Skip to contentSkip to conversation

clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM

PATCH New Sasha Levin 1 participant 3 messages Aug 22, 2023

Subsystems (5)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/3 clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM

From: Baoquan He <[email protected]>

[ Upstream commit e7dd44f4f3166db45248414f5df8f615392de47a ]

On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available.

Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset:

------
ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup':
clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap'
ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap'
------

---
 drivers/clk/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/Kconfig +1 -0
index cc871ae3a1792..5b34dbc830ee4 100644
@@ -302,6 +302,7 @@ config COMMON_CLK_BD718XX
 config COMMON_CLK_FIXED_MMIO
 	bool "Clock driver for Memory Mapped Fixed values"
 	depends on COMMON_CLK && OF
+	depends on HAS_IOMEM
 	help
 	  Support for Memory Mapped IO Fixed clocks
 
Signature · 1 line
2.40.1
author maintainer
#1 lore raw

PATCH 2/3 net: usb: qmi_wwan: add Quectel EM05GV2

From: Martin Kohn <[email protected]>

[ Upstream commit d4480c9bb9258db9ddf2e632f6ef81e96b41089c ]

Add support for Quectel EM05GV2 (G=global) with vendor ID 0x2c7c and product ID 0x030e

Enabling DTR on this modem was necessary to ensure stable operation. Patch for usb: serial: option: is also in progress.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030e Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
index a4be176fdd249..ebc1f01d5ea27 100644
@@ -1373,6 +1373,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)},	/* Quectel EG91 */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)},	/* Quectel EG95 */
 	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x030e, 4)},	/* Quectel EM05GV2 */
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
Signature · 1 line
2.40.1
author maintainer
#2 lore raw

PATCH 3/3 wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 16e455a465fca91907af0108f3d013150386df30 ]

Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers a backtrace caused by the following field-spanning warning:

memcpy: detected field-spanning write (size 120) of single field
"&params_le->channel_list[0]" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)

The driver still works after this warning. The warning was introduced by the new field-spanning write checks which were enabled recently.

Fix this by replacing the channel_list[1] declaration at the end of the struct with a flexible array declaration.

Most users of struct brcmf_scan_params_le calculate the size to alloc using the size of the non flex-array part of the struct + needed extra space, so they do not care about sizeof(struct brcmf_scan_params_le).

brcmf_notify_escan_complete() however uses the struct on the stack, expecting there to be room for at least 1 entry in the channel-list to store the special -1 abort channel-id.

To make this work use an anonymous union with a padding member added + the actual channel_list flexible array.

---
 .../net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h  | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +6 -1
index ce18433aaefb5..a0f1c07eaf3c2 100644
@@ -381,7 +381,12 @@ struct brcmf_scan_params_le {
 				 * fixed parameter portion is assumed, otherwise
 				 * ssid in the fixed portion is ignored
 				 */
-	__le16 channel_list[1];	/* list of chanspecs */
+	union {
+		__le16 padding;	/* Reserve space for at least 1 entry for abort
+				 * which uses an on stack brcmf_scan_params_le
+				 */
+		DECLARE_FLEX_ARRAY(__le16, channel_list);	/* chanspecs */
+	};
 };
 
 struct brcmf_scan_results {
Signature · 1 line
2.40.1