ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
PATCH 1/2 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects. Without this change, the board will fail to suspend/resume e.g. in Linux.
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
--- configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mm_data_modul_edm_sbc_defconfig +0 -1
@@ -157,7 +157,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y -CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 CONFIG_DFU_TFTP=y CONFIG_DFU_TIMEOUT=y CONFIG_DFU_MMC=y
Signature · 1 line
2.40.1
PATCH 2/2 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC
Use default SAVED_DRAM_TIMING_BASE as that is what upstream TFA expects. Without this change, the board will fail to suspend/resume e.g. in Linux.
---
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
--- configs/imx8mp_data_modul_edm_sbc_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/imx8mp_data_modul_edm_sbc_defconfig +0 -1
@@ -164,7 +164,6 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MP=y CONFIG_CLK_IMX8MP=y -CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000 CONFIG_DFU_TFTP=y CONFIG_DFU_TIMEOUT=y CONFIG_DFU_MMC=y
Signature · 1 line
2.40.1
PATCH 2/2 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Plus eDM SBC
Quoted 3 lines
Use default
SAVED_DRAM_TIMING_BASEas that is what upstream TFA expects. Without this change, the board will fail to suspend/resume e.g. in Linux.Signed-off-by Marek Vasut <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
PATCH 1/2 ARM: imx: Use default SAVED_DRAM_TIMING_BASE on Data Modul i.MX8M Mini eDM SBC
In reply to Marek VasutQuoted 3 lines
Use default
SAVED_DRAM_TIMING_BASEas that is what upstream TFA expects. Without this change, the board will fail to suspend/resume e.g. in Linux.Signed-off-by Marek Vasut <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================