Skip to contentSkip to conversation

iio: adc: ad7192: Add improvements and new feature

PATCH Superseded [email protected] 2 participants 5 messages Sep 18, 2023 – Sep 19, 2023

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover iio: adc: ad7192: Add improvements and new feature

From: Alisa-Dariana Roman <[email protected]>

Dear maintainers,

I am submitting a series of patches to improve the ad7192 driver. I would like to highlight that patch 3 is dependent on patch 2. For patch 3 to be applied, patch 2 needs to be applied beforehand. Also, patch 1 upgrades the driver to match the style of the last two patches.

Please consider applying these patches in order.

Thank you for your time and attention.

Sincerely,

Alisa-Dariana Roman (3):
iio: adc: ad7192: Use bitfield access macros
iio: adc: ad7192: Improve f_order computation
iio: adc: ad7192: Add fast settling support

 .../ABI/testing/sysfs-bus-iio-adc-ad7192      |  18 ++
 drivers/iio/adc/ad7192.c                      | 230 +++++++++++++++---
 2 files changed, 208 insertions(+), 40 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/3 iio: adc: ad7192: Use bitfield access macros

From: Alisa-Dariana Roman <[email protected]>

Include bitfield.h and update driver to use bitfield access macros GENMASK, FIELD_PREP and FIELD_GET.

Also simplify AD7192_CONF_GAIN(-1) to AD7192_CONF_GAIN_MASK and AD7192_MODE_RATE(-1) to AD7192_MODE_RATE_MASK.

---
 drivers/iio/adc/ad7192.c | 50 +++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 18 deletions(-)
drivers/iio/adc/ad7192.c +32 -18
index 69d1103b9508..e83fecb63c1d 100644
@@ -6,6 +6,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -43,7 +44,9 @@
 #define AD7192_COMM_WEN		BIT(7) /* Write Enable */
 #define AD7192_COMM_WRITE	0 /* Write Operation */
 #define AD7192_COMM_READ	BIT(6) /* Read Operation */
-#define AD7192_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_ADDR_MASK	GENMASK(5, 3) /* Register Address Mask */
+#define AD7192_COMM_ADDR(x)	FIELD_PREP(AD7192_COMM_ADDR_MASK, x)
+				  /* Register Address */
 #define AD7192_COMM_CREAD	BIT(2) /* Continuous Read of Data Register */
 
 /* Status Register Bit Designations (AD7192_REG_STAT) */
@@ -56,17 +59,24 @@
 #define AD7192_STAT_CH1		BIT(0) /* Channel 1 */
 
 /* Mode Register Bit Designations (AD7192_REG_MODE) */
-#define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
-#define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
-#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_SEL_MASK	GENMASK(23, 21) /* Operation Mode Select Mask */
+#define AD7192_MODE_SEL(x)	FIELD_PREP(AD7192_MODE_SEL_MASK, x)
+				  /* Operation Mode Select */
 #define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
-#define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_STA(x)	FIELD_PREP(AD7192_MODE_STA_MASK, x)
+				  /* Status Register transmission */
+#define AD7192_MODE_CLKSRC_MASK	GENMASK(19, 18) /* Clock Source Select Mask */
+#define AD7192_MODE_CLKSRC(x)	FIELD_PREP(AD7192_MODE_CLKSRC_MASK, x)
+				  /* Clock Source Select */
 #define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
 #define AD7192_MODE_ENPAR	BIT(13) /* Parity Enable */
 #define AD7192_MODE_CLKDIV	BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
 #define AD7192_MODE_SCYCLE	BIT(11) /* Single cycle conversion */
 #define AD7192_MODE_REJ60	BIT(10) /* 50/60Hz notch filter */
-#define AD7192_MODE_RATE(x)	((x) & 0x3FF) /* Filter Update Rate Select */
+#define AD7192_MODE_RATE_MASK	GENMASK(9, 0)
+				  /* Filter Update Rate Select Mask */
+#define AD7192_MODE_RATE(x)	FIELD_PREP(AD7192_MODE_RATE_MASK, x)
+				  /* Filter Update Rate Select */
 
 /* Mode Register: AD7192_MODE_SEL options */
 #define AD7192_MODE_CONT		0 /* Continuous Conversion Mode */
@@ -92,13 +102,16 @@
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_ACX		BIT(22) /* AC excitation enable(AD7195 only) */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN_MASK	GENMASK(18, 8) /* Channel select mask */
+#define AD7192_CONF_CHAN(x)	FIELD_PREP(AD7192_CONF_CHAN_MASK, x)
+				  /* Channel select */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
-#define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
+#define AD7192_CONF_GAIN_MASK	GENMASK(2, 0) /* Gain Select */
+#define AD7192_CONF_GAIN(x)	FIELD_PREP(AD7192_CONF_GAIN_MASK, x)
+				  /* Gain Select */
 
 #define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
 #define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
@@ -130,7 +143,7 @@
 #define CHIPID_AD7192		0x0
 #define CHIPID_AD7193		0x2
 #define CHIPID_AD7195		0x6
-#define AD7192_ID_MASK		0x0F
+#define AD7192_ID_MASK		GENMASK(3, 0)
 
 /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
 #define AD7192_GPOCON_BPDSW	BIT(6) /* Bridge power-down switch enable */
@@ -399,7 +412,7 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	if (ret)
 		return ret;
 
-	id &= AD7192_ID_MASK;
+	id = FIELD_GET(AD7192_ID_MASK, id);
 
 	if (id != st->chip_info->chip_id)
 		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n",
@@ -472,7 +485,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+	return sysfs_emit(buf, "%d\n", !!FIELD_GET(AD7192_CONF_ACX, st->conf));
 }
 
 static ssize_t ad7192_show_bridge_switch(struct device *dev,
@@ -482,7 +495,8 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+	return sysfs_emit(buf, "%d\n",
+			  !!FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon));
 }
 
 static ssize_t ad7192_set(struct device *dev,
@@ -667,9 +681,9 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
 				 st->f_order * AD7192_MODE_RATE(st->mode));
 
-	if (st->conf & AD7192_CONF_CHOP)
+	if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
 		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
-	if (st->mode & AD7192_MODE_SINC3)
+	if (FIELD_GET(AD7192_MODE_SINC3, st->mode))
 		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
 	else
 		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
@@ -682,7 +696,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+	bool unipolar = !!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -746,7 +760,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			if (val2 == st->scale_avail[i][1]) {
 				ret = 0;
 				tmp = st->conf;
-				st->conf &= ~AD7192_CONF_GAIN(-1);
+				st->conf &= ~AD7192_CONF_GAIN_MASK;
 				st->conf |= AD7192_CONF_GAIN(i);
 				if (tmp == st->conf)
 					break;
@@ -769,7 +783,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		st->mode &= ~AD7192_MODE_RATE(-1);
+		st->mode &= ~AD7192_MODE_RATE_MASK;
 		st->mode |= AD7192_MODE_RATE(div);
 		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 		break;
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH 1/3] iio: adc: ad7192: Use bitfield access macros

Quoted 37 lines · On Tue, 19 Sep 2023 00:48:52 +0300 [email protected] wrote:

From: Alisa-Dariana Roman <[email protected]>

Include bitfield.h and update driver to use bitfield access macros GENMASK, FIELD_PREP and FIELD_GET.

Also simplify AD7192_CONF_GAIN(-1) to AD7192_CONF_GAIN_MASK and AD7192_MODE_RATE(-1) to AD7192_MODE_RATE_MASK.

---
 drivers/iio/adc/ad7192.c | 50 +++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 18 deletions(-)
drivers/iio/adc/ad7192.c +4 -1
index 69d1103b9508..e83fecb63c1d 100644
@@ -6,6 +6,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -43,7 +44,9 @@
 #define AD7192_COMM_WEN		BIT(7) /* Write Enable */
 #define AD7192_COMM_WRITE	0 /* Write Operation */
 #define AD7192_COMM_READ	BIT(6) /* Read Operation */
-#define AD7192_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_ADDR_MASK	GENMASK(5, 3) /* Register Address Mask */
+#define AD7192_COMM_ADDR(x)	FIELD_PREP(AD7192_COMM_ADDR_MASK, x)
+				  /* Register Address */
 #define AD7192_COMM_CREAD	BIT(2) /* Continuous Read of Data Register */
 
