Skip to contentSkip to conversation

ARM: tegra: Changes for v2023.10-rc1

GIT PULL Thierry Reding 3 participants 11 messages Aug 18, 2023 – Aug 22, 2023

lore
Share & tools
lore
#0 lore raw

From: Thierry Reding <[email protected]>

Hi Tom,

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

 arch/arm/dts/Makefile                              |  13 +
 arch/arm/dts/tegra20-trimslice.dts                 |   8 +-
 arch/arm/dts/tegra30-asus-grouper-common.dtsi      | 157 +++++++
 arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts |  43 ++
 arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts |  36 ++
 arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts |  62 +++
 arch/arm/dts/tegra30-asus-p1801-t.dts              |  18 +
 arch/arm/dts/tegra30-asus-tf201.dts                |   9 +
 arch/arm/dts/tegra30-asus-tf300t.dts               |  18 +
 arch/arm/dts/tegra30-asus-tf300tg.dts              |   9 +
 arch/arm/dts/tegra30-asus-tf300tl.dts              |   9 +
 arch/arm/dts/tegra30-asus-tf600t.dts               |  89 ++++
 arch/arm/dts/tegra30-asus-tf700t.dts               |  13 +
 arch/arm/dts/tegra30-asus-transformer.dtsi         | 211 ++++++++++
 arch/arm/dts/tegra30-htc-endeavoru.dts             | 166 ++++++++
 arch/arm/dts/tegra30-lg-p880.dts                   |  40 ++
 arch/arm/dts/tegra30-lg-p895.dts                   |  50 +++
 arch/arm/dts/tegra30-lg-x3.dtsi                    | 180 +++++++++
 arch/arm/include/asm/arch-tegra/fuse.h             |   7 +
 arch/arm/mach-tegra/Makefile                       |   4 +
 arch/arm/mach-tegra/fuse.c                         | 151 +++++++
 arch/arm/mach-tegra/tegra30/Kconfig                |  20 +
 board/asus/grouper/Kconfig                         |  22 +
 board/asus/grouper/MAINTAINERS                     |  10 +
 board/asus/grouper/Makefile                        |  14 +
 board/asus/grouper/grouper-spl-max.c               |  45 +++
 board/asus/grouper/grouper-spl-ti.c                |  41 ++
 board/asus/grouper/grouper.c                       | 202 +++++++++
 board/asus/grouper/pinmux-config-grouper.h         | 362 +++++++++++++++++
 board/asus/transformer-t30/Kconfig                 |  23 ++
 board/asus/transformer-t30/MAINTAINERS             |  15 +
 board/asus/transformer-t30/Makefile                |  11 +
 .../transformer-t30/pinmux-config-transformer.h    | 365 +++++++++++++++++
 board/asus/transformer-t30/transformer-t30-spl.c   |  41 ++
 board/asus/transformer-t30/transformer-t30.c       | 201 +++++++++
 board/htc/endeavoru/Kconfig                        |  12 +
 board/htc/endeavoru/MAINTAINERS                    |   7 +
 board/htc/endeavoru/Makefile                       |  11 +
 board/htc/endeavoru/endeavoru-spl.c                |  47 +++
 board/htc/endeavoru/endeavoru.c                    | 116 ++++++
 board/htc/endeavoru/pinmux-config-endeavoru.h      | 362 +++++++++++++++++
 board/lg/x3-t30/Kconfig                            |  26 ++
 board/lg/x3-t30/MAINTAINERS                        |   9 +
 board/lg/x3-t30/Makefile                           |  11 +
 board/lg/x3-t30/pinmux-config-x3.h                 | 449 +++++++++++++++++++++
 board/lg/x3-t30/x3-t30-spl.c                       |  48 +++
 board/lg/x3-t30/x3-t30.c                           | 176 ++++++++
 configs/endeavoru_defconfig                        |  84 ++++
 configs/grouper_E1565.config                       |   2 +
 configs/grouper_PM269.config                       |   2 +
 configs/grouper_common_defconfig                   |  84 ++++
 configs/p1801-t.config                             |   2 +
 configs/p2371-2180_defconfig                       |   1 +
 configs/p2771-0000-000_defconfig                   |   1 +
 configs/p2771-0000-500_defconfig                   |   1 +
 configs/p3450-0000_defconfig                       |   1 +
 configs/p880.config                                |   4 +
 configs/p895.config                                |   4 +
 configs/tf201.config                               |   2 +
 configs/tf300t.config                              |   2 +
 configs/tf300tg.config                             |   2 +
 configs/tf300tl.config                             |   2 +
 configs/tf600t.config                              |   4 +
 configs/tf700t.config                              |   2 +
 configs/tilapia.config                             |   3 +
 configs/transformer_t30_defconfig                  |  85 ++++
 configs/x3_t30_defconfig                           |  88 ++++
 doc/board/asus/grouper_common.rst                  |  94 +++++
