Skip to contentSkip to conversation

maple_tree: mas_wr_append() fix ups

PATCH Applied Liam R. Howlett 9 participants 46 messages Aug 19, 2023 – Oct 16, 2023

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover maple_tree: mas_wr_append() fix ups

There is a potential of an update causing issue with a reader when appending, so disable the append operation when readers a present.

The code was also missing some documentation, tracing, and some cleanup was possible. These changes are in the second patch as there's no compelling reason to require a difficult backport.

Changes since v1:
- Added fixes tag to the first patch

v1: https://lore.kernel.org/linux-mm/[email protected]/

Liam R. Howlett (2):
maple_tree: Disable mas_wr_append() when other readers are possible
maple_tree: Clean up mas_wr_append()

 lib/maple_tree.c | 41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)
Signature · 1 line
2.39.2
#1 lore raw

PATCH v2 1/2 maple_tree: Disable mas_wr_append() when other readers are possible

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")
---
 lib/maple_tree.c | 7 +++++++
 1 file changed, 7 insertions(+)
lib/maple_tree.c +7 -0
index ffb9d15bd815..05d5db255c39 100644
@@ -4107,6 +4107,10 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas)
  * mas_wr_append: Attempt to append
  * @wr_mas: the maple write state
  *
+ * This is currently unsafe in rcu mode since the end of the node may be cached
+ * by readers while the node contents may be updated which could result in
+ * inaccurate information.
+ *
  * Return: True if appended, false otherwise
  */
 static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
@@ -4116,6 +4120,9 @@ static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
 	struct ma_state *mas = wr_mas->mas;
 	unsigned char node_pivots = mt_pivots[wr_mas->type];
 
+	if (mt_in_rcu(mas->tree))
+		return false;
+
 	if (mas->offset != wr_mas->node_end)
 		return false;
 
Signature · 1 line
2.39.2
#2 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Liam,

Quoted 38 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

Quoted 7 lines

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns /soc/timer@e803b000: used for clocksource
/soc/timer@e803c000: used for clock events
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
+Interrupts were enabled early
+CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237 +Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Reverting this commit fixes the issue.

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options).

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

Do you have a clue?
Thanks!

Quoted 25 lines
lib/maple_tree.c +7 -0
@@ -4107,6 +4107,10 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas)
 * mas_wr_append: Attempt to append
 * @wr_mas: the maple write state
 *
+ * This is currently unsafe in rcu mode since the end of the node may be cached
+ * by readers while the node contents may be updated which could result in
+ * inaccurate information.
+ *
 * Return: True if appended, false otherwise
 */
 static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
@@ -4116,6 +4120,9 @@ static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
 	struct ma_state *mas = wr_mas->mas;
 	unsigned char node_pivots = mt_pivots[wr_mas->type];
 
+	if (mt_in_rcu(mas->tree))
+		return false;
+
 	if (mas->offset != wr_mas->node_end)
 		return false;
 
Signature · 1 line
2.39.2

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#3 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 63 lines · Geert Uytterhoeven

Hi Liam,

Quoted 38 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

Quoted 7 lines

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

      clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
      sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
      /soc/timer@e803b000: used for clocksource
      /soc/timer@e803c000: used for clock events
     +------------[ cut here ]------------
     +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
     +Interrupts were enabled early

...

Quoted 4 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

There's something similar on pmac32 / mac99.

Quoted 1 line

Do you have a clue?

It seems something in the maple tree code is setting TIF_NEED_RESCHED, and that causes a subsequent call to cond_resched() to call schedule() and enable interrupts.

On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. But I don't see why.

cheers

#4 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Michael,

Quoted 70 lines · Michael Ellerman
Quoted 61 lines · Geert Uytterhoeven
Quoted 38 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

Quoted 7 lines

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

      clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
      sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
      /soc/timer@e803b000: used for clocksource
      /soc/timer@e803c000: used for clock events
     +------------[ cut here ]------------
     +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
     +Interrupts were enabled early

...

Quoted 4 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

There's something similar on pmac32 / mac99.

Quoted 8 lines
Quoted 1 line

Do you have a clue?

It seems something in the maple tree code is setting TIF_NEED_RESCHED, and that causes a subsequent call to cond_resched() to call schedule() and enable interrupts.

On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. But I don't see why.

Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does fix the problem.
But there must be more to it, as some of my test configs had it enabled, and others hadn't, while only RZ/A showed the issue.
I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and that did not cause the problem to happen...

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#5 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 82 lines · Geert Uytterhoeven

Hi Michael,

Quoted 70 lines · Michael Ellerman
Quoted 61 lines · Geert Uytterhoeven
Quoted 38 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

Quoted 7 lines

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

       clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
       sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
       /soc/timer@e803b000: used for clocksource
       /soc/timer@e803c000: used for clock events
      +------------[ cut here ]------------
      +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
      +Interrupts were enabled early

...

Quoted 4 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

There's something similar on pmac32 / mac99.

Quoted 8 lines
Quoted 1 line

Do you have a clue?

It seems something in the maple tree code is setting TIF_NEED_RESCHED, and that causes a subsequent call to cond_resched() to call schedule() and enable interrupts.

On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. But I don't see why.

Quoted 6 lines

Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does fix the problem.
But there must be more to it, as some of my test configs had it enabled, and others hadn't, while only RZ/A showed the issue.
I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and that did not cause the problem to happen...

I guess this patch triggers a potential problem with the maple tree. I don't have the environment to trigger the problem. Can you apply the following patch to see if the problem still exists? This can help locate the root cause. At least narrow down the scope of the code that has bug.

Thanks.

lib/maple_tree.c +0 -3
index f723024e1426..1b4b6f6e3095 100644
@@ -4351,9 +4351,6 @@ static inline void mas_wr_modify(struct ma_wr_state *wr_mas)
 	if (new_end == wr_mas->node_end && mas_wr_slot_store(wr_mas))
 		return;
 
-	if (mas_wr_node_store(wr_mas, new_end))
-		return;
-
 	if (mas_is_err(mas))
 		return;
 
Quoted 5 lines

Gr{oetje,eeting}s,

Geert

#6 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Peng,

Quoted 88 lines · Peng Zhang
Quoted 80 lines · Geert Uytterhoeven
Quoted 70 lines · Michael Ellerman
Quoted 61 lines · Geert Uytterhoeven
Quoted 38 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata read old end pivot return with incorrect range
store new value

Alternatively:

Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata read old end pivot read new end pivot return with incorrect range
set old end pivot

Quoted 7 lines

There may be other accesses that are not safe since we are now updating both metadata and pointers, so disabling append if there could be rcu readers is the safest action.

Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

       clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
       sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
       /soc/timer@e803b000: used for clocksource
       /soc/timer@e803c000: used for clock events
      +------------[ cut here ]------------
      +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
      +Interrupts were enabled early

...

Quoted 4 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

There's something similar on pmac32 / mac99.

Quoted 8 lines
Quoted 1 line

Do you have a clue?

It seems something in the maple tree code is setting TIF_NEED_RESCHED, and that causes a subsequent call to cond_resched() to call schedule() and enable interrupts.

On pmac32 enabling CONFIG_DEBUG_ATOMIC_SLEEP fixes/hides the problem. But I don't see why.

Quoted 6 lines

Enabling CONFIG_DEBUG_ATOMIC_SLEEP on RZ/A1 and RZ/A2 does fix the problem.
But there must be more to it, as some of my test configs had it enabled, and others hadn't, while only RZ/A showed the issue.
I tried disabling it on R-Car M2-W (arm32) and R-Car H3 (arm64), and that did not cause the problem to happen...

Quoted 4 lines

I guess this patch triggers a potential problem with the maple tree. I don't have the environment to trigger the problem. Can you apply the following patch to see if the problem still exists? This can help locate the root cause. At least narrow down the scope of the code that has bug.

Thanks for your suggestion!

Quoted 5 lines
lib/maple_tree.c +0 -0
index f723024e1426..1b4b6f6e3095 100644

lib/maple_tree.c static inline void mas_wr_modify(struct · line 4356

Quoted 9 lines
lib/maple_tree.c +0 -3
@@ -4351,9 +4351,6 @@ static inline void mas_wr_modify(struct
 ma_wr_state *wr_mas)
        if (new_end == wr_mas->node_end && mas_wr_slot_store(wr_mas))
                return;
 
-       if (mas_wr_node_store(wr_mas, new_end))
-               return;
-
        if (mas_is_err(mas))
                return;

Unfortunately removing these lines does not help.

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#7 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Geert Uytterhoeven

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 7 lines · Geert Uytterhoeven

Hi Liam,

Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 12 lines
Quoted 4 lines
Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 7 lines
     clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
     sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
     /soc/timer@e803b000: used for clocksource
     /soc/timer@e803c000: used for clock events
    +------------[ cut here ]------------
    +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
    +Interrupts were enabled early

Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc.

Quoted 1 line
    +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237

I cannot find commit id 99b80d6b92b5.

Quoted 12 lines

+Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Quoted 1 line

Reverting this commit fixes the issue.

I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue?

It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is as follows:

qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot" -prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048 -hda powerpc32.img -nographic -kernel <file>

Quoted 16 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

Quoted 3 lines

CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options).

Thanks, I'll add it to my list of work.

Quoted 6 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

Do you have a clue?

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Thanks,
Liam

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.5.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Debian 13.2.0-2) 13.2.0" CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130200
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24100
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24100
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=124
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set

# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BPF_JIT is not set

# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set

# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y

# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#

# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC11_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y

# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

# end of General setup

CONFIG_PPC32=y
# CONFIG_PPC64 is not set

#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
CONFIG_PPC_BOOK3S_603=y
CONFIG_PPC_BOOK3S_604=y
CONFIG_POWERPC_CPU=y
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
# CONFIG_G4_CPU is not set
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="powerpc"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
CONFIG_NR_CPUS=1

# end of Processor support

CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y

#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
CONFIG_PPC_CHRP=y
# CONFIG_PPC_MPC512x is not set
CONFIG_PPC_MPC52xx=y
# CONFIG_PPC_MPC5200_SIMPLE is not set
CONFIG_PPC_EFIKA=y
# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_PMAC=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_PPC_MPC106=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y

# end of CPU Frequency scaling

#
# CPUIdle driver
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set

# end of CPU Idle
# end of CPUIdle driver

CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set

# end of Platform support

#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=12
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set

# end of Kernel options

CONFIG_ISA_DMA_API=y

#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set

# end of Bus options

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used #
CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xb0000000

# end of Advanced setup

CONFIG_PPC_LIB_RHEAP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM_BOOK3S_32 is not set
CONFIG_HAVE_LIVEPATCH=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_MMU_GATHER_PAGE_SIZE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y CONFIG_MMU_LAZY_TLB_REFCOUNT=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING_USER=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_ARCH_MMAP_RND_BITS=11 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_HAVE_OBJTOOL=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_HAVE_ARCH_NVRAM_OPS=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND=y CONFIG_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_HAVE_STATIC_CALL=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_SPLIT_ARG64=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y

# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT=0

# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_CGROUP_PUNT_BIO=y CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set

# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set CONFIG_ZSMALLOC_CHAIN_SIZE=8

#
# SLAB allocator options
#
# CONFIG_SLAB_DEPRECATED is not set
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set

# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set

# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_HMARK=m CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_NAT is not set CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
# CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m

# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set

# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
# CONFIG_NFT_BRIDGE_REJECT is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set

# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
# CONFIG_6LOWPAN is not set CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
CONFIG_NET_SCH_MQPRIO_LIB=m
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_MAX_SKB_FRAGS=17
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m

# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m

# end of AX.25 network device drivers

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBCM4377 is not set
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
CONFIG_BT_HCIRSI=m
# CONFIG_BT_VIRTIO is not set

# end of Bluetooth device drivers

CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_IPV6 is not set
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_RXPERF is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_TRF7970A is not set
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_PN533_USB is not set
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_ST95HF is not set

# end of Near Field Communication (NFC) devices

# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set

#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set

# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set

# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#

# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set

# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set

# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set

# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MOXTET is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set

# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol #

# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#

# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_MAC_FLOPPY=y
CONFIG_CDROM=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_ZRAM_MULTI_COMP is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set

# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set

# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set

# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set

# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m

# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
# CONFIG_SCSI_MYRB is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_EFCT is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=m
CONFIG_SCSI_MESH_SYNC_RATE=5
CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
CONFIG_SCSI_MAC53C94=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_FDOMAIN is not set
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set

# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MACIO=y
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPC52xx=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PARPORT is not set

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set # CONFIG_BCACHE_ASYNC_REGISTRATION is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_AUDIT is not set CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set CONFIG_SBP_TARGET=m
# CONFIG_REMOTE_TARGET is not set CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m

# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
# CONFIG_PMAC_APM_EMU is not set
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
CONFIG_ADB_MACIO=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
CONFIG_ANSLCD=m
CONFIG_PMAC_RACKMETER=m
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NET_VENDOR_APPLE=y
CONFIG_MACE=m
# CONFIG_MACE_AAUI_PORT is not set
CONFIG_BMAC=m
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC_MPC52xx=m
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
# CONFIG_GIANFAR is not set
# CONFIG_FSL_ENETC is not set
# CONFIG_FSL_ENETC_VF is not set
# CONFIG_FSL_ENETC_IERB is not set
# CONFIG_FSL_ENETC_MDIO is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=m
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
# CONFIG_MLX5_CORE_EN is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=m
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_PHYLIB_LEDS=y
CONFIG_FIXED_PHY=m
# CONFIG_SFP is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_T1S_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_EMS_PCMCIA=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set

# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_F81604 is not set
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set

# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_FWNODE_MDIO=m
CONFIG_OF_MDIO=m
CONFIG_MDIO_DEVRES=m
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_IPQ4019 is not set

#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set

#
# PCS device drivers
#

# end of PCS device drivers

# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
# CONFIG_PPPOE_HASH_BITS_1 is not set
# CONFIG_PPPOE_HASH_BITS_2 is not set
CONFIG_PPPOE_HASH_BITS_4=y
# CONFIG_PPPOE_HASH_BITS_8 is not set
CONFIG_PPPOE_HASH_BITS=4
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Host-side USB support is needed for USB Network Adapter support #
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_HUAWEI_CDC_NCM=m CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET_ENABLE=m CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_PCI_NO_EEPROM is not set CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_USB is not set
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
# CONFIG_ATH12K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=m
# CONFIG_PCI_ATMEL is not set
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO=m
CONFIG_AIRO_CS=m
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m

#

# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# end of iwl3945 / iwl4965 Debugging Options

CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set

# end of Debugging Options

CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
# CONFIG_MWIFIEX_USB is not set
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
# CONFIG_MT7921E is not set
# CONFIG_MT7921S is not set
# CONFIG_MT7921U is not set
# CONFIG_MT7996E is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
# CONFIG_RSI_SDIO is not set
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_MAC80211_HWSIM=m
# CONFIG_VIRT_WIFI is not set
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
# CONFIG_HDLC_X25 is not set
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_IEEE802154_DRIVERS=m

#
# Wireless WAN
#
# CONFIG_WWAN is not set

# end of Wireless WAN

CONFIG_VMXNET3=m
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADC is not set
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_SUR40=m
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=m
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCILIB=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set

# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_IPWIRELESS=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_APPLICOM=m
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set

# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set

# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# Mac SMBus host controller drivers
#
CONFIG_I2C_HYDRA=m
CONFIG_I2C_POWERMAC=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PCI1XXXX is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set

# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set

# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_MPC52xx is not set
CONFIG_SPI_MPC52xx_PSC=m
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set

# end of PTP clock support

# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_OF_GPIO_MM_GPIOCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MPC5200=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set

# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_FXL6408 is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

# end of I2C GPIO expanders

#
# MFD GPIO expanders
#

# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set

# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set

# end of Virtual GPIO drivers

CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set

# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set

# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_WATCHDOG_RTAS=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RK8XX_SPI is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_MFD_TPS6594_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_INTEL_M10_BMC_SPI is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set

# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
# CONFIG_LIRC is not set
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SERIAL is not set
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_TOY is not set
CONFIG_IR_TTUSBIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
# CONFIG_RC_XBOX_DVD is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set

# end of CEC support

CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y

# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m

# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m

# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y

# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

#
# Analog TV USB devices
#
# CONFIG_VIDEO_GO7007 is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m

#
# Digital TV USB devices
#
# CONFIG_DVB_AS102 is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not set
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set
# CONFIG_USB_MSI2500 is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
CONFIG_VIDEO_ZORAN=m
# CONFIG_VIDEO_ZORAN_DC30 is not set
# CONFIG_VIDEO_ZORAN_ZR36060 is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_DT3155 is not set
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
# CONFIG_DVB_NETUP_UNIDVB is not set
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_SMIPCIE is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
# CONFIG_RADIO_SI4713 is not set
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
# CONFIG_I2C_SI470X is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_MUX is not set

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
# CONFIG_VIDEO_CADENCE_CSI2TX is not set

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m

#
# Mediatek media platform drivers
#

#
# Microchip Technology, Inc. media platform drivers #

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#

#
# Qualcomm media platform drivers
#

#
# Renesas media platform drivers
#

#
# Rockchip media platform drivers
#

#
# Samsung media platform drivers
#

#
# STMicroelectronics media platform drivers
#

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#

#
# Verisilicon media platform drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
# CONFIG_VIDEO_XILINX is not set

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_VIDEO_VIMC is not set
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VISL is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#

# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers' #
CONFIG_VIDEO_IR_I2C=m

#
# Camera sensor devices
#
# CONFIG_VIDEO_AR0521 is not set
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX296 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_IMX412 is not set
# CONFIG_VIDEO_IMX415 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_OG01A1B is not set
# CONFIG_VIDEO_OV01A10 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
# CONFIG_VIDEO_OV08X40 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV4689 is not set
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8858 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9282 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_ST_VGXY61 is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set

# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set

# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m

# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_MAX9286 is not set
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TC358746 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
# CONFIG_VIDEO_THS8200 is not set

# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set

# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_ST_MIPID02 is not set
# CONFIG_VIDEO_THS7303 is not set

# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# CONFIG_VIDEO_GS1662 is not set

# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m

# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_CXD2880 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #
# CONFIG_DVB_MN88443X is not set CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=m
# CONFIG_DVB_HELENE is not set
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set

# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y CONFIG_VIDEO_CMDLINE=y CONFIG_VIDEO_NOMODESET=y
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_DISPLAY_HELPER=m CONFIG_DRM_DISPLAY_DP_HELPER=y CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m CONFIG_DRM_TTM_HELPER=m CONFIG_DRM_GEM_SHMEM_HELPER=m CONFIG_DRM_SUBALLOC_HELPER=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set

# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_KOMEDA is not set

# end of ARM devices

CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_QXL=m
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set # CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set # CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set

# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set # CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SAMSUNG_DSIM is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set

# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m

#
# Frame buffer Devices
#
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IO_HELPERS=y
CONFIG_FB_SYS_HELPERS=y
CONFIG_FB_SYS_HELPERS_DEFERRED=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_LIME is not set
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set

# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set

# end of Backlight & LCD device support

CONFIG_VGASTATE=m
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set

# end of Console display driver support

# CONFIG_LOGO is not set

# end of Graphics support

# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
# CONFIG_SND_SEQ_UMP is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_PCMTEST is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m

#
# HD-Audio
#
CONFIG_SND_HDA=m CONFIG_SND_HDA_GENERIC_LEDS=y CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_ANALOG=m CONFIG_SND_HDA_CODEC_SIGMATEL=m CONFIG_SND_HDA_CODEC_VIA=m CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_HDA_CODEC_CIRRUS=m
# CONFIG_SND_HDA_CODEC_CS8409 is not set CONFIG_SND_HDA_CODEC_CONEXANT=m CONFIG_SND_HDA_CODEC_CA0110=m CONFIG_SND_HDA_CODEC_CA0132=m CONFIG_SND_HDA_CODEC_CA0132_DSP=y CONFIG_SND_HDA_CODEC_CMEDIA=m CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set # CONFIG_SND_HDA_CTL_DEV_ID is not set

# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_AUDIO_MIDI_V2 is not set
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
CONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
# CONFIG_HID_EVISION is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=m
# CONFIG_HID_NVIDIA_SHIELD is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set

# end of Special HID drivers

#
# HID-BPF support
#

# end of HID-BPF support

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

# end of USB HID Boot Protocol drivers
# end of USB HID support

# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
# CONFIG_USB_ONBOARD_HUB is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set

# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_PWRSEQ_EMMC=m
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=256
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFS_BSG is not set
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_EL15203000 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_BD2606MVV is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_LM3697 is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m

# end of Speakup console speech

CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
# CONFIG_INFINIBAND_VMWARE_PVRDMA is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

1,851 lines not shown · raw message

Part of this message is not shown here. View the raw message.

maintainer
#8 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 106 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 7 lines · Geert Uytterhoeven

Hi Liam,

Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 12 lines
Quoted 4 lines
Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 7 lines
     clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
     sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
     /soc/timer@e803b000: used for clocksource
     /soc/timer@e803c000: used for clock events
    +------------[ cut here ]------------
    +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
    +Interrupts were enabled early

Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc.

Quoted 1 line
    +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237

I cannot find commit id 99b80d6b92b5.

Quoted 12 lines

+Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Quoted 1 line

Reverting this commit fixes the issue.

I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue?

It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is as follows:

qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot"

(quoted diff) +0 -2
-prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048
-hda powerpc32.img -nographic -kernel <file>
Quoted 5 lines

RCU-related configs:

Quoted 13 lines
    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

Quoted 3 lines

CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options).

Thanks, I'll add it to my list of work.

Quoted 6 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

Do you have a clue?

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

Quoted 8 lines

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

If so, the answer is "no" (and yes, there might be a bug, but then again I just double-checked). However, if interrupts are enabled across a call_rcu() invocation, it will do some additional work to encourage the grace period. Even if interrupts are disabled across a call_rcu() invocation, it will still do either a raise_softirq() or a wakeup, depending on configuration, to encourage the grace period. And in the case of call_rcu() from an interrupt handler, that raise_softirq() could result in the RCU_SOFTIRQ handler running upon return from that interrupt, and if there are a great many callbacks ready to invoke, this RCU_SOFTIRQ handler might take quite some time. Plus that handler could itself be interrupted.

If long-running RCU_SOFTIRQ handlers are a problem, you can boot with rcutree.use_softirq=0, which puts that handler into a kthread, which in turn give the scheduler more control. However, this will also turn a lightweight raise_softirq() into a rather heavier weight wakeup. Choose wisely! ;-)

Or am I missing your point?

Thanx, Paul

Quoted 8,193 lines

Thanks,
Liam

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.5.0-rc4 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="powerpc-linux-gnu-gcc (Debian 13.2.0-2) 13.2.0" CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130200
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24100
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24100
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=124
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set

# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y

# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# CONFIG_BPF_JIT is not set

# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set

# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y

# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#

# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC11_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_KCMP=y
CONFIG_RSEQ=y
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y

# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y

# end of General setup

CONFIG_PPC32=y
# CONFIG_PPC64 is not set

#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
CONFIG_PPC_BOOK3S_603=y
CONFIG_PPC_BOOK3S_604=y
CONFIG_POWERPC_CPU=y
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
# CONFIG_G4_CPU is not set
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="powerpc"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
CONFIG_NR_CPUS=1

# end of Processor support

CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y

#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
CONFIG_PPC_CHRP=y
# CONFIG_PPC_MPC512x is not set
CONFIG_PPC_MPC52xx=y
# CONFIG_PPC_MPC5200_SIMPLE is not set
CONFIG_PPC_EFIKA=y
# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_PMAC=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_AMIGAONE is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
CONFIG_RTAS_PROC=y
CONFIG_PPC_MPC106=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT is not set
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y

# end of CPU Frequency scaling

#
# CPUIdle driver
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set

# end of CPU Idle
# end of CPUIdle driver

CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set

# end of Platform support

#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=12
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0"
CONFIG_CMDLINE_FROM_BOOTLOADER=y
# CONFIG_CMDLINE_EXTEND is not set
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set

# end of Kernel options

CONFIG_ISA_DMA_API=y

#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set

# end of Bus options

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used #
CONFIG_LOWMEM_SIZE=0x30000000 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xb0000000

# end of Advanced setup

CONFIG_PPC_LIB_RHEAP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM_BOOK3S_32 is not set
CONFIG_HAVE_LIVEPATCH=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_32BIT_OFF_T=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_MMU_GATHER_PAGE_SIZE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y CONFIG_MMU_LAZY_TLB_REFCOUNT=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_LTO_NONE=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING_USER=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_ARCH_MMAP_RND_BITS=11 CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y CONFIG_HAVE_OBJTOOL=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_HAVE_ARCH_NVRAM_OPS=y CONFIG_CLONE_BACKWARDS=y CONFIG_OLD_SIGSUSPEND=y CONFIG_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_HAVE_STATIC_CALL=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_SPLIT_ARG64=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y

# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT=0

# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_CGROUP_PUNT_BIO=y CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set

# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set CONFIG_ZSMALLOC_CHAIN_SIZE=8

#
# SLAB allocator options
#
# CONFIG_SLAB_DEPRECATED is not set
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set

# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_HMM_MIRROR=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set

# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_REDIRECT=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CONNTRACK_OVS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_OVS=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
# CONFIG_NFT_MASQ is not set
# CONFIG_NFT_REDIR is not set
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_HMARK=m CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_NAT is not set CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
# CONFIG_NETFILTER_XT_TARGET_MASQUERADE is not set CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m

# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
# CONFIG_IP_SET_HASH_IPMAC is not set
# CONFIG_IP_SET_HASH_MAC is not set
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP6_NF_NAT is not set

# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
# CONFIG_NFT_BRIDGE_REJECT is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y

# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set

# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_IB=y CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
# CONFIG_6LOWPAN is not set CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
CONFIG_NET_SCH_MQPRIO_LIB=m
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_TRACING is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_MAX_SKB_FRAGS=17
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m

# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m

# end of AX.25 network device drivers

CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBCM4377 is not set
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
CONFIG_BT_HCIRSI=m
# CONFIG_BT_VIRTIO is not set

# end of Bluetooth device drivers

CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_IPV6 is not set
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_INJECT_RX_DELAY is not set
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_RXPERF is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_FD=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_TRF7970A is not set
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
# CONFIG_NFC_PN533_USB is not set
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_ST95HF is not set

# end of Near Field Communication (NFC) devices

# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SELFTESTS=m
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set

#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set

# end of Cadence-based PCIe controllers

#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set

# end of DesignWare-based PCIe controllers

#
# Mobiveil-based PCIe controllers
#

# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set

# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_DEBUG=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set

# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set

# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MOXTET is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set

# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol #

# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#

# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_FD_RAWCMD is not set
CONFIG_MAC_FLOPPY=y
CONFIG_CDROM=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_ZRAM_MULTI_COMP is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set

# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_PHANTOM=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set

# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set

# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# CONFIG_GP_PCI1XXXX is not set

# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m

# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
# CONFIG_SCSI_MYRB is not set
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
# CONFIG_SCSI_SNIC is not set
CONFIG_SCSI_DMX3191D=m
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_IPS=m
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_INIA100=m
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_EFCT is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=m
CONFIG_SCSI_MESH_SYNC_RATE=5
CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
CONFIG_SCSI_MAC53C94=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_FDOMAIN is not set
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set

# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MACIO=y
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPC52xx=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_PARPORT is not set

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set # CONFIG_BCACHE_ASYNC_REGISTRATION is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_AUDIT is not set CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
# CONFIG_ISCSI_TARGET_CXGB4 is not set CONFIG_SBP_TARGET=m
# CONFIG_REMOTE_TARGET is not set CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m

# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
# CONFIG_PMAC_APM_EMU is not set
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
CONFIG_ADB_MACIO=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
CONFIG_ANSLCD=m
CONFIG_PMAC_RACKMETER=m
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_ATM_SOLOS=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NET_VENDOR_APPLE=y
CONFIG_MACE=m
# CONFIG_MACE_AAUI_PORT is not set
CONFIG_BMAC=m
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FREESCALE=y
CONFIG_FEC_MPC52xx=m
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
# CONFIG_GIANFAR is not set
# CONFIG_FSL_ENETC is not set
# CONFIG_FSL_ENETC_VF is not set
# CONFIG_FSL_ENETC_IERB is not set
# CONFIG_FSL_ENETC_MDIO is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_ADI=y
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MV643XX_ETH=m
CONFIG_MVMDIO=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
# CONFIG_MLX5_CORE_EN is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETERION=y
CONFIG_S2IO=m
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=m
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_PHYLIB_LEDS=y
CONFIG_FIXED_PHY=m
# CONFIG_SFP is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_LXT_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_T1S_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=m
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_NETLINK=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_CAN327 is not set
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_SLCAN=m
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_EMS_PCMCIA=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_SJA1000_ISA=m
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set

# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
# CONFIG_CAN_ESD_USB is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_F81604 is not set
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set

# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
CONFIG_FWNODE_MDIO=m
CONFIG_OF_MDIO=m
CONFIG_MDIO_DEVRES=m
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_IPQ4019 is not set

#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set

#
# PCS device drivers
#

# end of PCS device drivers

# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
# CONFIG_PPPOE_HASH_BITS_1 is not set
# CONFIG_PPPOE_HASH_BITS_2 is not set
CONFIG_PPPOE_HASH_BITS_4=y
# CONFIG_PPPOE_HASH_BITS_8 is not set
CONFIG_PPPOE_HASH_BITS=4
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Host-side USB support is needed for USB Network Adapter support #
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_HUAWEI_CDC_NCM=m CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m CONFIG_USB_NET_CDC_SUBSET_ENABLE=m CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set CONFIG_USB_RTL8153_ECM=m
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
# CONFIG_ATH9K_DEBUGFS is not set
# CONFIG_ATH9K_DYNACK is not set
# CONFIG_ATH9K_WOW is not set
CONFIG_ATH9K_RFKILL=y
# CONFIG_ATH9K_CHANNEL_CONTEXT is not set CONFIG_ATH9K_PCOEM=y
# CONFIG_ATH9K_PCI_NO_EEPROM is not set CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_ATH9K_HWRNG is not set
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_WIL6210_DEBUGFS=y
CONFIG_ATH10K=m
CONFIG_ATH10K_CE=y
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_USB is not set
# CONFIG_ATH10K_DEBUG is not set
# CONFIG_ATH10K_DEBUGFS is not set
# CONFIG_ATH10K_TRACING is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
# CONFIG_ATH12K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=m
# CONFIG_PCI_ATMEL is not set
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set CONFIG_B43_PCI_AUTOSELECT=y CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO=m
CONFIG_AIRO_CS=m
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m

#

# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
# end of iwl3945 / iwl4965 Debugging Options

CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set

# end of Debugging Options

CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_APPLE_AIRPORT=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
# CONFIG_MWIFIEX_USB is not set
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
# CONFIG_MT7921E is not set
# CONFIG_MT7921S is not set
# CONFIG_MT7921U is not set
# CONFIG_MT7996E is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_PURELIFI=y
# CONFIG_PLFXLC is not set
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
# CONFIG_RT2800USB_UNKNOWN is not set
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
CONFIG_RSI_DEBUGFS=y
# CONFIG_RSI_SDIO is not set
CONFIG_RSI_USB=m
CONFIG_RSI_COEX=y
CONFIG_WLAN_VENDOR_SILABS=y
# CONFIG_WFX is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_MAC80211_HWSIM=m
# CONFIG_VIRT_WIFI is not set
CONFIG_WAN=y
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
# CONFIG_HDLC_X25 is not set
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_IEEE802154_DRIVERS=m

#
# Wireless WAN
#
# CONFIG_WWAN is not set

# end of Wireless WAN

CONFIG_VMXNET3=m
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
# CONFIG_MISDN_NETJET is not set
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
CONFIG_INPUT_VIVALDIFMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
# CONFIG_JOYSTICK_ADC is not set
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=m
CONFIG_JOYSTICK_IFORCE_232=m
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=m
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
CONFIG_TOUCHSCREEN_SUR40=m
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=m
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
# CONFIG_RMI4_SMB is not set
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_XILINX_XPS_PS2 is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCILIB=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
# CONFIG_SERIAL_PMACZILOG_TTYS is not set
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set

# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
CONFIG_IPWIRELESS=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_RTAS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_APPLICOM=m
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set

# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_GPMUX is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set

# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# Mac SMBus host controller drivers
#
CONFIG_I2C_HYDRA=m
CONFIG_I2C_POWERMAC=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_RK3X is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PCI1XXXX is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set

# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set

# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_MPC52xx is not set
CONFIG_SPI_MPC52xx_PSC=m
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_MICROCHIP_CORE is not set
# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PCI1XXXX is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_PTP_1588_CLOCK_OPTIONAL=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set

# end of PTP clock support

# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_OF_GPIO_MM_GPIOCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
CONFIG_GPIO_MPC5200=y
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set

# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_FXL6408 is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

# end of I2C GPIO expanders

#
# MFD GPIO expanders
#

# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# CONFIG_GPIO_VIPERBOARD is not set

# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set

# end of Virtual GPIO drivers

CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set

# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS250X is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set

# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_WATCHDOG_RTAS=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_OCELOT is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RK8XX_SPI is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_MFD_TPS6594_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_INTEL_M10_BMC_SPI is not set
# CONFIG_MFD_RSMU_I2C is not set
# CONFIG_MFD_RSMU_SPI is not set

# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
# CONFIG_LIRC is not set
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
# CONFIG_IR_IMON_DECODER is not set
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_REDRAT3=m
# CONFIG_IR_SERIAL is not set
CONFIG_IR_STREAMZAP=m
# CONFIG_IR_TOY is not set
CONFIG_IR_TTUSBIR=m
CONFIG_RC_ATI_REMOTE=m
CONFIG_RC_LOOPBACK=m
# CONFIG_RC_XBOX_DVD is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set

# end of CEC support

CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y

# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m

# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_FWNODE=m
CONFIG_V4L2_ASYNC=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m

# end of Video4Linux options

#
# Media controller options
#
CONFIG_MEDIA_CONTROLLER_DVB=y

# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

# end of Digital TV options

#
# Media drivers
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_GSPCA=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_GL860=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

#
# Analog TV USB devices
#
# CONFIG_VIDEO_GO7007 is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_STK1160=m

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m

#
# Digital TV USB devices
#
# CONFIG_DVB_AS102 is not set
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
# CONFIG_DVB_USB_DVBSKY is not set
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not set
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_VP7045=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m

#
# Software defined radio USB devices
#
# CONFIG_USB_AIRSPY is not set
# CONFIG_USB_HACKRF is not set
# CONFIG_USB_MSI2500 is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set
CONFIG_VIDEO_ZORAN=m
# CONFIG_VIDEO_ZORAN_DC30 is not set
# CONFIG_VIDEO_ZORAN_ZR36060 is not set

#
# Media capture/analog TV support
#
# CONFIG_VIDEO_DT3155 is not set
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_DM1105=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
# CONFIG_DVB_NETUP_UNIDVB is not set
CONFIG_DVB_NGENE=m
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
# CONFIG_DVB_SMIPCIE is not set
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_RADIO_ADAPTERS=m
CONFIG_RADIO_MAXIRADIO=m
# CONFIG_RADIO_SAA7706H is not set
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
# CONFIG_RADIO_SI4713 is not set
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_USB_DSBR=m
CONFIG_USB_KEENE=m
CONFIG_USB_MA901=m
CONFIG_USB_MR800=m
CONFIG_USB_RAREMONO=m
CONFIG_RADIO_SI470X=m
CONFIG_USB_SI470X=m
# CONFIG_I2C_SI470X is not set
CONFIG_MEDIA_PLATFORM_DRIVERS=y
CONFIG_V4L_PLATFORM_DRIVERS=y
# CONFIG_SDR_PLATFORM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_MUX is not set

#
# Allegro DVT media platform drivers
#

#
# Amlogic media platform drivers
#

#
# Amphion drivers
#

#
# Aspeed media platform drivers
#

#
# Atmel media platform drivers
#

#
# Cadence media platform drivers
#
# CONFIG_VIDEO_CADENCE_CSI2RX is not set
# CONFIG_VIDEO_CADENCE_CSI2TX is not set

#
# Chips&Media media platform drivers
#

#
# Intel media platform drivers
#

#
# Marvell media platform drivers
#
CONFIG_VIDEO_CAFE_CCIC=m

#
# Mediatek media platform drivers
#

#
# Microchip Technology, Inc. media platform drivers #

#
# NVidia media platform drivers
#

#
# NXP media platform drivers
#

#
# Qualcomm media platform drivers
#

#
# Renesas media platform drivers
#

#
# Rockchip media platform drivers
#

#
# Samsung media platform drivers
#

#
# STMicroelectronics media platform drivers
#

#
# Sunxi media platform drivers
#

#
# Texas Instruments drivers
#

#
# Verisilicon media platform drivers
#

#
# VIA media platform drivers
#

#
# Xilinx media platform drivers
#
# CONFIG_VIDEO_XILINX is not set

#
# MMC/SDIO DVB adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIM2M is not set
# CONFIG_VIDEO_VICODEC is not set
# CONFIG_VIDEO_VIMC is not set
# CONFIG_VIDEO_VIVID is not set
# CONFIG_VIDEO_VISL is not set
# CONFIG_DVB_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#

# common driver options
#
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_TTPCI_EEPROM=m
CONFIG_UVC_COMMON=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers' #
CONFIG_VIDEO_IR_I2C=m

#
# Camera sensor devices
#
# CONFIG_VIDEO_AR0521 is not set
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_HI847 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX296 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX334 is not set
# CONFIG_VIDEO_IMX335 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_IMX412 is not set
# CONFIG_VIDEO_IMX415 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T112 is not set
CONFIG_VIDEO_MT9V011=m
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_OG01A1B is not set
# CONFIG_VIDEO_OV01A10 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV08D10 is not set
# CONFIG_VIDEO_OV08X40 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
CONFIG_VIDEO_OV2640=m
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV4689 is not set
# CONFIG_VIDEO_OV5640 is not set
# CONFIG_VIDEO_OV5645 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV7640 is not set
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8858 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9282 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_ST_VGXY61 is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set

# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set

# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

# end of Flash devices

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_TVAUDIO=m
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_WM8775=m

# end of Audio decoders, processors and mixers

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=m
# CONFIG_VIDEO_MAX9286 is not set
# CONFIG_VIDEO_ML86V7667 is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TC358746 is not set
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

# end of Video decoders

#
# Video encoders
#
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
# CONFIG_VIDEO_THS8200 is not set

# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set

# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_I2C is not set
CONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_ST_MIPID02 is not set
# CONFIG_VIDEO_THS7303 is not set

# end of Miscellaneous helper chips

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# CONFIG_VIDEO_GS1662 is not set

# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_XC5000=m

# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_M88DS3103=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_TDA10071=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_AF9013=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_EC100=m
CONFIG_DVB_GP8PSK_FE=m
CONFIG_DVB_L64781=m
CONFIG_DVB_MT352=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_SI2168=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_TDA1004X=m
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_CXD2880 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_STV0297=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_VES1820=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_MXL692=m
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
CONFIG_DVB_S921=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends #
# CONFIG_DVB_MN88443X is not set CONFIG_DVB_TC90522=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_A8293=m
CONFIG_DVB_AF9033=m
# CONFIG_DVB_ASCOT2E is not set
CONFIG_DVB_ATBM8830=m
# CONFIG_DVB_HELENE is not set
# CONFIG_DVB_HORUS3A is not set
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_IX2505V=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_DRX39XYJ=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set

# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y CONFIG_VIDEO_CMDLINE=y CONFIG_VIDEO_NOMODESET=y
CONFIG_AGP=y
CONFIG_AGP_UNINORTH=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_DISPLAY_HELPER=m CONFIG_DRM_DISPLAY_DP_HELPER=y CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m CONFIG_DRM_TTM_HELPER=m CONFIG_DRM_GEM_SHMEM_HELPER=m CONFIG_DRM_SUBALLOC_HELPER=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set

# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_KOMEDA is not set

# end of ARM devices

CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_NOUVEAU_DEBUG_MMU is not set
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_QXL=m
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
# CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
# CONFIG_DRM_PANEL_LG_LG4573 is not set
# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set # CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set # CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set # CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set # CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set # CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set # CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
# CONFIG_DRM_PANEL_TPO_TPG110 is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set

# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set # CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SAMSUNG_DSIM is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set

# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m

#
# Frame buffer Devices
#
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IO_HELPERS=y
CONFIG_FB_SYS_HELPERS=y
CONFIG_FB_SYS_HELPERS_DEFERRED=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
CONFIG_FB_IBM_GXT4500=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_LIME is not set
CONFIG_FB_MB862XX_I2C=y
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set

# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# CONFIG_BACKLIGHT_LED is not set

# end of Backlight & LCD device support

CONFIG_VGASTATE=m
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set

# end of Console display driver support

# CONFIG_LOGO is not set

# end of Graphics support

# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
# CONFIG_SND_SEQ_UMP is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_PCMTEST is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m

#
# HD-Audio
#
CONFIG_SND_HDA=m CONFIG_SND_HDA_GENERIC_LEDS=y CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=1 CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_ANALOG=m CONFIG_SND_HDA_CODEC_SIGMATEL=m CONFIG_SND_HDA_CODEC_VIA=m CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_HDA_CODEC_CIRRUS=m
# CONFIG_SND_HDA_CODEC_CS8409 is not set CONFIG_SND_HDA_CODEC_CONEXANT=m CONFIG_SND_HDA_CODEC_CA0110=m CONFIG_SND_HDA_CODEC_CA0132=m CONFIG_SND_HDA_CODEC_CA0132_DSP=y CONFIG_SND_HDA_CODEC_CMEDIA=m CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set # CONFIG_SND_HDA_CTL_DEV_ID is not set

# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_PPC=y
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_AUDIO_MIDI_V2 is not set
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
CONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
# CONFIG_HID_EVISION is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=m
# CONFIG_HID_NVIDIA_SHIELD is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set

# end of Special HID drivers

#
# HID-BPF support
#

# end of HID-BPF support

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

# end of USB HID Boot Protocol drivers
# end of USB HID support

# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
CONFIG_USB_CHAOSKEY=m
# CONFIG_USB_ONBOARD_HUB is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set

# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_PWRSEQ_EMMC=m
# CONFIG_PWRSEQ_SD8787 is not set
CONFIG_PWRSEQ_SIMPLE=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=256
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
CONFIG_SCSI_UFSHCD=m
# CONFIG_SCSI_UFS_BSG is not set
# CONFIG_SCSI_UFS_HPB is not set
# CONFIG_SCSI_UFS_HWMON is not set
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_CR0014114 is not set
# CONFIG_LEDS_EL15203000 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_BD2606MVV is not set
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_SPI_BYTE is not set
# CONFIG_LEDS_LM3697 is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m

# end of Speakup console speech

CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=m
# CONFIG_INFINIBAND_VMWARE_PVRDMA is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_ISERT=m
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

1,869 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#9 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 135 lines · Paul E. McKenney
Quoted 106 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 7 lines · Geert Uytterhoeven

Hi Liam,

Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 12 lines
Quoted 4 lines
Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 7 lines
     clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
     sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
     /soc/timer@e803b000: used for clocksource
     /soc/timer@e803c000: used for clock events
    +------------[ cut here ]------------
    +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
    +Interrupts were enabled early

Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc.

Quoted 1 line
    +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237

I cannot find commit id 99b80d6b92b5.

Quoted 12 lines

+Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Quoted 1 line

Reverting this commit fixes the issue.

I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue?

It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is as follows:

qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot"

(quoted diff) +0 -2
-prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048
-hda powerpc32.img -nographic -kernel <file>
Quoted 5 lines

RCU-related configs:

Quoted 13 lines
    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

Quoted 3 lines

CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options).

Thanks, I'll add it to my list of work.

Quoted 6 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

Do you have a clue?

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

Quoted 8 lines

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

If so, the answer is "no" (and yes, there might be a bug, but then again I just double-checked). However, if interrupts are enabled across a call_rcu() invocation, it will do some additional work to encourage the grace period. Even if interrupts are disabled across a call_rcu() invocation, it will still do either a raise_softirq() or a wakeup, depending on configuration, to encourage the grace period. And in the case of call_rcu() from an interrupt handler, that raise_softirq() could result in the RCU_SOFTIRQ handler running upon return from that interrupt, and if there are a great many callbacks ready to invoke, this RCU_SOFTIRQ handler might take quite some time. Plus that handler could itself be interrupted.

Quoted 8 lines

If long-running RCU_SOFTIRQ handlers are a problem, you can boot with rcutree.use_softirq=0, which puts that handler into a kthread, which in turn give the scheduler more control. However, this will also turn a lightweight raise_softirq() into a rather heavier weight wakeup. Choose wisely! ;-)

Or am I missing your point?

This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled.

I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling?

Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request?

Thanks,
Liam

maintainer
#10 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 144 lines · Liam R. Howlett
Quoted 135 lines · Paul E. McKenney
Quoted 106 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 7 lines · Geert Uytterhoeven

Hi Liam,

Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 12 lines
Quoted 4 lines
Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 7 lines
     clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
     sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
     /soc/timer@e803b000: used for clocksource
     /soc/timer@e803c000: used for clock events
    +------------[ cut here ]------------
    +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
    +Interrupts were enabled early

Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc.

Quoted 1 line
    +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237

I cannot find commit id 99b80d6b92b5.

Quoted 12 lines

+Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Quoted 1 line

Reverting this commit fixes the issue.

I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue?

It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf). My qemu command is as follows:

qemu-system-ppc -L pc-bios -boot c -prom-env "boot-device=hd:,\yaboot"

(quoted diff) +0 -2
-prom-env "boot-args=conf=hd:,\yaboot.conf" -M mac99,via=pmu -m 2048
-hda powerpc32.img -nographic -kernel <file>
Quoted 5 lines

RCU-related configs:

Quoted 13 lines
    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

Quoted 3 lines

CONFIG_MAPLE_RCU_DISABLED is not defined (and should BTW be renamed, as CONFIG_* is reserved for kernel configuration options).

Thanks, I'll add it to my list of work.

Quoted 6 lines

I do not see this issue on any other platform (arm/arm64/risc-v/mips/sh/m68k), several of them use the same RCU configuration.

Do you have a clue?

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

Quoted 8 lines

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

If so, the answer is "no" (and yes, there might be a bug, but then again I just double-checked). However, if interrupts are enabled across a call_rcu() invocation, it will do some additional work to encourage the grace period. Even if interrupts are disabled across a call_rcu() invocation, it will still do either a raise_softirq() or a wakeup, depending on configuration, to encourage the grace period. And in the case of call_rcu() from an interrupt handler, that raise_softirq() could result in the RCU_SOFTIRQ handler running upon return from that interrupt, and if there are a great many callbacks ready to invoke, this RCU_SOFTIRQ handler might take quite some time. Plus that handler could itself be interrupted.

Quoted 7 lines

If long-running RCU_SOFTIRQ handlers are a problem, you can boot with rcutree.use_softirq=0, which puts that handler into a kthread, which in turn give the scheduler more control. However, this will also turn a lightweight raise_softirq() into a rather heavier weight wakeup. Choose wisely! ;-)

Or am I missing your point?

Quoted 7 lines

This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled.

I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling?

You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU callback invocations won't happen until some time after the scheduler starts up.

Quoted 3 lines

Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request?

During boot before interrupts are enabled, RCU has not yet spawned any of its kthreads. Therefore, all of its attempts to do wakeups would notice a NULL task_struct pointer and refrain from actually doing the wakeup. If it did do the wakeup, you would see a NULL-pointer exception. See for example, invoke_rcu_core_kthread(), though that won't happen unless you booted with rcutree.use_softirq=0.

Besides, since when did doing a wakeup enable interrupts? That would make it hard to do wakeups from hardware interrupt handlers, not?

But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas of greatest suspicion, starting from the stack trace generated by that mutex_lock()? A stray interrupt-enable could be pretty much anywhere.

But where are those call_rcu() invocations? Before rcu_init()? Presumably before init is spawned and the early_init() calls.

And what is the RCU-related Kconfig and boot-parameter setup?

Thanx, Paul

#11 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 19 lines · Paul E. McKenney
Quoted 18 lines · Liam R. Howlett
Quoted 17 lines · Paul E. McKenney
Quoted 16 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 7 lines · Geert Uytterhoeven

Hi Liam,

Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line

...

Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 15 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y
    # CONFIG_RCU_EXPERT is not set
    CONFIG_TINY_SRCU=y
    # end of RCU Subsystem
    # RCU Debugging
    # CONFIG_RCU_SCALE_TEST is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_RCU_REF_SCALE_TEST is not set
    # CONFIG_RCU_TRACE is not set
    # CONFIG_RCU_EQS_DEBUG is not set
    # end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

...

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 12 lines

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

I am not.

...

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

Or am I missing your point?

This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled.

Quoted 7 lines
Quoted 3 lines

I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling?

You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU callback invocations won't happen until some time after the scheduler starts up.

I am not, it's just a detection of IRQs being enabled early.

Quoted 12 lines
Quoted 4 lines

Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request?

During boot before interrupts are enabled, RCU has not yet spawned any of its kthreads. Therefore, all of its attempts to do wakeups would notice a NULL task_struct pointer and refrain from actually doing the wakeup. If it did do the wakeup, you would see a NULL-pointer exception. See for example, invoke_rcu_core_kthread(), though that won't happen unless you booted with rcutree.use_softirq=0.

Quoted 2 lines

Besides, since when did doing a wakeup enable interrupts? That would make it hard to do wakeups from hardware interrupt handlers, not?

Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched().

From what Michael said [1] in this thread, since something has already set TIF_NEED_RESCHED, it will eventually enable interrupts on us.

I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs:

		/* force scheduling for rcu_qs() */                                                                     
                resched_cpu(0);

the task is set idle in sched_init() -> init_idle() and never changed, afaict.

Removing the RCU option from the maple tree in kernel/irq/irqdesc.c fixes the issue by avoiding the maple tree running call_rcu(). I am not sure on the locking of the tree so I feel this change may cause other issues...also it's before lockdep_init(), so any issue I introduce may not be detected.

When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the same thing, but the IRQs are not enabled on return. So, resched_cpu(0) is called, but the IRQs warning of enabled isn't triggered. I failed to find a reason why.

I am not entirely sure what makes ppc32 different than other platforms in that the initial task is configured to an idle task and the first call to call_rcu (tiny!) would cause the observed behaviour.

Non-tiny rcu calls (as I am sure you know, but others may not) kernel/rcu/tree.c which in turn calls __call_rcu_common(). That function is far more complex than the tiny version. Maybe it's part of why we see different behaviour based on platforms? I don't see an idle check in that version of call_rcu().

Or maybe PPC32 has something set incorrectly to cause this failure in early boot and I've just found something that needs to be set differently?

Quoted 6 lines

But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas of greatest suspicion, starting from the stack trace generated by that mutex_lock()? A stray interrupt-enable could be pretty much anywhere.

But where are those call_rcu() invocations? Before rcu_init()?

During init_IRQ(), which is after rcu_init() but before rcu_init_nohz(), srcu_init(), and softirq_init() in init/main.c start_kernel().

Quoted 3 lines

Presumably before init is spawned and the early_init() calls.

And what is the RCU-related Kconfig and boot-parameter setup?

The .config was attached to the email I sent, and it matches what was quoted above in the "RCU-related configs" section.

[1] https://lore.kernel.org/linux-mm/[email protected]/

maintainer
#12 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

For more detail, please read on!

Quoted 78 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 10 lines

# CONFIG_RCU_EXPERT is not set
CONFIG_TINY_SRCU=y
# end of RCU Subsystem
# RCU Debugging
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

...

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 12 lines

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

I am not.

...

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

Or am I missing your point?

This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled.

Quoted 7 lines
Quoted 3 lines

I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling?

You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU callback invocations won't happen until some time after the scheduler starts up.

I am not, it's just a detection of IRQs being enabled early.

Quoted 12 lines
Quoted 4 lines

Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request?

During boot before interrupts are enabled, RCU has not yet spawned any of its kthreads. Therefore, all of its attempts to do wakeups would notice a NULL task_struct pointer and refrain from actually doing the wakeup. If it did do the wakeup, you would see a NULL-pointer exception. See for example, invoke_rcu_core_kthread(), though that won't happen unless you booted with rcutree.use_softirq=0.

Quoted 2 lines

Besides, since when did doing a wakeup enable interrupts? That would make it hard to do wakeups from hardware interrupt handlers, not?

Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched().

Quoted 1 line

From what Michael said [1] in this thread, since something has already

set TIF_NEED_RESCHED, it will eventually enable interrupts on us.

Quoted 7 lines

I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs:

		/* force scheduling for rcu_qs() */                                                                     
                resched_cpu(0);

the task is set idle in sched_init() -> init_idle() and never changed, afaict.

Yes, because RCU eventually needs a context switch in order to make a grace period happen. And Maple Tree isn't the only thing invoking call_rcu() early, so this has been in place for a very long time.

Quoted 10 lines

Removing the RCU option from the maple tree in kernel/irq/irqdesc.c fixes the issue by avoiding the maple tree running call_rcu(). I am not sure on the locking of the tree so I feel this change may cause other issues...also it's before lockdep_init(), so any issue I introduce may not be detected.

When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the same thing, but the IRQs are not enabled on return. So, resched_cpu(0) is called, but the IRQs warning of enabled isn't triggered. I failed to find a reason why.

Here you mean IRQs being enabled upon return from __setup_irq(), correct?

But yes, __setup_irq() does call mutex_lock(). Which will call preempt_schedule_common() via might_sleep() and __cond_resched(), even though that is clearly a very bad thing this early. And let's face it, the whole purpose of mutex_lock() is to block when needed. And a big purpose of that might_sleep() is to yell at people invoking this with interrupts disabled.

And most of the wrappers around __setup_irq() look to be intended for much later, after interrupts have been enabled. One exception is setup_percpu_irq(), which says that it is for "the early boot process", whenever that might be. But this is only invoked from mips in v6.5.

The __request_percpu_irq() function is wrappered by request_percpu_irq(), and its header comment suggests that it is to be called after there are multiple CPUs. I am not seeing a call that is obviously from ppc32, but there are a number of drivers using this with which I am unfamiliar.

The request_percpu_nmi() has to be followed up on each CPU using prepare_percpu_nmi() and enable_percpu_nmi(), so it is not clear that it is useful to invoke this before interrupts are enabled. But this is used by ARM, not ppc32 from what I can see.

So even though I am not seeing how ppc32 invokes __setup_irq() early, your testing clearly indicates that it is doing so.

Quoted 3 lines

I am not entirely sure what makes ppc32 different than other platforms in that the initial task is configured to an idle task and the first call to call_rcu (tiny!) would cause the observed behaviour.

Maybe something like this in __setup_irq(), right before the mutex_lock()?

	WARN_ON_ONCE(irqs_disabled());

This will dump the stack trace showing how __setup_irq() is being invoked in early boot on ppc32.

Again, given that __setup_irq() invokes mutex_lock(), invoking this function in its current form before interrupts have been enabled is a bad idea.

Quoted 5 lines

Non-tiny rcu calls (as I am sure you know, but others may not) kernel/rcu/tree.c which in turn calls __call_rcu_common(). That function is far more complex than the tiny version. Maybe it's part of why we see different behaviour based on platforms? I don't see an idle check in that version of call_rcu().

Tree RCU can rely on the grace-period kthread starting up later in boot. This kthread will handle any need for a grace period from early boot invocation of call_rcu(). Tiny RCU does not have such a kthread, hence the resched_cpu(). Which is fine, as long as nothing (incorrectly!) invokes a blocking operation before the scheduler has been initialized.

Quoted 3 lines

Or maybe PPC32 has something set incorrectly to cause this failure in early boot and I've just found something that needs to be set differently?

This might be a failure of imagination on my part, but I certainly don't see why ppc32 should expect to get away with invoking __setup_irq() anywhere near that early! ;-)

But if ppc32 cannot be adjusted so as to invoke __setup_irq() later, the following change to __setup_irq() might work:

	if (!mutex_trylock(&desc->request_mutex))
		mutex_lock(&desc->request_mutex);

The reason for "might" rather than "will" is that __setup_irq() might well have other dependencies on the scheduler being up and running.

It would be cleaner for that ppc32 call to __setup_irq() to be moved later, after the scheduler is up and running.

Quoted 8 lines
Quoted 5 lines

But why not put some WARN_ON_ONCE(!irqs_disabled()) calls in the areas of greatest suspicion, starting from the stack trace generated by that mutex_lock()? A stray interrupt-enable could be pretty much anywhere.

But where are those call_rcu() invocations? Before rcu_init()?

During init_IRQ(), which is after rcu_init() but before rcu_init_nohz(), srcu_init(), and softirq_init() in init/main.c start_kernel().

That is a perfectly legal time and place for a call_rcu() invocation. It is also legal before rcu_init(), but it has to be late enough that things like per-CPU variables are accessible. Which is still very early.

Quoted 8 lines
Quoted 3 lines

Presumably before init is spawned and the early_init() calls.

And what is the RCU-related Kconfig and boot-parameter setup?

The .config was attached to the email I sent, and it matches what was quoted above in the "RCU-related configs" section.

[1] https://lore.kernel.org/linux-mm/[email protected]/

Again, apologies for having misread that .config snippet!!!

Thanx, Paul

#13 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Paul,

Quoted 44 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

Quoted 7 lines

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

Thanks!

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
maintainer
#14 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 50 lines · Geert Uytterhoeven

Hi Paul,

Quoted 47 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

Quoted 6 lines
Quoted 4 lines

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

Thanx, Paul

Quoted 12 lines

Thanks!

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#15 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 53 lines · Geert Uytterhoeven
Quoted 51 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

Quoted 8 lines
Quoted 1 line

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thanks!

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
maintainer
#16 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 59 lines · Geert Uytterhoeven

Hi Paul,

Quoted 56 lines · Paul E. McKenney
Quoted 54 lines · Geert Uytterhoeven
Quoted 44 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

Quoted 7 lines

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Quoted 8 lines
Quoted 6 lines

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Thanx, Paul

#17 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 58 lines · Paul E. McKenney
Quoted 57 lines · Geert Uytterhoeven

Hi Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 53 lines · Geert Uytterhoeven
Quoted 51 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

I also looked into the mtmsr register but decided to consult you lot about my findings in hopes that someone with more knowledge of the platform or early boot would alleviate the pain so that I could context switch or sleep :) I mean, an mtmsr bug seems like a leap even for the issues I create..

Regards,
Liam

#18 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 45 lines · Liam R. Howlett
Quoted 44 lines · Paul E. McKenney
Quoted 43 lines · Geert Uytterhoeven

Hi Paul,

Quoted 40 lines · Paul E. McKenney
Quoted 39 lines · Geert Uytterhoeven
Quoted 38 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

This changes where the interrupts become enabled, but doesn't stop it from happening. It still throws a WARN after init_IRQ(). I suspect it is not the way to proceed as there are probably many places that will need to be changed in both common and arch specific code. As soon as TIF_NEED_RESCHED is set, then all the checks will need to be altered.

I think we either need to set the boot thread to !idle, avoid call_rcu() to set TIF_NEED_RESCHED (how was this working before? Do we need rcu for the IRQs?), or alter the boot order (note this is NOT arch or platform code here).

I don't like any of these. I'd like another option, please?

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Oh, and also:
arch/powerpc/platforms/powermac/setup.c: .init_IRQ = pmac_pic_init,

Quoted 73 lines

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

I also looked into the mtmsr register but decided to consult you lot about my findings in hopes that someone with more knowledge of the platform or early boot would alleviate the pain so that I could context switch or sleep :) I mean, an mtmsr bug seems like a leap even for the issues I create..

Regards,
Liam

Signature · 3 lines
maple-tree mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/maple-tree
maintainer
#19 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 52 lines · Liam R. Howlett
Quoted 51 lines · Liam R. Howlett
Quoted 50 lines · Paul E. McKenney
Quoted 49 lines · Geert Uytterhoeven

Hi Paul,

Quoted 46 lines · Paul E. McKenney
Quoted 45 lines · Geert Uytterhoeven
Quoted 44 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

$ grep RCU .config
# RCU Subsystem
CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()

        instead be as follows:

        if (!mutex_trylock(&desc->request_mutex))
                mutex_lock(&desc->request_mutex);
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

This changes where the interrupts become enabled, but doesn't stop it from happening. It still throws a WARN after init_IRQ(). I suspect it is not the way to proceed as there are probably many places that will need to be changed in both common and arch specific code. As soon as TIF_NEED_RESCHED is set, then all the checks will need to be altered.

Thank you for trying it!

Quoted 6 lines

I think we either need to set the boot thread to !idle, avoid call_rcu() to set TIF_NEED_RESCHED (how was this working before? Do we need rcu for the IRQs?), or alter the boot order (note this is NOT arch or platform code here).

I don't like any of these. I'd like another option, please?

My favorite is to move the interrupt enabling later, but Michael Ellerman would know better than would I about the feasibility of this.

Thanx, Paul

Quoted 88 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 7 lines
Quoted 5 lines

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Oh, and also:
arch/powerpc/platforms/powermac/setup.c: .init_IRQ = pmac_pic_init,

Quoted 73 lines

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

I also looked into the mtmsr register but decided to consult you lot about my findings in hopes that someone with more knowledge of the platform or early boot would alleviate the pain so that I could context switch or sleep :) I mean, an mtmsr bug seems like a leap even for the issues I create..

Regards,
Liam

Signature · 3 lines
maple-tree mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/maple-tree
#20 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Le 12/09/2023 à 17:08, Paul E. McKenney a écrit :

Quoted 69 lines · Liam R. Howlett
Quoted 52 lines · Liam R. Howlett
Quoted 51 lines · Paul E. McKenney
Quoted 50 lines · Geert Uytterhoeven
Quoted 49 lines

Hi Paul,

Quoted 46 lines · Paul E. McKenney
Quoted 45 lines · Geert Uytterhoeven
Quoted 44 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to
get a working PPC32 test environment.

* Geert Uytterhoeven <[email protected]> [230829 12:42]:
Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

On Fri, 18 Aug 2023, Liam R. Howlett wrote:
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

$ grep RCU .config
# RCU Subsystem
CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()

         instead be as follows:

         if (!mutex_trylock(&desc->request_mutex))
                 mutex_lock(&desc->request_mutex);
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

This changes where the interrupts become enabled, but doesn't stop it from happening. It still throws a WARN after init_IRQ(). I suspect it is not the way to proceed as there are probably many places that will need to be changed in both common and arch specific code. As soon as TIF_NEED_RESCHED is set, then all the checks will need to be altered.

Thank you for trying it!

Quoted 5 lines

I think we either need to set the boot thread to !idle, avoid call_rcu() to set TIF_NEED_RESCHED (how was this working before? Do we need rcu for the IRQs?), or alter the boot order (note this is NOT arch or platform code here).

Quoted 5 lines
Quoted 1 line

I don't like any of these. I'd like another option, please?

My favorite is to move the interrupt enabling later, but Michael Ellerman would know better than would I about the feasibility of this.

I digged into it a bit more, looks like IRQs get enabled by the call to cond_resched() in the loop in vm_area_alloc_pages(), which is called from powerpc's init_IRQ() fonction when allocating IRQ stacks.

And IRQ stacks definitely need to be enabled before IRQs get enabled, so there's something wrong here isn't it ?

Christophe

#21 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 74 lines · Christophe Leroy

Le 12/09/2023 à 17:08, Paul E. McKenney a écrit :

Quoted 71 lines · Liam R. Howlett
Quoted 52 lines · Liam R. Howlett
Quoted 51 lines · Paul E. McKenney
Quoted 50 lines · Geert Uytterhoeven
Quoted 49 lines

Hi Paul,

Quoted 46 lines · Paul E. McKenney
Quoted 45 lines · Geert Uytterhoeven
Quoted 44 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney

On Wed, Sep 06, 2023 at 11:23:25AM -0400, Liam R. Howlett wrote:
(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to
get a working PPC32 test environment.

* Geert Uytterhoeven <[email protected]> [230829 12:42]:
Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

On Fri, 18 Aug 2023, Liam R. Howlett wrote:
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

$ grep RCU .config
# RCU Subsystem
CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()

         instead be as follows:

         if (!mutex_trylock(&desc->request_mutex))
                 mutex_lock(&desc->request_mutex);
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

This changes where the interrupts become enabled, but doesn't stop it from happening. It still throws a WARN after init_IRQ(). I suspect it is not the way to proceed as there are probably many places that will need to be changed in both common and arch specific code. As soon as TIF_NEED_RESCHED is set, then all the checks will need to be altered.

Thank you for trying it!

Quoted 6 lines

I think we either need to set the boot thread to !idle, avoid call_rcu() to set TIF_NEED_RESCHED (how was this working before? Do we need rcu for the IRQs?), or alter the boot order (note this is NOT arch or platform code here).

I don't like any of these. I'd like another option, please?

Quoted 7 lines
Quoted 3 lines

My favorite is to move the interrupt enabling later, but Michael Ellerman would know better than would I about the feasibility of this.

I digged into it a bit more, looks like IRQs get enabled by the call to cond_resched() in the loop in vm_area_alloc_pages(), which is called from powerpc's init_IRQ() fonction when allocating IRQ stacks.

This is another location where the process will enable IRQs because TIF_NEED_RESCHED was set.

Quoted 3 lines

And IRQ stacks definitely need to be enabled before IRQs get enabled, so there's something wrong here isn't it ?

maintainer
#22 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Liam R. Howlett
Quoted 115 lines · Liam R. Howlett
Quoted 58 lines · Paul E. McKenney
Quoted 57 lines · Geert Uytterhoeven

Hi Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 53 lines · Geert Uytterhoeven
Quoted 51 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

Quoted 7 lines

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

Doing early-boot call_rcu() is OK.

The initial thread eventually becomes the idle thread for the boot CPU. See rest_init() in init/main.c.

I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() during boot, as shown in the (untested) patch below. This might result in boot-time hangs, though.

The thought of doing mutex_lock() before interrupts are enabled on the boot CPU strikes me as very wrong. Others might argue that the fact that __might_resched() explicitly avoids complaining when system_state is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. (Which might be why enabling debug suppressed the problem.) Except that if you actually try sleeping at that time, nothing good can possibly happen.

So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them?

Quoted 5 lines

I also looked into the mtmsr register but decided to consult you lot about my findings in hopes that someone with more knowledge of the platform or early boot would alleviate the pain so that I could context switch or sleep :) I mean, an mtmsr bug seems like a leap even for the issues I create..

Stranger things have happened, but I agree that this would indeed be quite strange! ;-)

Thanx, Paul

------------------------------------------------------------------------

kernel/rcu/tiny.c +1 -1
index fec804b79080..f00fb0855e4b 100644
@@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func)
 	rcu_ctrlblk.curtail = &head->next;
 	local_irq_restore(flags);
 
-	if (unlikely(is_idle_task(current))) {
+	if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) {
 		/* force scheduling for rcu_qs() */
 		resched_cpu(0);
 	}
#23 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 124 lines · Paul E. McKenney
Quoted 115 lines · Liam R. Howlett
Quoted 58 lines · Paul E. McKenney
Quoted 57 lines · Geert Uytterhoeven

Hi Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 53 lines · Geert Uytterhoeven
Quoted 51 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

$ grep RCU .config
# RCU Subsystem
CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

Quoted 7 lines

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

Quoted 8 lines

Doing early-boot call_rcu() is OK.

The initial thread eventually becomes the idle thread for the boot CPU. See rest_init() in init/main.c.

I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() during boot, as shown in the (untested) patch below. This might result in boot-time hangs, though.

If we set the current thread as !idle, then we don't need to add overhead to every call_rcu(), and you've already tracked down where I need to change the flags back to idle. Patch below.

Quoted 8 lines

The thought of doing mutex_lock() before interrupts are enabled on the boot CPU strikes me as very wrong. Others might argue that the fact that __might_resched() explicitly avoids complaining when system_state is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. (Which might be why enabling debug suppressed the problem.) Except that if you actually try sleeping at that time, nothing good can possibly happen.

Does lockdep check for SYSTEM_BOOTING as well? That could be another reason?

Quoted 3 lines

So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them?

I don't know for sure, but there are 'preallocated IRQs' which end up grouped 0-15, then I see another one added at 55 after the mpic console output. I suspect it's so that they can be added as they are discovered during early boot?

The below is not fully tested, but qemu stops throwing the warning on boot and it doesn't add instructions to call_rcu().

------------------------------------------------------------------------

init/main.c +2 -1
index dbe1fe76be34..fd4739918a94 100644
@@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void)
 	 */
 	rcu_read_lock();
 	tsk = find_task_by_pid_ns(pid, &init_pid_ns);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE;
 	set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
 	rcu_read_unlock();
 
@@ -943,6 +943,7 @@ void start_kernel(void)
 	 * time - but meanwhile we still have a functioning scheduler.
 	 */
 	sched_init();
+	current->flags &= ~PF_IDLE;
 
 	if (WARN(!irqs_disabled(),
 		 "Interrupts were enabled *very* early, fixing it\n"))
Quoted 15 lines

------------------------------------------------------------------------

kernel/rcu/tiny.c +1 -1
index fec804b79080..f00fb0855e4b 100644
@@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func)
 	rcu_ctrlblk.curtail = &head->next;
 	local_irq_restore(flags);
 
-	if (unlikely(is_idle_task(current))) {
+	if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) {
 		/* force scheduling for rcu_qs() */
 		resched_cpu(0);
 	}
maintainer
#24 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 130 lines · Liam R. Howlett
Quoted 129 lines · Paul E. McKenney
Quoted 115 lines · Liam R. Howlett
Quoted 58 lines · Paul E. McKenney
Quoted 57 lines · Geert Uytterhoeven

Hi Paul,

Quoted 54 lines · Paul E. McKenney
Quoted 53 lines · Geert Uytterhoeven
Quoted 51 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to
get a working PPC32 test environment.

* Geert Uytterhoeven <[email protected]> [230829 12:42]:
Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

On Fri, 18 Aug 2023, Liam R. Howlett wrote:
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

$ grep RCU .config
# RCU Subsystem
CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 1 line

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

I had already found that this is the mutex lock that is enabling them. I surrounded the mutex lock to ensure it was not enabled before, but was after. Here is the findings:

kernel/irq/manage.c:1587 __setup_irq:

[    0.000000] [c0e65ec0] [c00e9b00] __setup_irq+0x6c4/0x840 (unreliable)
[    0.000000] [c0e65ef0] [c00e9d74] request_threaded_irq+0xf8/0x1f4
[    0.000000] [c0e65f20] [c0c27168] pmac_pic_init+0x204/0x5f8
[    0.000000] [c0e65f80] [c0c1f544] init_IRQ+0xac/0x12c
[    0.000000] [c0e65fa0] [c0c1cad0] start_kernel+0x544/0x6d4

Note your line number will be slightly different due to my debug. This is the WARN _after_ the mutex lock.

Quoted 22 lines
Quoted 5 lines
Quoted 3 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

Yeah, I put many WARN() calls through the code as well as tracking down where TIF_NEED_RESCHED was set; the tiny.c call_rcu().

So my findings summarized:

Quoted 7 lines

1. My change to the maple tree makes call_rcu() more likely on early boot.
2. The initial thread setup is always set to idle state
3. call_rcu() tiny sets TIF_NEED_RESCHED since is_idle_task(current)
4. init_IRQ() takes a mutex lock which will enable the interrupts since TIF_NEED_RESCHED is set.

I don't know which of these things is "wrong".

Doing early-boot call_rcu() is OK.

The initial thread eventually becomes the idle thread for the boot CPU. See rest_init() in init/main.c.

Quoted 7 lines
Quoted 3 lines

I can certainly make Tiny call_rcu() refrain from invoking resched_cpu() during boot, as shown in the (untested) patch below. This might result in boot-time hangs, though.

If we set the current thread as !idle, then we don't need to add overhead to every call_rcu(), and you've already tracked down where I need to change the flags back to idle. Patch below.

I personally like your patch way better than mine, but it will need both eyes and time on it. I wouldn't put it past someone to assume that the boot CPU is running the idle thread early in boot. :-/

Quoted 10 lines
Quoted 7 lines

The thought of doing mutex_lock() before interrupts are enabled on the boot CPU strikes me as very wrong. Others might argue that the fact that __might_resched() explicitly avoids complaining when system_state is equal to SYSTEM_BOOTING constitutes evidence that such calls are OK. (Which might be why enabling debug suppressed the problem.) Except that if you actually try sleeping at that time, nothing good can possibly happen.

Does lockdep check for SYSTEM_BOOTING as well? That could be another reason?

Not from what I can see, but I could be missing something.

Quoted 7 lines
Quoted 2 lines

So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them?

I don't know for sure, but there are 'preallocated IRQs' which end up grouped 0-15, then I see another one added at 55 after the mpic console output. I suspect it's so that they can be added as they are discovered during early boot?

Christophe argues that the interrupt stacks must be allocated early on, and that this acquires a mutex.

Quoted 2 lines

The below is not fully tested, but qemu stops throwing the warning on boot and it doesn't add instructions to call_rcu().

Two points in its favor! ;-)

Thanx, Paul

Quoted 38 lines

------------------------------------------------------------------------

init/main.c +2 -1
index dbe1fe76be34..fd4739918a94 100644
@@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void)
 	 */
 	rcu_read_lock();
 	tsk = find_task_by_pid_ns(pid, &init_pid_ns);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE;
 	set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
 	rcu_read_unlock();
 
@@ -943,6 +943,7 @@ void start_kernel(void)
 	 * time - but meanwhile we still have a functioning scheduler.
 	 */
 	sched_init();
+	current->flags &= ~PF_IDLE;
 
 	if (WARN(!irqs_disabled(),
 		 "Interrupts were enabled *very* early, fixing it\n"))
Quoted 16 lines

------------------------------------------------------------------------

kernel/rcu/tiny.c +1 -1
index fec804b79080..f00fb0855e4b 100644
@@ -192,7 +192,7 @@ void call_rcu(struct rcu_head *head, rcu_callback_t func)
 	rcu_ctrlblk.curtail = &head->next;
 	local_irq_restore(flags);
 
-	if (unlikely(is_idle_task(current))) {
+	if (unlikely(is_idle_task(current)) && system_state > SYSTEM_BOOTING) {
 		/* force scheduling for rcu_qs() */
 		resched_cpu(0);
 	}
#25 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Le 12/09/2023 à 18:49, Paul E. McKenney a écrit :

Quoted 12 lines · Liam R. Howlett
Quoted 7 lines
Quoted 2 lines

So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them?

I don't know for sure, but there are 'preallocated IRQs' which end up grouped 0-15, then I see another one added at 55 after the mpic console output. I suspect it's so that they can be added as they are discovered during early boot?

Christophe argues that the interrupt stacks must be allocated early on, and that this acquires a mutex.

Well, we can probably allocate them later than it is today.

In commit 547db12fd8a0 ("powerpc/32: Use vmapped stacks for interrupts") I already pushed the allocation at a later stage than it initialy was.

We can probably do it later if it helps, however it definitely needs to be done before enabling IRQs for obvious reasons, so it is a problem that alloc_vm_stack() calling __vmalloc_node() enables IRQs.

Christophe

#26 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Le 12/09/2023 à 19:02, Christophe Leroy a écrit :

Quoted 16 lines

Le 12/09/2023 à 18:49, Paul E. McKenney a écrit :

Quoted 12 lines · Liam R. Howlett
Quoted 7 lines
Quoted 2 lines

So my question is why is it useful to setup interrupts that early, given that interrupts cannot possibly happen until the boot CPU enables them?

I don't know for sure, but there are 'preallocated IRQs' which end up grouped 0-15, then I see another one added at 55 after the mpic console output. I suspect it's so that they can be added as they are discovered during early boot?

Christophe argues that the interrupt stacks must be allocated early on, and that this acquires a mutex.

Quoted 8 lines

Well, we can probably allocate them later than it is today.

In commit 547db12fd8a0 ("powerpc/32: Use vmapped stacks for interrupts") I already pushed the allocation at a later stage than it initialy was.

We can probably do it later if it helps, however it definitely needs to be done before enabling IRQs for obvious reasons, so it is a problem that alloc_vm_stack() calling __vmalloc_node() enables IRQs.

For FWIW, looks like arm32 is doing similar so the problem is likely to happen for them too. For that both CONFIG_IRQSTACKS and CONFIG_VMAP_STACK must be set it seems.

Christophe

#27 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Liam R. Howlett

Le 12/09/2023 à 17:44, Liam R. Howlett a écrit :

init/main.c noinline void __ref __noreturn rest_init(void) · line 699

Quoted 10 lines
init/main.c +1 -1
index dbe1fe76be34..fd4739918a94 100644
@@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void)
  	 */
  	rcu_read_lock();
  	tsk = find_task_by_pid_ns(pid, &init_pid_ns);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE;

Is it really what you want to do ?

PF_NO_SETAFFINITY is 0x04000000 and PF_IDLE is 0x00000002 so

PF_NO_SETAFFINITY & PF_IDLE is 0

Didn't you mean to do PF_NO_SETAFFINITY | PF_IDLE ?

Regardless, with either change I don't get the warning anymore.

Quoted 12 lines
init/main.c +1 -0
  	set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
  	rcu_read_unlock();
 
@@ -943,6 +943,7 @@ void start_kernel(void)
  	 * time - but meanwhile we still have a functioning scheduler.
  	 */
  	sched_init();
+	current->flags &= ~PF_IDLE;
 
  	if (WARN(!irqs_disabled(),
  		 "Interrupts were enabled *very* early, fixing it\n"))
#28 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 16 lines · Christophe Leroy

Le 12/09/2023 à 17:44, Liam R. Howlett a écrit :

init/main.c noinline void __ref __noreturn rest_init(void) · line 699

Quoted 10 lines
init/main.c +1 -1
index dbe1fe76be34..fd4739918a94 100644
@@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void)
  	 */
  	rcu_read_lock();
  	tsk = find_task_by_pid_ns(pid, &init_pid_ns);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	tsk->flags |= PF_NO_SETAFFINITY & PF_IDLE;

Is it really what you want to do ?

Quoted 6 lines

PF_NO_SETAFFINITY is 0x04000000 and PF_IDLE is 0x00000002 so

PF_NO_SETAFFINITY & PF_IDLE is 0

Didn't you mean to do PF_NO_SETAFFINITY | PF_IDLE ?

Yes, certainly.

Quoted 3 lines

Regardless, with either change I don't get the warning anymore.

I don't have it fully tested but we avoid getting the call_rcu() setting the TIF_... flag by avoiding the task having PF_IDLE set in the flags. I'm not entirely sure if I have added the set/clear in the best locations either.

The largest concern I have is that this could potentially change arch or platfrom code if anything depends on this being idle.

Quoted 15 lines
Quoted 15 lines
init/main.c +1 -0
  	set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
  	rcu_read_unlock();
 
@@ -943,6 +943,7 @@ void start_kernel(void)
  	 * time - but meanwhile we still have a functioning scheduler.
  	 */
  	sched_init();
+	current->flags &= ~PF_IDLE;
 
  	if (WARN(!irqs_disabled(),
  		 "Interrupts were enabled *very* early, fixing it\n"))
#29 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Paul E. McKenney

Hi Paul,

Quoted 62 lines · Paul E. McKenney
Quoted 61 lines · Geert Uytterhoeven
Quoted 60 lines · Paul E. McKenney
Quoted 48 lines · Geert Uytterhoeven
Quoted 47 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

Quoted 6 lines
Quoted 4 lines

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

On a typical arm32 system with global or architectured timer, I get:

WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xcc/0x6d0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.6.0-rc1-shmobile-02354-g24e058b77f5a #1655
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x40/0x4c
 dump_stack_lvl from __warn+0x78/0x10c
 __warn from warn_slowpath_fmt+0x90/0x11c
 warn_slowpath_fmt from __setup_irq+0xcc/0x6d0
 __setup_irq from __request_percpu_irq+0xb8/0xd0
 __request_percpu_irq from set_smp_ipi_range+0x88/0xdc
 set_smp_ipi_range from gic_of_init+0x1a4/0x4d8
 gic_of_init from of_irq_init+0x1f0/0x320
 of_irq_init from init_IRQ+0x74/0x104
 init_IRQ from start_kernel+0x360/0x5d0
 start_kernel from 0x0

Likewise on arm64 with architectured timer. But on these systems I do not see the issue I reported.

On RISC-V:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0x4e6/0x5ee
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-02355-g63165363c6a3 #63
Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
epc : __setup_irq+0x4e6/0x5ee
 ra : __setup_irq+0x38/0x5ee

epc : ffffffff80049472 ra : ffffffff80048fc4 sp : ffffffff81203cd0
gp : ffffffff812ee760 tp : ffffffff8120d5c0 t0 : ffffffd801854300 t1 : 0000000000000000 t2 : ffffffff81000ad8 s0 : ffffffff81203d20 s1 : ffffffd801855000 a0 : 0000000000000001 a1 : ffffffd801855000 a2 : ffffffd801854280 a3 : 0000000000000001 a4 : 0000000000000000 a5 : 0000000000000000 a6 : ffffffd801852108 a7 : ffffffd801852100 s2 : ffffffd801854280 s3 : 0000000000000005 s4 : ffffffff812c54c0 s5 : 0000000000000005 s6 : ffffffff80dd83a0 s7 : ffffffff805c0cc0 s8 : ffffffd801855018 s9 : 0000000000000000 s10: 0000000000000000
s11: 000000007bf638a0 t3 : 0000000000000000 t4 : 0000000000000002 t5 : ffffffff812882a0 t6 : 0000000000000001
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003

[<ffffffff80049472>] __setup_irq+0x4e6/0x5ee
[<ffffffff800497a8>] __request_percpu_irq+0x98/0xcc
[<ffffffff8082501e>] riscv_timer_init_dt+0x186/0x22e
[<ffffffff80824b62>] timer_probe+0x62/0xd2
[<ffffffff80803c36>] time_init+0x86/0xa6
[<ffffffff80800ae2>] start_kernel+0x436/0x618
---[ end trace 0000000000000000 ]---

Also, no issue here.

On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did not trigger, until I applied Liam's patch ("init/main: Clear boot task idle flag"), which got rid of the "Interrupts were enabled early" warning, and now tells me, as expected:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xc8/0x654
CPU: 0 PID: 0 Comm: swapper Not tainted
6.6.0-rc1-rskrza1-02357-g237e09fd64b8-dirty #829
Hardware name: Generic R7S72100 (Flattened Device Tree)
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x24/0x3c
 dump_stack_lvl from __warn+0x74/0xb8
 __warn from warn_slowpath_fmt+0x78/0xb0
 warn_slowpath_fmt from __setup_irq+0xc8/0x654
 __setup_irq from request_threaded_irq+0xac/0x13c
 request_threaded_irq from timer_of_init+0x238/0x2c8
 timer_of_init from ostm_init+0x98/0x208
 ostm_init from timer_probe+0x90/0xe4
 timer_probe from start_kernel+0x2c0/0x488
 start_kernel from 0x0
---[ end trace 0000000000000000 ]---

However, Liam's patch causes lots of warnings on the other systems...

Quoted 14 lines
Quoted 11 lines
Quoted 8 lines
Quoted 6 lines

Note that there are (possibly different) issues seen on ppc32 and on arm32 (Renesas RZ/A in particular, but not on other Renesas ARM systems).

I saw an issue on arm32 with cfeb6ae8bcb96ccf, but not with cfeb6ae8bcb96ccf^. Other people saw an issue on ppc32 with both cfeb6ae8bcb96ccf and cfeb6ae8bcb96ccf^.

I look forward to hearing what is the issue in both cases.

For RZ/A, my problem report is
https://lore.kernel.org/all/[email protected]/

Thank you, Geert!

Quoted 7 lines

Huh. Is that patch you reverted causing Maple Tree or related code to attempt to acquire mutexes in early boot before interrupts have been enabled?

If that added WARN_ON_ONCE() doesn't trigger early, another approach would be to put it at the beginning of mutex_lock(). Or for that matter at the beginning of might_sleep().

With the WARN_ON_ONCE() moved from __setup_irq() to mutex_lock(), it does trigger on RZ/A1:

Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Built 1 zonelists, mobility grouping off. Total pages: 8128
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:283 mutex_lock+0x3c/0x68 +CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-rskrza1-02360-gd762084b1737-dirty #831
+Hardware name: Generic R7S72100 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from mutex_lock+0x3c/0x68
+ mutex_lock from __cpuhp_setup_state_cpuslocked+0x44/0x1c0
+ __cpuhp_setup_state_cpuslocked from page_alloc_init_cpuhp+0x28/0x64
+ page_alloc_init_cpuhp from mm_core_init+0x18/0x2a4
+ mm_core_init from start_kernel+0x250/0x47c
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 22876K/32768K available (5120K kernel code, 951K rwdata,
1208K rodata, 1024K init, 321K bss, 9892K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=1, Nodes=1

Thanks!

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#30 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 148 lines · Geert Uytterhoeven

Hi Paul,

Quoted 62 lines · Paul E. McKenney
Quoted 61 lines · Geert Uytterhoeven
Quoted 60 lines · Paul E. McKenney
Quoted 48 lines · Geert Uytterhoeven
Quoted 47 lines · Paul E. McKenney
Quoted 21 lines · Liam R. Howlett
Quoted 11 lines · Paul E. McKenney
Quoted 10 lines · Liam R. Howlett
Quoted 9 lines · Paul E. McKenney
Quoted 8 lines · Liam R. Howlett

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

    $ grep RCU .config
    # RCU Subsystem
    CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

Quoted 6 lines
Quoted 4 lines

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

There is no call to __setup_irq() from arch/powerpc/?

Glad it is not just me, given that I didn't see a direct call, either. So later in this email, I asked Liam to put a WARN_ON_ONCE(irqs_disabled()) just before that mutex_lock() in __setup_irq().

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Either way, invoking mutex_lock() early in boot before interrupts have been enabled is a bad idea. ;-)

I'll add that WARN_ON_ONCE() too, and will report back later today...

Thank you, looking forward to hearing the outcome!

On a typical arm32 system with global or architectured timer, I get:

WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xcc/0x6d0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.6.0-rc1-shmobile-02354-g24e058b77f5a #1655
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x40/0x4c
 dump_stack_lvl from __warn+0x78/0x10c
 __warn from warn_slowpath_fmt+0x90/0x11c
 warn_slowpath_fmt from __setup_irq+0xcc/0x6d0
 __setup_irq from __request_percpu_irq+0xb8/0xd0
 __request_percpu_irq from set_smp_ipi_range+0x88/0xdc
 set_smp_ipi_range from gic_of_init+0x1a4/0x4d8
 gic_of_init from of_irq_init+0x1f0/0x320
 of_irq_init from init_IRQ+0x74/0x104
 init_IRQ from start_kernel+0x360/0x5d0
 start_kernel from 0x0

Likewise on arm64 with architectured timer. But on these systems I do not see the issue I reported.

On RISC-V:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0x4e6/0x5ee
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-02355-g63165363c6a3 #63
Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
epc : __setup_irq+0x4e6/0x5ee
 ra : __setup_irq+0x38/0x5ee

epc : ffffffff80049472 ra : ffffffff80048fc4 sp : ffffffff81203cd0
gp : ffffffff812ee760 tp : ffffffff8120d5c0 t0 : ffffffd801854300 t1 : 0000000000000000 t2 : ffffffff81000ad8 s0 : ffffffff81203d20 s1 : ffffffd801855000 a0 : 0000000000000001 a1 : ffffffd801855000 a2 : ffffffd801854280 a3 : 0000000000000001 a4 : 0000000000000000 a5 : 0000000000000000 a6 : ffffffd801852108 a7 : ffffffd801852100 s2 : ffffffd801854280 s3 : 0000000000000005 s4 : ffffffff812c54c0 s5 : 0000000000000005 s6 : ffffffff80dd83a0 s7 : ffffffff805c0cc0 s8 : ffffffd801855018 s9 : 0000000000000000 s10: 0000000000000000
s11: 000000007bf638a0 t3 : 0000000000000000 t4 : 0000000000000002 t5 : ffffffff812882a0 t6 : 0000000000000001
status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003

[<ffffffff80049472>] __setup_irq+0x4e6/0x5ee
[<ffffffff800497a8>] __request_percpu_irq+0x98/0xcc
[<ffffffff8082501e>] riscv_timer_init_dt+0x186/0x22e
[<ffffffff80824b62>] timer_probe+0x62/0xd2
[<ffffffff80803c36>] time_init+0x86/0xa6
[<ffffffff80800ae2>] start_kernel+0x436/0x618
---[ end trace 0000000000000000 ]---

Also, no issue here.

On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did not trigger, until I applied Liam's patch ("init/main: Clear boot task idle flag"), which got rid of the "Interrupts were enabled early" warning, and now tells me, as expected:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/manage.c:1587 __setup_irq+0xc8/0x654
CPU: 0 PID: 0 Comm: swapper Not tainted
6.6.0-rc1-rskrza1-02357-g237e09fd64b8-dirty #829
Hardware name: Generic R7S72100 (Flattened Device Tree)
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x24/0x3c
 dump_stack_lvl from __warn+0x74/0xb8
 __warn from warn_slowpath_fmt+0x78/0xb0
 warn_slowpath_fmt from __setup_irq+0xc8/0x654
 __setup_irq from request_threaded_irq+0xac/0x13c
 request_threaded_irq from timer_of_init+0x238/0x2c8
 timer_of_init from ostm_init+0x98/0x208
 ostm_init from timer_probe+0x90/0xe4
 timer_probe from start_kernel+0x2c0/0x488
 start_kernel from 0x0
---[ end trace 0000000000000000 ]---
Quoted 2 lines

However, Liam's patch causes lots of warnings on the other systems...

What patch? The "init/main" patch?

What systems and what are they?

Thanks,
Liam

#31 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Hi Liam,

Quoted 5 lines · Liam R. Howlett
Quoted 4 lines · Geert Uytterhoeven

On the affected systems (RZ/A1 and RZ/A2), the WARN_ON_ONCE() did not trigger, until I applied Liam's patch ("init/main: Clear boot task idle flag"), which got rid of the "Interrupts were enabled early" warning, and now tells me, as expected:

[...]

Quoted 4 lines
Quoted 2 lines

However, Liam's patch causes lots of warnings on the other systems...

What patch? The "init/main" patch?

Indeed.

Quoted 1 line

What systems and what are they?

Reported in the thread:
https://lore.kernel.org/all/CAMuHMdWR68a49=vthdp03stpvaHLS5BRa+rhVdnr7gQDFkNotQ@mail.gmail.com

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#32 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Paul E. McKenney

Le 12/09/2023 à 10:14, Paul E. McKenney a écrit :

Quoted 189 lines · Liam R. Howlett
Quoted 21 lines · Paul E. McKenney
Quoted 11 lines · Liam R. Howlett
Quoted 10 lines · Paul E. McKenney
Quoted 9 lines · Liam R. Howlett
Quoted 8 lines

(Adding Paul & Shanker to Cc list.. please see below for why)

Apologies on the late response, I was away and have been struggling to get a working PPC32 test environment.

Quoted 2 lines · Geert Uytterhoeven

Hi Liam,

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines · Liam R. Howlett
Quoted 4 lines

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 1 line
Quoted 1 line
Quoted 7 lines

...

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

RCU-related configs:

     $ grep RCU .config
     # RCU Subsystem
     CONFIG_TINY_RCU=y

I must have been asleep last time I looked at this. I was looking at Tree RCU. Please accept my apologies for my lapse. :-/

However, Tiny RCU's call_rcu() also avoids enabling IRQs, so I would have said the same thing, albeit after looking at a lot less RCU code.

TL;DR:

1. Try making the __setup_irq() function's call to mutex_lock()
instead be as follows:

if (!mutex_trylock(&desc->request_mutex))
mutex_lock(&desc->request_mutex);

This might fail if __setup_irq() has other dependencies on a fully operational scheduler.

2. Move that ppc32 call to __setup_irq() much later, most definitely
after interrupts have been enabled and the scheduler is fully operational. Invoking mutex_lock() before that time is not a good idea. ;-)

For more detail, please read on!

Quoted 78 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 10 lines

# CONFIG_RCU_EXPERT is not set
CONFIG_TINY_SRCU=y
# end of RCU Subsystem
# RCU Debugging
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

I used the configuration from debian 8 and ran 'make oldconfig' to build my kernel. I have attached the configuration.

...

Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 12 lines

It appears to be something to do with struct maple_tree sparse_irqs. If you drop the rcu flag from that maple tree, then my configuration boots without the warning.

I *think* this is because we will reuse a lot more nodes. And I *think* the rcu flag is not needed, since there is a comment about reading the tree being protected by the mutex sparse_irq_lock within the kernel/irq/irqdesc.c file. Shanker, can you comment on that?

I wonder if there is a limit to the number of RCU free events before something is triggered to flush them out which could trigger IRQ enabling? Paul, could this be the case?

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

Are you asking if call_rcu() will re-enable interrupts in the following use case?

	local_irq_disable();
	call_rcu(&p->rh, my_cb_func);
	local_irq_enable();

I am not.

...

Quoted 7 lines
Quoted 7 lines
Quoted 2 lines

Or am I missing your point?

This is very early in the boot sequence when interrupts have not been enabled. What we are seeing is a WARN_ON() that is triggered by interrupts being enabled before they should be enabled.

Quoted 7 lines
Quoted 3 lines

I was wondering if, for example, I called call_rcu() a lot *before* interrupts were enabled, that something could trigger that would either enable interrupts or indicate the task needs rescheduling?

You aren't doing call_rcu() enough to hit OOM, are you? The actual RCU callback invocations won't happen until some time after the scheduler starts up.

I am not, it's just a detection of IRQs being enabled early.

Quoted 12 lines
Quoted 4 lines

Specifically the rescheduling part is suspect. I tracked down the call to a mutex_lock() which calls cond_resched(), so could rcu be 'encouraging' the rcu window by a reschedule request?

During boot before interrupts are enabled, RCU has not yet spawned any of its kthreads. Therefore, all of its attempts to do wakeups would notice a NULL task_struct pointer and refrain from actually doing the wakeup. If it did do the wakeup, you would see a NULL-pointer exception. See for example, invoke_rcu_core_kthread(), though that won't happen unless you booted with rcutree.use_softirq=0.

Quoted 2 lines

Besides, since when did doing a wakeup enable interrupts? That would make it hard to do wakeups from hardware interrupt handlers, not?

Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched().

Quoted 1 line

From what Michael said [1] in this thread, since something has already

set TIF_NEED_RESCHED, it will eventually enable interrupts on us.

Quoted 7 lines

I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs:

		/* force scheduling for rcu_qs() */
                 resched_cpu(0);

the task is set idle in sched_init() -> init_idle() and never changed, afaict.

Yes, because RCU eventually needs a context switch in order to make a grace period happen. And Maple Tree isn't the only thing invoking call_rcu() early, so this has been in place for a very long time.

Quoted 10 lines

Removing the RCU option from the maple tree in kernel/irq/irqdesc.c fixes the issue by avoiding the maple tree running call_rcu(). I am not sure on the locking of the tree so I feel this change may cause other issues...also it's before lockdep_init(), so any issue I introduce may not be detected.

When CONFIG_DEBUG_ATOMIC_SLEEP is configured, it seems that rcu does the same thing, but the IRQs are not enabled on return. So, resched_cpu(0) is called, but the IRQs warning of enabled isn't triggered. I failed to find a reason why.

Here you mean IRQs being enabled upon return from __setup_irq(), correct?

But yes, __setup_irq() does call mutex_lock(). Which will call preempt_schedule_common() via might_sleep() and __cond_resched(), even though that is clearly a very bad thing this early. And let's face it, the whole purpose of mutex_lock() is to block when needed. And a big purpose of that might_sleep() is to yell at people invoking this with interrupts disabled.

And most of the wrappers around __setup_irq() look to be intended for much later, after interrupts have been enabled. One exception is setup_percpu_irq(), which says that it is for "the early boot process", whenever that might be. But this is only invoked from mips in v6.5.

The __request_percpu_irq() function is wrappered by request_percpu_irq(), and its header comment suggests that it is to be called after there are multiple CPUs. I am not seeing a call that is obviously from ppc32, but there are a number of drivers using this with which I am unfamiliar.

The request_percpu_nmi() has to be followed up on each CPU using prepare_percpu_nmi() and enable_percpu_nmi(), so it is not clear that it is useful to invoke this before interrupts are enabled. But this is used by ARM, not ppc32 from what I can see.

So even though I am not seeing how ppc32 invokes __setup_irq() early, your testing clearly indicates that it is doing so.

Quoted 3 lines

I am not entirely sure what makes ppc32 different than other platforms in that the initial task is configured to an idle task and the first call to call_rcu (tiny!) would cause the observed behaviour.

Maybe something like this in __setup_irq(), right before the mutex_lock()?

Quoted 9 lines
	WARN_ON_ONCE(irqs_disabled());

This will dump the stack trace showing how __setup_irq() is being invoked in early boot on ppc32.

Again, given that __setup_irq() invokes mutex_lock(), invoking this function in its current form before interrupts have been enabled is a bad idea.

No trigger of that WARN_ON() I added in __setup_irq() as instructed above, still getting (pmac32_defconfig on MAC99 QEMU)

------------[ cut here ]------------
Interrupts were enabled early
WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x4d8/0x5c0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-dirty #481
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
NIP:  c0a6052c LR: c0a6052c CTR: 00000000
REGS: c0c4dee0 TRAP: 0700   Not tainted  (6.6.0-rc1-dirty)
MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24000282  XER: 20000000

GPR00: c0a6052c c0c4dfa0 c0b92580 0000001d c0b9d128 00000001 c0b9d148 3ffffdff
GPR08: c0ba80f0 00000000 00000000 3ffffe00 44000282 00000000 00000000 0199abfc
GPR16: 0199b0a4 7fde7fa4 7fc5ac0c 000000bb 41000000 01c690c8 c0b92014 c09b4bdc
GPR24: c0c55220 c0ac0000 00000000 efff9109 efff9100 0000000a c0c6d000 c0b920a0
NIP [c0a6052c] start_kernel+0x4d8/0x5c0
LR [c0a6052c] start_kernel+0x4d8/0x5c0

Call Trace:
[c0c4dfa0] [c0a6052c] start_kernel+0x4d8/0x5c0 (unreliable)
[c0c4dff0] [00003540] 0x3540
Code: 480037b1 48023c05 4bab88ed 90620260 480139e9 4b657ced 7d2000a6 
71298000 41a20014 3c60c09a 3863b78c 4b5e9ccd <0fe00000> 39200000 
99380008 7d2000a6
---[ end trace 0000000000000000 ]---
#33 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Le 12/09/2023 à 16:37, Christophe Leroy a écrit :

Quoted 39 lines
Quoted 6 lines

Maybe something like this in __setup_irq(), right before the mutex_lock()?

Quoted 9 lines
	WARN_ON_ONCE(irqs_disabled());

This will dump the stack trace showing how __setup_irq() is being invoked in early boot on ppc32.

Again, given that __setup_irq() invokes mutex_lock(), invoking this function in its current form before interrupts have been enabled is a bad idea.

No trigger of that WARN_ON() I added in __setup_irq() as instructed above, still getting (pmac32_defconfig on MAC99 QEMU)

------------[ cut here ]------------
Interrupts were enabled early
WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x4d8/0x5c0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc1-dirty #481
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
NIP:  c0a6052c LR: c0a6052c CTR: 00000000
REGS: c0c4dee0 TRAP: 0700   Not tainted  (6.6.0-rc1-dirty)
MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 24000282  XER: 20000000

GPR00: c0a6052c c0c4dfa0 c0b92580 0000001d c0b9d128 00000001 c0b9d148 3ffffdff
GPR08: c0ba80f0 00000000 00000000 3ffffe00 44000282 00000000 00000000 0199abfc
GPR16: 0199b0a4 7fde7fa4 7fc5ac0c 000000bb 41000000 01c690c8 c0b92014 c09b4bdc
GPR24: c0c55220 c0ac0000 00000000 efff9109 efff9100 0000000a c0c6d000 c0b920a0
NIP [c0a6052c] start_kernel+0x4d8/0x5c0
LR [c0a6052c] start_kernel+0x4d8/0x5c0

Quoted 8 lines
Call Trace:
[c0c4dfa0] [c0a6052c] start_kernel+0x4d8/0x5c0 (unreliable)
[c0c4dff0] [00003540] 0x3540
Code: 480037b1 48023c05 4bab88ed 90620260 480139e9 4b657ced 7d2000a6
71298000 41a20014 3c60c09a 3863b78c 4b5e9ccd <0fe00000> 39200000
99380008 7d2000a6
---[ end trace 0000000000000000 ]---

For what it's worth, the interrupts seems to be enabled by the call to init_IRQ().

Diging into it that's enabled by the call to __vmalloc_node() in alloc_vm_stack()

static void *__init alloc_vm_stack(void)

{
	return __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, THREADINFO_GFP,
			      NUMA_NO_NODE, (void *)_RET_IP_);
}

static void __init vmap_irqstack_init(void)

{
	int i;

	for_each_possible_cpu(i) {
		softirq_ctx[i] = alloc_vm_stack();
		hardirq_ctx[i] = alloc_vm_stack();
	}
}

void __init init_IRQ(void)

{
	if (IS_ENABLED(CONFIG_VMAP_STACK))
		vmap_irqstack_init();

	if (ppc_md.init_IRQ)
		ppc_md.init_IRQ();

	if (!WARN_ON(!ppc_md.get_irq))
		static_call_update(ppc_get_irq, ppc_md.get_irq);
}

Christophe

#34 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Liam R. Howlett
Quoted 6 lines · Liam R. Howlett

Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched().

Quoted 1 line

From what Michael said [1] in this thread, since something has already

set TIF_NEED_RESCHED, it will eventually enable interrupts on us.

Quoted 7 lines

I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs:

		/* force scheduling for rcu_qs() */                                                                     
                resched_cpu(0);

the task is set idle in sched_init() -> init_idle() and never changed, afaict.

Should calling init_idle() be deferred until after interrupts are all set up?

#35 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 12 lines · Matthew Wilcox
Quoted 11 lines · Liam R. Howlett

Taking the mutex lock in kernel/irq/manage.c __setup_irq() is calling a cond_resched().

Quoted 1 line

From what Michael said [1] in this thread, since something has already

set TIF_NEED_RESCHED, it will eventually enable interrupts on us.

I've traced this to running call_rcu() in kernel/rcu/tiny.c and is_idle_task(current) is true, which means rcu runs:

		/* force scheduling for rcu_qs() */                                                                     
                resched_cpu(0);
Quoted 5 lines
Quoted 2 lines

the task is set idle in sched_init() -> init_idle() and never changed, afaict.

Should calling init_idle() be deferred until after interrupts are all set up?

At this point it is not platform specific code so I don't know what kind of fallout I'll produce with a change like that, but I was wondering if the thread running the boot process is really 'idle'?

#36 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Liam R. Howlett

Hi Liam,

Quoted 28 lines · Liam R. Howlett
Quoted 5 lines · Geert Uytterhoeven
Quoted 4 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update. Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

...

Quoted 12 lines
Quoted 4 lines
Fixes 54a611b60590 ("Maple Tree: add new data structure")

Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 7 lines
     clocksource: timer@e803b000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 28958491609 ns
     sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 32537631224ns
     /soc/timer@e803b000: used for clocksource
     /soc/timer@e803c000: used for clock events
    +------------[ cut here ]------------
    +WARNING: CPU: 0 PID: 0 at init/main.c:992 start_kernel+0x2f0/0x480
    +Interrupts were enabled early
Quoted 6 lines

Note that the maple tree is involved in tracking the interrupts, see kernel/irq/irqdesc.c irq_insert_desc(), etc.

Quoted 1 line
    +CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rza2mevb-10197-g99b80d6b92b5 #237

I cannot find commit id 99b80d6b92b5.

That's my local tree, based on renesas-drivers-2023-08-29-v6.5.

Quoted 13 lines
Quoted 13 lines

+Hardware name: Generic R7S9210 (Flattened Device Tree)
+ unwind_backtrace from show_stack+0x10/0x14
+ show_stack from dump_stack_lvl+0x24/0x3c
+ dump_stack_lvl from __warn+0x74/0xb8
+ __warn from warn_slowpath_fmt+0x78/0xb0
+ warn_slowpath_fmt from start_kernel+0x2f0/0x480
+ start_kernel from 0x0
+---[ end trace 0000000000000000 ]---
Console: colour dummy device 80x30
printk: console [tty0] enabled
Calibrating delay loop (skipped) preset value.. 1056.00 BogoMIPS (lpj=5280000)

Quoted 5 lines
Quoted 1 line

Reverting this commit fixes the issue.

I have set up testing with qemu for powerpc 32b, and reverting this patch does not fix it for me. Did you revert the patch or bisect to the issue?

I did bisect the issue (on RZ/A) to cfeb6ae8bcb96ccf. Reverting that commit on top of my local tree fixed the issue.

Quoted 2 lines

It also happens on 0e0e9bd5f7b9 (I ran git checkout cfeb6ae8bcb96ccf^ to get the commit immediately before cfeb6ae8bcb96ccf).

That is not the case on Renesas RZ/A (which is arm32).

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#37 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Geert Uytterhoeven

[TLDR: I'm adding this report to the list of tracked Linux kernel regressions; the text you find below is based on a few templates paragraphs you might have encountered already in similar form. See link in footer if these mails annoy you.]

Quoted 14 lines · Geert Uytterhoeven
Quoted 7 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update.  Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

[...]
Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

Quoted 4 lines

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 1 line

[…]

Reverting this commit fixes the issue.

Thanks for the report. To be sure the issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression tracking bot:

#regzbot ^introduced cfeb6ae8bcb96ccf
#regzbot title maple_tree: warning on Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9
#regzbot ignore-activity

This isn't a regression? This issue or a fix for it are already discussed somewhere else? It was fixed already? You want to clarify when the regression started to happen? Or point out I got the title or something else totally wrong? Then just reply and tell me -- ideally while also telling regzbot about it, as explained by the page listed in the footer of this mail.

Developers: When fixing the issue, remember to add 'Link:' tags pointing to the report (the parent of this mail). See page linked in footer for details.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.

#38 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 15 lines · Linux regression tracking #adding (Thorsten Leemhuis)
Quoted 14 lines · Geert Uytterhoeven
Quoted 7 lines · Liam R. Howlett

The current implementation of append may cause duplicate data and/or incorrect ranges to be returned to a reader during an update.  Although this has not been reported or seen, disable the append write operation while the tree is in rcu mode out of an abundance of caution.

During the analysis of the mas_next_slot() the following was artificially created by separating the writer and reader code:

[...]
Thanks for your patch, which is now commit cfeb6ae8bcb96ccf ("maple_tree: disable mas_wr_append() when other readers are possible") in v6.5, and is being backported to stable.

Quoted 4 lines
Quoted 4 lines

On Renesas RZ/A1 and RZ/A2 (single-core Cortex-A9), this causes the following warning:

Quoted 1 line

[…]

Reverting this commit fixes the issue.

#regzbot fix: cff9b2332ab762
#regzbot ignore-activity

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat) --
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.

#39 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Liam R. Howlett

This breaks booting on ppc32:

Kernel attemptd to writ user page (1ff0) - exploit attempt? (uid: 0)

BUG: Unable to handle kernel data access on write at 0x00001ff0
Faulting instruction address: 0xc0009554
Vector: 300 (Data Access) at [c0b09d10]
    pc: c0009554: do_softirq_own_stack+0x18/0x30
    lr: c004f480: __irq_exit_rcu+0x70/0xc0
    sp: c0b09dd0

msr: 1032
dar: 1ff0
dsisr: 42000000
current = 0xc0a08360
pid = 0, comm = swapper
Linux version 6.5.0 ...
enter ? for help
[c0b09de0] c00ff480 __irq_exit_rcu+0x70/0xc0
[c0b09df0] c0005a98 Decrementer_virt+0x108/0x10c
--- Exception: 900 (Decrementer) at c06cfa0c __schedule+0x4fc/0x510 [c0b09ec0] c06cf75c __schedule+0x1cc/0x510 (unreliable) [c0b09ef0] c06cfc90 __cond_resched+0x2c/0x54
[c0b09f00] c06d07f8 mutex_lock_killable+0x18/0x5c [c0b09f10] c013c404 pcpu_alloc+0x110/0x4dc
[c0b09f70] c000cc34 alloc_descr.isra.18+0x48/0x144 [c0b09f90] c0988aa0 early_irq_init+0x64/0x8c
[c0b09fa0] c097a5a4 start_kernel+0x5b4/0x7b0
[c0b09ff0] 00003dc0
mon>

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."
#40 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 1 line · Andreas Schwab

This breaks booting on ppc32:

Does enabling CONFIG_DEBUG_ATOMIC_SLEEP fix the crash? It did for me on qemu.

cheers

Quoted 31 lines

Kernel attemptd to writ user page (1ff0) - exploit attempt? (uid: 0)

BUG: Unable to handle kernel data access on write at 0x00001ff0
Faulting instruction address: 0xc0009554
Vector: 300 (Data Access) at [c0b09d10]
    pc: c0009554: do_softirq_own_stack+0x18/0x30
    lr: c004f480: __irq_exit_rcu+0x70/0xc0
    sp: c0b09dd0

msr: 1032
dar: 1ff0
dsisr: 42000000
current = 0xc0a08360
pid = 0, comm = swapper
Linux version 6.5.0 ...
enter ? for help
[c0b09de0] c00ff480 __irq_exit_rcu+0x70/0xc0
[c0b09df0] c0005a98 Decrementer_virt+0x108/0x10c
--- Exception: 900 (Decrementer) at c06cfa0c __schedule+0x4fc/0x510 [c0b09ec0] c06cf75c __schedule+0x1cc/0x510 (unreliable) [c0b09ef0] c06cfc90 __cond_resched+0x2c/0x54
[c0b09f00] c06d07f8 mutex_lock_killable+0x18/0x5c [c0b09f10] c013c404 pcpu_alloc+0x110/0x4dc
[c0b09f70] c000cc34 alloc_descr.isra.18+0x48/0x144 [c0b09f90] c0988aa0 early_irq_init+0x64/0x8c
[c0b09fa0] c097a5a4 start_kernel+0x5b4/0x7b0
[c0b09ff0] 00003dc0
mon>

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."
#41 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 4 lines · Michael Ellerman
Quoted 1 line · Andreas Schwab

This breaks booting on ppc32:

Does enabling CONFIG_DEBUG_ATOMIC_SLEEP fix the crash?

Yes, it does.

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."
#42 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

In reply to Andreas Schwab

Any news? This is still broken.

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."
#43 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 1 line · Andreas Schwab

Any news? This is still broken.

I have a proposed fix. I seem to have caused a pre-existing problem to show up. Please see if the attached works for you, and I'll send it to a lot of people.

Thanks,
Liam

From 9ef8f834bb0342dc26464b9dd0165929d3e6a7e5 Mon Sep 17 00:00:00 2001
From: "Liam R. Howlett" <[email protected]>
Date: Tue, 12 Sep 2023 13:45:29 -0400
Subject: [PATCH] init/main: Clear boot task idle flag

Initial booting was setting the task flag to idle (PF_IDLE) by the call path sched_init() -> init_idle(). Having the task idle and calling call_rcu() in kernel/rcu/tiny.c means that TIF_NEED_RESCHED will be enabled. Subsequent calls to any cond_resched() will enable IRQs, potentially earlier than the enabling of IRQs.

This causes a warning later in start_kernel() as interrupts are enabled before the are fully set up.

Fix this issue by clearing the PF_IDLE flag on return from sched_init() and restore the flag in rest_init().

---
 init/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
init/main.c +2 -1
index ad920fac325c..46b35be8f00a 100644
@@ -696,7 +696,7 @@ noinline void __ref __noreturn rest_init(void)
 	 */
 	rcu_read_lock();
 	tsk = find_task_by_pid_ns(pid, &init_pid_ns);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	tsk->flags |= PF_NO_SETAFFINITY | PF_IDLE;
 	set_cpus_allowed_ptr(tsk, cpumask_of(smp_processor_id()));
 	rcu_read_unlock();
 
@@ -938,6 +938,7 @@ void start_kernel(void)
 	 * time - but meanwhile we still have a functioning scheduler.
 	 */
 	sched_init();
+	current->flags &= ~PF_IDLE;
 
 	if (WARN(!irqs_disabled(),
 		 "Interrupts were enabled *very* early, fixing it\n"))
Signature · 1 line
2.39.2
#44 lore raw

Re: [PATCH v2 1/2] maple_tree: Disable mas_wr_append() when other readers are possible

Quoted 6 lines · Liam R. Howlett
Quoted 1 line · Andreas Schwab

Any news? This is still broken.

I have a proposed fix. I seem to have caused a pre-existing problem to show up. Please see if the attached works for you, and I'll send it to a lot of people.

Thanks, it fixes the issue for me (tested both 6.5 and 6.6-rc1).

Signature · 3 lines
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510  2552 DF73 E780 A9DA AEC1
"And now for something completely different."
#45 lore raw

PATCH v2 2/2 maple_tree: Clean up mas_wr_append()

In reply to Liam R. Howlett

Avoid setting the variables until necessary, and actually use the variables where applicable. Introducing a variable for the slots array avoids spanning multiple lines.

Add the missing argument to the documentation.

Use the node type when setting the metadata instead of blindly assuming the type.

Finally, add a trace point to the function for successful store.

---
 lib/maple_tree.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)
lib/maple_tree.c +20 -14
index 05d5db255c39..ee1ff0c59fd7 100644
@@ -4106,6 +4106,7 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas)
 /*
  * mas_wr_append: Attempt to append
  * @wr_mas: the maple write state
+ * @new_end: The end of the node after the modification
  *
  * This is currently unsafe in rcu mode since the end of the node may be cached
  * by readers while the node contents may be updated which could result in
@@ -4114,42 +4115,46 @@ static inline unsigned char mas_wr_new_end(struct ma_wr_state *wr_mas)
  * Return: True if appended, false otherwise
  */
 static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
-				 unsigned char new_end)
+		unsigned char new_end)
 {
-	unsigned char end = wr_mas->node_end;
-	struct ma_state *mas = wr_mas->mas;
-	unsigned char node_pivots = mt_pivots[wr_mas->type];
+	struct ma_state *mas;
+	void __rcu **slots;
+	unsigned char end;
 
+	mas = wr_mas->mas;
 	if (mt_in_rcu(mas->tree))
 		return false;
 
 	if (mas->offset != wr_mas->node_end)
 		return false;
 
-	if (new_end < node_pivots) {
+	end = wr_mas->node_end;
+	if (mas->offset != end)
+		return false;
+
+	if (new_end < mt_pivots[wr_mas->type]) {
 		wr_mas->pivots[new_end] = wr_mas->pivots[end];
-		ma_set_meta(wr_mas->node, maple_leaf_64, 0, new_end);
+		ma_set_meta(wr_mas->node, wr_mas->type, 0, new_end);
 	}
 
-	if (new_end == wr_mas->node_end + 1) {
+	slots = wr_mas->slots;
+	if (new_end == end + 1) {
 		if (mas->last == wr_mas->r_max) {
 			/* Append to end of range */
-			rcu_assign_pointer(wr_mas->slots[new_end],
-					   wr_mas->entry);
+			rcu_assign_pointer(slots[new_end], wr_mas->entry);
 			wr_mas->pivots[end] = mas->index - 1;
 			mas->offset = new_end;
 		} else {
 			/* Append to start of range */
-			rcu_assign_pointer(wr_mas->slots[new_end],
-					   wr_mas->content);
+			rcu_assign_pointer(slots[new_end], wr_mas->content);
 			wr_mas->pivots[end] = mas->last;
-			rcu_assign_pointer(wr_mas->slots[end], wr_mas->entry);
+			rcu_assign_pointer(slots[end], wr_mas->entry);
 		}
 	} else {
 		/* Append to the range without touching any boundaries. */
-		rcu_assign_pointer(wr_mas->slots[new_end], wr_mas->content);
+		rcu_assign_pointer(slots[new_end], wr_mas->content);
 		wr_mas->pivots[end + 1] = mas->last;
-		rcu_assign_pointer(wr_mas->slots[end + 1], wr_mas->entry);
+		rcu_assign_pointer(slots[end + 1], wr_mas->entry);
 		wr_mas->pivots[end] = mas->index - 1;
 		mas->offset = end + 1;
 	}
@@ -4157,6 +4162,7 @@ static inline bool mas_wr_append(struct ma_wr_state *wr_mas,
 	if (!wr_mas->content || !wr_mas->entry)
 		mas_update_gap(mas);
 
+	trace_ma_write(__func__, mas, new_end, wr_mas->entry);
 	return  true;
 }
 
Signature · 1 line
2.39.2