Skip to contentSkip to conversation

ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc

PATCH In review Adam Ford 4 participants 7 messages Aug 27, 2023 – Aug 30, 2023

Subsystems (3)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/3 ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc

The i.MX8MP appears to have the same easrc support as the Nano, so add imx8mp as an option with a fallback to imx8mn.

---
V2: Fixed errors:
['fsl,imx8mn-easrc'] is too short
'fsl,imx8mn-easrc' is not one of ['fsl,imx8mp-easrc']

Documentation/devicetree/bindings/sound/fsl,easrc.yaml +7 -1
index bdde68a1059c..a680d7aff237 100644
@@ -14,7 +14,13 @@ properties:
     pattern: "^easrc@.*"
 
   compatible:
-    const: fsl,imx8mn-easrc
+    oneOf:
+      - enum:
+          - fsl,imx8mn-easrc
+      - items:
+          - enum:
+              - fsl,imx8mp-easrc
+          - const: fsl,imx8mn-easrc
 
   reg:
     maxItems: 1
Signature · 7 lines
2.39.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

PATCH v2 2/3 arm64: dts: imx8mp: Add easrc node

The i.MX8MP has an asynchronous sample rate converter which seems to be the same as what is available on the i.MX8M Nano.

---
V2: No change

arch/arm64/boot/dts/freescale/imx8mp.dtsi +20 -0
index 6f2f50e1639c..79cdd4c066c8 100644
@@ -1453,6 +1453,26 @@ sai7: sai@30c80000 {
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
 				};
+
+				easrc: easrc@30c90000 {
+					compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc";
+					reg = <0x30c90000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate  = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
 			};
 
 			sdma3: dma-controller@30e00000 {
Signature · 7 lines
2.39.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#2 lore raw

PATCH v2 3/3 arm64: dts: imx8mp: Add micfil node

In reply to Adam Ford

The i.MX8MP has a micfil controller which is used for interfacing with a pulse density microphone. Add the node and mark it as disabled by default.

---
V2: No Change

arch/arm64/boot/dts/freescale/imx8mp.dtsi +21 -0
index 79cdd4c066c8..b44851a2f579 100644
@@ -1473,6 +1473,27 @@ easrc: easrc@30c90000 {
 					fsl,asrc-format = <2>;
 					status = "disabled";
 				};
+
+				micfil: audio-controller@30ca0000 {
+					compatible = "fsl,imx8mp-micfil";
+					reg = <0x30ca0000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_ROOT>,
+						 <&clk IMX8MP_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MP_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MP_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
 			};
 
 			sdma3: dma-controller@30e00000 {
Signature · 7 lines
2.39.2


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#3 lore raw

Re: [PATCH V2 3/3] arm64: dts: imx8mp: Add micfil node

Quoted 7 lines · Adam Ford

The i.MX8MP has a micfil controller which is used for interfacing with a pulse density microphone. Add the node and mark it as disabled by default.

---

Nak. I guess I'll Nak myself.

Quoted 11 lines

V2: No Change

arch/arm64/boot/dts/freescale/imx8mp.dtsi +1 -0
index 79cdd4c066c8..b44851a2f579 100644
@@ -1473,6 +1473,27 @@ easrc: easrc@30c90000 {
                                        fsl,asrc-format = <2>;
                                        status = "disabled";
                                };
+

arch/arm64/boot/dts/freescale/imx8mp.dtsi easrc: easrc@30c90000 { · line 1486

Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +10 -0
+                               micfil: audio-controller@30ca0000 {
+                                       compatible = "fsl,imx8mp-micfil";
+                                       reg = <0x30ca0000 0x10000>;
+                                       #sound-dai-cells = <0>;
+                                       interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>,
+                                                <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_ROOT>,

After a bunch of attempts to get this working on real hardware, it turns out that IMX8MP_CLK_AUDIOMIX_PDM_ROOT doesn't really exist. Its real name is IMX8MP_CLK_AUDIOMIX_PDM_SEL. I'll submit a patch to remove this from imx8mp-clock.h and and a V3 of this series to update the clock reference in this node.

Quoted 16 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +10 -1
+                                                <&clk IMX8MP_AUDIO_PLL1_OUT>,
+                                                <&clk IMX8MP_AUDIO_PLL2_OUT>,
+                                                <&clk IMX8MP_CLK_EXT3>;
+                                       clock-names = "ipg_clk", "ipg_clk_app",
+                                                     "pll8k", "pll11k", "clkext3";
+                                       dmas = <&sdma2 24 25 0x80000000>;
+                                       dma-names = "rx";
+                                       status = "disabled";
+                               };
+
                        };
 
                        sdma3: dma-controller@30e00000 {
--

2.39.2

Reviewed-by on v2 1/3
#4 lore raw
In reply to Adam Ford
Quoted 4 lines · Adam Ford

The i.MX8MP appears to have the same easrc support as the Nano, so add imx8mp as an option with a fallback to imx8mn.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Acked-by on v2 1/3
#5 lore raw
In reply to Adam Ford
Quoted 14 lines · Adam Ford

The i.MX8MP appears to have the same easrc support as the Nano, so add imx8mp as an option with a fallback to imx8mn.

---
V2: Fixed errors:
['fsl,imx8mn-easrc'] is too short
'fsl,imx8mn-easrc' is not one of ['fsl,imx8mp-easrc']

Documentation/devicetree/bindings/sound/fsl,easrc.yaml +0 -0
index bdde68a1059c..a680d7aff237 100644

Documentation/devicetree/bindings/sound/fsl,easrc.yaml properties: · line 19

Quoted 7 lines
Documentation/devicetree/bindings/sound/fsl,easrc.yaml +3 -1
@@ -14,7 +14,13 @@ properties:
     pattern: "^easrc@.*"
 
   compatible:
-    const: fsl,imx8mn-easrc
+    oneOf:
+      - enum:
+          - fsl,imx8mn-easrc

This one should probably stay const, no?
Either way,

Thanks,
Conor.

Quoted 10 lines
Documentation/devicetree/bindings/sound/fsl,easrc.yaml +4 -0
+      - items:
+          - enum:
+              - fsl,imx8mp-easrc
+          - const: fsl,imx8mn-easrc
 
   reg:
     maxItems: 1
Signature · 1 line
2.39.2

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

maintainer
#6 lore raw

Re: (subset) [PATCH V2 1/3] ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc

In reply to Adam Ford
Quoted 4 lines · Adam Ford

The i.MX8MP appears to have the same easrc support as the Nano, so add imx8mp as an option with a fallback to imx8mn.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: dt-bindings: fsl_easrc: Add support for imx8mp-easrc

      commit: b5f3cec3159dd28563e5a88096769f7b77272790

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel