KVM: x86: Add CONFIG_KVM_MAX_NR_VCPUS
PATCH v3 1/1 KVM: x86: Add CONFIG_KVM_MAX_NR_VCPUS
Add a Kconfig entry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled.
---
v2 -> v3: Default KVM_MAX_VCPUS to 1024 when CONFIG_KVM_MAX_NR_VCPUS is not defined. This prevents build failures in arch/x86/events/intel/core.c and drivers/vfio/vfio_main.c when KVM is disabled.
arch/x86/include/asm/kvm_host.h | 4 ++++ arch/x86/kvm/Kconfig | 11 +++++++++++ 2 files changed, 15 insertions(+)
arch/x86/include/asm/kvm_host.h +4 -0
@@ -39,7 +39,11 @@#define __KVM_HAVE_ARCH_VCPU_DEBUGFS +#ifdef CONFIG_KVM_MAX_NR_VCPUS +#define KVM_MAX_VCPUS CONFIG_KVM_MAX_NR_VCPUS +#else #define KVM_MAX_VCPUS 1024 +#endif /* * In x86, the VCPU ID corresponds to the APIC ID, and APIC IDs
arch/x86/kvm/Kconfig +11 -0
@@ -141,4 +141,15 @@ config KVM_XEN config KVM_EXTERNAL_WRITE_TRACKING bool +config KVM_MAX_NR_VCPUS + int "Maximum number of vCPUs per KVM guest" + depends on KVM + range 1024 4096 + default 4096 if MAXSMP + default 1024 + help + Set the maximum number of vCPUs per KVM guest. Larger values will increase + the memory footprint of each KVM guest, regardless of how many vCPUs are + configured. + endif # VIRTUALIZATION
Signature · 1 line
2.26.2
Just a friendly ping.
Sean Christopherson
maintainerQuoted 2 lines · Kyle Meyer
Add a
Kconfigentry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled.
I'd like to capture why the max is set to 4096, both the justification and why we don't want to go further at this point.
If you've no objection, I'll massage the changelog to this when applying:
Add a Kconfig entry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled, as there are use cases that want to create more than the currently allow 1024 vCPUs and are more than happy to eat the memory overhead.
The Hyper-V TLFS doesn't allow more than 64 sparse banks, i.e. allows a maximum of 4096 virtual CPUs. Cap KVM's maximum number of virtual CPUs to 4096 to avoid exceeding Hyper-V's limit as KVM support for Hyper-V is unconditional, and alternatives like dynamically disabling Hyper-V enlightenments that rely on sparse banks would require non-trivial code changes.
Quoted 16 lines
Suggested-by Sean Christopherson <[email protected]>Signed-off-by Kyle Meyer <[email protected]>---
v2 -> v3: DefaultKVM_MAX_VCPUSto 1024 whenCONFIG_KVM_MAX_NR_VCPUSis not defined. This prevents build failures inarch/x86/events/intel/core.canddrivers/vfio/vfio_main.cwhen KVM is disabled.arch/x86/include/asm/kvm_host.h | 4 ++++ arch/x86/kvm/Kconfig | 11 +++++++++++ 2 files changed, 15 insertions(+)arch/x86/include/asm/kvm_host.h +0
-0
arch/x86/include/asm/kvm_host.h line 41
Quoted 3 lines
arch/x86/include/asm/kvm_host.h +0
-0@@ -39,7 +39,11 @@#define __KVM_HAVE_ARCH_VCPU_DEBUGFS
And another thing I'll add if you don't object is a comment to explain that this is purely to play nice with CONFIG_KVM=n. And FWIW, I hope to make this go away
entirely: https://lore.kernel.org/all/[email protected]
/*
* CONFIG_KVM_MAX_NR_VCPUS is defined iff CONFIG_KVM!=n, provide a dummy max if
* KVM is disabled (arbitrarily use default from CONFIG_KVM_MAX_NR_VCPUS). */
Quoted 16 lines
arch/x86/include/asm/kvm_host.h +4
-0+#ifdef CONFIG_KVM_MAX_NR_VCPUS +#define KVM_MAX_VCPUS CONFIG_KVM_MAX_NR_VCPUS +#else #define KVM_MAX_VCPUS 1024 +#endif /* * In x86, the VCPU ID corresponds to the APIC ID, and APIC IDs arch/x86/kvm/Kconfig +0
-0@@ -141,4 +141,15 @@ config KVM_XEN config KVM_EXTERNAL_WRITE_TRACKING bool
arch/x86/kvm/Kconfig config KVM_XEN · line 153
Quoted 10 lines
arch/x86/kvm/Kconfig +10
-0+config KVM_MAX_NR_VCPUS + int "Maximum number of vCPUs per KVM guest" + depends on KVM + range 1024 4096 + default 4096 if MAXSMP + default 1024 + help + Set the maximum number of vCPUs per KVM guest. Larger values will increase + the memory footprint of each KVM guest, regardless of how many vCPUs are + configured.
Last nit, I think the last linke should be like so:
the memory footprint of each KVM guest, regardless of how many vCPUs are created for a given VM.
No need for a v4 unless you object to any of the above, I'm happt to fixup when applying.
Quoted 78 lines
Quoted 2 lines
Add a
Kconfigentry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled.I'd like to capture why the max is set to 4096, both the justification and why we don't want to go further at this point.
If you've no objection, I'll massage the changelog to this when applying:
Add a
Kconfigentry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled, as there are use cases that want to create more than the currently allow 1024 vCPUs and are more than happy to eat the memory overhead.The Hyper-V TLFS doesn't allow more than 64 sparse banks, i.e. allows a maximum of 4096 virtual CPUs. Cap KVM's maximum number of virtual CPUs to 4096 to avoid exceeding Hyper-V's limit as KVM support for Hyper-V is unconditional, and alternatives like dynamically disabling Hyper-V enlightenments that rely on sparse banks would require non-trivial code changes.
Quoted 16 lines
Suggested-by Sean Christopherson <[email protected]>Signed-off-by Kyle Meyer <[email protected]>---
v2 -> v3: DefaultKVM_MAX_VCPUSto 1024 whenCONFIG_KVM_MAX_NR_VCPUSis not defined. This prevents build failures inarch/x86/events/intel/core.canddrivers/vfio/vfio_main.cwhen KVM is disabled.arch/x86/include/asm/kvm_host.h | 4 ++++ arch/x86/kvm/Kconfig | 11 +++++++++++ 2 files changed, 15 insertions(+)arch/x86/include/asm/kvm_host.h +0
-0arch/x86/include/asm/kvm_host.h line 41
Quoted 3 lines
arch/x86/include/asm/kvm_host.h +0
-0@@ -39,7 +39,11 @@#define __KVM_HAVE_ARCH_VCPU_DEBUGFSAnd another thing I'll add if you don't object is a comment to explain that this is purely to play nice with
CONFIG_KVM=n. And FWIW, I hope to make this go away
entirely: https://lore.kernel.org/all/[email protected]/*
*CONFIG_KVM_MAX_NR_VCPUSis defined iff CONFIG_KVM!=n, provide a dummy max if
* KVM is disabled (arbitrarily use default fromCONFIG_KVM_MAX_NR_VCPUS). */Quoted 16 lines
arch/x86/include/asm/kvm_host.h +4
-0+#ifdef CONFIG_KVM_MAX_NR_VCPUS +#define KVM_MAX_VCPUS CONFIG_KVM_MAX_NR_VCPUS +#else #define KVM_MAX_VCPUS 1024 +#endif /* * In x86, the VCPU ID corresponds to the APIC ID, and APIC IDs arch/x86/kvm/Kconfig +0
-0@@ -141,4 +141,15 @@ config KVM_XEN config KVM_EXTERNAL_WRITE_TRACKING boolarch/x86/kvm/Kconfig config KVM_XEN · line 153
Quoted 10 lines
arch/x86/kvm/Kconfig +10
-0+config KVM_MAX_NR_VCPUS + int "Maximum number of vCPUs per KVM guest" + depends on KVM + range 1024 4096 + default 4096 if MAXSMP + default 1024 + help + Set the maximum number of vCPUs per KVM guest. Larger values will increase + the memory footprint of each KVM guest, regardless of how many vCPUs are + configured.Last nit, I think the last linke should be like so:
Quoted 5 lines
the memory footprint of each KVM guest, regardless of how many vCPUs are created for a given VM.
No need for a v4 unless you object to any of the above, I'm happt to fixup when applying.
LGTM. I have no objections to any of those changes. Thank you very much.
Quoted 2 lines · Kyle Meyer
Add a
Kconfigentry to set the maximum number of vCPUs per KVM guest and set the default value to 4096 when MAXSMP is enabled.
Applied to kvm-x86 misc, thanks!
[1/1] KVM: x86: Add CONFIG_KVM_MAX_NR_VCPUS to allow up to 4096 vCPUs
https://github.com/kvm-x86/linux/commit/f10a570b093e