ALSA: hda/tas2781: Support ACPI_ID both TXNW2781 and TIAS2781
PATCH 1/1 ALSA: hda/tas2781: Support ACPI_ID both TXNW2781 and TIAS2781
Support ACPI_ID both TXNW2781 and TIAS2781, TXNW2781 is the only one legal ACPI ID, TIAS2781 is the widely-used ACPI ID named by our customers, so far it is not registered. We have discussed this with them, they requested TIAS2781 must be supported for the laptops already released to market, their new laptops will switch to TXNW2781.
---
Changes in v1:
- Add TXNW2781 into tas2781_acpi_hda_match and move it to the top
- Redefine tas2781_generic_fixup, remove hid param
- TIAS2781 has been used by our customers, see following dstd.dsl. We have discussed this with them, they requested TIAS2781 must be supported for the laptops already released to market, their new laptops will switch to TXNW2781
Name (_HID, "TIAS2781") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_SUB, 0, NotSerialized) // _SUB: Subsystem ID
{
If ((SPID == Zero))
{
Return ("17AA3886")
}
If ((SPID == One))
{
Return ("17AA3884")
}
}
- Add TXNW2781 support in comp_match_tas2781_dev_name
---
sound/pci/hda/patch_realtek.c | 36 ++++++++++++++++++---------------
sound/pci/hda/tas2781_hda_i2c.c | 33 ++++++++++++++++++------------
2 files changed, 40 insertions(+), 29 deletions(-)sound/pci/hda/patch_realtek.c +20 -16
@@ -6770,24 +6770,35 @@ static int comp_match_cs35l41_dev_name(struct device *dev, void *data)return !strcmp (d + n, tmp); } +/* TIAS2781 is the unofficial ACPI id, but widely used in current devices. +* TXNW2781 is the official ACPI id, and will be used in the new devices. +* Check TIAS2781 or TXNW2781 +*/ static int comp_match_tas2781_dev_name (struct device *dev,void *data) { -struct scodec_dev_name *p = data; +const char c[][10 ] = {"TXNW2781" ,"TIAS2781" };const char *d =dev_name (dev); -int n =strlen (p->bus); +const char *bus = data; +int n =strlen (bus), i;char tmp[32 ];/* check the bus name */ -if (strncmp (d, p->bus, n)) +if (strncmp (d, bus, n))return 0 ;/* skip the bus number */ if (isdigit (d[n])) n++; -/* the rest must be exact matching */ -snprintf (tmp,sizeof (tmp),"-%s:00" , p->hid); -return !strcmp (d + n, tmp); +for (i =0 ; i <ARRAY_SIZE (c); i++) { +/* the rest must be exact matching */ +snprintf (tmp,sizeof (tmp),"-%s:00" , c[i]); + +if (!strcmp (d + n, tmp)) +return 1 ; + } + +return 0 ; } static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char *bus,
@@ -6824,24 +6835,17 @@ static void cs35l41_generic_fixup(struct hda_codec *cdc, int action, const char }static void tas2781_generic_fixup (struct hda_codec *cdc,int action, -const char *bus,const char *hid) +const char *bus) {struct device *dev =hda_codec_dev (cdc);struct alc_spec *spec = cdc->spec; -struct scodec_dev_name *rec;int ret;switch (action) {case HDA_FIXUP_ACT_PRE_PROBE : - rec =devm_kmalloc (dev,sizeof (*rec),GFP_KERNEL ); -if (!rec) -return ; - rec->bus = bus; - rec->hid = hid; - rec->index =0 ; spec->comps[0 ].codec = cdc;component_match_add (dev, &spec->match, - comp_match_tas2781_dev_name, rec); + comp_match_tas2781_dev_name, (void *)bus); ret =component_master_add_with_match (dev, &comp_master_ops, spec->match);if (ret)
@@ -6888,7 +6892,7 @@ static void alc287_fixup_legion_16ithg6_speakers(struct hda_codec *cdc, const ststatic void tas2781_fixup_i2c (struct hda_codec *cdc,const struct hda_fixup *fix,int action) { -tas2781_generic_fixup (cdc, action,"i2c" ,"TIAS2781" ); +tas2781_generic_fixup (cdc, action,"i2c" ); }/* for alc295_fixup_hp_top_speakers */
sound/pci/hda/tas2781_hda_i2c.c +20 -13
@@ -65,6 +65,16 @@ enum calib_data { CALIB_MAX }; +/* TIAS2781 is the unofficial ACPI id, but widely used in current devices. +* TXNW2781 is the official ACPI id, and will be used in the new devices. +*/ +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TIAS2781" ,0 }, + {"TXNW2781" ,1 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match); +static int tas2781_get_i2c_res (struct acpi_resource *ares,void *data) {struct tasdevice_priv *tas_priv = data;
@@ -644,20 +654,23 @@ static void tas2781_hda_remove(struct device *dev)static int tas2781_hda_i2c_probe (struct i2c_client *clt) {struct tasdevice_priv *tas_priv; -const char *device_name; -int ret; +int ret, i; -if (strstr (dev_name (&clt->dev),"TIAS2781" )) - device_name ="TIAS2781" ; -else -return -ENODEV ; +/* Check TIAS2781 or TXNW2781 */ +for (i =0 ; i <ARRAY_SIZE (tas2781_acpi_hda_match); i++) +if (strstr (dev_name (&clt->dev), tas2781_acpi_hda_match[i].id)) +break ; + +if (i ==ARRAY_SIZE (tas2781_acpi_hda_match)) +return dev_err_probe (tas_priv->dev, -ENODEV , +"Device not available\n" ); tas_priv =tasdevice_kzalloc (clt);if (!tas_priv)return -ENOMEM ; tas_priv->irq_info.irq = clt->irq; - ret =tas2781_read_acpi (tas_priv, device_name); + ret =tas2781_read_acpi (tas_priv, tas2781_acpi_hda_match[i].id);if (ret)return dev_err_probe (tas_priv->dev, ret,"Platform not supported\n" );
@@ -822,12 +835,6 @@ static const struct i2c_device_id tas2781_hda_i2c_id[] = { {} }; -static const struct acpi_device_id tas2781_acpi_hda_match[] = { - {"TIAS2781" ,0 }, - {} -}; -MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match); -static struct i2c_driver tas2781_hda_i2c_driver = { .driver = { .name ="tas2781-hda" ,
Signature · 1 line
2.34.1
Hi Shenghao Ding,
Thanks for the patch.
Quoted 47 lines
Subject: [PATCH v1] ALSA: hda/tas2781: Support
ACPI_IDboth TXNW2781 and TIAS2781Support
ACPI_IDboth TXNW2781 and TIAS2781, TXNW2781 is the only one legal ACPI ID, TIAS2781 is the widely-used ACPI ID named by our customers, so far it is not registered. We have discussed this with them, they requested TIAS2781 must be supported for the laptops already released to market, their new laptops will switch to TXNW2781.Signed-off-by Shenghao Ding <[email protected]>---
Changes in v1:
- Add TXNW2781 intotas2781_acpi_hda_matchand move it to the top
- Redefinetas2781_generic_fixup, remove hid param
- TIAS2781 has been used by our customers, see following dstd.dsl. We have discussed this with them, they requested TIAS2781 must be supported for the laptops already released to market, their new laptops will switch to TXNW2781
Name (_HID, "TIAS2781") //_HID: Hardware ID
Name (_UID, Zero) //_UID: Unique ID
Method (_SUB, 0, NotSerialized) //_SUB: Subsystem ID{ If ((SPID == Zero)) { Return ("17AA3886") } If ((SPID == One)) { Return ("17AA3884") } } - Add TXNW2781 support in comp_match_tas2781_dev_name --- sound/pci/hda/patch_realtek.c | 36 ++++++++++++++++++--------------- sound/pci/hda/tas2781_hda_i2c.c | 33 ++++++++++++++++++------------ 2 files changed, 40 insertions(+), 29 deletions(-)sound/pci/hda/patch_realtek.c +0
-0@@ -6770,24 +6770,35 @@ static int comp_match_cs35l41_dev_name(struct device *dev, void *data)return !strcmp (d + n, tmp); }
sound/pci/hda/patch_realtek.c static int comp_match_cs35l41_dev_name(struct · line 6781
Quoted 10 lines
sound/pci/hda/patch_realtek.c +5
-1+/* TIAS2781 is the unofficial ACPI id, but widely used in current devices. +* TXNW2781 is the official ACPI id, and will be used in the new devices. +* Check TIAS2781 or TXNW2781 +*/ static int comp_match_tas2781_dev_name (struct device *dev,void *data) { -struct scodec_dev_name *p = data; +const char c[][10 ] = {"TXNW2781" ,"TIAS2781" };
This you should get from match_data().
See below.
Quoted 88 lines
sound/pci/hda/patch_realtek.c +12
-5const char *d =dev_name (dev); -int n =strlen (p->bus); +const char *bus = data; +int n =strlen (bus), i;char tmp[32 ];/* check the bus name */ -if (strncmp (d, p->bus, n)) +if (strncmp (d, bus, n))return 0 ;/* skip the bus number */ if (isdigit (d[n])) n++; -/* the rest must be exact matching */ -snprintf (tmp,sizeof (tmp),"-%s:00" , p->hid); -return !strcmp (d + n, tmp); +for (i =0 ; i <ARRAY_SIZE (c); i++) { +/* the rest must be exact matching */ +snprintf (tmp,sizeof (tmp),"-%s:00" , c[i]); + +if (!strcmp (d + n, tmp)) +return 1 ; + } + +return 0 ; }static void cs35l41_generic_fixup(struct
hda_codec*cdc, int action, const
char *bus, @@ -6824,24 +6835,17 @@ static void cs35l41_generic_fixup(structhda_codec*cdc, int action, const char }static void tas2781_generic_fixup(struct
hda_codec*cdc, int action,sound/pci/hda/patch_realtek.c +2
-9- const char *bus, const char *hid) + const char *bus) {struct device *dev =hda_codec_dev (cdc);struct alc_spec *spec = cdc->spec; -struct scodec_dev_name *rec;int ret;switch (action) {case HDA_FIXUP_ACT_PRE_PROBE : - rec =devm_kmalloc (dev,sizeof (*rec),GFP_KERNEL ); -if (!rec) -return ; - rec->bus = bus; - rec->hid = hid; - rec->index =0 ; spec->comps[0 ].codec = cdc;component_match_add (dev, &spec->match, - comp_match_tas2781_dev_name, rec); + comp_match_tas2781_dev_name, (void *)bus); ret =component_master_add_with_match (dev, &comp_master_ops, spec->match);if (ret)@@ -6888,7 +6892,7 @@ static voidalc287_fixup_legion_16ithg6_speakers(struct
hda_codec*cdc, const st static void tas2781_fixup_i2c(structhda_codec*cdc,sound/pci/hda/patch_realtek.c +1
-1const struct hda_fixup *fix, int action) { - tas2781_generic_fixup(cdc, action, "i2c", "TIAS2781"); + tas2781_generic_fixup(cdc, action, "i2c"); }/* for alc295_fixup_hp_top_speakers */ (quoted diff) +0
-0
b/sound/pci/hda/tas2781_hda_i2c.cindex fb80280293..8493952305 100644sound/pci/hda/tas2781_hda_i2c.c +10
-0@@ -65,6 +65,16 @@ enum calib_data {CALIB_MAX }; +/* TIAS2781 is the unofficial ACPI id, but widely used in current devices. +* TXNW2781 is the official ACPI id, and will be used in the new devices. +*/ +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TIAS2781" ,0 }, + {"TXNW2781" ,1 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match); +static int tas2781_get_i2c_res (struct acpi_resource *ares,void *data) { struct tasdevice_priv *tas_priv = data; @@ -644,20 +654,23 @@ staticvoid
tas2781_hda_remove(struct device *dev)static inttas2781_hda_i2c_probe(struct i2c_client *clt){sound/pci/hda/tas2781_hda_i2c.c +0
-0struct tasdevice_priv *tas_priv;
sound/pci/hda/tas2781_hda_i2c.c static void tas2781_hda_remove(struct device *dev) · line 660
Quoted 10 lines
sound/pci/hda/tas2781_hda_i2c.c +3
-6-const char *device_name; -int ret; +int ret, i; -if (strstr (dev_name (&clt->dev),"TIAS2781" )) - device_name ="TIAS2781" ; -else -return -ENODEV ; +/* Check TIAS2781 or TXNW2781 */ +for (i =0 ; i <ARRAY_SIZE (tas2781_acpi_hda_match); i++)
Why not aviding for loop as it can be retrieved directly using i2c_get_match_data()?
Update the ACPI/ID table to use pointer to the device_name as data in the table.
Then,
device_name = i2c_get_match_data(client);
if (!device_name && strstr(dev_name(&clt->dev), device_name)))
return dev_err_probe(tas_priv->dev, -ENODEV, "Device not available\n");
Cheers,
Biju
Quoted 42 lines
sound/pci/hda/tas2781_hda_i2c.c +12
-7+static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TIAS2781" ,0 }, + {"TXNW2781" ,1 }, + {} +}; +if (strstr (dev_name (&clt->dev), tas2781_acpi_hda_match[i].id)) +break ; + +if (i ==ARRAY_SIZE (tas2781_acpi_hda_match)) +return dev_err_probe (tas_priv->dev, -ENODEV , +"Device not available\n" ); tas_priv =tasdevice_kzalloc (clt);if (!tas_priv)return -ENOMEM ; tas_priv->irq_info.irq = clt->irq; - ret =tas2781_read_acpi (tas_priv, device_name); + ret =tas2781_read_acpi (tas_priv, tas2781_acpi_hda_match[i].id);if (ret)return dev_err_probe (tas_priv->dev, ret,"Platform not supported\n" );@@ -822,12 +835,6 @@ static const struct i2c_device_id tas2781_hda_i2c_id[] = { {} }; -static const struct acpi_device_id tas2781_acpi_hda_match[] = { - {"TIAS2781" ,0 }, - {} -}; -MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match); -static struct i2c_driver tas2781_hda_i2c_driver = { .driver = {.name = "tas2781-hda",
--
2.34.1
Quoted 5 lines · Shenghao Ding
Support
ACPI_IDboth TXNW2781 and TIAS2781, TXNW2781 is the only one legal ACPI ID, TIAS2781 is the widely-used ACPI ID named by our customers, so far it is not registered. We have discussed this with them, they requested TIAS2781 must be supported for the laptops already released to market, their new laptops will switch to TXNW2781.
...
Quoted 4 lines
+/* TIAS2781 is the unofficial ACPI id, but widely used in current devices.
+ * TXNW2781 is the official ACPI id, and will be used in the new devices.
+ * Check TIAS2781 or TXNW2781
+ */
/*
* This style is only for networking.
* please use one as in this example.
*/
...
sound/pci/hda/patch_realtek.c static int comp_match_cs35l41_dev_name(struct device *dev, void *data) · line 6780
Quoted 1 line
sound/pci/hda/patch_realtek.c +1
-0+const char c[][10 ] = {"TXNW2781" ,"TIAS2781" };
Can you put this to the ACPI device ID table, it will be easier to use it with some other acpi_*() APIs?
That table might need a comment why it has no MODULE_DEVICE_TABLE() with it.
...
sound/pci/hda/patch_realtek.c static int comp_match_cs35l41_dev_name(struct device *dev, void *data) · line 6788
Quoted 6 lines
sound/pci/hda/patch_realtek.c +2
-1+int n =strlen (bus), i; -if (strncmp (d, p->bus, n)) +if (strncmp (d, bus, n))return 0 ;
It means you need to use str_has_prefix().
...
sound/pci/hda/patch_realtek.c static int comp_match_cs35l41_dev_name(struct device *dev, void *data) · line 6799
Quoted 7 lines
sound/pci/hda/patch_realtek.c +7
-0+for (i =0 ; i <ARRAY_SIZE (c); i++) { +/* the rest must be exact matching */ +snprintf (tmp,sizeof (tmp),"-%s:00" , c[i]); + +if (!strcmp (d + n, tmp)) +return 1 ; + }
This can be done differently.
You are comparing the instance of the device to the actual id, right? We have ACPI match APIs for that. Have you tried to look at them?
...
sound/pci/hda/tas2781_hda_i2c.c enum calib_data { · line 76
Quoted 9 lines
sound/pci/hda/tas2781_hda_i2c.c +9
-0+/* TIAS2781 is the unofficial ACPI id, but widely used in current devices. +* TXNW2781 is the official ACPI id, and will be used in the new devices. +*/ +static const struct acpi_device_id tas2781_acpi_hda_match[] = { + {"TIAS2781" ,0 }, + {"TXNW2781" ,1 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match);
So, besides the style of the comment, why do you have two different data structures for the same? Can you find a common place and deduplicate it?
...
Quoted 1 line
-MODULE_DEVICE_TABLE(acpi,
tas2781_acpi_hda_match);
Ah, I see now, it's used for probing. Please, don't move it. The hid is available via device pointer.
...
This patch requires much more work, and esp. be redesigned to use proper ACPI APIs.
Signature · 2 lines
With Best Regards, Andy Shevchenko
kernel test robot
build botkernel test robot noticed the following build warnings:
Hi Shenghao,
kernel test robot noticed the following build warnings:
[auto build test WARNING on tiwai-sound/for-next]
[also build test WARNING on tiwai-sound/for-linus linus/master v6.6-rc1 next-20230912] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Shenghao-Ding/ALSA-hda-tas2781-Support-ACPI_ID-both-TXNW2781-and-TIAS2781/20230910-153010 base: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next patch link: https://lore.kernel.org/r/20230910072704.1359-1-shenghao-ding%40ti.com patch subject: [PATCH v1] ALSA: hda/tas2781: Support ACPI_ID both TXNW2781 and TIAS2781 config: i386-buildonly-randconfig-003-20230912 (https://download.01.org/0day-ci/archive/20230912/[email protected]/config) compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230912/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
>> sound/pci/hda/tas2781_hda_i2c.c:665:24: warning: variable 'tas_priv' is uninitialized when used here [-Wuninitialized]
return dev_err_probe(tas_priv->dev, -ENODEV,
^~~~~~~~
sound/pci/hda/tas2781_hda_i2c.c:656:33: note: initialize the variable 'tas_priv' to silence this warning
struct tasdevice_priv *tas_priv;
^
= NULL1 warning generated.
vim +/tas_priv +665 sound/pci/hda/tas2781_hda_i2c.c
653
654 static int tas2781_hda_i2c_probe(struct i2c_client *clt)
655 {
656 struct tasdevice_priv *tas_priv;
657 int ret, i;
658
659 /* Check TIAS2781 or TXNW2781 */
660 for (i = 0; i < ARRAY_SIZE(tas2781_acpi_hda_match); i++)
661 if (strstr(dev_name(&clt->dev), tas2781_acpi_hda_match[i].id))
662 break;
663
664 if (i == ARRAY_SIZE(tas2781_acpi_hda_match))
> 665 return dev_err_probe(tas_priv->dev, -ENODEV,
666 "Device not available\n");
667
668 tas_priv = tasdevice_kzalloc(clt);
669 if (!tas_priv)
670 return -ENOMEM;
671
672 tas_priv->irq_info.irq = clt->irq;
673 ret = tas2781_read_acpi(tas_priv, tas2781_acpi_hda_match[i].id);
674 if (ret)
675 return dev_err_probe(tas_priv->dev, ret,
676 "Platform not supported\n");
677
678 ret = tasdevice_init(tas_priv);
679 if (ret)
680 goto err;
681
682 pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000);
683 pm_runtime_use_autosuspend(tas_priv->dev);
684 pm_runtime_mark_last_busy(tas_priv->dev);
685 pm_runtime_set_active(tas_priv->dev);
686 pm_runtime_get_noresume(tas_priv->dev);
687 pm_runtime_enable(tas_priv->dev);
688
689 pm_runtime_put_autosuspend(tas_priv->dev);
690
691 ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops);
692 if (ret) {
693 dev_err(tas_priv->dev, "Register component failed: %d\n", ret);
694 pm_runtime_disable(tas_priv->dev);
695 goto err;
696 }
697
698 tas2781_reset(tas_priv);
699 err:
700 if (ret)
701 tas2781_hda_remove(&clt->dev);
702 return ret;
703 }
704
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki