Skip to contentSkip to conversation

Convert CFG_SYS_UBOOT_START to Kconfig

PATCH Superseded Jesse Taube 3 participants 5 messages Aug 24, 2023

Subsystems (6)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Convert CFG_SYS_UBOOT_START to Kconfig

Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.

---
 Makefile                                       | 16 ++++------------
 arch/arm/mach-k3/config_secure.mk              |  2 +-
 arch/arm/mach-omap2/config_secure.mk           |  2 +-
 boot/Kconfig                                   | 16 ++++++++++++++++
 common/spl/spl.c                               |  6 +-----
 common/spl/spl_fit.c                           |  2 +-
 configs/imxrt1020-evk_defconfig                |  2 ++
 configs/imxrt1050-evk_defconfig                |  2 ++
 configs/imxrt1170-evk_defconfig                |  2 ++
 include/configs/gardena-smart-gateway-mt7688.h |  4 ----
 include/configs/imxrt1020-evk.h                |  6 ------
 include/configs/imxrt1050-evk.h                |  6 ------
 include/configs/imxrt1170-evk.h                |  3 ---
 include/configs/linkit-smart-7688.h            |  4 ----
 include/configs/mt7620.h                       |  3 ---
 include/configs/mt7628.h                       |  3 ---
 include/configs/mt8512.h                       |  2 --
 include/configs/vocore2.h                      |  4 ----
 include/spl.h                                  |  2 +-
 19 files changed, 31 insertions(+), 56 deletions(-)
Makefile +4 -12
index 9b90204bfe..13d4c63439 100644
@@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 	$(call if_changed,objcopy)
 
-#
-# U-Boot entry point, needed for booting of full-blown U-Boot
-# from the SPL U-Boot version.
-#
-ifndef CFG_SYS_UBOOT_START
-CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
-endif
-
 # Boards with more complex image requirements can provide an .its source file
 # or a generator script
 # NOTE: Please do not use this. We are migrating away from Makefile rules to use
@@ -1391,7 +1383,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-p $(CONFIG_FIT_EXTERNAL_OFFSET) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
arch/arm/mach-k3/config_secure.mk +1 -1
index 7bc8af813a..9cc1f9eb24 100644
@@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
 	$(call if_changed,mkfitimage)
 
 MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
arch/arm/mach-omap2/config_secure.mk +1 -1
index 24ddcdb961..f76262bb0c 100644
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
boot/Kconfig +16 -0
index 5e2d4286ae..f2f7821cc1 100644
@@ -737,6 +737,22 @@ config TEXT_BASE
 	default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
 	default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
 	hex "Text Base"
+	help
+	  The address in memory that U-Boot will be copied from, initially.
+
+config HAVE_SYS_UBOOT_START
+	bool
+	depends on HAVE_TEXT_BASE
+	prompt "Use custom U-Boot Start"
+	help
+	  By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
+	  entry point are the same. Select this to set a different U-Boot start address.
+
+config SYS_UBOOT_START
+	hex
+	depends on HAVE_TEXT_BASE
+	default TEXT_BASE
+	prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
 	help
 	  The address in memory that U-Boot will be running from, initially.
 
common/spl/spl.c +1 -5
index 0062f3f45d..f4b30b3cf3 100644
@@ -45,10 +45,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 DECLARE_BINMAN_MAGIC_SYM;
 
-#ifndef CFG_SYS_UBOOT_START
-#define CFG_SYS_UBOOT_START	CONFIG_TEXT_BASE
-#endif
-
 u32 *boot_params_ptr = NULL;
 
 #if CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS)
@@ -252,7 +248,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image)
 		spl_image->entry_point = u_boot_pos;
 		spl_image->load_addr = u_boot_pos;
 	} else {
-		spl_image->entry_point = CFG_SYS_UBOOT_START;
+		spl_image->entry_point = CONFIG_SYS_UBOOT_START;
 		spl_image->load_addr = CONFIG_TEXT_BASE;
 	}
 	spl_image->os = IH_OS_U_BOOT;
common/spl/spl_fit.c +1 -1
index 730639f756..3d39e70e65 100644
@@ -816,7 +816,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 	}
 
