selftests/net: mv bpf/nat6to4.c to net folder
Subsystems (4)
PATCH 1/1 selftests/net: mv bpf/nat6to4.c to net folder
From: Hangbin Liu <[email protected]>
commit 3c107f36db06 ("selftests/net: mv bpf/nat6to4.c to net folder") backport this v6.4 commit to v6.1 to fix this error:
error: unable to open output file 'linux/kselftest/net/bpf/nat6to4.o':
'No such file or directory'
There are some issues with the bpf/nat6to4.c building.
1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to kselftest-list file and run by common run_tests.
2. When building the test via make -C tools/testing/selftests/ TARGETS="net", the nat6to4.o will be build in selftests/net/bpf/ folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o. The correct path should be ./bpf/nat6to4.o.
3. If building the test via make -C tools/testing/selftests/ TARGETS="net" install. The nat6to4.o will be installed to kselftest_install/net/ folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o.
To fix the confusing test path, let's just move the nat6to4.c to net folder and build it as TEST_GEN_FILES.
---
tools/testing/selftests/net/Makefile | 50 ++++++++++++++++++-
tools/testing/selftests/net/bpf/Makefile | 14 ------
.../testing/selftests/net/{bpf => }/nat6to4.c | 0
tools/testing/selftests/net/udpgro_frglist.sh | 8 +--
4 files changed, 52 insertions(+), 20 deletions(-)
delete mode 100644 tools/testing/selftests/net/bpf/Makefile
rename tools/testing/selftests/net/{bpf => }/nat6to4.c (100%)tools/testing/selftests/net/Makefile +48 -2
@@ -71,14 +71,60 @@ TEST_GEN_FILES += bind_bhash TEST_GEN_PROGS += sk_bind_sendto_listen TEST_GEN_PROGS += sk_connect_zero_addr TEST_PROGS += test_ingress_egress_chaining.sh +TEST_GEN_FILES += nat6to4.o TEST_FILES := settings include ../lib.mk -include bpf/Makefile - $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread $(OUTPUT)/tcp_inq: LDLIBS += -lpthread $(OUTPUT)/bind_bhash: LDLIBS += -lpthread + +# Rules to generate bpf obj nat6to4.o +CLANG ?= clang +SCRATCH_DIR := $(OUTPUT)/tools +BUILD_DIR := $(SCRATCH_DIR)/build +BPFDIR := $(abspath ../../../lib/bpf) +APIDIR := $(abspath ../../../include/uapi) + +CCINCLUDE += -I../bpf +CCINCLUDE += -I../../../../usr/include/ +CCINCLUDE += -I$(SCRATCH_DIR)/include + +BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a + +MAKE_DIRS := $(BUILD_DIR)/libbpf +$(MAKE_DIRS): + mkdir -p $@ + +# Get Clang's default includes on this system, as opposed to those seen by +# '-target bpf'. This fixes "missing" files on some architectures/distros, +# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc. +# +# Use '-idirafter': Don't interfere with include mechanics except where the +# build would have failed anyways. +define get_sys_includes +$(shell $(1) $(2) -v -E - </dev/null 2>&1 \ + | sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \ +$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}') +endef + +ifneq ($(CROSS_COMPILE),) +CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif + +CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH)) + +$(OUTPUT)/nat6to4.o: nat6to4.c $(BPFOBJ) | $(MAKE_DIRS) + $(CLANG) -O2 -target bpf -c $< $(CCINCLUDE) $(CLANG_SYS_INCLUDES) -o $@ + +$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \ + $(APIDIR)/linux/bpf.h \ + | $(BUILD_DIR)/libbpf + $(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \ + EXTRA_CFLAGS='-g -O0' \ + DESTDIR=$(SCRATCH_DIR) prefix= all install_headers + +EXTRA_CLEAN := $(SCRATCH_DIR)
tools/testing/selftests/net/bpf/Makefile deleted +0 -14
@@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -CLANG ?= clang -CCINCLUDE += -I../../bpf -CCINCLUDE += -I../../../../lib -CCINCLUDE += -I../../../../../usr/include/ - -TEST_CUSTOM_PROGS = $(OUTPUT)/bpf/nat6to4.o -all: $(TEST_CUSTOM_PROGS) - -$(OUTPUT)/%.o: %.c - $(CLANG) -O2 -target bpf -c $< $(CCINCLUDE) -o $@ - -EXTRA_CLEAN := $(TEST_CUSTOM_PROGS)
tools/testing/selftests/net/nat6to4.c renamed from tools/testing/selftests/net/bpf/nat6to4.c +0 -0
tools/testing/selftests/net/udpgro_frglist.sh +4 -4
@@ -40,8 +40,8 @@ run_one() { ip -n "${PEER_NS}" link set veth1 xdp object ${BPF_FILE} section xdp tc -n "${PEER_NS}" qdisc add dev veth1 clsact - tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file ../bpf/nat6to4.o section schedcls/ingress6/nat_6 direct-action - tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file ../bpf/nat6to4.o section schedcls/egress4/snat4 direct-action + tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file nat6to4.o section schedcls/ingress6/nat_6 direct-action + tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file nat6to4.o section schedcls/egress4/snat4 direct-action echo ${rx_args} ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r &
@@ -88,8 +88,8 @@ if [ ! -f ${BPF_FILE} ]; then exit -1 fi -if [ ! -f bpf/nat6to4.o ]; then - echo "Missing nat6to4 helper. Build bpfnat6to4.o selftest first" +if [ ! -f nat6to4.o ]; then + echo "Missing nat6to4 helper. Build bpf nat6to4.o selftest first" exit -1 fi
Signature · 1 line
2.33.8
kernel test robot
build botFYI: kernel test robot notices the stable kernel rule is not satisfied.
Hi,
Thanks for your patch.
FYI: kernel test robot notices the stable kernel rule is not satisfied.
Rule: 'Cc: [email protected]' or 'commit <sha1> upstream.'
Subject: [PATCH 6.1] selftests/net: mv bpf/nat6to4.c to net folder
The check is based on https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
Please ignore this mail if the patch is not relevant for upstream.
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Greg KH
maintainerQuoted 6 lines · Hardik Garg
From: Hangbin Liu <[email protected]>
commit
3c107f36db06("selftests/net: mvbpf/nat6to4.cto net folder") backport this v6.4 commit to v6.1 to fix this error:
error: unable to open output file 'linux/kselftest/net/bpf/nat6to4.o':
'No such file or directory'
Note, this is a 6.3 commit, not 6.4 :)
Now queued up, thanks.
greg k-h