net: usb: qmi_wwan: add Quectel EM05GV2
Subsystems (4)
Sasha Levin
maintainerPATCH 1/2 net: usb: qmi_wwan: add Quectel EM05GV2
From: Martin Kohn <[email protected]>
[ Upstream commit d4480c9bb9258db9ddf2e632f6ef81e96b41089c ]
Add support for Quectel EM05GV2 (G=global) with vendor ID 0x2c7c and product ID 0x030e
Enabling DTR on this modem was necessary to ensure stable operation. Patch for usb: serial: option: is also in progress.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030e Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
--- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/usb/qmi_wwan.c +1 -0
@@ -1365,6 +1365,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x030e, 4)}, /* Quectel EM05GV2 */ {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */ {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */ {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/
Signature · 1 line
2.40.1
Sasha Levin
maintainerPATCH 2/2 wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
From: Hans de Goede <[email protected]>
[ Upstream commit 16e455a465fca91907af0108f3d013150386df30 ]
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers a backtrace caused by the following field-spanning warning:
memcpy: detected field-spanning write (size 120) of single field
"¶ms_le->channel_list[0]" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)
The driver still works after this warning. The warning was introduced by the new field-spanning write checks which were enabled recently.
Fix this by replacing the channel_list[1] declaration at the end of the struct with a flexible array declaration.
Most users of struct brcmf_scan_params_le calculate the size to alloc using the size of the non flex-array part of the struct + needed extra space, so they do not care about sizeof(struct brcmf_scan_params_le).
brcmf_notify_escan_complete() however uses the struct on the stack, expecting there to be room for at least 1 entry in the channel-list to store the special -1 abort channel-id.
To make this work use an anonymous union with a padding member added + the actual channel_list flexible array.
--- .../net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +6 -1
@@ -354,7 +354,12 @@ struct brcmf_scan_params_le {* fixed parameter portion is assumed, otherwise * ssid in the fixed portion is ignored */ -__le16 channel_list[1 ];/* list of chanspecs */ +union { +__le16 padding;/* Reserve space for at least 1 entry for abort +* which uses an on stack brcmf_scan_params_le +*/ + DECLARE_FLEX_ARRAY(__le16, channel_list); /* chanspecs */ + }; };struct brcmf_scan_results {
Signature · 1 line
2.40.1