Skip to contentSkip to conversation

scsi: pm8001: Bug fix and cleanup

PATCH Applied Damien Le Moal 2 participants 14 messages Sep 12, 2023 – Sep 27, 2023

Subsystems (2)
SCSI PMC sierra PM8001 driver
lore
Share & tools
lore

Damien Le Moal

author
#0 lore raw

v2 cover scsi: pm8001: Bug fix and cleanup

The first patch of this series fixes an issue with IRQ setup which prevents the controller from resuming after a system suspend. The following patches are code cleanup without any functional changes.

Changes from v1:
* Added Acked-by tag from Jack
* Fixed patch 10 to avoid a sparse warning

Damien Le Moal (10):
scsi: pm8001: Setup IRQs on resume
scsi: pm8001: Introduce pm8001_free_irq()
scsi: pm8001: Introduce pm8001_init_tasklet()
scsi: pm8001: Introduce pm8001_kill_tasklet()
scsi: pm8001: Introduce pm8001_handle_irq()
scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()
scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()
scsi: pm8001: Remove PM8001_USE_MSIX
scsi: pm8001: Remove PM8001_USE_TASKLET
scsi: pm8001: Remove PM8001_READ_VPD

 drivers/scsi/pm8001/pm8001_hwi.c  |  89 ++------
 drivers/scsi/pm8001/pm8001_init.c | 326 +++++++++++++++---------------
 drivers/scsi/pm8001/pm8001_sas.h  |  11 +-
 drivers/scsi/pm8001/pm80xx_hwi.c  |  59 ++----
 4 files changed, 203 insertions(+), 282 deletions(-)
Signature · 1 line
2.41.0
author
#1 lore raw

PATCH v2 1/10 scsi: pm8001: Setup IRQs on resume

The function pm8001_pci_resume() only calls pm8001_request_irq() without calling pm8001_setup_irq(). This causes the IRQ allocation to fail, whihc leads all drives being removed from the system.

Fix this issue by integrating the code for pm8001_setup_irq() directly inside pm8001_request_irq() so that msix setup is performed both during normal initialization and resume operations.

Fixes dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Cc [email protected]
Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 51 +++++++++++--------------------
 1 file changed, 17 insertions(+), 34 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +17 -34
index 5e5ce1e74c3b..443a3176c6c0 100644
@@ -273,7 +273,6 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 	return ret;
 }
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
 
 /**

@@ -294,13 +293,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 	pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
 		   pm8001_ha->chip->n_phy);
 
-	/* Setup Interrupt */
-	rc = pm8001_setup_irq(pm8001_ha);
-	if (rc) {
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "pm8001_setup_irq failed [ret: %d]\n", rc);
-		goto err_out;
-	}
 	/* Request Interrupt */
 	rc = pm8001_request_irq(pm8001_ha);
 	if (rc)

@@ -1031,47 +1023,38 @@ static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
 }
 #endif
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
-{
-	struct pci_dev *pdev;
-
-	pdev = pm8001_ha->pdev;
-
-#ifdef PM8001_USE_MSIX
-	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
-		return pm8001_setup_msix(pm8001_ha);
-	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-#endif
-	return 0;
-}
-
 /**
  * pm8001_request_irq - register interrupt
  * @pm8001_ha: our ha struct.
  */
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = pm8001_ha->pdev;
+#ifdef PM8001_USE_MSIX
 	int rc;
 
-	pdev = pm8001_ha->pdev;
+	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+		rc = pm8001_setup_msix(pm8001_ha);
+		if (rc) {
+			pm8001_dbg(pm8001_ha, FAIL,
+				   "pm8001_setup_irq failed [ret: %d]\n", rc);
+			return rc;
+		}
 
-#ifdef PM8001_USE_MSIX
-	if (pdev->msix_cap && pci_msi_enabled())
-		return pm8001_request_msix(pm8001_ha);
-	else {
-		pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-		goto intx;
+		if (pdev->msix_cap && pci_msi_enabled())
+			return pm8001_request_msix(pm8001_ha);
 	}
+
+	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
 #endif
 
-intx:
 	/* initialize the INT-X interrupt */
 	pm8001_ha->irq_vector[0].irq_id = 0;
 	pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
-	rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
-		pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost));
-	return rc;
+
+	return request_irq(pdev->irq, pm8001_interrupt_handler_intx,
+			   IRQF_SHARED, pm8001_ha->name,
+			   SHOST_TO_SAS_HA(pm8001_ha->shost));
 }
 
 /**
Signature · 1 line
2.41.0
author
#2 lore raw

PATCH v2 2/10 scsi: pm8001: Introduce pm8001_free_irq()

In reply to Damien Le Moal

Instead of repeating the same code twice in pm8001_pci_remove() and pm8001_pci_suspend() to free IRQs, introduuce the function pm8001_free_irq() to do that.

