--- arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts | 4 ++++ arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts | 4 ++++ arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts | 4 ++++ 3 files changed, 12 insertions(+)
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts +4 -0
@@ -23,3 +23,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts +4 -0
@@ -43,3 +43,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts +4 -0
@@ -44,3 +44,7 @@ &sound { &ts_10 { status = "okay"; }; + +&watchdog { + /delete-property/ mediatek,disable-extrst; +};
---
base-commit: 5d0c230f1de8c7515b6567d9afba1f196fb4e2f4
change-id: 20230818-send-upstream-e91e615a893c
Best regards,
Signature · 1 line
Hsin-Te Yuan <[email protected]>