arm64: dts: imx8-ss-lsio: Remove unused clock
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/7 arm64: dts: imx8-ss-lsio: Remove unused clock
From: Fabio Estevam <[email protected]>
The lsio_mem_clk is not used anywhere, so simply remove it.
--- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 7 ------- 1 file changed, 7 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +0 -7
@@ -14,13 +14,6 @@ lsio_subsys: bus@5d000000 { ranges = <0x5d000000 0x0 0x5d000000 0x1000000>, <0x08000000 0x0 0x08000000 0x10000000>; - lsio_mem_clk: clock-lsio-mem { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "lsio_mem_clk"; - }; - lsio_bus_clk: clock-lsio-bus { compatible = "fixed-clock"; #clock-cells = <0>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 2/7 arm64: dts: imx8-ss-lsio: Move lsio_bus_clk outside of soc
From: Fabio Estevam <[email protected]>
The lsio_bus_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +7 -7
@@ -7,6 +7,13 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +lsio_bus_clk: clock-lsio-bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "lsio_bus_clk"; +}; + lsio_subsys: bus@5d000000 { compatible = "simple-bus"; #address-cells = <1>;
@@ -14,13 +21,6 @@ lsio_subsys: bus@5d000000 { ranges = <0x5d000000 0x0 0x5d000000 0x1000000>, <0x08000000 0x0 0x08000000 0x10000000>; - lsio_bus_clk: clock-lsio-bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-output-names = "lsio_bus_clk"; - }; - lsio_pwm0: pwm@5d000000 { compatible = "fsl,imx27-pwm"; reg = <0x5d000000 0x10000>;
Signature · 6 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 3/7 arm64: dts: imx8-ss-dma: Move dma_ipg_clk outside of soc
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The dma_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +7 -7
@@ -7,19 +7,19 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +dma_ipg_clk: clock-dma-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "dma_ipg_clk"; +}; + dma_subsys: bus@5a000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5a000000 0x0 0x5a000000 0x1000000>; - dma_ipg_clk: clock-dma-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <120000000>; - clock-output-names = "dma_ipg_clk"; - }; - lpspi0: spi@5a000000 { compatible = "fsl,imx7ulp-spi"; reg = <0x5a000000 0x10000>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 4/7 arm64: dts: imx8-ss-conn: Move conn clocks outside of soc
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The conn clock nodes do not have any register associated with it, so they should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- .../boot/dts/freescale/imx8-ss-conn.dtsi | 42 +++++++++---------- 1 file changed, 21 insertions(+), 21 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +21 -21
@@ -7,33 +7,33 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +conn_axi_clk: clock-conn-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333333333>; + clock-output-names = "conn_axi_clk"; +}; + +conn_ahb_clk: clock-conn-ahb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <166666666>; + clock-output-names = "conn_ahb_clk"; +}; + +conn_ipg_clk: clock-conn-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <83333333>; + clock-output-names = "conn_ipg_clk"; +}; + conn_subsys: bus@5b000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; - conn_axi_clk: clock-conn-axi { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <333333333>; - clock-output-names = "conn_axi_clk"; - }; - - conn_ahb_clk: clock-conn-ahb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <166666666>; - clock-output-names = "conn_ahb_clk"; - }; - - conn_ipg_clk: clock-conn-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <83333333>; - clock-output-names = "conn_ipg_clk"; - }; - usbotg1: usb@5b0d0000 { compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb"; reg = <0x5b0d0000 0x200>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 5/7 arm64: dts: imx8-ss-img: Move img_ipg_clk outside of soc
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The img_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi +7 -7
@@ -3,19 +3,19 @@ * Copyright 2019-2021 NXP * Zhou Guoniu <[email protected]> */ +img_ipg_clk: clock-img-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "img_ipg_clk"; +}; + img_subsys: bus@58000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x58000000 0x0 0x58000000 0x1000000>; - img_ipg_clk: clock-img-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - clock-output-names = "img_ipg_clk"; - }; - jpegdec: jpegdec@58400000 { reg = <0x58400000 0x00050000>; interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 6/7 arm64: dts: imx8-ss-audio: Move audio_ipg_clk outside of soc
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The audio_ipg_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +7 -7
@@ -7,19 +7,19 @@ #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/firmware/imx/rsrc.h> +audio_ipg_clk: clock-audio-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <120000000>; + clock-output-names = "audio_ipg_clk"; +}; + audio_subsys: bus@59000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x59000000 0x0 0x59000000 0x1000000>; - audio_ipg_clk: clock-audio-ipg { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <120000000>; - clock-output-names = "audio_ipg_clk"; - }; - dsp_lpcg: clock-controller@59580000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x59580000 0x10000>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerPATCH 7/7 arm64: dts: imx8dxl-ss-conn: Move conn_enet0_root_clk outside of soc
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
The conn_enet0_root_clk node does not have any register associated with it, so it should be moved outside of soc to fix schema warning from simple-bus.yaml.
--- arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +3 -1
@@ -6,14 +6,16 @@ /delete-node/ &enet1_lpcg; /delete-node/ &fec2; -&conn_subsys { +/ { conn_enet0_root_clk: clock-conn-enet0-root { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <250000000>; clock-output-names = "conn_enet0_root_clk"; }; +}; +&conn_subsys { eqos: ethernet@5b050000 { compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x5b050000 0x10000>;
Signature · 7 lines
2.34.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 5 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
The
lsio_mem_clkis not used anywhere, so simply remove it.Signed-off-by Fabio Estevam <[email protected]>
Applied all, thanks!