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 49 ++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 21 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +28 -21
index 443a3176c6c0..3b7d47cd70ba 100644
@@ -274,6 +274,7 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 }
 
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
+static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha);
 
 /**
  * pm8001_alloc - initiate our hba structure and 6 DMAs area.

@@ -1057,6 +1058,24 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 			   SHOST_TO_SAS_HA(pm8001_ha->shost));
 }
 
+static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+	struct pci_dev *pdev = pm8001_ha->pdev;
+	int i;
+
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		synchronize_irq(pci_irq_vector(pdev, i));
+
+	for (i = 0; i < pm8001_ha->number_of_intr; i++)
+		free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
+
+	pci_free_irq_vectors(pdev);
+#else
+	free_irq(pm8001_ha->irq, pm8001_ha->sas);
+#endif
+}
+
 /**
  * pm8001_pci_probe - probe supported device
  * @pdev: pci device which kernel has been prepared for.

@@ -1252,24 +1271,17 @@ static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha)
 static void pm8001_pci_remove(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
-	struct pm8001_hba_info *pm8001_ha;
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 	int i, j;
-	pm8001_ha = sha->lldd_ha;
+
 	sas_unregister_ha(sha);
 	sas_remove_host(pm8001_ha->shost);
 	list_del(&pm8001_ha->list);
 	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 
-#ifdef PM8001_USE_MSIX
-	for (i = 0; i < pm8001_ha->number_of_intr; i++)
-		synchronize_irq(pci_irq_vector(pdev, i));
-	for (i = 0; i < pm8001_ha->number_of_intr; i++)
-		free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
-	pci_free_irq_vectors(pdev);
-#else
-	free_irq(pm8001_ha->irq, sha);
-#endif
+	pm8001_free_irq(pm8001_ha);
+
 #ifdef PM8001_USE_TASKLET
 	/* For non-msix and msix interrupts */
 	if ((!pdev->msix_cap || !pci_msi_enabled()) ||

@@ -1309,7 +1321,8 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
-	int  i, j;
+	int j;
+
 	sas_suspend_ha(sha);
 	flush_workqueue(pm8001_wq);
 	scsi_block_requests(pm8001_ha->shost);

@@ -1319,15 +1332,9 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev)
 	}
 	PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
-#ifdef PM8001_USE_MSIX
-	for (i = 0; i < pm8001_ha->number_of_intr; i++)
-		synchronize_irq(pci_irq_vector(pdev, i));
-	for (i = 0; i < pm8001_ha->number_of_intr; i++)
-		free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
-	pci_free_irq_vectors(pdev);
-#else
-	free_irq(pm8001_ha->irq, sha);
-#endif
+
+	pm8001_free_irq(pm8001_ha);
+
 #ifdef PM8001_USE_TASKLET
 	/* For non-msix and msix interrupts */
 	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
Signature · 1 line
2.41.0
author
#3 lore raw

PATCH v2 3/10 scsi: pm8001: Introduce pm8001_init_tasklet()

In reply to Damien Le Moal

Factor out the identical code for initializing tasklets in pm8001_pci_alloc() and pm8001_pci_resume() and instead use the new function pm8001_init_tasklet().

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 51 ++++++++++++++++---------------
 1 file changed, 27 insertions(+), 24 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +27 -24
index 3b7d47cd70ba..c490c8509494 100644
@@ -218,6 +218,27 @@ static void pm8001_tasklet(unsigned long opaque)
 		BUG_ON(1);
 	PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 }
+
+static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+
+	/*  Tasklet for non msi-x interrupt handler */
+	if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
+	    (pm8001_ha->chip_id == chip_8001)) {
+		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+			     (unsigned long)&(pm8001_ha->irq_vector[0]));
+		return;
+	}
+	for (i = 0; i < PM8001_MAX_MSIX_VEC; i++)
+		tasklet_init(&pm8001_ha->tasklet[i], pm8001_tasklet,
+			     (unsigned long)&(pm8001_ha->irq_vector[i]));
+}
+
+#else
+
+static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha) {}
+
 #endif
 
 /**

@@ -512,7 +533,6 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 {
 	struct pm8001_hba_info *pm8001_ha;
 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
-	int j;
 
 	pm8001_ha = sha->lldd_ha;
 	if (!pm8001_ha)

@@ -543,17 +563,8 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 	else
 		pm8001_ha->iomb_size = IOMB_SIZE_SPC;
 
