Subsystems (2)
From: Frank Wunderlich <[email protected]>
Subject: [RFC v1] arm64: dts: mediatek: add dtbs with applied overlays for
bpi-r3
Build devicetree binaries for testing overlays and providing users full dtb without using overlays.
Suggested-by Rob Herring <[email protected]>
Signed-off-by Frank Wunderlich <[email protected]>
---
based on discussion here:
https://lore.kernel.org/all/CAL_JsqK_3xxD0DFwipXO85P=q=EYjUdjE1_8g1MKtvw3vVzx5A@mail.gmail.com/
https://lore.kernel.org/all/CAL_JsqJSi=kJSix=f3787ULZnaCy_Y26Phdhy5y9fat_vkDuUw@mail.gmail.com/
--- arch/arm64/boot/dts/mediatek/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/mediatek/Makefile +8 -0
@@ -13,6 +13,14 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-emmc.dtbo mt7986a-bananapi-bpi-r3-nand.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-emmc.dtbo mt7986a-bananapi-bpi-r3-nor.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-sd.dtbo mt7986a-bananapi-bpi-r3-nand.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-sd.dtbo mt7986a-bananapi-bpi-r3-nor.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
Signature · 1 line
2.34.1