 	/*
-	 * If a platform does not provide CFG_SYS_UBOOT_START, U-Boot's
+	 * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
 	 * Makefile will set it to 0 and it will end up as the entry point
 	 * here. What it actually means is: use the load address.
 	 */
configs/imxrt1020-evk_defconfig +2 -0
index 40210a5f0b..6b63b80895 100644
@@ -19,6 +19,8 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x20209000
+CONFIG_HAVE_SYS_UBOOT_START=y
+CONFIG_SYS_UBOOT_START=0x800023FD
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SD_BOOT=y
 # CONFIG_USE_BOOTCOMMAND is not set
configs/imxrt1050-evk_defconfig +2 -0
index 8f7a36fea7..cbf9469b24 100644
@@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x20209000
+CONFIG_HAVE_SYS_UBOOT_START=y
+CONFIG_SYS_UBOOT_START=0x800023FD
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SD_BOOT=y
 # CONFIG_USE_BOOTCOMMAND is not set
configs/imxrt1170-evk_defconfig +2 -0
index 8320c091d2..83825da6de 100644
@@ -21,6 +21,8 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SIZE_LIMIT=0x20000
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x202C0000
+CONFIG_HAVE_SYS_UBOOT_START=y
+CONFIG_SYS_UBOOT_START=0x202403FD
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SD_BOOT=y
 # CONFIG_USE_BOOTCOMMAND is not set
include/configs/gardena-smart-gateway-mt7688.h +0 -4
index 0ba4efe67a..1b97ae22fc 100644
@@ -11,10 +11,6 @@
 
 #define CFG_SYS_INIT_SP_OFFSET	0x400000
 
-/* SPL */
-
-#define CFG_SYS_UBOOT_START		CONFIG_TEXT_BASE
-
 /* Dummy value */
 #define CFG_SYS_UBOOT_BASE		0
 
include/configs/imxrt1020-evk.h +0 -6
index e180387c68..cd6af93454 100644
@@ -18,10 +18,4 @@
 #define DMAMEM_BASE			(PHYS_SDRAM + PHYS_SDRAM_SIZE - \
 					 DMAMEM_SZ_ALL)
 
-/*
- * Configuration of the external SDRAM memory
- */
-
-#define CFG_SYS_UBOOT_START		0x800023FD
-
 #endif /* __IMXRT1020_EVK_H */
include/configs/imxrt1050-evk.h +0 -6
index 7688464841..2af2dde2ae 100644
@@ -25,10 +25,4 @@
 		"stderr=serial,vidconsole\0"
 #endif
 
-/*
- * Configuration of the external SDRAM memory
- */
-
-#define CFG_SYS_UBOOT_START		0x800023FD
-
 #endif /* __IMXRT1050_EVK_H */
include/configs/imxrt1170-evk.h +0 -3
index f83429082a..1ccaa15bc1 100644
@@ -22,8 +22,5 @@
 #define DMAMEM_SZ_ALL			(1 * 1024 * 1024)
 #define DMAMEM_BASE			(PHYS_SDRAM + PHYS_SDRAM_SIZE - \
 					 DMAMEM_SZ_ALL)
-/* For SPL */
-#define CFG_SYS_UBOOT_START		0x202403FD
-/* For SPL ends */
 
 #endif /* __IMXRT1170_EVK_H */
include/configs/linkit-smart-7688.h +0 -4
index f16c7e9122..e8f7a59c40 100644
@@ -11,10 +11,6 @@
 
 #define CFG_SYS_INIT_SP_OFFSET	0x400000
 
-/* SPL */
-
-#define CFG_SYS_UBOOT_START		CONFIG_TEXT_BASE
-
 /* Dummy value */
 #define CFG_SYS_UBOOT_BASE		0
 
include/configs/mt7620.h +0 -3
index d69d35fa96..3bc0c18a1e 100644
@@ -12,9 +12,6 @@
 
 #define CFG_SYS_INIT_SP_OFFSET		0x400000
 
-/* SPL */
-#define CFG_SYS_UBOOT_START		CONFIG_TEXT_BASE
-
 /* Dummy value */
 #define CFG_SYS_UBOOT_BASE		0
 
include/configs/mt7628.h +0 -3
index 0ac376d33c..1df06811d6 100644
@@ -22,9 +22,6 @@
 #define CFG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200, \
 					  230400, 460800, 921600 }
 
-/* SPL */
-#define CFG_SYS_UBOOT_START		CONFIG_TEXT_BASE
-
 /* Dummy value */
 #define CFG_SYS_UBOOT_BASE		0
 
include/configs/mt8512.h +0 -2
index c0fc8688ca..4e70291e94 100644
@@ -10,8 +10,6 @@
 #define __MT8512_H
 
 /* Uboot definition */
-#define CFG_SYS_UBOOT_START			CONFIG_TEXT_BASE
-
 #define ENV_BOOT_READ_IMAGE \
 	"boot_rd_img=mmc dev 0" \
 	";mmc read ${loadaddr} 0x27000 0x8000" \
include/configs/vocore2.h +0 -4
index 43050d61c3..eb87633661 100644
@@ -11,10 +11,6 @@
 
 #define CFG_SYS_INIT_SP_OFFSET	0x400000
 
-/* SPL */
-
-#define CFG_SYS_UBOOT_START		CONFIG_TEXT_BASE
-
 /* Dummy value */
 #define CFG_SYS_UBOOT_BASE		0
 
include/spl.h +1 -1
index 92bcaa90a4..57da1484f0 100644
@@ -484,7 +484,7 @@ unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
  * spl_set_header_raw_uboot() - Set up a standard SPL image structure
  *
  * This sets up the given spl_image which the standard values obtained from
- * config options: CONFIG_SYS_MONITOR_LEN, CFG_SYS_UBOOT_START,
+ * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START,
  * CONFIG_TEXT_BASE.
  *
  * @spl_image: Image description to set up
Signature · 1 line
2.40.0
#1 lore raw
Quoted 13 lines · Jesse Taube

Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.

[snip]

Quoted 5 lines
boot/Kconfig +0 -0
index 5e2d4286ae..f2f7821cc1 100644

boot/Kconfig config TEXT_BASE · line 746

Quoted 10 lines
boot/Kconfig +7 -0
@@ -737,6 +737,22 @@ config TEXT_BASE
 	default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
 	default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
 	hex "Text Base"
+	help
+	  The address in memory that U-Boot will be copied from, initially.
+
+config HAVE_SYS_UBOOT_START
+	bool
+	depends on HAVE_TEXT_BASE
+	prompt "Use custom U-Boot Start"

We should use:
bool "Use custom U-Boot start address"

instead of separate bool/prompt.

boot/Kconfig config TEXT_BASE · line 755

Quoted 9 lines
boot/Kconfig +9 -0
+	help
+	  By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
+	  entry point are the same. Select this to set a different U-Boot start address.
+
+config SYS_UBOOT_START
+	hex
+	depends on HAVE_TEXT_BASE
+	default TEXT_BASE
+	prompt "U-Boot entry" if HAVE_SYS_UBOOT_START

This is clever, and can be kept. I didn't catch at first that this will do what I was hoping of setting a default, but then allowing for it to be changed.

boot/Kconfig config TEXT_BASE · line 757

Quoted 2 lines
boot/Kconfig +0 -0
 	help
 	  The address in memory that U-Boot will be running from, initially.

This should be slightly different and expand on what's in the help text for HAVE_SYS_UBOOT_START.

Thanks!

Signature · 1 line
Tom
#2 lore raw
In reply to Jesse Taube

Hi Jesse,

Quoted 120 lines · Jesse Taube

Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.