 /* Status Register Bit Designations (AD7192_REG_STAT) */

drivers/iio/adc/ad7192.c line 63

Quoted 8 lines
drivers/iio/adc/ad7192.c +2 -3
@@ -56,17 +59,24 @@
 #define AD7192_STAT_CH1		BIT(0) /* Channel 1 */
 
 /* Mode Register Bit Designations (AD7192_REG_MODE) */
-#define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
-#define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
-#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_SEL_MASK	GENMASK(23, 21) /* Operation Mode Select Mask */
+#define AD7192_MODE_SEL(x)	FIELD_PREP(AD7192_MODE_SEL_MASK, x)

Hi Alisa-Dariana,

Whilst it is a bigger change, I'd ideally like all these XXX(x) calls to be replaced inline with the FIELD_PREP(). It is just as clear to read and in many cases better because you get patterns that go form

st->mode &= ~AD7192_MODE_SEL_MASK;
st->mode |= AD7192_MODE_SEL(mode);

which becomes the more visible and obvious
st->mode &= ~AD7192_MODE_SEL_MASK;
st->mode |= FIELD_PREP(AD7192_MODE_SEL_MASK, mode);
where you can clearly see the same bits were removed from st->mode, then filled in with the new field value.

That's obscured with the additional macro.

Jonathan

Quoted 117 lines
drivers/iio/adc/ad7192.c +26 -14
+				  /* Operation Mode Select */
 #define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
-#define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_STA(x)	FIELD_PREP(AD7192_MODE_STA_MASK, x)
+				  /* Status Register transmission */
+#define AD7192_MODE_CLKSRC_MASK	GENMASK(19, 18) /* Clock Source Select Mask */
+#define AD7192_MODE_CLKSRC(x)	FIELD_PREP(AD7192_MODE_CLKSRC_MASK, x)
+				  /* Clock Source Select */
 #define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
 #define AD7192_MODE_ENPAR	BIT(13) /* Parity Enable */
 #define AD7192_MODE_CLKDIV	BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
 #define AD7192_MODE_SCYCLE	BIT(11) /* Single cycle conversion */
 #define AD7192_MODE_REJ60	BIT(10) /* 50/60Hz notch filter */
-#define AD7192_MODE_RATE(x)	((x) & 0x3FF) /* Filter Update Rate Select */
+#define AD7192_MODE_RATE_MASK	GENMASK(9, 0)
+				  /* Filter Update Rate Select Mask */
+#define AD7192_MODE_RATE(x)	FIELD_PREP(AD7192_MODE_RATE_MASK, x)
+				  /* Filter Update Rate Select */
 
 /* Mode Register: AD7192_MODE_SEL options */
 #define AD7192_MODE_CONT		0 /* Continuous Conversion Mode */
@@ -92,13 +102,16 @@
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_ACX		BIT(22) /* AC excitation enable(AD7195 only) */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN_MASK	GENMASK(18, 8) /* Channel select mask */
+#define AD7192_CONF_CHAN(x)	FIELD_PREP(AD7192_CONF_CHAN_MASK, x)
+				  /* Channel select */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
-#define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
+#define AD7192_CONF_GAIN_MASK	GENMASK(2, 0) /* Gain Select */
+#define AD7192_CONF_GAIN(x)	FIELD_PREP(AD7192_CONF_GAIN_MASK, x)
+				  /* Gain Select */
 
 #define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
 #define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
@@ -130,7 +143,7 @@
 #define CHIPID_AD7192		0x0
 #define CHIPID_AD7193		0x2
 #define CHIPID_AD7195		0x6
-#define AD7192_ID_MASK		0x0F
+#define AD7192_ID_MASK		GENMASK(3, 0)
 
 /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
 #define AD7192_GPOCON_BPDSW	BIT(6) /* Bridge power-down switch enable */
@@ -399,7 +412,7 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	if (ret)
 		return ret;
 
-	id &= AD7192_ID_MASK;
+	id = FIELD_GET(AD7192_ID_MASK, id);
 
 	if (id != st->chip_info->chip_id)
 		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n",
@@ -472,7 +485,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+	return sysfs_emit(buf, "%d\n", !!FIELD_GET(AD7192_CONF_ACX, st->conf));
 }
 
 static ssize_t ad7192_show_bridge_switch(struct device *dev,
@@ -482,7 +495,8 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+	return sysfs_emit(buf, "%d\n",
+			  !!FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon));
 }
 
 static ssize_t ad7192_set(struct device *dev,
@@ -667,9 +681,9 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
 				 st->f_order * AD7192_MODE_RATE(st->mode));
 
-	if (st->conf & AD7192_CONF_CHOP)
+	if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
 		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
-	if (st->mode & AD7192_MODE_SINC3)
+	if (FIELD_GET(AD7192_MODE_SINC3, st->mode))
 		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
 	else
 		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
@@ -682,7 +696,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+	bool unipolar = !!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -746,7 +760,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			if (val2 == st->scale_avail[i][1]) {
 				ret = 0;
 				tmp = st->conf;
-				st->conf &= ~AD7192_CONF_GAIN(-1);
+				st->conf &= ~AD7192_CONF_GAIN_MASK;
 				st->conf |= AD7192_CONF_GAIN(i);
 				if (tmp == st->conf)
 					break;
@@ -769,7 +783,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		st->mode &= ~AD7192_MODE_RATE(-1);
+		st->mode &= ~AD7192_MODE_RATE_MASK;
 		st->mode |= AD7192_MODE_RATE(div);
 		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 		break;
#3 lore raw

PATCH 2/3 iio: adc: ad7192: Improve f_order computation

In reply to [email protected]

From: Alisa-Dariana Roman <[email protected]>

Instead of using the f_order member of ad7192_state, a function that computes the f_order coefficient makes more sense. This coefficient is a function of the sinc filter and chop filter states.

Remove f_order member of ad7192_state structure. Instead use ad7192_compute_f_order function to compute the f_order coefficient according to the sinc filter and chop filter states passed as parameters.

Add ad7192_get_f_order function that returns the current f_order coefficient of the device.

Add ad7192_compute_f_adc function that computes the f_adc value according to the sinc filter and chop filter states passed as parameters.

Add ad7192_get_f_adc function that returns the current f_adc value of the device.

---
 drivers/iio/adc/ad7192.c | 62 +++++++++++++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 16 deletions(-)
drivers/iio/adc/ad7192.c +46 -16
index e83fecb63c1d..323e25c3ea30 100644
@@ -193,7 +193,6 @@ struct ad7192_state {
 	struct clk			*mclk;
 	u16				int_vref_mv;
 	u32				fclk;
-	u32				f_order;
 	u32				mode;
 	u32				conf;
 	u32				scale_avail[8][2];
@@ -433,7 +432,6 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 		st->conf |= AD7192_CONF_REFSEL;
 
 	st->conf &= ~AD7192_CONF_CHOP;
-	st->f_order = AD7192_NO_SYNC_FILTER;
 
 	buf_en = of_property_read_bool(np, "adi,buffer-enable");
 	if (buf_en)
@@ -544,22 +542,60 @@ static ssize_t ad7192_set(struct device *dev,
 	return ret ? ret : len;
 }
 
+static int ad7192_compute_f_order(bool sinc3_en, bool chop_en)
+{
+	if (!chop_en)
+		return 1;
+
+	if (sinc3_en)
+		return AD7192_SYNC3_FILTER;
+
+	return AD7192_SYNC4_FILTER;
+}
+
+static int ad7192_get_f_order(struct ad7192_state *st)
+{
+	bool sinc3_en, chop_en;
+
+	sinc3_en = FIELD_GET(AD7192_MODE_SINC3, st->mode);
+	chop_en = FIELD_GET(AD7192_CONF_CHOP, st->conf);
+
+	return ad7192_compute_f_order(sinc3_en, chop_en);
+}
+
+static int ad7192_compute_f_adc(struct ad7192_state *st, bool sinc3_en,
+				bool chop_en)
+{
+	unsigned int f_order = ad7192_compute_f_order(sinc3_en, chop_en);
+
+	return DIV_ROUND_CLOSEST(st->fclk,
+				 f_order * AD7192_MODE_RATE(st->mode));
+}
+
+static int ad7192_get_f_adc(struct ad7192_state *st)
+{
+	unsigned int f_order = ad7192_get_f_order(st);
+
+	return DIV_ROUND_CLOSEST(st->fclk,
+				 f_order * AD7192_MODE_RATE(st->mode));
+}
+
 static void ad7192_get_available_filter_freq(struct ad7192_state *st,
 						    int *freq)
 {
 	unsigned int fadc;
 
 	/* Formulas for filter at page 25 of the datasheet */
-	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode));
+	fadc = ad7192_compute_f_adc(st, false, true);
 	freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
 
-	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode));
+	fadc = ad7192_compute_f_adc(st, true, true);
 	freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
 
-	fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode));
+	fadc = ad7192_compute_f_adc(st, false, false);
 	freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024);
+
+	fadc = ad7192_compute_f_adc(st, true, false);
 	freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
 }
 
@@ -642,25 +678,21 @@ static int ad7192_set_3db_filter_freq(struct ad7192_state *st,
 
 	switch (idx) {
 	case 0:
-		st->f_order = AD7192_SYNC4_FILTER;
 		st->mode &= ~AD7192_MODE_SINC3;
 
 		st->conf |= AD7192_CONF_CHOP;
 		break;
 	case 1:
-		st->f_order = AD7192_SYNC3_FILTER;
 		st->mode |= AD7192_MODE_SINC3;
 
 		st->conf |= AD7192_CONF_CHOP;
 		break;
 	case 2:
-		st->f_order = AD7192_NO_SYNC_FILTER;
 		st->mode &= ~AD7192_MODE_SINC3;
 
 		st->conf &= ~AD7192_CONF_CHOP;
 		break;
 	case 3:
-		st->f_order = AD7192_NO_SYNC_FILTER;
 		st->mode |= AD7192_MODE_SINC3;
 
 		st->conf &= ~AD7192_CONF_CHOP;
@@ -678,8 +710,7 @@ static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
 {
 	unsigned int fadc;
 
-	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 st->f_order * AD7192_MODE_RATE(st->mode));
+	fadc = ad7192_get_f_adc(st);
 
 	if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
 		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
@@ -726,8 +757,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 			*val -= 273 * ad7192_get_temp_scale(unipolar);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = st->fclk /
-			(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
+		*val = DIV_ROUND_CLOSEST(ad7192_get_f_adc(st), 1024);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		*val = ad7192_get_3db_filter_freq(st);
@@ -777,7 +807,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		div = st->fclk / (val * st->f_order * 1024);
+		div = st->fclk / (val * ad7192_get_f_order(st) * 1024);
 		if (div < 1 || div > 1023) {
 			ret = -EINVAL;
 			break;
Signature · 1 line
2.34.1
#4 lore raw

PATCH 3/3 iio: adc: ad7192: Add fast settling support

In reply to [email protected]

From: Alisa-Dariana Roman <[email protected]>

Add fast settling mode support for AD7193.

Add fast_settling_average_factor attribute. Expose to user the current value of the fast settling average factor. User can change the value by writing a new one.

Add fast_settling_average_factor_available attribute. Expose to user possible values for the fast settling average factor.

---
 .../ABI/testing/sysfs-bus-iio-adc-ad7192      |  18 +++
 drivers/iio/adc/ad7192.c                      | 130 ++++++++++++++++--
 2 files changed, 136 insertions(+), 12 deletions(-)
Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 +18 -0
index f8315202c8f0..5790adbb1cc1 100644
@@ -19,6 +19,24 @@ Description:
 		the bridge can be disconnected (when it is not being used
 		using the bridge_switch_en attribute.
 
+What:		/sys/bus/iio/devices/iio:deviceX/fast_settling_average_factor
+KernelVersion:
+Contact:	[email protected]
+Description:
+		This attribute, if available, is used to activate or deactivate
+		fast settling mode and set the value of the average factor to
+		1, 2, 8 or 16. If the average factor is set to 1, the fast
+		settling mode is disabled. The data from the sinc filter is
+		averaged by chosen value. The averaging reduces the output data
+		rate for a given FS word, however, the rms noise improves.
+
+What:		/sys/bus/iio/devices/iio:deviceX/fast_settling_average_factor_available
+KernelVersion:
+Contact:	[email protected]
+Description:
+		Reading returns a list with the possible values for the fast
+		settling average factor: 1, 2, 8, 16.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
 KernelVersion:
 Contact:	[email protected]
drivers/iio/adc/ad7192.c +118 -12

234 lines not on this page · raw message

Signature · 1 line
2.34.1