 doc/board/asus/index.rst                           |  10 +
 doc/board/asus/transformer_t30.rst                 | 116 ++++++
 doc/board/htc/endeavoru.rst                        |  89 ++++
 doc/board/htc/index.rst                            |   9 +
 doc/board/index.rst                                |   3 +
 doc/board/lg/index.rst                             |   9 +
 doc/board/lg/x3_t30.rst                            |  93 +++++
 include/configs/endeavoru.h                        |  65 +++
 include/configs/grouper.h                          |  61 +++
 include/configs/tegra-common-post.h                |  28 +-
 include/configs/transformer-common.h               |  94 +++++
 include/configs/transformer-t30.h                  |  23 ++
 include/configs/x3-t30.h                           |  77 ++++
 81 files changed, 5080 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/dts/tegra30-asus-grouper-common.dtsi
 create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-E1565.dts
 create mode 100644 arch/arm/dts/tegra30-asus-nexus7-grouper-PM269.dts
 create mode 100644 arch/arm/dts/tegra30-asus-nexus7-tilapia-E1565.dts
 create mode 100644 arch/arm/dts/tegra30-asus-p1801-t.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf201.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf300t.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf300tg.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf300tl.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf600t.dts
 create mode 100644 arch/arm/dts/tegra30-asus-tf700t.dts
 create mode 100644 arch/arm/dts/tegra30-asus-transformer.dtsi
 create mode 100644 arch/arm/dts/tegra30-htc-endeavoru.dts
 create mode 100644 arch/arm/dts/tegra30-lg-p880.dts
 create mode 100644 arch/arm/dts/tegra30-lg-p895.dts
 create mode 100644 arch/arm/dts/tegra30-lg-x3.dtsi
 create mode 100644 arch/arm/mach-tegra/fuse.c
 create mode 100644 board/asus/grouper/Kconfig
 create mode 100644 board/asus/grouper/MAINTAINERS
 create mode 100644 board/asus/grouper/Makefile
 create mode 100644 board/asus/grouper/grouper-spl-max.c
 create mode 100644 board/asus/grouper/grouper-spl-ti.c
 create mode 100644 board/asus/grouper/grouper.c
 create mode 100644 board/asus/grouper/pinmux-config-grouper.h
 create mode 100644 board/asus/transformer-t30/Kconfig
 create mode 100644 board/asus/transformer-t30/MAINTAINERS
 create mode 100644 board/asus/transformer-t30/Makefile
 create mode 100644 board/asus/transformer-t30/pinmux-config-transformer.h
 create mode 100644 board/asus/transformer-t30/transformer-t30-spl.c
 create mode 100644 board/asus/transformer-t30/transformer-t30.c
 create mode 100644 board/htc/endeavoru/Kconfig
 create mode 100644 board/htc/endeavoru/MAINTAINERS
 create mode 100644 board/htc/endeavoru/Makefile
 create mode 100644 board/htc/endeavoru/endeavoru-spl.c
 create mode 100644 board/htc/endeavoru/endeavoru.c
 create mode 100644 board/htc/endeavoru/pinmux-config-endeavoru.h
 create mode 100644 board/lg/x3-t30/Kconfig
 create mode 100644 board/lg/x3-t30/MAINTAINERS
 create mode 100644 board/lg/x3-t30/Makefile
 create mode 100644 board/lg/x3-t30/pinmux-config-x3.h
 create mode 100644 board/lg/x3-t30/x3-t30-spl.c
 create mode 100644 board/lg/x3-t30/x3-t30.c
 create mode 100644 configs/endeavoru_defconfig
 create mode 100644 configs/grouper_E1565.config
 create mode 100644 configs/grouper_PM269.config
 create mode 100644 configs/grouper_common_defconfig
 create mode 100644 configs/p1801-t.config
 create mode 100644 configs/p880.config
 create mode 100644 configs/p895.config
 create mode 100644 configs/tf201.config
 create mode 100644 configs/tf300t.config
 create mode 100644 configs/tf300tg.config
 create mode 100644 configs/tf300tl.config
 create mode 100644 configs/tf600t.config
 create mode 100644 configs/tf700t.config
 create mode 100644 configs/tilapia.config
 create mode 100644 configs/transformer_t30_defconfig
 create mode 100644 configs/x3_t30_defconfig
 create mode 100644 doc/board/asus/grouper_common.rst
 create mode 100644 doc/board/asus/index.rst
 create mode 100644 doc/board/asus/transformer_t30.rst
 create mode 100644 doc/board/htc/endeavoru.rst
 create mode 100644 doc/board/htc/index.rst
 create mode 100644 doc/board/lg/index.rst
 create mode 100644 doc/board/lg/x3_t30.rst
 create mode 100644 include/configs/endeavoru.h
 create mode 100644 include/configs/grouper.h
 create mode 100644 include/configs/transformer-common.h
 create mode 100644 include/configs/transformer-t30.h
 create mode 100644 include/configs/x3-t30.h
#1 lore raw
Quoted 11 lines · Thierry Reding

From: Thierry Reding <[email protected]>

Hi Tom,

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 30 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Quoted 6 lines

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10. Second, on Monday after I release -rc3 and merge that in to next, in the next branch we allow for (and encourage!) config fragments to be in the board directory rather than top-level configs/ directory. Please make a patch on top of -next that moves the fragments and updates the MAINTAINERS entries. Thanks all!

Signature · 1 line
Tom
#2 lore raw

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 54 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 34 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Quoted 8 lines
Quoted 2 lines

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Patches Thierry applied are v8, while v9 has significant improvements.

Second, on Monday after I release -rc3 and merge that in to

Quoted 1 line

next, in the next branch we allow for (and encourage!) config fragments

I will apply fragments move in the next patchset for t20/t30 devices which will be send once this pathes are applied. This is acceptable for you?

Best regards,
Svyatoslav R.

Quoted 4 lines

to be in the board directory rather than top-level configs/ directory. Please make a patch on top of -next that moves the fragments and updates the MAINTAINERS entries. Thanks all!

#3 lore raw
Quoted 60 lines · Svyatoslav Ryhel

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 57 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 36 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Quoted 7 lines
Quoted 5 lines

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Patches Thierry applied are v8, while v9 has significant improvements.

OK, I've updated patchwork to try and reflect this too.

Quoted 6 lines

Second, on Monday after I release -rc3 and merge that in to

Quoted 1 line

next, in the next branch we allow for (and encourage!) config fragments

I will apply fragments move in the next patchset for t20/t30 devices which will be send once this pathes are applied. This is acceptable for you?

Yes, I think this will be fine, thanks!

Signature · 1 line
Tom
#4 lore raw

18 серпня 2023 р. 20:04:47 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 67 lines · Svyatoslav Ryhel
Quoted 66 lines

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 62 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 30 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Quoted 6 lines

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Quoted 4 lines
Quoted 1 line

Patches Thierry applied are v8, while v9 has significant improvements.

OK, I've updated patchwork to try and reflect this too.

Merged patches are not the most recent I have sent. How to fix this?