-#ifdef PM8001_USE_TASKLET
-	/* Tasklet for non msi-x interrupt handler */
-	if ((!pdev->msix_cap || !pci_msi_enabled())
-	    || (pm8001_ha->chip_id == chip_8001))
-		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
-			(unsigned long)&(pm8001_ha->irq_vector[0]));
-	else
-		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
-			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
-				(unsigned long)&(pm8001_ha->irq_vector[j]));
-#endif
+	pm8001_init_tasklet(pm8001_ha);
+
 	if (pm8001_ioremap(pm8001_ha))
 		goto failed_pci_alloc;
 	if (!pm8001_alloc(pm8001_ha, ent))

@@ -1362,7 +1373,7 @@ static int __maybe_unused pm8001_pci_resume(struct device *dev)
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha;
 	int rc;
-	u8 i = 0, j;
+	u8 i = 0;
 	DECLARE_COMPLETION_ONSTACK(completion);
 
 	pm8001_ha = sha->lldd_ha;

@@ -1390,17 +1401,9 @@ static int __maybe_unused pm8001_pci_resume(struct device *dev)
 	rc = pm8001_request_irq(pm8001_ha);
 	if (rc)
 		goto err_out_disable;
-#ifdef PM8001_USE_TASKLET
-	/*  Tasklet for non msi-x interrupt handler */
-	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
-	    (pm8001_ha->chip_id == chip_8001))
-		tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
-			(unsigned long)&(pm8001_ha->irq_vector[0]));
-	else
-		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
-			tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
-				(unsigned long)&(pm8001_ha->irq_vector[j]));
-#endif
+
+	pm8001_init_tasklet(pm8001_ha);
+
 	PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
 	if (pm8001_ha->chip_id != chip_8001) {
 		for (i = 1; i < pm8001_ha->number_of_intr; i++)
Signature · 1 line
2.41.0
author
#4 lore raw

PATCH v2 4/10 scsi: pm8001: Introduce pm8001_kill_tasklet()

In reply to Damien Le Moal

Factor out the identical code for killing tasklets in pm8001_pci_remove() and pm8001_pci_suspend() and instead use the new function pm8001_kill_tasklet().

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 40 +++++++++++++++----------------
 1 file changed, 19 insertions(+), 21 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +19 -21
index c490c8509494..44a027d76fba 100644
@@ -235,9 +235,25 @@ static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha)
 			     (unsigned long)&(pm8001_ha->irq_vector[i]));
 }
 
+static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha)
+{
+	int i;
+
+	/* For non-msix and msix interrupts */
+	if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
+	    (pm8001_ha->chip_id == chip_8001)) {
+		tasklet_kill(&pm8001_ha->tasklet[0]);
+		return;
+	}
+
+	for (i = 0; i < PM8001_MAX_MSIX_VEC; i++)
+		tasklet_kill(&pm8001_ha->tasklet[i]);
+}
+
 #else
 
 static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha) {}
+static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha) {}
 
 #endif
 

@@ -1283,7 +1299,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
-	int i, j;
+	int i;
 
 	sas_unregister_ha(sha);
 	sas_remove_host(pm8001_ha->shost);

@@ -1292,16 +1308,7 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 
 	pm8001_free_irq(pm8001_ha);
-
-#ifdef PM8001_USE_TASKLET
-	/* For non-msix and msix interrupts */
-	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
-	    (pm8001_ha->chip_id == chip_8001))
-		tasklet_kill(&pm8001_ha->tasklet[0]);
-	else
-		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
-			tasklet_kill(&pm8001_ha->tasklet[j]);
-#endif
+	pm8001_kill_tasklet(pm8001_ha);
 	scsi_host_put(pm8001_ha->shost);
 
 	for (i = 0; i < pm8001_ha->ccb_count; i++) {

@@ -1332,7 +1339,6 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
-	int j;
 
 	sas_suspend_ha(sha);
 	flush_workqueue(pm8001_wq);

@@ -1345,16 +1351,8 @@ static int __maybe_unused pm8001_pci_suspend(struct device *dev)
 	PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 
 	pm8001_free_irq(pm8001_ha);
+	pm8001_kill_tasklet(pm8001_ha);
 
-#ifdef PM8001_USE_TASKLET
-	/* For non-msix and msix interrupts */
-	if ((!pdev->msix_cap || !pci_msi_enabled()) ||
-	    (pm8001_ha->chip_id == chip_8001))
-		tasklet_kill(&pm8001_ha->tasklet[0]);
-	else
-		for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
-			tasklet_kill(&pm8001_ha->tasklet[j]);
-#endif
 	pm8001_info(pm8001_ha, "pdev=0x%p, slot=%s, entering "
 		      "suspended state\n", pdev,
 		      pm8001_ha->name);
Signature · 1 line
2.41.0
author
#5 lore raw

PATCH v2 5/10 scsi: pm8001: Introduce pm8001_handle_irq()

In reply to Damien Le Moal

Factor out the common code of pm8001_interrupt_handler_msix and of pm8001_interrupt_handler_intx() into the new function pm8001_handle_irq() and use this new helper in these two functions to simplify the code.

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 50 ++++++++++++++-----------------
 1 file changed, 22 insertions(+), 28 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +22 -28
index 44a027d76fba..0ec43e155511 100644
@@ -257,6 +257,23 @@ static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha) {}
 
 #endif
 
+static irqreturn_t pm8001_handle_irq(struct pm8001_hba_info *pm8001_ha,
+				     int irq)
+{
+	if (unlikely(!pm8001_ha))
+		return IRQ_NONE;
+
+	if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
+		return IRQ_NONE;
+
+#ifdef PM8001_USE_TASKLET
+	tasklet_schedule(&pm8001_ha->tasklet[irq]);
+	return IRQ_HANDLED;
+#else
+	return PM8001_CHIP_DISP->isr(pm8001_ha, irq);
+#endif
+}
+
 /**
  * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
  * It obtains the vector number and calls the equivalent bottom

@@ -267,22 +284,10 @@ static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha) {}
  */
 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 {
-	struct isr_param *irq_vector;
-	struct pm8001_hba_info *pm8001_ha;
-	irqreturn_t ret = IRQ_HANDLED;
-	irq_vector = (struct isr_param *)opaque;
-	pm8001_ha = irq_vector->drv_inst;
+	struct isr_param *irq_vector = (struct isr_param *)opaque;
+	struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst;
 
-	if (unlikely(!pm8001_ha))
-		return IRQ_NONE;
-	if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
-		return IRQ_NONE;
-#ifdef PM8001_USE_TASKLET
-	tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
-#else
-	ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
-#endif
-	return ret;
+	return pm8001_handle_irq(pm8001_ha, irq_vector->irq_id);
 }
 
 /**

@@ -293,21 +298,10 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 
 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 {
-	struct pm8001_hba_info *pm8001_ha;
-	irqreturn_t ret = IRQ_HANDLED;
 	struct sas_ha_struct *sha = dev_id;
-	pm8001_ha = sha->lldd_ha;
-	if (unlikely(!pm8001_ha))
-		return IRQ_NONE;
-	if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
-		return IRQ_NONE;
+	struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 
-#ifdef PM8001_USE_TASKLET
-	tasklet_schedule(&pm8001_ha->tasklet[0]);
-#else
-	ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
-#endif
-	return ret;
+	return pm8001_handle_irq(pm8001_ha, 0);
 }
 
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
Signature · 1 line
2.41.0
author
#6 lore raw

PATCH v2 6/10 scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()

In reply to Damien Le Moal

pm8001_chip_msix_interrupt_enable() and pm8001_chip_msix_interrupt_disable() are always cold with the vector argument equal to 0. This allows simplifying the code for these functions. With this change, the functions are simple enough and can be removed by open coding them directly in pm8001_chip_interrupt_enable() and pm8001_chip_interrupt_disable(). Also do the same for the functions pm8001_chip_intx_interrupt_enable() and pm8001_chip_intx_interrupt_disable() and remove these functions.

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 69 +++-----------------------------
 1 file changed, 6 insertions(+), 63 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +6 -63
index 33053db5a713..ef62afc425fc 100644
@@ -1180,65 +1180,6 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
 	}
 }
 
-#ifndef PM8001_USE_MSIX
-/**
- * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- */
-static void
-pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
-{
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
-}
-
-/**
- * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- */
-static void
-pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
-{
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
-}
-
-#else
-
-/**
- * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- * @int_vec_idx: interrupt number to enable
- */
-static void
-pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
-	u32 int_vec_idx)
-{
-	u32 msi_index;
-	u32 value;
-	msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
-	msi_index += MSIX_TABLE_BASE;
-	pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
-	value = (1 << int_vec_idx);
-	pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, value);
-
-}
-
-/**
- * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- * @int_vec_idx: interrupt number to disable
- */
-static void
-pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
-	u32 int_vec_idx)
-{
-	u32 msi_index;
-	msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
-	msi_index += MSIX_TABLE_BASE;
-	pm8001_cw32(pm8001_ha, 0,  msi_index, MSIX_INTERRUPT_DISABLE);
-}
-#endif
-
 /**
  * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
  * @pm8001_ha: our hba card information

@@ -1248,9 +1189,11 @@ static void
 pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
 #ifdef PM8001_USE_MSIX
-	pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
+	pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE, MSIX_INTERRUPT_ENABLE);
+	pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, 1);
 #else
-	pm8001_chip_intx_interrupt_enable(pm8001_ha);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
 #endif
 }
 

@@ -1263,9 +1206,9 @@ static void
 pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
 #ifdef PM8001_USE_MSIX
-	pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
+	pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE, MSIX_INTERRUPT_DISABLE);
 #else
-	pm8001_chip_intx_interrupt_disable(pm8001_ha);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
 #endif
 }
Signature · 1 line
2.41.0
author
#7 lore raw

PATCH v2 7/10 scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()

In reply to Damien Le Moal

Remove the functions pm80xx_chip_intx_interrupt_enable() and pm80xx_chip_intx_interrupt_disable() and open code them respectively in pm80xx_chip_interrupt_enable() and pm80xx_chip_interrupt_disable().

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm80xx_hwi.c | 31 +++++--------------------------
 1 file changed, 5 insertions(+), 26 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +5 -26
index f6857632dc7c..b2749cfbbef1 100644
@@ -1714,27 +1714,6 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
 	pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
 }
 
-/**
- * pm80xx_chip_intx_interrupt_enable - enable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- */
-static void
-pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
-{
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
-}
-
-/**
- * pm80xx_chip_intx_interrupt_disable - disable PM8001 chip interrupt
- * @pm8001_ha: our hba card information
- */
-static void
-pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
-{
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
-}
-
 /**
  * pm80xx_chip_interrupt_enable - enable PM8001 chip interrupt
  * @pm8001_ha: our hba card information

@@ -1749,10 +1728,10 @@ pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	else
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U,
 			    1U << (vec - 32));
-	return;
+#else
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
 #endif
-	pm80xx_chip_intx_interrupt_enable(pm8001_ha);
-
 }
 
 /**

@@ -1773,9 +1752,9 @@ pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	else
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U,
 			    1U << (vec - 32));
-	return;
+#else
+	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
 #endif
-	pm80xx_chip_intx_interrupt_disable(pm8001_ha);
 }
 
 /**
Signature · 1 line
2.41.0
author
#8 lore raw

PATCH v2 8/10 scsi: pm8001: Remove PM8001_USE_MSIX

In reply to Damien Le Moal

The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in pm8001_sas.h because various fields and functions conditionally defined are used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This macro is rather useless anyway and not convenient as diabling MSIX use requires recompiling the driver.

Remove this macro and replace it with the bool module parameter "use_msix" which defaults to true. The use of MSIX interrupts for an adapter is gated by this module parameter for adapters that actually support MSIX. The "use_msix" boolean field is added to struct pm8001_hba_info and all code defined depending on PM8001_USE_MSIX is modified to rely on pm8001_hba_info->use_msix instead.

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_hwi.c  | 32 +++++++++++-----------
 drivers/scsi/pm8001/pm8001_init.c | 45 +++++++++++++++++++------------
 drivers/scsi/pm8001/pm8001_sas.h  |  7 ++---
 drivers/scsi/pm8001/pm80xx_hwi.c  | 38 +++++++++++++-------------
 4 files changed, 67 insertions(+), 55 deletions(-)
drivers/scsi/pm8001/pm8001_hwi.c +16 -16
index ef62afc425fc..6c9e7df0b349 100644
@@ -1188,13 +1188,14 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
 static void
 pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
-#ifdef PM8001_USE_MSIX
-	pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE, MSIX_INTERRUPT_ENABLE);
-	pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, 1);
-#else
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
-#endif
+	if (pm8001_ha->use_msix) {
+		pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE,
+			    MSIX_INTERRUPT_ENABLE);
+		pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, 1);
+	} else {
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+	}
 }
 
 /**

@@ -1205,11 +1206,11 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 static void
 pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
-#ifdef PM8001_USE_MSIX
-	pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE, MSIX_INTERRUPT_DISABLE);
-#else
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
-#endif
+	if (pm8001_ha->use_msix)
+		pm8001_cw32(pm8001_ha, 0, MSIX_TABLE_BASE,
+			    MSIX_INTERRUPT_DISABLE);
+	else
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
 }
 
 /**

@@ -4252,16 +4253,15 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
 
 static u32 pm8001_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
 {
-#ifdef PM8001_USE_MSIX
-	return 1;
-#else
 	u32 value;
 
+	if (pm8001_ha->use_msix)
+		return 1;
+
 	value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
 	if (value)
 		return 1;
 	return 0;
-#endif
 }
 
 /**
drivers/scsi/pm8001/pm8001_init.c +28 -17

92 lines not on this page · raw message

drivers/scsi/pm8001/pm8001_sas.h +4 -3
index 2fadd353f1c1..612856b09187 100644
@@ -83,8 +83,9 @@ do {									\
 		pm8001_info(HBA, fmt, ##__VA_ARGS__);			\
 } while (0)
 
+extern bool pm8001_use_msix;
+
 #define PM8001_USE_TASKLET
-#define PM8001_USE_MSIX
 #define PM8001_READ_VPD
 
 

@@ -520,11 +521,11 @@ struct pm8001_hba_info {
 	struct pm8001_device	*devices;
 	struct pm8001_ccb_info	*ccb_info;
 	u32			ccb_count;
-#ifdef PM8001_USE_MSIX
+
+	bool			use_msix;
 	int			number_of_intr;/*will be used in remove()*/
 	char			intr_drvname[PM8001_MAX_MSIX_VEC]
 				[PM8001_NAME_LENGTH+1+3+1];
-#endif
 #ifdef PM8001_USE_TASKLET
 	struct tasklet_struct	tasklet[PM8001_MAX_MSIX_VEC];
 #endif
drivers/scsi/pm8001/pm80xx_hwi.c +19 -19
index b2749cfbbef1..6041d3b88547 100644
@@ -1722,16 +1722,16 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
 static void
 pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
-#ifdef PM8001_USE_MSIX
+	if (!pm8001_ha->use_msix) {
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+		return;
+	}
+
 	if (vec < 32)
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, 1U << vec);
 	else
-		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U,
-			    1U << (vec - 32));
-#else
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
-#endif
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U, 1U << (vec - 32));
 }
 
 /**

@@ -1742,19 +1742,20 @@ pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 static void
 pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
-#ifdef PM8001_USE_MSIX
+	if (!pm8001_ha->use_msix) {
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
+		return;
+	}
+
 	if (vec == 0xFF) {
 		/* disable all vectors 0-31, 32-63 */
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 0xFFFFFFFF);
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 0xFFFFFFFF);
-	} else if (vec < 32)
+	} else if (vec < 32) {
 		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 1U << vec);
-	else
-		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U,
-			    1U << (vec - 32));
-#else
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
-#endif
+	} else {
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 1U << (vec - 32));
+	}
 }
 
 /**

@@ -4779,16 +4780,15 @@ static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
 
 static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
 {
-#ifdef PM8001_USE_MSIX
-	return 1;
-#else
 	u32 value;
 
+	if (pm8001_ha->use_msix)
+		return 1;
+
 	value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
 	if (value)
 		return 1;
 	return 0;
-#endif
 }
 
 /**
Signature · 1 line
2.41.0
author
#9 lore raw

PATCH v2 9/10 scsi: pm8001: Remove PM8001_USE_TASKLET

In reply to Damien Le Moal

Remove the macro PM8001_USE_TASKLET used to conditionally use tasklets for MSIX interrupts handling and replace it with the boolean module parameter pm8001_use_tasklet. This parameter defaults to true and can be true only if pm8001_use_msix is also true.

Code conditionnaly defined with PM8001_USE_TASKLET is modified to instead use the parameter pm8001_use_tasklet.

Signed-off-by Damien Le Moal <[email protected]>
Acked-by Jack Wang <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 40 ++++++++++++++++---------------
 drivers/scsi/pm8001/pm8001_sas.h  |  3 ---
 2 files changed, 21 insertions(+), 22 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +21 -19
index 8e59d0d46cd3..78c22421d6fe 100644
@@ -60,6 +60,10 @@ bool pm8001_use_msix = true;
 module_param_named(use_msix, pm8001_use_msix, bool, 0444);
 MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true");
 
+static bool pm8001_use_tasklet = true;
+module_param_named(use_tasklet, pm8001_use_tasklet, bool, 0444);
+MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true");
+
 static struct scsi_transport_template *pm8001_stt;
 static int pm8001_init_ccb_tag(struct pm8001_hba_info *);
 

@@ -204,8 +208,6 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 	kfree(pm8001_ha);
 }
 
-#ifdef PM8001_USE_TASKLET
-
 /**
  * pm8001_tasklet() - tasklet for 64 msi-x interrupt handler
  * @opaque: the passed general host adapter struct

@@ -213,13 +215,12 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
  */
 static void pm8001_tasklet(unsigned long opaque)
 {
-	struct pm8001_hba_info *pm8001_ha;
-	struct isr_param *irq_vector;
+	struct isr_param *irq_vector = (struct isr_param *)opaque;
+	struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst;
+
+	if (WARN_ON_ONCE(!pm8001_ha))
+		return;
 
-	irq_vector = (struct isr_param *)opaque;
-	pm8001_ha = irq_vector->drv_inst;
-	if (unlikely(!pm8001_ha))
-		BUG_ON(1);
 	PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 }
 

@@ -227,6 +228,9 @@ static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha)
 {
 	int i;
 
+	if (!pm8001_use_tasklet)
+		return;
+
 	/*  Tasklet for non msi-x interrupt handler */
 	if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
 	    (pm8001_ha->chip_id == chip_8001)) {

@@ -243,6 +247,9 @@ static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha)
 {
 	int i;
 
+	if (!pm8001_use_tasklet)
+		return;
+
 	/* For non-msix and msix interrupts */
 	if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
 	    (pm8001_ha->chip_id == chip_8001)) {

@@ -254,13 +261,6 @@ static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha)
 		tasklet_kill(&pm8001_ha->tasklet[i]);
 }
 
-#else
-
-static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha) {}
-static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha) {}
-
-#endif
-
 static irqreturn_t pm8001_handle_irq(struct pm8001_hba_info *pm8001_ha,
 				     int irq)
 {

@@ -270,12 +270,11 @@ static irqreturn_t pm8001_handle_irq(struct pm8001_hba_info *pm8001_ha,
 	if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
 		return IRQ_NONE;
 
-#ifdef PM8001_USE_TASKLET
+	if (!pm8001_use_tasklet)
+		return PM8001_CHIP_DISP->isr(pm8001_ha, irq);
+
 	tasklet_schedule(&pm8001_ha->tasklet[irq]);
 	return IRQ_HANDLED;
-#else
-	return PM8001_CHIP_DISP->isr(pm8001_ha, irq);
-#endif
 }
 
 /**

@@ -1538,6 +1537,9 @@ static int __init pm8001_init(void)
 {
 	int rc = -ENOMEM;
 
+	if (pm8001_use_tasklet && !pm8001_use_msix)
+		pm8001_use_tasklet = false;
+
 	pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
 	if (!pm8001_wq)
 		goto err;
drivers/scsi/pm8001/pm8001_sas.h +0 -3
index 612856b09187..e14c6668b0d3 100644
@@ -85,7 +85,6 @@ do {									\
 
 extern bool pm8001_use_msix;
 
-#define PM8001_USE_TASKLET
 #define PM8001_READ_VPD
 
 

@@ -526,9 +525,7 @@ struct pm8001_hba_info {
 	int			number_of_intr;/*will be used in remove()*/
 	char			intr_drvname[PM8001_MAX_MSIX_VEC]
 				[PM8001_NAME_LENGTH+1+3+1];
-#ifdef PM8001_USE_TASKLET
 	struct tasklet_struct	tasklet[PM8001_MAX_MSIX_VEC];
-#endif
 	u32			logging_level;
 	u32			link_rate;
 	u32			fw_status;
Signature · 1 line
2.41.0
author
#10 lore raw

PATCH v2 10/10 scsi: pm8001: Remove PM8001_READ_VPD

In reply to Damien Le Moal

Remove the macro PM8001_READ_VPD used to define if a controller WWN should be retrieved from the device. Instead, define the better named boolean module parameter "read_wwn" to control this.

The code to set a fixed address for a phy device address when read_wwn is set to false is simplified and fixed to avoid sparse warnings.

Signed-off-by Damien Le Moal <[email protected]>
---
 drivers/scsi/pm8001/pm8001_init.c | 50 +++++++++++++++++--------------
 drivers/scsi/pm8001/pm8001_sas.h  |  3 --
 2 files changed, 28 insertions(+), 25 deletions(-)
drivers/scsi/pm8001/pm8001_init.c +28 -22
index 78c22421d6fe..ed6b7d954dda 100644
@@ -64,6 +64,10 @@ static bool pm8001_use_tasklet = true;
 module_param_named(use_tasklet, pm8001_use_tasklet, bool, 0444);
 MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true");
 
+static bool pm8001_read_wwn = true;
+module_param_named(read_wwn, pm8001_read_wwn, bool, 0444);
+MODULE_PARM_DESC(zoned, "Get WWN from the controller. Default: true");
+
 static struct scsi_transport_template *pm8001_stt;
 static int pm8001_init_ccb_tag(struct pm8001_hba_info *);
 

@@ -683,19 +687,30 @@ static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
  */
 static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 {
-	u8 i, j;
-	u8 sas_add[8];
-#ifdef PM8001_READ_VPD
-	/* For new SPC controllers WWN is stored in flash vpd
-	*  For SPC/SPCve controllers WWN is stored in EEPROM
-	*  For Older SPC WWN is stored in NVMD
-	*/
 	DECLARE_COMPLETION_ONSTACK(completion);
 	struct pm8001_ioctl_payload payload;
+	unsigned long time_remaining;
+	u8 sas_add[8];
 	u16 deviceid;
 	int rc;
-	unsigned long time_remaining;
+	u8 i, j;
+
+	if (!pm8001_read_wwn) {
+		__be64 dev_sas_addr = cpu_to_be64(0x50010c600047f9d0ULL);
+
+		for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+			memcpy(&pm8001_ha->phy[i].dev_sas_addr, &dev_sas_addr,
+			       SAS_ADDR_SIZE);
+		memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+		       SAS_ADDR_SIZE);
+		return 0;
+	}
 
+	/*
+	 * For new SPC controllers WWN is stored in flash vpd. For SPC/SPCve
+	 * controllers WWN is stored in EEPROM. And for Older SPC WWN is stored
+	 * in NVMD.
+	 */
 	if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
 		pm8001_dbg(pm8001_ha, FAIL, "controller is in fatal error state\n");
 		return -EIO;

@@ -769,16 +784,7 @@ static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 			   pm8001_ha->phy[i].dev_sas_addr);
 	}
 	kfree(payload.func_specific);
-#else
-	for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
-		pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
-		pm8001_ha->phy[i].dev_sas_addr =
-			cpu_to_be64((u64)
-				(*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
-	}
-	memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
-		SAS_ADDR_SIZE);
-#endif
+
 	return 0;
 }
 

@@ -788,13 +794,13 @@ static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
  */
 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 {
-
-#ifdef PM8001_READ_VPD
-	/*OPTION ROM FLASH read for the SPC cards */
 	DECLARE_COMPLETION_ONSTACK(completion);
 	struct pm8001_ioctl_payload payload;
 	int rc;
 
+	if (!pm8001_read_wwn)
+		return 0;
+
 	pm8001_ha->nvmd_completion = &completion;
 	/* SAS ADDRESS read from flash / EEPROM */
 	payload.minor_function = 6;

@@ -813,7 +819,7 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 	wait_for_completion(&completion);
 	pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
 	kfree(payload.func_specific);
-#endif
+
 	return 0;
 }
drivers/scsi/pm8001/pm8001_sas.h +0 -3
index e14c6668b0d3..3ccb7371902f 100644
@@ -85,9 +85,6 @@ do {									\
 
 extern bool pm8001_use_msix;
 
-#define PM8001_READ_VPD
-
-
 #define IS_SPCV_12G(dev)	((dev->device == 0X8074)		\
 				|| (dev->device == 0X8076)		\
 				|| (dev->device == 0X8077)		\
Signature · 1 line
2.41.0
Applied
#11 lore raw
In reply to Damien Le Moal
Quoted 9 lines · Damien Le Moal

The first patch of this series fixes an issue with IRQ setup which prevents the controller from resuming after a system suspend. The following patches are code cleanup without any functional changes.

Changes from v1:
* Added Acked-by tag from Jack
* Fixed patch 10 to avoid a sparse warning

[...]

Applied to 6.6/scsi-fixes, thanks!

[01/10] scsi: pm8001: Setup IRQs on resume

        https://git.kernel.org/mkp/scsi/c/c91774818b04
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#12 lore raw
In reply to Damien Le Moal

Damien,

Quoted 3 lines

The first patch of this series fixes an issue with IRQ setup which prevents the controller from resuming after a system suspend. The following patches are code cleanup without any functional changes.

Applied #2-10 to 6.7/scsi-staging (now that the first patch is in Linus' tree). Thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
Applied
#13 lore raw
In reply to Damien Le Moal
Quoted 9 lines · Damien Le Moal

The first patch of this series fixes an issue with IRQ setup which prevents the controller from resuming after a system suspend. The following patches are code cleanup without any functional changes.

Changes from v1:
* Added Acked-by tag from Jack
* Fixed patch 10 to avoid a sparse warning

[...]

Applied to 6.7/scsi-queue, thanks!

[01/10] scsi: pm8001: Setup IRQs on resume

        https://git.kernel.org/mkp/scsi/c/c91774818b04
[02/10] scsi: pm8001: Introduce pm8001_free_irq()
        https://git.kernel.org/mkp/scsi/c/d21bfabf0e65
[03/10] scsi: pm8001: Introduce pm8001_init_tasklet()
        https://git.kernel.org/mkp/scsi/c/a08119183bc6
[04/10] scsi: pm8001: Introduce pm8001_kill_tasklet()
        https://git.kernel.org/mkp/scsi/c/80bb942b35c7
[05/10] scsi: pm8001: Introduce pm8001_handle_irq()
        https://git.kernel.org/mkp/scsi/c/07ca8c1ad061
[06/10] scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()
        https://git.kernel.org/mkp/scsi/c/d6f2f6c6e341
[07/10] scsi: pm8001: Remove pm80xx_chip_intx_interrupt_enable/disable()
        https://git.kernel.org/mkp/scsi/c/d93e1ac40354
[08/10] scsi: pm8001: Remove PM8001_USE_MSIX
        https://git.kernel.org/mkp/scsi/c/efa1fca45082
[09/10] scsi: pm8001: Remove PM8001_USE_TASKLET
        https://git.kernel.org/mkp/scsi/c/205430290ad0
[10/10] scsi: pm8001: Remove PM8001_READ_VPD
        https://git.kernel.org/mkp/scsi/c/80975adc79dd
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering