PCI: vmd: Do not change the BIOS Hotplug setting on VMD rootports
Subsystems (3)
Nirmal Patel
maintainerPATCH v4 1/1 PCI: vmd: Do not change the BIOS Hotplug setting on VMD rootports
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
---v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.
--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)
drivers/pci/controller/vmd.c +0 -2
@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;
Signature · 1 line
2.31.1
Lorenzo Pieralisi
maintainerQuoted 36 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-0
drivers/pci/controller/vmd.c static int vmd_alloc_irqs(struct vmd_dev *vmd) · line 705
Quoted 5 lines
drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug;
How is the host bridge probed in the guest if there is no ACPI support ?
I would like to understand this better how this works.
drivers/pci/controller/vmd.c static int vmd_alloc_irqs(struct vmd_dev *vmd) · line 706
Quoted 3 lines
drivers/pci/controller/vmd.c +0
-0vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;
I don't get why *only* the hotplug flag should not be copied. Either you want to preserve them all or none.
I assume the issue is that in the host, the _OSC method is used to probe for flags whereas in the guest you can't rely on it ?
Is there a use case where you *do* want to copy the flags from the root_bridge to the vmd_bridge ?
This does not look solid to me.
Thanks,
Lorenzo
Patel, Nirmal
maintainerQuoted 46 lines · Lorenzo Pieralisi
Quoted 36 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-0drivers/pci/controller/vmd.c static int vmd_alloc_irqs(struct vmd_dev *vmd) · line 705
Quoted 5 lines
drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug;How is the host bridge probed in the guest if there is no ACPI support ?
I would like to understand this better how this works.
Quoted 8 lines
drivers/pci/controller/vmd.c static int vmd_alloc_irqs(struct vmd_dev *vmd) · line 706
Quoted 3 lines
drivers/pci/controller/vmd.c +0
-0vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;I don't get why *only* the hotplug flag should not be copied. Either you want to preserve them all or none.
I assume the issue is that in the host, the
_OSCmethod is used to probe for flags whereas in the guest you can't rely on it ?
Yes. Guest OSes don't have same _OSC implementation as Host OSes.
Quoted 3 lines
Is there a use case where you *do* want to copy the flags from the
root_bridgeto thevmd_bridge?
VMD wasn't dependent on root_bridge flags until this patch.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0e
The solution to this patch could have been either using rate limit for AER or disabling AER from BIOS. I think other flags were added as part of this fix for AER for the same reason you mentioned above. Either put all the flags or nothing. Hotplug is broken in Guest OS after this patch. Is reverting this patch an option?
Thanks
Quoted 5 lines
This does not look solid to me.
Thanks,
Lorenzo
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees vmd_bridge->native_pcie_hotplug as FALSE, and you need it to be TRUE? Currently this is copied from the guest's root_bridge->native_pcie_hotplug, so that must also be FALSE.
I guess the guest sees a fabricated host bridge, which would start with native_pcie_hotplug as TRUE (from pci_init_host_bridge()), and then it must be set to FALSE because the guest _OSC didn't grant ownership to the OS? (The guest dmesg should show this, right?)
In the guest, vmd_enable_domain() allocates a host bridge via pci_create_root_bus(), and that would again start with native_pcie_hotplug as TRUE. It's not an ACPI host bridge, so I don't think we do _OSC negotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS _OSC for the fabricated host bridge should grant ownership of it.
Quoted 25 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1
Patel, Nirmal
maintainerQuoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?
Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)
This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 6 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.
VMD was not dependent on _OSC settings and is not ACPI Host bridge. It became _OSC dependent after the patch 04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0e
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on root_bridge flags from _OSC? Is reverting 04b12ef163d1 a better idea than not allowing just hotplug flags to be copied from root_bridge?
Thanks.
Quoted 4 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.
I will try to check this option.
Quoted 26 lines
Quoted 26 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1
[+cc Kai-Heng, Lorenzo, Rafael]
Quoted 56 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0e
Quoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?
It seems like the question is who owns AER, hotplug, etc for devices below VMD. AER rate limiting sounds itself like a quick fix without addressing the underlying problem.
Quoted 5 lines
Quoted 3 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
On second thought, this doesn't seem right to me. An _OSC method clearly applies to the hierarchy under that device, e.g., if we have a PNP0A03 host bridge with _SEG 0000 and _CRS that includes [bus 00-ff], its _OSC clearly applies to any devices in domain 0000, which in this case would include the VMD bridge.
But I don't think it should apply to the devices *below* the VMD bridge. Those are in a different domain, and if the platform wants to manage AER, hotplug, etc., for those devices, it would have to know some alternate config access method in order to read the AER and hotplug registers. I think that config access depends on the setup done by the VMD driver, so the platform doesn't know that.
By this argument, I would think the guest _OSC would apply to the VMD device itself, but not to the children of the VMD, and the guest could retain the default native control of all these services inside the VMD domain.
