Skip to contentSkip to conversation

ARM: dts: imx6qdl-gw591: Remove lis2de12 interrupt-names

PATCH Applied Fabio Estevam 3 participants 3 messages Sep 7, 2023 – Sep 25, 2023

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx6qdl-gw591: Remove lis2de12 interrupt-names

From: Fabio Estevam <[email protected]>

According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one.

Remove it to fix the following schema warnings:

imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi | 1 -
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi | 1 -
 2 files changed, 2 deletions(-)
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +0 -1
index 218d6e667ed2..424dc7fcd533 100644
@@ -326,7 +326,6 @@ accel@19 {
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +0 -1
index de5983cf7810..49ea25c71967 100644
@@ -307,7 +307,6 @@ accel@19 {
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 0>;
-		interrupt-names = "INT1";
 	};
 };
Signature · 7 lines
2.34.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Acked-by on v1 1/1
#1 lore raw
Quoted 42 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one.

Remove it to fix the following schema warnings:

imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi | 1 -
 arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi | 1 -
 2 files changed, 2 deletions(-)
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi +0 -1
index 218d6e667ed2..424dc7fcd533 100644
@@ -326,7 +326,6 @@ accel@19 {
                st,drdy-int-pin = <1>;
                interrupt-parent = <&gpio7>;
                interrupts = <13 0>;
-               interrupt-names = "INT1";
        };
 };
arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi +0 -2
index de5983cf7810..49ea25c71967 100644
@@ -307,7 +307,6 @@ accel@19 {
                st,drdy-int-pin = <1>;
                interrupt-parent = <&gpio7>;
                interrupts = <13 0>;
-               interrupt-names = "INT1";
        };
 };
 
--
Quoted 2 lines

2.34.1

Hi Fabio,

Acked-by Tim Harvey <[email protected]>

Best regards,

Tim

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Applied
#2 lore raw
In reply to Fabio Estevam
Quoted 11 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

According to st,st-sensors.yaml, the 'interrupt-names' property is not a valid one.

Remove it to fix the following schema warnings:

imx6dl-gw5912.dtb: accel@19: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#

Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks!

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel