dt-bindings: thermal-zones: Document critical-action

index 2b6bb593be5b..b6d59c7a3377 100644
@@ -174,7 +174,16 @@ void ctrl_alt_del(void);
 
 extern void orderly_poweroff(bool force);
 extern void orderly_reboot(void);
-void hw_protection_shutdown(const char *reason, int ms_until_forced);
+void __hw_protection_shutdown(const char *reason, int ms_until_forced, bool shutdown);
+static inline void hw_protection_reboot(const char *reason, int ms_until_forced)
+{
+	__hw_protection_shutdown(reason, ms_until_forced, false);
+}
+
+static inline void hw_protection_shutdown(const char *reason, int ms_until_forced)
+{
+	__hw_protection_shutdown(reason, ms_until_forced, true);
+}
 
 /*
  * Emergency restart, callable from an interrupt handler.

index 3bba88c7ffc6..76fa6e9e4f1d 100644
@@ -953,21 +953,25 @@ static void hw_failure_emergency_poweroff(int poweroff_delay_ms)
 }
 
 /**
- * hw_protection_shutdown - Trigger an emergency system poweroff
+ * __hw_protection_shutdown - Trigger an emergency system shutdown or reboot
  *
- * @reason:		Reason of emergency shutdown to be printed.
- * @ms_until_forced:	Time to wait for orderly shutdown before tiggering a
- *			forced shudown. Negative value disables the forced
- *			shutdown.
+ * @reason:		Reason of emergency shutdown or reboot to be printed.
+ * @ms_until_forced:	Time to wait for orderly shutdown or reboot before
+ *			triggering it. Negative value disables the forced
+ *			shutdown or reboot.
+ * @shutdown:		If true, indicates that a shutdown will happen
+ *			after the critical tempeature is reached.
+ *			If false, indicates that a reboot will happen
+ *			after the critical tempeature is reached.
  *
- * Initiate an emergency system shutdown in order to protect hardware from
- * further damage. Usage examples include a thermal protection or a voltage or
- * current regulator failures.
- * NOTE: The request is ignored if protection shutdown is already pending even
- * if the previous request has given a large timeout for forced shutdown.
+ * Initiate an emergency system shutdown or reboot in order to protect
+ * hardware from further damage. Usage examples include a thermal protection.
+ * NOTE: The request is ignored if protection shutdown or reboot is already
+ * pending even if the previous request has given a large timeout for forced
+ * shutdown/reboot.
  * Can be called from any context.
  */
-void hw_protection_shutdown(const char *reason, int ms_until_forced)
+void __hw_protection_shutdown(const char *reason, int ms_until_forced, bool shutdown)
 {
 	static atomic_t allow_proceed = ATOMIC_INIT(1);
 

@@ -982,9 +986,12 @@ void hw_protection_shutdown(const char *reason, int ms_until_forced)
 	 * orderly_poweroff failure
 	 */
 	hw_failure_emergency_poweroff(ms_until_forced);
-	orderly_poweroff(true);
+	if (shutdown)
+		orderly_poweroff(true);
+	else
+		orderly_reboot();
 }
-EXPORT_SYMBOL_GPL(hw_protection_shutdown);
+EXPORT_SYMBOL_GPL(__hw_protection_shutdown);
 
 static int __init reboot_setup(char *str)
 {

index a59700593d32..062114608667 100644
@@ -320,11 +320,15 @@ void thermal_zone_device_critical(struct thermal_zone_device *tz)
 	 * Its a must for forced_emergency_poweroff_work to be scheduled.
 	 */
 	int poweroff_delay_ms = CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS;
+	static const char *msg = "Temperature too high";
 
 	dev_emerg(&tz->device, "%s: critical temperature reached, "
 		  "shutting down\n", tz->type);
 
-	hw_protection_shutdown("Temperature too high", poweroff_delay_ms);
+	if (tz->action == THERMAL_CRITICAL_ACTION_REBOOT)
+		hw_protection_reboot(msg, poweroff_delay_ms);
+	else
+		hw_protection_shutdown(msg, poweroff_delay_ms);
 }
 EXPORT_SYMBOL(thermal_zone_device_critical);
 

index 4ca905723429..a644a896a617 100644
@@ -218,6 +218,25 @@ static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 	return tz;
 }
 
+static const char * const critical_actions[] = {
+	[THERMAL_CRITICAL_ACTION_SHUTDOWN]	= "shutdown",
+	[THERMAL_CRITICAL_ACTION_REBOOT]	= "reboot",
+};
+
+static void thermal_of_get_critical_action(struct device_node *np,
+					   enum thermal_action *action)
+{
+	const char *action_string;
+	int ret;
+
+	ret = of_property_read_string(np, "critical-action", &action_string);
+	if (ret < 0)
+		*action = THERMAL_CRITICAL_ACTION_SHUTDOWN;
+
+	if (!strcasecmp(action_string, "reboot"))
+		*action = THERMAL_CRITICAL_ACTION_REBOOT;
+}
+
 static int thermal_of_monitor_init(struct device_node *np, int *delay, int *pdelay)
 {
 	int ret;

@@ -516,6 +535,8 @@ static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
 		goto out_kfree_trips;
 	}
 
+	thermal_of_get_critical_action(np, &tz->action);
+
 	ret = thermal_zone_device_enable(tz);
 	if (ret) {
 		pr_err("Failed to enabled thermal zone '%s', id=%d: %d\n",

index b449a46766f5..b68e5734823d 100644
@@ -34,6 +34,11 @@ struct thermal_cooling_device;
 struct thermal_instance;
 struct thermal_attr;
 
+enum thermal_action {
+	THERMAL_CRITICAL_ACTION_SHUTDOWN = 0, /* shutdown when crit temperature is reached */
+	THERMAL_CRITICAL_ACTION_REBOOT, /* reboot when crit temperature is reached */
+};
+
 enum thermal_trend {
 	THERMAL_TREND_STABLE, /* temperature is stable */
 	THERMAL_TREND_RAISING, /* temperature is raising */

@@ -187,6 +192,7 @@ struct thermal_zone_device {
 	struct list_head node;
 	struct delayed_work poll_queue;
 	enum thermal_notify_event notify_event;
+	enum thermal_action action;
 };
 
 /**