But prior to 04b12ef163d1 ("PCI: vmd: Honor ACPI _OSC on PCIe features"), the guest *did* retain native control, so we would have to resolve the issue solved by 04b12ef163d1 in some other way.
Bjorn
Quoted 26 lines
Quoted 25 lines
Quoted 25 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1
Patel, Nirmal
maintainerQuoted 89 lines · Bjorn Helgaas
[+cc Kai-Heng, Lorenzo, Rafael]
Quoted 53 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0eQuoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?It seems like the question is who owns AER, hotplug, etc for devices below VMD. AER rate limiting sounds itself like a quick fix without addressing the underlying problem.
Quoted 4 lines
Quoted 3 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
On second thought, this doesn't seem right to me. An
_OSCmethod clearly applies to the hierarchy under that device, e.g., if we have a PNP0A03 host bridge with_SEG0000 and_CRSthat includes [bus 00-ff], its_OSCclearly applies to any devices in domain 0000, which in this case would include the VMD bridge.But I don't think it should apply to the devices *below* the VMD bridge. Those are in a different domain, and if the platform wants to manage AER, hotplug, etc., for those devices, it would have to know some alternate config access method in order to read the AER and hotplug registers. I think that config access depends on the setup done by the VMD driver, so the platform doesn't know that.
By this argument, I would think the guest
_OSCwould apply to the VMD device itself, but not to the children of the VMD, and the guest could retain the default native control of all these services inside the VMD domain.
Quoted 5 lines
But prior to
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features"), the guest *did* retain native control, so we would have to resolve the issue solved by04b12ef163d1in some other way.Bjorn
Yes, _OSC settings should applied to devices on 0000 domain. VMD creates its own domain to manage the child devices. So it is against the VMD design to force _OSC settings and overwrite VMD settings.
The patch 04b12ef163d1 disables AER on VMD rootports by using BIOS system settings for AER, Hotplug, etc.
The patch 04b12ef163d1 *assumes VMD is a bridge device* and copies and *imposes system settings* for AER, DPC, Hotplug, PM, etc on VMD. Borrowing and applying system settings on VMD rootports is not correct. VMD is *type 0 PCI endpoint device* and all the PCI devices under VMD are *privately* owned by VMD not by the OS. Also VMD has its *own Hotplug settings* for its rootports and child devices in BIOS under VMD settings that are different from BIOS system settings. It is these settings that give VMD its own unique functionality.
For the above reason, VMD driver should disable AER generation by devices it owns. There are two possible solutions.
Possible options to fix: There are two possible solutions.
Options 1: VMD driver disables AER by copying AER BIOS system settings which the patch 04b12ef163d1 does but do not change other settings including Hotplug. The proposed patch does that.
Option 2: Either disable AER by adding an extra BIOS settings under VMD settings or disable AER by Linux VMD driver by adding a boot parameter and remove the patch 04b12ef163d1.
Thanks
nirmal
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1
Quoted 88 lines · Nirmal
Quoted 87 lines · Bjorn Helgaas
Quoted 53 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0eQuoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?It seems like the question is who owns AER, hotplug, etc for devices below VMD. AER rate limiting sounds itself like a quick fix without addressing the underlying problem.
Quoted 4 lines
Quoted 3 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
On second thought, this doesn't seem right to me. An
_OSCmethod clearly applies to the hierarchy under that device, e.g., if we have a PNP0A03 host bridge with_SEG0000 and_CRSthat includes [bus 00-ff], its_OSCclearly applies to any devices in domain 0000, which in this case would include the VMD bridge.But I don't think it should apply to the devices *below* the VMD bridge. Those are in a different domain, and if the platform wants to manage AER, hotplug, etc., for those devices, it would have to know some alternate config access method in order to read the AER and hotplug registers. I think that config access depends on the setup done by the VMD driver, so the platform doesn't know that.
By this argument, I would think the guest
_OSCwould apply to the VMD device itself, but not to the children of the VMD, and the guest could retain the default native control of all these services inside the VMD domain.
Quoted 5 lines
Quoted 3 lines
But prior to
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features"), the guest *did* retain native control, so we would have to resolve the issue solved by04b12ef163d1in some other way.Yes,
_OSCsettings should applied to devices on 0000 domain.
To be careful here, I think a PNP0A03 _OSC applies to the devices in the PNP0A03 hierarchy, which could be any domain, not just 0000.
But I think we agree that devices behind a VMD bridge are in some hierarchy separate from the PNP0A03 one because the PNP0A03 device doesn't tell OSPM how to find things behind the VMD.
Quoted 10 lines
VMD creates its own domain to manage the child devices. So it is against the VMD design to force
_OSCsettings and overwrite VMD settings.The patch
04b12ef163d1disables AER on VMD rootports by using BIOS system settings for AER, Hotplug, etc.
The patch04b12ef163d1*assumes VMD is a bridge device* and copies and *imposes system settings* for AER, DPC, Hotplug, PM, etc on VMD. Borrowing and applying system settings on VMD rootports is not correct.
Yes, agreed, and I think this suggests that we really should remove 04b12ef163d1 ("PCI: vmd: Honor ACPI _OSC on PCIe features") completely.
Quoted 6 lines
VMD is *type 0 PCI endpoint device* and all the PCI devices under VMD are *privately* owned by VMD not by the OS. Also VMD has its *own Hotplug settings* for its rootports and child devices in BIOS under VMD settings that are different from BIOS system settings. It is these settings that give VMD its own unique functionality.
Quoted 8 lines
For the above reason, VMD driver should disable AER generation by devices it owns. There are two possible solutions.
Possible options to fix: There are two possible solutions.
Options 1: VMD driver disables AER by copying AER BIOS system settings which the patch
04b12ef163d1does but do not change other settings including Hotplug. The proposed patch does that.
This doesn't seem right because I don't think we should be applying any _OSC settings to devices below VMD unless there's a PNP0A03 device that describes the domain below VMD.
Quoted 3 lines
Option 2: Either disable AER by adding an extra BIOS settings under VMD settings or disable AER by Linux VMD driver by adding a boot parameter and remove the patch
04b12ef163d1.
I think we should remove 04b12ef163d1 and figure out some other way of handling devices below VMD. Maybe you just hard-code those items to be what you want.
Quoted 26 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1
Quoted 137 lines · Bjorn Helgaas
Quoted 88 lines · Nirmal
Quoted 87 lines · Bjorn Helgaas
Quoted 53 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0eQuoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?It seems like the question is who owns AER, hotplug, etc for devices below VMD. AER rate limiting sounds itself like a quick fix without addressing the underlying problem.
Quoted 4 lines
Quoted 3 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
On second thought, this doesn't seem right to me. An
_OSCmethod clearly applies to the hierarchy under that device, e.g., if we have a PNP0A03 host bridge with_SEG0000 and_CRSthat includes [bus 00-ff], its_OSCclearly applies to any devices in domain 0000, which in this case would include the VMD bridge.But I don't think it should apply to the devices *below* the VMD bridge. Those are in a different domain, and if the platform wants to manage AER, hotplug, etc., for those devices, it would have to know some alternate config access method in order to read the AER and hotplug registers. I think that config access depends on the setup done by the VMD driver, so the platform doesn't know that.
By this argument, I would think the guest
_OSCwould apply to the VMD device itself, but not to the children of the VMD, and the guest could retain the default native control of all these services inside the VMD domain.Quoted 5 lines
Quoted 3 lines
But prior to
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features"), the guest *did* retain native control, so we would have to resolve the issue solved by04b12ef163d1in some other way.Yes,
_OSCsettings should applied to devices on 0000 domain.To be careful here, I think a PNP0A03
_OSCapplies to the devices in the PNP0A03 hierarchy, which could be any domain, not just 0000.But I think we agree that devices behind a VMD bridge are in some hierarchy separate from the PNP0A03 one because the PNP0A03 device doesn't tell OSPM how to find things behind the VMD.
Quoted 10 lines
VMD creates its own domain to manage the child devices. So it is against the VMD design to force
_OSCsettings and overwrite VMD settings.The patch
04b12ef163d1disables AER on VMD rootports by using BIOS system settings for AER, Hotplug, etc.
The patch04b12ef163d1*assumes VMD is a bridge device* and copies and *imposes system settings* for AER, DPC, Hotplug, PM, etc on VMD. Borrowing and applying system settings on VMD rootports is not correct.Yes, agreed, and I think this suggests that we really should remove
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features") completely.Quoted 6 lines
VMD is *type 0 PCI endpoint device* and all the PCI devices under VMD are *privately* owned by VMD not by the OS. Also VMD has its *own Hotplug settings* for its rootports and child devices in BIOS under VMD settings that are different from BIOS system settings. It is these settings that give VMD its own unique functionality.
Quoted 8 lines
For the above reason, VMD driver should disable AER generation by devices it owns. There are two possible solutions.
Possible options to fix: There are two possible solutions.
Options 1: VMD driver disables AER by copying AER BIOS system settings which the patch
04b12ef163d1does but do not change other settings including Hotplug. The proposed patch does that.This doesn't seem right because I don't think we should be applying any
_OSCsettings to devices below VMD unless there's a PNP0A03 device that describes the domain below VMD.
Quoted 7 lines
Quoted 3 lines
Option 2: Either disable AER by adding an extra BIOS settings under VMD settings or disable AER by Linux VMD driver by adding a boot parameter and remove the patch
04b12ef163d1.I think we should remove
04b12ef163d1and figure out some other way of handling devices below VMD. Maybe you just hard-code those items to be what you want.
The idea was that the same physical root ports were used by 0000 domain and VMD domain, so it's reasonable to use the same PCIe services.
So what items should be hard-coded, assuming 04b12ef163d1 gets reverted?