Quoted 9 lines
Quoted 6 lines

Second, on Monday after I release -rc3 and merge that in to

Quoted 1 line

next, in the next branch we allow for (and encourage!) config fragments

I will apply fragments move in the next patchset for t20/t30 devices which will be send once this pathes are applied. This is acceptable for you?

Yes, I think this will be fine, thanks!

#5 lore raw
Quoted 70 lines · Svyatoslav Ryhel

18 серпня 2023 р. 20:04:47 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 67 lines · Svyatoslav Ryhel
Quoted 66 lines

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 62 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 30 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Quoted 6 lines

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

Patches Thierry applied are v8, while v9 has significant improvements.

OK, I've updated patchwork to try and reflect this too.

Merged patches are not the most recent I have sent. How to fix this?

Usually once something has been merged it's difficult to back it out. So unless Tom can (and is willing to) somehow redo the merge with the newest patches, you're going to have to rebase what you have and send out as follow-up patches.

That's one of the reasons why you shouldn't keep sending new versions of patches once things have settled down and there haven't been any more review comments on the list. The assumption is that when you send patches out you think they are all done. They may still need to be updated based on review comments and that's fine because there's communication on the mailing list to indicate so. Once discussions have stopped it is assumed that the patches are done. This doesn't necessarily mean that they get picked up right away, because people might be busy.

The prudent thing to do in such cases, in my experience, is to leave the patches as-is and do any subsequent changes in follow-up patches. If you quickly notice that there will need to be more changes, then let people know as soon as possible, otherwise they may apply patches and run tests on them, all of which will have to be redone if you repost a new version later on.

In this particular case I was in the process of preparing the pull request to Tom and didn't see v9 until I had sent out the PR.

Depending on who you're sending patches to the "point of no return" could be a lot sooner. Once patches are applied to a custodian tree and other patches have been applied on top, switching out new versions of patches can become really messy. Once they hit the mainline it often becomes impossible.

Thierry

#6 lore raw
Quoted 76 lines · Thierry Reding
Quoted 75 lines · Svyatoslav Ryhel

18 серпня 2023 р. 20:04:47 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 71 lines · Svyatoslav Ryhel
Quoted 60 lines

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 57 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 36 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Quoted 7 lines
Quoted 5 lines

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Patches Thierry applied are v8, while v9 has significant improvements.

OK, I've updated patchwork to try and reflect this too.

Quoted 6 lines
Quoted 1 line

Merged patches are not the most recent I have sent. How to fix this?

Usually once something has been merged it's difficult to back it out. So unless Tom can (and is willing to) somehow redo the merge with the newest patches, you're going to have to rebase what you have and send out as follow-up patches.

I would hope that locally, doing a git diff between master with this PR applied and a branch with v9 on it instead would yield a set of changes that are easy to turn in to a follow up patch or series of patches. I really don't want to revert the merge and bring in a new PR instead.

Signature · 1 line
Tom
#7 lore raw

22 серпня 2023 р. 16:13:05 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 84 lines · Thierry Reding
Quoted 76 lines · Svyatoslav Ryhel
Quoted 75 lines

18 серпня 2023 р. 20:04:47 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 71 lines · Svyatoslav Ryhel
Quoted 60 lines

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 57 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 36 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Quoted 7 lines
Quoted 5 lines

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Patches Thierry applied are v8, while v9 has significant improvements.

OK, I've updated patchwork to try and reflect this too.

Quoted 6 lines
Quoted 1 line

Merged patches are not the most recent I have sent. How to fix this?

Usually once something has been merged it's difficult to back it out. So unless Tom can (and is willing to) somehow redo the merge with the newest patches, you're going to have to rebase what you have and send out as follow-up patches.

Quoted 5 lines

I would hope that locally, doing a git diff between master with this PR applied and a branch with v9 on it instead would yield a set of changes that are easy to turn in to a follow up patch or series of patches. I really don't want to revert the merge and bring in a new PR instead.

Alright, done.

#8 lore raw
In reply to Svyatoslav Ryhel
Quoted 60 lines · Svyatoslav Ryhel

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 57 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 36 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Quoted 7 lines
Quoted 5 lines

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Patches Thierry applied are v8, while v9 has significant improvements.

I'm a little surprised by how this series developed. You've been urging me since v6 to apply this, so I assumed this was mostly done. Having another 3 versions with significant improvements come in after that point indicates the opposite was true.

Thierry

#9 lore raw

21 серпня 2023 р. 16:59:58 GMT+03:00, Thierry Reding <[email protected]> написав(-ла):

Quoted 67 lines · Svyatoslav Ryhel
Quoted 66 lines

18 серпня 2023 р. 19:49:43 GMT+03:00, Tom Rini <[email protected]> написав(-ла):

Quoted 62 lines · Thierry Reding
Quoted 5 lines

From: Thierry Reding <[email protected]>

Hi Tom,

Quoted 7 lines

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

Quoted 30 lines

for you to fetch changes up to bdf9dead86f06c7d6980c399a4a6339430b531ec:

board: htc: endeavoru: add One X support (2023-06-30 15:20:37 +0200)

This passes CI successfully:

https://source.denx.de/u-boot/custodians/u-boot-tegra/-/pipelines/17411

Thanks,
Thierry

----------------------------------------------------------------
ARM: tegra: Changes for v2023.10-rc1

This adds support for various new Tegra30 boards (ASUS, LG and HTC) and has some other minor enhancements, such as enabling the poweroff command on several Tegra210 and Tegra186 boards.

----------------------------------------------------------------
Jonas Schwöbel (1):
configs: tegra-common-post: make PXE and DHCP boot targets optional

Svyatoslav Ryhel (6):
configs: tegra-common-post: add GPIO keyboard as STDIN device
ARM: tegra: add SoC UID calculation function
board: asus: transformer: add ASUS Transformer T30 family support
board: asus: grouper: add Google Nexus 7 (2012) support
board: lg: x3: add Optimus 4X HD and Optimus Vu support
board: htc: endeavoru: add One X support

Quoted 6 lines

Thierry Reding (2):
ARM: tegra: Enable poweroff command on Jetson TX1 and Jetson Nano
ARM: tegra: Enable poweroff command on Jetson TX2

Tomasz Maciej Nowak (1):
ARM: dts: trimslice: sync SPI node with Linux dts

Since I'm not sure if this is v8 or v9, given when v9 was posted, I've applied this PR now, as I had said I wanted this in. I do have two requests for you Svyatoslav, however. First, if there's changes that are missing in master, please post those ASAP and we'll get them in, for v2023.10.

Quoted 6 lines
Quoted 1 line

Patches Thierry applied are v8, while v9 has significant improvements.

I'm a little surprised by how this series developed. You've been urging me since v6 to apply this, so I assumed this was mostly done. Having another 3 versions with significant improvements come in after that point indicates the opposite was true.

View changes, same as code. I am adapting and changing this to my needs and if you have hold it more, your would get even more iterations. Only way to stop is to upstream.

Quoted 1 line

Thierry

#10 lore raw
In reply to Tom Rini
Quoted 12 lines · Tom Rini
Quoted 10 lines · Thierry Reding

From: Thierry Reding <[email protected]>

Hi Tom,

The following changes since commit 68c07fc5fdf34f0926cf06fc0c4ebd6f2f3afe19:

Merge https://source.denx.de/u-boot/custodians/u-boot-usb (2023-06-21 14:42:50 -0400)

are available in the Git repository at:

Quoted 7 lines
Quoted 1 line

[email protected]:u-boot/custodians/u-boot-tegra.git tags/tegra-for-2023.10-rc1

FYI, in your .git/config you can do:
url = https://source.denx.de/u-boot/custodians/u-boot-tegra.git
pushurl = [email protected]:u-boot/custodians/u-boot-tegra.git

And this part looks "nicer". Not a big deal, just an FYI.

This actually comes from a script that doesn't use the git config but takes this from gitlab directly using the REST API. This is primarily because the script also gets the link to the CI pipeline from there so it was convenient.

Anyway, I wasn't sure if you preferred the HTTPS link or the SSH link, but I can update the script now that I know. =)

Thierry