---
 Makefile                                       | 16 ++++------------
 arch/arm/mach-k3/config_secure.mk              |  2 +-
 arch/arm/mach-omap2/config_secure.mk           |  2 +-
 boot/Kconfig                                   | 16 ++++++++++++++++
 common/spl/spl.c                               |  6 +-----
 common/spl/spl_fit.c                           |  2 +-
 configs/imxrt1020-evk_defconfig                |  2 ++
 configs/imxrt1050-evk_defconfig                |  2 ++
 configs/imxrt1170-evk_defconfig                |  2 ++
 include/configs/gardena-smart-gateway-mt7688.h |  4 ----
 include/configs/imxrt1020-evk.h                |  6 ------
 include/configs/imxrt1050-evk.h                |  6 ------
 include/configs/imxrt1170-evk.h                |  3 ---
 include/configs/linkit-smart-7688.h            |  4 ----
 include/configs/mt7620.h                       |  3 ---
 include/configs/mt7628.h                       |  3 ---
 include/configs/mt8512.h                       |  2 --
 include/configs/vocore2.h                      |  4 ----
 include/spl.h                                  |  2 +-
 19 files changed, 31 insertions(+), 56 deletions(-)
Makefile +4 -12
index 9b90204bfe..13d4c63439 100644
@@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
        $(call if_changed,objcopy)
 
-#
-# U-Boot entry point, needed for booting of full-blown U-Boot
-# from the SPL U-Boot version.
-#
-ifndef CFG_SYS_UBOOT_START
-CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
-endif
-
 # Boards with more complex image requirements can provide an .its source file
 # or a generator script
 # NOTE: Please do not use this. We are migrating away from Makefile rules to use
@@ -1391,7 +1383,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
arch/arm/mach-k3/config_secure.mk +1 -1
index 7bc8af813a..9cc1f9eb24 100644
@@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
        $(call if_changed,mkfitimage)
 
 MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
arch/arm/mach-omap2/config_secure.mk +1 -1
index 24ddcdb961..f76262bb0c 100644
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
boot/Kconfig +0 -0
index 5e2d4286ae..f2f7821cc1 100644
@@ -737,6 +737,22 @@ config TEXT_BASE
        default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
        default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
        hex "Text Base"

boot/Kconfig config TEXT_BASE · line 749

Quoted 10 lines
boot/Kconfig +10 -0
+       help
+         The address in memory that U-Boot will be copied from, initially.
+
+config HAVE_SYS_UBOOT_START
+       bool
+       depends on HAVE_TEXT_BASE
+       prompt "Use custom U-Boot Start"
+       help
+         By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
+         entry point are the same. Select this to set a different U-Boot start address.

space after 'from'

Also this is a little unclear. START means the start address that U-Boot will run from. If it is different from TEXT_BASE, then something loads it here?

This could do with a bit more detail.

boot/Kconfig config TEXT_BASE · line 758

Quoted 9 lines
boot/Kconfig +6 -0
+
+config SYS_UBOOT_START
+       hex
+       depends on HAVE_TEXT_BASE
+       default TEXT_BASE
+       prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
        help
          The address in memory that U-Boot will be running from, initially.
 

Regards,
Simon

author
#3 lore raw
Quoted 137 lines · Simon Glass

Hi Jesse,

Quoted 120 lines · Jesse Taube

Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.