Kai-Heng
Quoted 27 lines
Quoted 27 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Quoted 26 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-3@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr; --2.31.1
Quoted 141 lines · Kai-Heng Feng
Quoted 140 lines · Bjorn Helgaas
Quoted 88 lines · Nirmal
Quoted 87 lines · Bjorn Helgaas
Quoted 53 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0eQuoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?It seems like the question is who owns AER, hotplug, etc for devices below VMD. AER rate limiting sounds itself like a quick fix without addressing the underlying problem.
Quoted 4 lines
Quoted 3 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
On second thought, this doesn't seem right to me. An
_OSCmethod clearly applies to the hierarchy under that device, e.g., if we have a PNP0A03 host bridge with_SEG0000 and_CRSthat includes [bus 00-ff], its_OSCclearly applies to any devices in domain 0000, which in this case would include the VMD bridge.But I don't think it should apply to the devices *below* the VMD bridge. Those are in a different domain, and if the platform wants to manage AER, hotplug, etc., for those devices, it would have to know some alternate config access method in order to read the AER and hotplug registers. I think that config access depends on the setup done by the VMD driver, so the platform doesn't know that.
By this argument, I would think the guest
_OSCwould apply to the VMD device itself, but not to the children of the VMD, and the guest could retain the default native control of all these services inside the VMD domain.Quoted 5 lines
Quoted 3 lines
But prior to
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features"), the guest *did* retain native control, so we would have to resolve the issue solved by04b12ef163d1in some other way.Yes,
_OSCsettings should applied to devices on 0000 domain.To be careful here, I think a PNP0A03
_OSCapplies to the devices in the PNP0A03 hierarchy, which could be any domain, not just 0000.But I think we agree that devices behind a VMD bridge are in some hierarchy separate from the PNP0A03 one because the PNP0A03 device doesn't tell OSPM how to find things behind the VMD.
Quoted 10 lines
VMD creates its own domain to manage the child devices. So it is against the VMD design to force
_OSCsettings and overwrite VMD settings.The patch
04b12ef163d1disables AER on VMD rootports by using BIOS system settings for AER, Hotplug, etc.
The patch04b12ef163d1*assumes VMD is a bridge device* and copies and *imposes system settings* for AER, DPC, Hotplug, PM, etc on VMD. Borrowing and applying system settings on VMD rootports is not correct.Yes, agreed, and I think this suggests that we really should remove
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features") completely.Quoted 6 lines
VMD is *type 0 PCI endpoint device* and all the PCI devices under VMD are *privately* owned by VMD not by the OS. Also VMD has its *own Hotplug settings* for its rootports and child devices in BIOS under VMD settings that are different from BIOS system settings. It is these settings that give VMD its own unique functionality.
Quoted 8 lines
For the above reason, VMD driver should disable AER generation by devices it owns. There are two possible solutions.
Possible options to fix: There are two possible solutions.
Options 1: VMD driver disables AER by copying AER BIOS system settings which the patch
04b12ef163d1does but do not change other settings including Hotplug. The proposed patch does that.This doesn't seem right because I don't think we should be applying any
_OSCsettings to devices below VMD unless there's a PNP0A03 device that describes the domain below VMD.Quoted 3 lines
Option 2: Either disable AER by adding an extra BIOS settings under VMD settings or disable AER by Linux VMD driver by adding a boot parameter and remove the patch
04b12ef163d1.
Quoted 7 lines
Quoted 3 lines
I think we should remove
04b12ef163d1and figure out some other way of handling devices below VMD. Maybe you just hard-code those items to be what you want.The idea was that the same physical root ports were used by 0000 domain and VMD domain, so it's reasonable to use the same PCIe services.
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 28 lines
So what items should be hard-coded, assuming
04b12ef163d1gets reverted?Quoted 26 lines
Quoted 26 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-3@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr; --2.31.1
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]
Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)
Quoted 4 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
Kai-Heng
Quoted 29 lines
Quoted 29 lines
So what items should be hard-coded, assuming
04b12ef163d1gets reverted?Quoted 26 lines
Quoted 26 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-3@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr; --2.31.1
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)
Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMe
So ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 6 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00 _OSC applies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.
E.g., if _OSC negotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.
Nirmal's patch ignores _OSC for hotplug, but keeps the _OSC results for AER, PME, and LTR. I think we should ignore _OSC for *all* of them.
That would mean reverting 04b12ef163d1 ("PCI: vmd: Honor ACPI _OSC on PCIe features") completely, so of course we'd have to figure out how to resolve the AER message flood a different way.
Bjorn
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
static void vmd_copy_host_bridge_flags(struct
pci_host_bridge*root_bridge,
structpci_host_bridge*vmd_bridge)
{(quoted diff) +0
-2- vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;
Quoted 45 lines · Bjorn Helgaas
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 4 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 7 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.
Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.
I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Quoted 7 lines
Nirmal's patch ignores
_OSCfor hotplug, but keeps the_OSCresults for AER, PME, and LTR. I think we should ignore_OSCfor *all* of them.That would mean reverting
04b12ef163d1("PCI: vmd: Honor ACPI_OSCon PCIe features") completely, so of course we'd have to figure out how to resolve the AER message flood a different way.
I agree with the above approach, however.
