FAILED: patch "[PATCH] usb: typec: tcpci: clear the fault status bit" failed to apply to 5.10-stable tree

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 23e60c8daf5ec2ab1b731310761b668745fcf6ed
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023090315-composure-handbook-a344@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

23e60c8daf5e ("usb: typec: tcpci: clear the fault status bit")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 23e60c8daf5ec2ab1b731310761b668745fcf6ed Mon Sep 17 00:00:00 2001
From: Marco Felsch <[email protected]>
Date: Wed, 16 Aug 2023 14:25:02 -0300
Subject: [PATCH] usb: typec: tcpci: clear the fault status bit

According the "USB Type-C Port Controller Interface Specification v2.0" the TCPC sets the fault status register bit-7 (AllRegistersResetToDefault) once the registers have been reset to their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the fault-irq, which may cause a kernel hang. Fix this generically by writing a one to the corresponding bit-7.

index fc708c289a73..0ee3e6e29bb1 100644
@@ -602,6 +602,10 @@ static int tcpci_init(struct tcpc_dev *tcpc)
 	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;
 
+	ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
+	if (ret < 0)
+		return ret;
+
 	/* Handle vendor init */
 	if (tcpci->data->init) {
 		ret = tcpci->data->init(tcpci, tcpci->data);

index 85e95a3251d3..83376473ac76 100644
@@ -103,6 +103,7 @@
 #define TCPC_POWER_STATUS_SINKING_VBUS	BIT(0)
 
 #define TCPC_FAULT_STATUS		0x1f
+#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
 
 #define TCPC_ALERT_EXTENDED		0x21