FAILED: patch "[PATCH] arm64: tegra: Update AHUB clock parent and rate on Tegra234" failed to apply to 6.1-stable tree

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x e483fe34adab3197558b7284044c1b26f5ede20e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023091303-gossip-dork-5e54@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

e483fe34adab ("arm64: tegra: Update AHUB clock parent and rate on Tegra234") 2838cfddbc1c ("arm64: tegra: Bump #address-cells and #size-cells") 132b552cba15 ("arm64: tegra: Fix up compatible string for SDMMC1 on Tegra234") b2fbcbe1ae19 ("arm64: tegra: Use correct compatible string for Tegra234 HDA") 7f0ea5acfc19 ("arm64: tegra: Use correct compatible string for Tegra194 HDA") 47a2f35d9ea7 ("arm64: tegra: Fix non-prefetchable aperture of PCIe C3 controller") 6f380a4ec04f ("arm64: tegra: Separate AON pinmux from main pinmux on Tegra194") 794b834d4cd3 ("arm64: tegra: Add ECAM aperture info for all the PCIe controllers") 8fbd2d118917 ("arm64: tegra: Enable GTE nodes")
78159542034f ("arm64: tegra: Sort nodes by unit-address")
d71b893a119d ("arm64: tegra: Add Tegra234 SDMMC1 device tree node") 1bbba854bc40 ("arm64: tegra: Add SBSA UART for Tegra234")
7a2c613bdbd8 ("arm64: tegra: Add PWM fan for Jetson AGX Orin")
2566d28c4097 ("arm64: tegra: Populate Tegra234 PWMs")
04491207d2d1 ("arm64: tegra: Remove unused property for I2C")
248400656b1c ("arm64: tegra: Fix Prefetchable aperture ranges of Tegra234 PCIe controllers") 68c31ad01105 ("arm64: tegra: Add NVDEC on Tegra234")
e25770feb6d6 ("arm64: tegra: Fix ranges for host1x nodes")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From e483fe34adab3197558b7284044c1b26f5ede20e Mon Sep 17 00:00:00 2001
From: Sheetal <[email protected]>
Date: Thu, 29 Jun 2023 10:42:16 +0530
Subject: [PATCH] arm64: tegra: Update AHUB clock parent and rate on Tegra234

I2S data sanity tests fail beyond a bit clock frequency of 6.144MHz. This happens because the AHUB clock rate is too low and it shows 9.83MHz on boot.

The maximum rate of PLLA_OUT0 is 49.152MHz and is used to serve I/O clocks. It is recommended that AHUB clock operates higher than this. Thus fix this by using PLLP_OUT0 as parent clock for AHUB instead of PLLA_OUT0 and fix the rate to 81.6MHz.

index f4974e81dd4b..0f12a8debd8a 100644
@@ -180,7 +180,8 @@ tegra_ahub: ahub@2900800 {
 				clocks = <&bpmp TEGRA234_CLK_AHUB>;
 				clock-names = "ahub";
 				assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>;
-				assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+				assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+				assigned-clock-rates = <81600000>;
 				status = "disabled";
 
 				#address-cells = <2>;