Skip to contentSkip to conversation

bus: ti-sysc: Fix missing AM35xx SoC matching

PATCH Applied Adam Ford 2 participants 2 messages Sep 6, 2023 – Sep 13, 2023 OMAP2+ support

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/1 bus: ti-sysc: Fix missing AM35xx SoC matching

Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two errors:

ti-sysc: probe of 48318000.target-module failed with error -16
ti-sysc: probe of 49032000.target-module failed with error -16

Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear.

Fixes a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
drivers/bus/ti-sysc.c +4 -2
index eb4e7bee1e20..42c12df07cea 100644
@@ -38,6 +38,7 @@ enum sysc_soc {
 	SOC_2420,
 	SOC_2430,
 	SOC_3430,
+	SOC_AM35,
 	SOC_3630,
 	SOC_4430,
 	SOC_4460,
@@ -1862,7 +1863,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 		dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n",
 			 __func__, val, irq_mask);
 
-	if (sysc_soc->soc == SOC_3430) {
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) {
 		/* Clear DSS_SDI_CONTROL */
 		sysc_write(ddata, 0x44, 0);
 
@@ -3025,6 +3026,7 @@ static void ti_sysc_idle(struct work_struct *work)
 static const struct soc_device_attribute sysc_soc_match[] = {
 	SOC_FLAG("OMAP242*", SOC_2420),
 	SOC_FLAG("OMAP243*", SOC_2430),
+	SOC_FLAG("AM35*", SOC_AM35),
 	SOC_FLAG("OMAP3[45]*", SOC_3430),
 	SOC_FLAG("OMAP3[67]*", SOC_3630),
 	SOC_FLAG("OMAP443*", SOC_4430),
@@ -3229,7 +3231,7 @@ static int sysc_check_active_timer(struct sysc *ddata)
 	 * can be dropped if we stop supporting old beagleboard revisions
 	 * A to B4 at some point.
 	 */
-	if (sysc_soc->soc == SOC_3430)
+	if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35)
 		error = -ENXIO;
 	else
 		error = -EBUSY;
Signature · 1 line
2.39.2
maintainer Applied
#1 lore raw
Quoted 18 lines · Adam Ford

Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families.

The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed.

The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430.

This caused a regression on the AM3517 causing it to return two errors:

ti-sysc: probe of 48318000.target-module failed with error -16
ti-sysc: probe of 49032000.target-module failed with error -16

Quoted 7 lines

Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear.

Fixes a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific")
Fixes feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")

Applied into fixes now, thanks

Tony