---
 Makefile                                       | 16 ++++------------
 arch/arm/mach-k3/config_secure.mk              |  2 +-
 arch/arm/mach-omap2/config_secure.mk           |  2 +-
 boot/Kconfig                                   | 16 ++++++++++++++++
 common/spl/spl.c                               |  6 +-----
 common/spl/spl_fit.c                           |  2 +-
 configs/imxrt1020-evk_defconfig                |  2 ++
 configs/imxrt1050-evk_defconfig                |  2 ++
 configs/imxrt1170-evk_defconfig                |  2 ++
 include/configs/gardena-smart-gateway-mt7688.h |  4 ----
 include/configs/imxrt1020-evk.h                |  6 ------
 include/configs/imxrt1050-evk.h                |  6 ------
 include/configs/imxrt1170-evk.h                |  3 ---
 include/configs/linkit-smart-7688.h            |  4 ----
 include/configs/mt7620.h                       |  3 ---
 include/configs/mt7628.h                       |  3 ---
 include/configs/mt8512.h                       |  2 --
 include/configs/vocore2.h                      |  4 ----
 include/spl.h                                  |  2 +-
 19 files changed, 31 insertions(+), 56 deletions(-)
Makefile +4 -12
index 9b90204bfe..13d4c63439 100644
@@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
        $(call if_changed,objcopy)
 
-#
-# U-Boot entry point, needed for booting of full-blown U-Boot
-# from the SPL U-Boot version.
-#
-ifndef CFG_SYS_UBOOT_START
-CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
-endif
-
 # Boards with more complex image requirements can provide an .its source file
 # or a generator script
 # NOTE: Please do not use this. We are migrating away from Makefile rules to use
@@ -1391,7 +1383,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
arch/arm/mach-k3/config_secure.mk +1 -1
index 7bc8af813a..9cc1f9eb24 100644
@@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
        $(call if_changed,mkfitimage)
 
 MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
arch/arm/mach-omap2/config_secure.mk +1 -1
index 24ddcdb961..f76262bb0c 100644
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
boot/Kconfig +0 -0
index 5e2d4286ae..f2f7821cc1 100644
@@ -737,6 +737,22 @@ config TEXT_BASE
        default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
        default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
        hex "Text Base"

boot/Kconfig config TEXT_BASE · line 749

Quoted 10 lines
boot/Kconfig +10 -0
+       help
+         The address in memory that U-Boot will be copied from, initially.
+
+config HAVE_SYS_UBOOT_START
+       bool
+       depends on HAVE_TEXT_BASE
+       prompt "Use custom U-Boot Start"
+       help
+         By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
+         entry point are the same. Select this to set a different U-Boot start address.

space after 'from'

Quoted 5 lines

Also this is a little unclear. START means the start address that U-Boot will run from. If it is different from TEXT_BASE, then something loads it here

This could do with a bit more detail.

Yes, it is and why I edited the TEXT_BASE help prompt. I'm not sure how to word that this is where the SPL will start execution after the jump.
TEXT_BASE is where the spl will copy the binary to.

Quoted 11 lines

boot/Kconfig config TEXT_BASE · line 755

Quoted 7 lines
boot/Kconfig +6 -0
+
+config SYS_UBOOT_START
+       hex
+       depends on HAVE_TEXT_BASE
+       default TEXT_BASE
+       prompt "U-Boot entry" if HAVE_SYS_UBOOT_START

Tom:
This is clever, and can be kept. I didn't catch at first that this will do what I was hoping of setting a default, but then allowing for it to be changed.

Was there another way of doing this? I looked at the docs for a while to figure this out.

Thanks,
Jesse Taube

Quoted 6 lines

boot/Kconfig config TEXT_BASE · line 758

Quoted 3 lines
boot/Kconfig +0 -0
        help
          The address in memory that U-Boot will be running from, initially.
 

Regards,
Simon

#4 lore raw
Quoted 161 lines · Jesse T
Quoted 137 lines · Simon Glass

Hi Jesse,

Quoted 120 lines · Jesse Taube

Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*") renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately, this meant that the value was no longer available to the Makefile. This caused imxrt to fail to boot. All the other boards that used this variable were unaffected because they were using the default value which is CONFIG_TEXT_BASE.

This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default value to CONFIG_TEXT_BASE.

