Skip to contentSkip to conversation

MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

PATCH Applied Christoph Hellwig 3 participants 5 messages Sep 5, 2023 – Sep 25, 2023 MIPS

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all.

Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support.

Fixes d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage")
---
 arch/mips/alchemy/devboards/db1000.c | 4 ++++
 arch/mips/alchemy/devboards/db1200.c | 6 ++++++
 arch/mips/alchemy/devboards/db1300.c | 4 ++++
 3 files changed, 14 insertions(+)
arch/mips/alchemy/devboards/db1000.c +4 -0
index 012da042d0a4f7..7b9f91db227f2d 100644
@@ -164,6 +164,7 @@ static struct platform_device db1x00_audio_dev = {
 
 /******************************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 {
 	mmc_detect_change(ptr, msecs_to_jiffies(500));
@@ -369,6 +370,7 @@ static struct platform_device db1100_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
 	.resource	= au1100_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /******************************************************************************/
 
@@ -440,8 +442,10 @@ static struct platform_device *db1x00_devs[] = {
 
 static struct platform_device *db1100_devs[] = {
 	&au1100_lcd_device,
+#ifdef CONFIG_MMC_AU1X
 	&db1100_mmc0_dev,
 	&db1100_mmc1_dev,
+#endif
 };
 
 int __init db1000_dev_setup(void)
arch/mips/alchemy/devboards/db1200.c +6 -0
index 76080c71a2a7b6..f521874ebb07b2 100644
@@ -326,6 +326,7 @@ static struct platform_device db1200_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 /* SD carddetects:  they're supposed to be edge-triggered, but ack
  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
  * is disabled and its counterpart enabled.  The 200ms timeout is
@@ -584,6 +585,7 @@ static struct platform_device pb1200_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
 	.resource	= au1200_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -751,7 +753,9 @@ static struct platform_device db1200_audiodma_dev = {
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1200_mmc0_dev,
+#endif
 	&au1200_lcd_dev,
 	&db1200_eth_dev,
 	&db1200_nand_dev,
@@ -762,7 +766,9 @@ static struct platform_device *db1200_devs[] __initdata = {
 };
 
 static struct platform_device *pb1200_devs[] __initdata = {
+#ifdef CONFIG_MMC_AU1X
 	&pb1200_mmc1_dev,
+#endif
 };
 
 /* Some peripheral base addresses differ on the PB1200 */
arch/mips/alchemy/devboards/db1300.c +4 -0
index ff61901329c626..d377e043b49f86 100644
@@ -450,6 +450,7 @@ static struct platform_device db1300_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 {
 	disable_irq_nosync(irq);
@@ -632,6 +633,7 @@ static struct platform_device db1300_sd0_dev = {
 	.resource	= au1300_sd0_res,
 	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -767,8 +769,10 @@ static struct platform_device *db1300_dev[] __initdata = {
 	&db1300_5waysw_dev,
 	&db1300_nand_dev,
 	&db1300_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1300_sd0_dev,
 	&db1300_sd1_dev,
+#endif
 	&db1300_lcd_dev,
 	&db1300_ac97_dev,
 	&db1300_i2s_dev,
Signature · 1 line
2.39.2
Acked-by Tested-by on v1 1/1
#1 lore raw
Quoted 7 lines · Christoph Hellwig

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all.

Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support.

Quoted 9 lines
Fixes d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage")
---
 arch/mips/alchemy/devboards/db1000.c | 4 ++++
 arch/mips/alchemy/devboards/db1200.c | 6 ++++++
 arch/mips/alchemy/devboards/db1300.c | 4 ++++
 3 files changed, 14 insertions(+)

Thanks.

Signature · 1 line
~Randy
maintainer Applied
#4 lore raw
In reply to Christoph Hellwig
Quoted 7 lines · Christoph Hellwig

While commit d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage") to be built in, it can still build a kernel without MMC support and thuse no mmc_detect_change symbol at all.

Add ifdefs to build the mmc support code in the alchemy arch code conditional on mmc support.

Quoted 8 lines
Fixes d4a5c59a955b ("mmc: au1xmmc: force non-modular build and remove symbol_get usage")
---
 arch/mips/alchemy/devboards/db1000.c | 4 ++++
 arch/mips/alchemy/devboards/db1200.c | 6 ++++++
 arch/mips/alchemy/devboards/db1300.c | 4 ++++
 3 files changed, 14 insertions(+)

applied to mips-fixes.

Thomas.

Signature · 2 lines
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]