Quoted 61 lines · Rafael J. Wysocki
Quoted 44 lines · Bjorn Helgaas
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 4 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 7 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.
Quoted 4 lines
I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Domain 10000 definitely isn't physically independent of domain 0000 since all TLPs to/from 10000 traverse the domain 0000 link to the VMD at 0000:00:0e.0.
The platform can access the VMD endpoint (0000:00:0e.0) config space. But I don't think the platform can access config space of anything in domain 10000, which in my mind makes it *logically* independent.
IIUC, config access to anything below the VMD (e.g., domain 10000) is done by the vmd driver itself using BAR 0 of the VMD device (vmd_cfg_addr(), vmd_pci_read(), vmd_pci_write(), see [1]).
Bjorn
Quoted 76 lines · Bjorn Helgaas
Quoted 61 lines · Rafael J. Wysocki
Quoted 44 lines · Bjorn Helgaas
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 4 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 7 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.Quoted 4 lines
I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Domain 10000 definitely isn't physically independent of domain 0000 since all TLPs to/from 10000 traverse the domain 0000 link to the VMD at 0000:00:0e.0.
The platform can access the VMD endpoint (0000:00:0e.0) config space. But I don't think the platform can access config space of anything in domain 10000, which in my mind makes it *logically* independent.
Quoted 5 lines
IIUC, config access to anything below the VMD (e.g., domain 10000) is done by the vmd driver itself using BAR 0 of the VMD device (
vmd_cfg_addr(),vmd_pci_read(),vmd_pci_write(), see [1]).
I know, but the platform firmware may not need to go through the VMD BAR in order to change the configuration of the devices in the "VMD segment".
The question is whether or not the OS should attempt to control the _OSC features on the VMD segment if the firmware has not allowed it to control those features on the primary "parent" segment and the way the config space on the VMD segment is accessed may not be entirely relevant in that respect.
Note that VMD may want to impose additional restrictions on the OS control of those features, but it is not clear to me whether or not it should attempt to override the refusal to grant control of them on the primary host bridge.
Quoted 80 lines · Rafael J. Wysocki
Quoted 79 lines · Bjorn Helgaas
Quoted 61 lines · Rafael J. Wysocki
Quoted 44 lines · Bjorn Helgaas
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 4 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 7 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.Quoted 4 lines
I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Domain 10000 definitely isn't physically independent of domain 0000 since all TLPs to/from 10000 traverse the domain 0000 link to the VMD at 0000:00:0e.0.
The platform can access the VMD endpoint (0000:00:0e.0) config space. But I don't think the platform can access config space of anything in domain 10000, which in my mind makes it *logically* independent.
IIUC, config access to anything below the VMD (e.g., domain 10000) is done by the vmd driver itself using BAR 0 of the VMD device (
vmd_cfg_addr(),vmd_pci_read(),vmd_pci_write(), see [1]).
Quoted 5 lines
Quoted 1 line
I know, but the platform firmware may not need to go through the VMD BAR in order to change the configuration of the devices in the "VMD segment".
I'm assuming that firmware can only access "VMD segment" config space if it has its own VMD driver. It sounds like there might be another way that I don't know about? Is there some way to do things via AML and _REG?
Quoted 5 lines
The question is whether or not the OS should attempt to control the
_OSCfeatures on the VMD segment if the firmware has not allowed it to control those features on the primary "parent" segment and the way the config space on the VMD segment is accessed may not be entirely relevant in that respect.
All these features are managed via config space. I don't know how to interpret "firmware has no way to read the AER Capability of a Root Port in the VMD segment, but firmware still owns AER". That sounds to me like "nobody can do anything with AER".
Quoted 4 lines
Note that VMD may want to impose additional restrictions on the OS control of those features, but it is not clear to me whether or not it should attempt to override the refusal to grant control of them on the primary host bridge.
In practical terms, I think you're saying vmd_copy_host_bridge_flags() could CLEAR vmd_bridge->native_* flags (i.e., restrict the OS from using features even if the platform has granted control of them), but it's not clear that it should SET them (i.e., override platform's refusal to grant control)? Is that right?
I've been assuming config space access is the critical piece, but it sounds like maybe it's not?
Bjorn
Quoted 84 lines · Bjorn Helgaas
Quoted 82 lines · Rafael J. Wysocki
Quoted 80 lines · Bjorn Helgaas
Quoted 61 lines · Rafael J. Wysocki
Quoted 44 lines · Bjorn Helgaas
Quoted 15 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 4 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 7 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.Quoted 4 lines
I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Domain 10000 definitely isn't physically independent of domain 0000 since all TLPs to/from 10000 traverse the domain 0000 link to the VMD at 0000:00:0e.0.
The platform can access the VMD endpoint (0000:00:0e.0) config space. But I don't think the platform can access config space of anything in domain 10000, which in my mind makes it *logically* independent.
IIUC, config access to anything below the VMD (e.g., domain 10000) is done by the vmd driver itself using BAR 0 of the VMD device (
vmd_cfg_addr(),vmd_pci_read(),vmd_pci_write(), see [1]).
Quoted 8 lines
Quoted 3 lines
I know, but the platform firmware may not need to go through the VMD BAR in order to change the configuration of the devices in the "VMD segment".
I'm assuming that firmware can only access "VMD segment" config space if it has its own VMD driver. It sounds like there might be another way that I don't know about? Is there some way to do things via AML and
_REG?
I would need to ask the VMD people about this TBH.
Quoted 7 lines
Quoted 5 lines
The question is whether or not the OS should attempt to control the
_OSCfeatures on the VMD segment if the firmware has not allowed it to control those features on the primary "parent" segment and the way the config space on the VMD segment is accessed may not be entirely relevant in that respect.All these features are managed via config space.
As far as the OS is concerned.
Quoted 4 lines
I don't know how to
interpret "firmware has no way to read the AER Capability of a Root Port in the VMD segment, but firmware still owns AER". That sounds to me like "nobody can do anything with AER".
This assumes that the config space access method used by Linux is the only one available, but I'm not sure that this is the case. It would be nice if someone could confirm or deny this. Nirmal?
Also, I know for a fact that the firmware running on certain tiny cores included in the SoC may talk to the PCI devices on it via I2C or similar (at least on servers). This communication channel can be used to control the features in question AFAICS.
Quoted 10 lines
Quoted 4 lines
Note that VMD may want to impose additional restrictions on the OS control of those features, but it is not clear to me whether or not it should attempt to override the refusal to grant control of them on the primary host bridge.
In practical terms, I think you're saying
vmd_copy_host_bridge_flags()could CLEAR vmd_bridge->native_* flags (i.e., restrict the OS from using features even if the platform has granted control of them), but it's not clear that it should SET them (i.e., override platform's refusal to grant control)? Is that right?
Yes, it is.
Quoted 2 lines
I've been assuming config space access is the critical piece, but it sounds like maybe it's not?
It may not be in principle, so it would be good to have more information regarding this. I would like the VMD people to tell us what exactly the expectations are.
Patel, Nirmal
maintainerQuoted 76 lines · Rafael J. Wysocki
Quoted 75 lines · Bjorn Helgaas
Quoted 74 lines · Rafael J. Wysocki
Quoted 73 lines · Bjorn Helgaas
Quoted 51 lines · Rafael J. Wysocki
Quoted 41 lines · Bjorn Helgaas
Quoted 14 lines · Kai-Heng Feng
On Wed, Sep 13, 2023 at 8:50 PM Bjorn Helgaas <[email protected]> wrote:
[snipped]Quoted 10 lines
Hmm. In some ways the VMD device acts as a Root Port, since it originates a new hierarchy in a separate domain, but on the upstream side, it's just a normal endpoint.
How does AER for the new hierarchy work? A device below the VMD can generate ERR_COR/ERR_NONFATAL/ERR_FATAL messages. I guess I was assuming those messages would terminate at the VMD, and the VMD could generate an AER interrupt just like a Root Port. But that can't be right because I don't think VMD would have the Root Error Command register needed to manage that interrupt.
VMD itself doesn't seem to manage AER, the rootport that "moved" from 0000 domain does:
Quoted 7 lines
[ 2113.507345] pcieport 10000:e0:06.0: AER: Corrected error received: 10000:e1:00.0 [ 2113.507380] nvme 10000:e1:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 2113.507389] nvme 10000:e1:00.0: device [144d:a80a] error status/mask=00000001/0000e000 [ 2113.507398] nvme 10000:e1:00.0: [ 0] RxErr (First)Oh, I forgot how VMD works. It sounds like there *is* a Root Port that is logically below the VMD, e.g., (from
https://bugzilla.kernel.org/show_bug.cgi?id=215027):ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0])
acpi PNP0A08:00:_OSC: platform does not support [AER]
acpi PNP0A08:00:_OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
pci 0000:00:0e.0: [8086:467f] type 00 # VMD
vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
pci 10000:e0:06.0: [8086:464d] type 01 # Root Port to [bus e1]
pci 10000:e1:00.0: [144d:a80a] type 00 # Samsung NVMeSo ERR_* messages from the e1:00.0 Samsung device would terminate at the e0:06.0 Root Port. That Root Port has an AER Capability with Root Error Command/Status/Error Source registers.
Quoted 3 lines
Quoted 3 lines
But if VMD just passes those messages up to the Root Port, the source of the messages (the Requester ID) won't make any sense because they're in a hierarchy the Root Port doesn't know anything about.
Quoted 6 lines
Quoted 2 lines
Not sure what's current status is but I think Nirmal's patch is valid for both our cases.
So I think the question is whether that PNP0A08:00
_OSCapplies to domain 10000. I think the answer is "no" because the platform doesn't know about the existence of domain 10000, and it can't access config space in that domain.Well, the VMD device itself is there in domain 0000, however, and sure enough, the platform firmware can access its config space.
Quoted 8 lines
Quoted 4 lines
E.g., if
_OSCnegotiated that the platform owned AER in domain 0000, I don't think it would make sense for that to mean the platform *also* owned AER in domain 10000, because the platform doesn't know how to configure AER or handle AER interrupts in that domain.I'm not sure about this.
AFAICS, domain 10000 is not physically independent of domain 0000, so I'm not sure to what extent the above applies.
Domain 10000 definitely isn't physically independent of domain 0000 since all TLPs to/from 10000 traverse the domain 0000 link to the VMD at 0000:00:0e.0.
The platform can access the VMD endpoint (0000:00:0e.0) config space. But I don't think the platform can access config space of anything in domain 10000, which in my mind makes it *logically* independent.
IIUC, config access to anything below the VMD (e.g., domain 10000) is done by the vmd driver itself using BAR 0 of the VMD device (
vmd_cfg_addr(),vmd_pci_read(),vmd_pci_write(), see [1]).
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
I know, but the platform firmware may not need to go through the VMD BAR in order to change the configuration of the devices in the "VMD segment".
I'm assuming that firmware can only access "VMD segment" config space if it has its own VMD driver. It sounds like there might be another way that I don't know about? Is there some way to do things via AML and
_REG?I would need to ask the VMD people about this TBH.
Sorry for the previous message!
Once VMD is enabled from the BIOS, entire PCI tree behind VMD is owned and managed by UEFI VMD driver. So 10000 domain is owned by VMD Linux driver after boot up.
The entire PCI topology behind VMD is mapped into a memory whose address is programmed in BAR0/1 of VMD endpoint. Any config access to rootports or NVMe behind VMD is an MMIO access.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
The question is whether or not the OS should attempt to control the
_OSCfeatures on the VMD segment if the firmware has not allowed it to control those features on the primary "parent" segment and the way the config space on the VMD segment is accessed may not be entirely relevant in that respect.
I agree. The way the config space on VMD segment is accessed may not be important. Since we have the question of ownership of VMD domain.
When firmware disables native_aer support, the VMD driver doesn't know about it. We can verify this by looking at difference in values of native_aer for VMD host_bridge and VMD root_bridge. (i.e. vmd_copy_host_bridge_flags)
OS needs to make VMD driver aware if AER is enabled or disabled by the firmware.
We should also consider the case of VM.
VM firmware is not aware of VMD or VMD Hotplug support. Host firmware needs to provide a way to pass the Hotplug settings to VM firmware but it is not possible at the moment as VM firmware doesn't know about VMD.
Also another impact of _OSC ownership of VMD domain for all the settings is that the VMD Hotplug setting from BIOS becomes irrelevant. BIOS allows enabling and disabling of Hotplug on VMD's rootports from BIOS menu but it doesn't allow enabling or disabling of AER, PM, DPC, etc.
Quoted 20 lines
Quoted 1 line
All these features are managed via config space.
As far as the OS is concerned.
Quoted 4 lines
I don't know how to
interpret "firmware has no way to read the AER Capability of a Root Port in the VMD segment, but firmware still owns AER". That sounds to me like "nobody can do anything with AER".This assumes that the config space access method used by Linux is the only one available, but I'm not sure that this is the case. It would be nice if someone could confirm or deny this. Nirmal?
Also, I know for a fact that the firmware running on certain tiny cores included in the SoC may talk to the PCI devices on it via I2C or similar (at least on servers). This communication channel can be used to control the features in question AFAICS.
Quoted 4 lines
Quoted 4 lines
Note that VMD may want to impose additional restrictions on the OS control of those features, but it is not clear to me whether or not it should attempt to override the refusal to grant control of them on the primary host bridge.
Quoted 6 lines
Quoted 5 lines
In practical terms, I think you're saying
vmd_copy_host_bridge_flags()could CLEAR vmd_bridge->native_* flags (i.e., restrict the OS from using features even if the platform has granted control of them), but it's not clear that it should SET them (i.e., override platform's refusal to grant control)? Is that right?Yes, it is.
That may be true for host but in case of VM where VM BIOS is disabling everything and setting them to default power off state.
Since VMD driver doesn't know if native_aer is enabled or disabled on the platform by the firmware, we should keep using vmd_copy_host_bridge_flags to get native_aer settings.
I can think of two approaches at the moment that can solve our issue.
Option #1: Keep the proposed changes.
Option #2: Keep the patch 04b12ef163d1 and find a way to set Hotplug for VMD in VM. One way to do is to read Hotplug capable bit in SltCap as defined in PCI specs and enable or disable native_hotplug based on that value.
For more information.
Since VMD Linux driver doesn't have independent AER handling, it should honor the platform or _OSC AER settings. Before the patch 04b12ef163d1, AER was getting enabled on its VMD rootports when VMD driver makes call to pci_create_root_bus -> pci_alloc_host_bridge -> pci_init_host_bridge. see [1]
[1] https://elixir.bootlin.com/linux/latest/C/ident/pci_init_host_bridge
Quoted 6 lines
Quoted 3 lines
I've been assuming config space access is the critical piece, but it sounds like maybe it's not?
It may not be in principle, so it would be good to have more information regarding this. I would like the VMD people to tell us what exactly the expectations are.
Lorenzo Pieralisi
maintainerQuoted 27 lines · Nirmal
Quoted 26 lines · Bjorn Helgaas
Quoted 18 lines · Nirmal Patel
Currently during Host boot up, VMD UEFI driver loads and configures all the VMD endpoints devices and devices behind VMD. Then during VMD rootport creation, VMD driver honors ACPI settings for Hotplug, AER, DPC, PM and enables these features based on BIOS settings.
During the Guest boot up, ACPI settings along with VMD UEFI driver are not present in Guest BIOS which results in assigning default values to Hotplug, AER, DPC, etc. As a result hotplug is disabled on the VMD rootports in the Guest OS.
VMD driver in Guest should be able to see the same settings as seen by Host VMD driver. Because of the missing implementation of VMD UEFI driver in Guest BIOS, the Hotplug is disabled on VMD rootport in Guest OS. Hot inserted drives don't show up and hot removed drives do not disappear even if VMD supports Hotplug in Guest. This behavior is observed in various combinations of guest OSes i.e. RHEL, SLES and hypervisors i.e. KVM and ESXI.
Quoted 3 lines
This change will make the VMD Host and Guest Driver to keep the settings implemented by the UEFI VMD DXE driver and thus honoring the user selections for hotplug in the BIOS.
These settings are negotiated between the OS and the BIOS. The guest runs a different BIOS than the host, so why should the guest setting be related to the host setting?
Quoted 7 lines
Quoted 5 lines
I'm not a virtualization whiz, and I don't understand all of what's going on here, so please correct me when I go wrong:
IIUC you need to change the guest behavior. The guest currently sees
vmd_bridge->native_pcie_hotplugas FALSE, and you need it to be TRUE?Correct.
Why ? Can you explain to us please what the bug is ?
It is clear that "hotplug is broken in the guest" is not enough to fix this sensibly.
Quoted 10 lines
Quoted 7 lines
Currently this is copied from the guest's
root_bridge->native_pcie_hotplug, so that must also be FALSE.I guess the guest sees a fabricated host bridge, which would start with
native_pcie_hotplugas TRUE (frompci_init_host_bridge()), and then it must be set to FALSE because the guest_OSCdidn't grant ownership to the OS? (The guest dmesg should show this, right?)This is my understanding too. I don't know much in detail about Guest expectation.
What clears native_pcie_hotplug in the guest (if it does not have ACPI firmware and therefore no _OSC negotiation) ?
Quoted 10 lines
Quoted 5 lines
In the guest,
vmd_enable_domain()allocates a host bridge viapci_create_root_bus(), and that would again start withnative_pcie_hotplugas TRUE. It's not an ACPI host bridge, so I don't think we do_OSCnegotiation for it. After this patch removes the copy from the fabricated host bridge, it would be left as TRUE.VMD was not dependent on
_OSCsettings and is not ACPI Host bridge. It became_OSCdependent after the patch04b12ef163d1.
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/drivers/pci/controller/vmd.c?id=04b12ef163d10e348db664900ae7f611b83c7a0e
Quoted 7 lines
This patch was added as a quick fix for AER flooding but it could have been avoided by using rate limit for AER.
I don't know all the history of VMD driver but does it have to be dependent on
root_bridgeflags from_OSC? Is reverting04b12ef163d1a better idea than not allowing just hotplug flags to be copied fromroot_bridge?
No, a better idea is to understand what the bug is and fix it for good.
So we are back to the drawing board to define how the host bridge driver works in the host and in the guest to understand how hardware is configured and what do we expect from it.
Thanks,
Lorenzo
Quoted 37 lines
Thanks.
Quoted 4 lines
If this is on track, it seems like if we want the guest to own PCIe hotplug, the guest BIOS
_OSCfor the fabricated host bridge should grant ownership of it.I will try to check this option.
Quoted 26 lines
Quoted 26 lines
Signed-off-by Nirmal Patel <[email protected]>---
v3->v4: Rewrite the commit log.v2->v3: Update the commit log.v1->v2: Update the commit log.--- drivers/pci/controller/vmd.c | 2 -- 1 file changed, 2 deletions(-)drivers/pci/controller/vmd.c +0
-2@@ -701,8 +701,6 @@ static int vmd_alloc_irqs(struct vmd_dev *vmd)static void vmd_copy_host_bridge_flags (struct pci_host_bridge *root_bridge,struct pci_host_bridge *vmd_bridge) { - vmd_bridge->native_pcie_hotplug = root_bridge->native_pcie_hotplug; - vmd_bridge->native_shpc_hotplug = root_bridge->native_shpc_hotplug; vmd_bridge->native_aer = root_bridge->native_aer; vmd_bridge->native_pme = root_bridge->native_pme; vmd_bridge->native_ltr = root_bridge->native_ltr;Signature · 1 line
2.31.1