---
 Makefile                                       | 16 ++++------------
 arch/arm/mach-k3/config_secure.mk              |  2 +-
 arch/arm/mach-omap2/config_secure.mk           |  2 +-
 boot/Kconfig                                   | 16 ++++++++++++++++
 common/spl/spl.c                               |  6 +-----
 common/spl/spl_fit.c                           |  2 +-
 configs/imxrt1020-evk_defconfig                |  2 ++
 configs/imxrt1050-evk_defconfig                |  2 ++
 configs/imxrt1170-evk_defconfig                |  2 ++
 include/configs/gardena-smart-gateway-mt7688.h |  4 ----
 include/configs/imxrt1020-evk.h                |  6 ------
 include/configs/imxrt1050-evk.h                |  6 ------
 include/configs/imxrt1170-evk.h                |  3 ---
 include/configs/linkit-smart-7688.h            |  4 ----
 include/configs/mt7620.h                       |  3 ---
 include/configs/mt7628.h                       |  3 ---
 include/configs/mt8512.h                       |  2 --
 include/configs/vocore2.h                      |  4 ----
 include/spl.h                                  |  2 +-
 19 files changed, 31 insertions(+), 56 deletions(-)
Makefile +4 -12
index 9b90204bfe..13d4c63439 100644
@@ -1364,14 +1364,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
        $(call if_changed,objcopy)
 
-#
-# U-Boot entry point, needed for booting of full-blown U-Boot
-# from the SPL U-Boot version.
-#
-ifndef CFG_SYS_UBOOT_START
-CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
-endif
-
 # Boards with more complex image requirements can provide an .its source file
 # or a generator script
 # NOTE: Please do not use this. We are migrating away from Makefile rules to use
@@ -1391,7 +1383,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -p $(CONFIG_FIT_EXTERNAL_OFFSET) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1399,10 +1391,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1433,7 +1425,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
arch/arm/mach-k3/config_secure.mk +1 -1
index 7bc8af813a..9cc1f9eb24 100644
@@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(
        $(call if_changed,mkfitimage)
 
 MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
arch/arm/mach-omap2/config_secure.mk +1 -1
index 24ddcdb961..f76262bb0c 100644
@@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE
 ifdef CONFIG_SPL_LOAD_FIT
 
 MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-       -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
+       -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
        $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
 
boot/Kconfig +0 -0
index 5e2d4286ae..f2f7821cc1 100644
@@ -737,6 +737,22 @@ config TEXT_BASE
        default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
        default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
        hex "Text Base"

boot/Kconfig config TEXT_BASE · line 749

Quoted 10 lines
boot/Kconfig +10 -0
+       help
+         The address in memory that U-Boot will be copied from, initially.
+
+config HAVE_SYS_UBOOT_START
+       bool
+       depends on HAVE_TEXT_BASE
+       prompt "Use custom U-Boot Start"
+       help
+         By default, the address in memory that U-Boot will be copied from(TEXT_BASE) and the
+         entry point are the same. Select this to set a different U-Boot start address.

space after 'from'

Quoted 5 lines

Also this is a little unclear. START means the start address that U-Boot will run from. If it is different from TEXT_BASE, then something loads it here

This could do with a bit more detail.

Yes, it is and why I edited the TEXT_BASE help prompt. I'm not sure how to word that this is where the SPL will start execution after the jump.
TEXT_BASE is where the spl will copy the binary to.

Quoted 11 lines

boot/Kconfig config TEXT_BASE · line 755

Quoted 7 lines
boot/Kconfig +6 -0
+
+config SYS_UBOOT_START
+       hex
+       depends on HAVE_TEXT_BASE
+       default TEXT_BASE
+       prompt "U-Boot entry" if HAVE_SYS_UBOOT_START

Tom:
This is clever, and can be kept. I didn't catch at first that this will do what I was hoping of setting a default, but then allowing for it to be changed.

Quoted 2 lines

Was there another way of doing this? I looked at the docs for a while to figure this out.

This part here is mechanically correct. Just need a slight wording change to the help to better explain what / why one wants to adjust the address. Why are these platforms needing start != text?

Signature · 1 line
Tom